Peter Hans Supancic

1 - 100 out of 178Page size: 100

Research output

  1. 2025
  2. Published

    Towards high-strength electrolyte-supported solid oxide fuel cells

    Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Estimation of residual stresses in single crystal sapphire wafers through eigenmode analysis

    Gruber, M., Kreith, J., Lohrasbi, S., Bermejo, R. & Supancic, P. H., 9 Jan 2025, In: Scripta Materialia. 259.2025, 1 April, 5 p., 116538.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2024
  5. Published

    Biaxial bending strength testing of uniaxially curved thin plates using a modified ball on three balls test

    Supancic, P., Maurer, F. & Danzer, R., 1 Sept 2024, In: Journal of non-crystalline solids. 639, 123067.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    The Ball-on-Three-Balls strength test: Effective volumes and surfaces for Weibull strength scaling

    Staudacher, M., Eggel, A. E., Supancic, P. H. & Lube, T., 2024, In: Journal of the European Ceramic Society. 44.2024, 1, p. 173-183 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2023
  8. Published

    The Ball-on-Ring-test: Enhancing an analytical solution by numerical analysis for elastic deformation and small displacements

    Staudacher, M., Supancic, P. & Lube, T., 16 Aug 2023, In: Journal of the European Ceramic Society. 43.2023, 15, p. 7167-7177 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    The B3B Strength test

    Staudacher, M., Lube, T. & Supancic, P. H., 30 Mar 2023.

    Research output: Contribution to conference › Poster › Research

  10. Published

    The Ball-on-Three-Balls strength test for discs and plates: Extending and simplifying stress evaluation

    Staudacher, M., Lube, T. & Supancic, P. H., Feb 2023, In: Journal of the European Ceramic Society. 43.2023, 2, p. 648-660 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2022
  12. Published

    Theory of asymmetric and piezotronically modified double Schottky barriers

    Kaufmann, B. & Supancic, P., 14 Oct 2022, In: Journal of applied physics. 132, 14

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Understanding and controlling inversion boundaries in ZnO

    Scheiber, D., Popov, M. N., Supancic, P. & Spitaler, J., 2022, In: Acta materialia. 229, 117804.

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2021
  16. Published

    A modelling approach to describe the DC current-voltage behaviour of low-voltage zinc oxide varistors

    Kaufmann, B., Billovits, T., Kratzer, M., Teichert, C. & Supancic, P., Jun 2021, In: Open ceramics. 6, June, 11 p., 100113.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

    Staudacher, M., Lube, T., Schlacher, J. & Supancic, P., Jun 2021, In: Open ceramics. 6, June, 10 p., 100101.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Local-probe based electrical characterization of a multiphase intermetallic γ-TiAl based alloy

    Kratzer, M., Huszar, M., Tengg, L. M., Billovits, T., Kaufmann, B., Supancic, P., Clemens, H., Mayer, S. & Teichert, C., 26 May 2021, In: Journal of applied physics. 129.2021, 20, 205107.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Measurement of the piezotronic effect on single grain boundaries in zinc oxide Varistors

    Billovits, T., Kaufmann, B. & Supancic, P., 26 May 2021, In: Open ceramics. 6, 100125.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

    Wallis, C., Buchmayr, B., Bermejo, R. & Supancic, P., 2021, In: Additive Manufacturing. 38.2021, February, 14 p., 101799.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Observation of an electrical breakdown at ZnO Schottky contacts in varistors

    Kaufmann, B., Billovits, T. & Supancic, P., 2021, In: Journal of the European Ceramic Society. 41, 3, p. 1969-1974

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2020
  23. Published

    A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

    Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Investigation of schottky barriers at Pd-ZnO junctions in varistors

    Kaufmann, B., Raidl, N. & Supancic, P. H., 2020, In: Journal of the European Ceramic Society. 40, 11, p. 3771-3775

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2019
  26. Published

    Modelling of the highly non-linear electrical behavior of ZnO varistor ceramics

    Kaufmann, B. & Supancic, P. H., 6 May 2019.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Biaxiale Festigkeitsprüfung von Keramiken

    Supancic, P. H., Lube, T. & Danzer, R., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

    Klünsner, T., Jonke, M., Supancic, P., Gettinger, C., Krobath, M., Lube, T., Marsoner, S. & Glätzle, J., 4 Jan 2019, In: International Journal of Refractory Metals and Hard Materials. 80, p. 97-103 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2018
  30. Published

    Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 5 Sept 2018, In: Materials and Design. 153, p. 221-231 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Understanding the effect of surface flaws on the strength distribution of brittle single crystals

    Gruber, M., Leitner, A., Kraleva, I. R., Kiener, D., Supancic, P. H. & Bermejo, R., 28 May 2018, In: Journal of the American Ceramic Society. 101, p. 5705–5716

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. & Danzer, R., 1 Apr 2018, In: Praktische Metallographie/Practical Metallography. 55, 4, p. 192-202 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Corrigendum to "Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials" [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2018, In: Journal of the European Ceramic Society. p. 355-358 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Current dominating paths through ZnO varistor ceramics

    Kaufmann, B., Hofstätter, M., Raidl, N. & Supancic, P. H., 2018.

    Research output: Contribution to conference › Paper

  37. Published

    Failure of Varistor Ceramics

    Danzer, R. & Supancic, P. H., 2018.

    Research output: Contribution to conference › Paper

  38. Published

    Fracture toughness of silicon nitride balls via thermal shock

    Strobl, S., Adlmann, F. A., Supancic, P., Lube, T., Danzer, R. & Schöppl, O., 2018, In: Journal of the European Ceramic Society. p. 1278–1287

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2017
  40. Published

    Strength distribution and fracture analyses of LiNbO3 and LiTaO3 single crystals under biaxial loading

    Gruber, M., Kraleva, I., Supancic, P., Bielen, J., Kiener, D. & Bermejo, R., Nov 2017, In: Journal of the European Ceramic Society. 37, 14, p. 4397-4406

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Influence of Surface Damage and Residual Stress on Strength of WC-Co Hard Metals under Biaxial Loading Conditions

    Harrer, W. S., Klünsner, T., Supancic, P. H., Jonke, M., Glätzle, J. & Barbist, R., 29 May 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics

    Gruber, M., Supancic, P., Aldrian, F. & Bermejo, R., 2017, In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Influence of ferroelectric domain texture on the performance of multilayer piezoelectric actuators

    Kaufmann, P., Röhrig, S., Supancic, P. & Deluca, M., 2017, In: Journal of the European Ceramic Society. 37, p. 2039-2046 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Influence of surface damage and residual stress on strength of WC-Co hard metals under biaxial loading conditions

    Harrer, W., Klünsner, T., Jonke, M., Supancic, P., Glätzle, J. & Barbist, R., 2017

    Research output: Non-textual form › Web publication/site › Research

  45. Published

    Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses

    Krautgasser, C., Bermejo, R., Supancic, P. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 1873-1878 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. H. & Danzer, R., 2017, Praktische Metallographie Sonderband. Vol. 51. p. 85-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Piezotronic Effect on Electrical Characteristics of Bulk ZnO Varistors

    Raidl, N., Hofstätter, M. & Supancic, P. H., 2017, In: Advanced engineering materials. 19, 4

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Strength of WC-Co hard metals as a function of the effectively loaded volume

    Jonke, M., Klünsner, T., Supancic, P., Harrer, W., Glätzle, J., Barbist, R. & Ebner, R., 2017, In: International journal of refractory metals & hard materials. 64, p. 219-224 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

    Strobl, S., Lube, T., Supancic, P., Schöppl, O. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5065-5070 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2016
  51. Published

    Effects of subcritical crack growth on the determination of fracture toughness in brittle materials

    Krautgasser, C., Chlup, Z., Supancic, P., Danzer, R. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 1307-1312 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses

    Krautgasser, C., Danzer, R., Deluca, M., Supancic, P., Aldrian, F. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 4095-4105 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2015
  55. Published

    Thermography and complementary measurements as tools to detect micro-irregularities in electronic components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., Dec 2015, In: Journal of ceramic science and technology. 6, 4, p. 255-260 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  57. Published

    Piezotronically Modified I-V Characteristics of ZnO Varistor Ceramics

    Hofstätter, M., Raidl, N. & Supancic, P., 25 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  58. Published

    Heat development at the microscale in ceramic components - thermography and complementary tools

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 1 Apr 2015

    Research output: Other contribution › Research

  59. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  60. Published

    Impact of the Piezotronic Effect on Metal-Oxide Varistor Properties

    Raidl, N., Hofstätter, M. & Supancic, P., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Influence of temperature and humidity on the strength of Low Temperature Co-fired Ceramics

    Krautgasser, C., Danzer, R., Supancic, P. & Bermejo, R., 2015, In: Journal of the European Ceramic Society. 35, p. 1823–1830

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Lock-In Infrared Microscopy on ZnO Ceramics - A Complementary Investigation Technique for the Analysis of Functional Electroceramic Components

    Hofstätter, M., Raidl, N., Sartory, B. & Supancic, P., 2015, In: Microscopy and microanalysis. 21, p. 1145-1152 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Modelling The Piezotronically Modified I-V Characteristics of ZnO Varistor Ceramics

    Raidl, N., Hofstätter, M. & Supancic, P., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Piezotronically Modified Double Schottky Barriers in ZnO Varistors

    Raidl, N., Supancic, P., Danzer, R. & Hofstätter, M., 2015, In: Advanced materials. 27, p. 2031-2035 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling

    Röhrig, S., Krautgasser, C., Bermejo, R., Jones, J. L., Supancic, P. & Deluca, M., 2015, In: Journal of the European Ceramic Society. 35, p. 4321-4325 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Thermography and Complemetary Measurements as Tool to Detect Micro-Irregularities in Electronic Components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 2015, In: Journal of ceramic science and technology. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Varistor piezotronics: Mechanically tuned conductivity in varistors

    Baraki, R., Novak, N., Hofstätter, M., Supancic, P., Rödel, J. & Frömling, T., 2015, In: Journal of applied physics. 118, 8, p. 085703 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. 2014
  69. Published

    Piezotronic Modification of Double-Schottky-Barriers in ZnO Varistor Ceramics

    Hofstätter, M., Raidl, N., Nevosad, A., Teichert, C. & Supancic, P., 16 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  70. Published

    Evaluation of subcritical crack growth in low temperature co-fired ceramics

    Bermejo, R., Supancic, P., Krautgasser, C. & Danzer, R., 10 Jan 2014, Mechanical Properties and Performance of Engineering Ceramics and Composites VIII - A Collection of Papers Presented at the 37th International Conf. on Advanced Ceramics and Composites, ICACC 2013. 2 ed. Vol. 34. p. 161-172 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    A new strength test for ceramic cylinders-The Notched Roller Test

    Strobl, S., Supancic, P., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 2575-2584

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Current-voltage characteristics of zinc oxide varistors with respect to mechanical load

    Raidl, N., Hofstätter, M. & Supancic, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    Effect of residuel stresses on the strength of glass-ceramic multilayer composites different microstructures

    Bermejo Moratinos, R., Krautgasser, C., Deluca, M., Strobl, S., Kraleva, I., Petschenig, I., Aldrian, F., Supancic, P. & Danzer, R., 2014, Praktische Metallographie Sonderband. p. 169-174

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  74. Published

    Load Characteristics of Lead-Free Ceramic Multilayer Actuators Based on Bismuth–Sodium–Titanate

    Reichmann, K., Schütz, D., Deluca, M. & Supancic, P., 2014, In: International journal of applied ceramic technology. 11, p. 431-435

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  77. Published

    Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Microanalysis on Functional Ceramics: Complementary Investigation Techniques on ZnO-based Varistor Ceramics

    Supancic, P., Raidl, N. & Hofstätter, M., 2014, Proc. of 11th EMAS Regional Workshop on Electron Probe Microanalysis of Materials Today. p. 313-325

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Micro four-point probe investigation of individual ZnO grain boundaries in avaristor ceramic

    Nevosad, A., Hofstätter, M., Supancic, P., Danzer, R. & Teichert, C., 2014, In: Journal of the European Ceramic Society. 34, p. 1963-1970

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    On Bürmann's theorem and its application to problems of linear and nonlinear heat transfer and diffusion - Expanding functions in powers of their derivative

    Schöpf, H. & Supancic, P., 2014, In: The mathematica journal. 16, p. 1-44

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Precise determination of phonon constants in lead-free monoclinic (K 0.5Na0.5)NbO3 single crystals

    Rafiq, M. A., Supancic, P., Costa, E. E., Vilarinho, P. M. & Deluca, M., 2014, In: Applied physics letters. 104, p. 011902-011902

    Research output: Contribution to journal › Article › Research › peer-review

  82. 2013
  83. Published

    3D Netzwerksimulationen von Varistoren mit verschiedenen Korngrößenverteilungen

    Hofstätter, M. & Supancic, P., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 206-2010

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    C-AFM and KPFM approach to inverstigate the electrical properties of single grain boundaries in ZnO varistor devices

    Nevosad, A., Hofstätter, M., Wiessner, M., Supancic, P. & Teichert, C., 2013, Proc. of SPIE, Oxide-based Materials and Devices IV. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Effect of the electric conductivity on the modeling of the poling process of ferroelectric components

    Schwaab, H., Deluca, M., Supancic, P. & Kamlah, M., 2013, In: Journal of the mechanics and physics of solids. 61, p. 504-516

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Mechanical Properties of Ceramics

    Danzer, R., Lube, T., Morrell, R. & Supancic, P., 2013, Handbook of Advanced Ceramics. Amsterdam: Elsevier, p. 609-632

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  87. Published

    Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

    Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, In: Engineering Fracture Mechanics. 100, p. 108-121

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Voltage polarity dependent current paths through polycrystalline ZnO varistors

    Hofstätter, M., Nevosad, A., Teichert, C., Supancic, P. & Danzer, R., 2013, In: Journal of the European Ceramic Society. 33, p. 3473-3476

    Research output: Contribution to journal › Article › Research › peer-review

  89. 2012
  90. Published

    Effect of combined thermo-mechanical loading on the domain texture and the fracture resistance of lead zirconate titanate (PZT) ceramics

    Deluca, M., Krautgasser, C., Bermejo Moratinos, R., Foronda, H., Jones, J. & Supancic, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Exact implementation of subcritical crack growth into a Weibullian strength distribution under constant stress rate conditions

    Supancic, P. & Schöpf, H. M., 2012, In: Journal of the European Ceramic Society. 32, p. 4031-4040

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Experimental approach to assess the effect of metallization on the strength of functional ceramic components

    Bermejo Moratinos, R., Supancic, P., Aldrian, F. & Danzer, R., 2012, In: Scripta materialia. 66, p. 546-549

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Influence of measurement uncertainties on the determination of the Weibull modulus

    Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 251-255

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Macroscopical non-linear material model for ferroelectric materials inside a hybrid finite element formulation

    Schwaab, H., Grünbichler, H., Supancic, P. & Kamlah, M., 2012, In: International journal of solids and structures. 49, p. 457-469

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Microscopical investigation of grain boundaries in ZnO varistor ceramics

    Nevosad, A., Hofstätter, M., Supancic, P. & Teichert, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    New Self-regulating Ceramic PTC Thermistor Heating Elements with Strongly Improved Performance

    Röhrig, S. & Supancic, P., 2012, In: Ceramic forum international (CFI). 89, p. E25-E29

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Polarity-dependent electrical characteristics of ZnO varistor ceramics

    Hofstätter, M., Nevosad, A., Auer, C., Piber, M. & Supancic, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. Published

    Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength

    Lube, T., Witschnig, S., Supancic, P., Danzer, R. & Schöppl, O., 2012, Fractography of Glasses and Ceramics VI. p. 225-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  101. Published

    Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2011
  103. Published

    AFM Based Investigations of ZnO Varistor Ceramics

    Pavitschitz, A., Hofstätter, M., Supancic, P., Athenstaedt, W., Auer, C. & Teichert, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  104. Published

    Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die Festigkeit

    Bermejo Moratinos, R., Sestakova, L., Kraleva, I., Supancic, P. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  105. Published

    Effect of specimen size on the tensile strength of WC–Co hard metal

    Klünsner, T., Wurster, S., Supancic, P., Ebner, R., Jenko, M., Glätzle, J., Püschel, A. & Pippan, R., 2011, In: Acta materialia. 59, p. 4244-4252

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Evaluation of the Strength of Low Temperature Co-fired Ceramics under Biaxial Stress

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Krautgasser, C., Aldrian, F., Morrell, R. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  107. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, Key engineering materials. Vol. 465. p. 41-46 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  108. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Influence of the Load Dependent Material Properties on the Performance of Multilayer Piezoelectric Actuators

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Krautgasser, C. & Supancic, P., 2011, IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials. p. 243-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    Numerical investigation of the process of embedding components into printed circuit boards

    Pletz, M., Bermejo, R., Supancic, P., Stahr, J. & Morianz, M., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765814

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Morrell, R. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 745-753

    Research output: Contribution to journal › Article › Research › peer-review

  114. 2010
  115. Published

    Fracture behaviour of low temperature cofired ceramics under biaxial loading: Influence of metal-ceramic internal architecture

    Bermejo, R., Kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 1 Dec 2010.

    Research output: Contribution to conference › Paper › peer-review

  116. Published

    Characterisation and modelling of the mechanical reliability of semiconductor components for Printed Circuit Boards

    Bermejo Moratinos, R., Deluca, M., pletz, M., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 Next
View graph of relations

Contact

Phone: 4109

Latest Research Output

View more (178)