Daniel Kiener

151 - 200 out of 336Page size: 50

Research output

  1. 2017
  2. Published

    Selective interface toughness measurements of layered thin films

    Konetschnik, R., Daniel, R., Brunner, R. & Kiener, D., 9 Mar 2017, In: AIP Advances. 7.2017, 3, 5 p., 035307.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Source rock assessment from basin- to nano-scale: A case study from the Ukrainian Dniepr-Donets Basin

    Misch, D., Groß, D., Klaver, J., Schmatz, J., Sachsenhofer, R., Bechtel, A., Maier-Kiener, V., Kiener, D. & Mendez Martin, F., Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  4. E-pub ahead of print

    The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

    Howard, C. B., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P. M., 22 Jan 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687.2017, 27 February, p. 313-322 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Accelerated thermo-mechanical fatigue of copper metallizations studied by pulsed laser heating

    Wurster, S., Bigl, S., Cordill, M. & Kiener, D., 5 Jan 2017, In: Microelectronic engineering. 167.2017, 5 January, p. 110-118 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Locally resolved fracture mechanisms by using in-situ microscopic testing

    Alfreider, M., Kozic, D., Kolednik, O. & Kiener, D., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    The influence of proton irradiation on the mechanical behaviour in nanocrystalline austenitic steels

    Alfreider, M., Hosemann, P. & Kiener, D., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. 2016
  9. Published

    Correlative microstructure and topography informed nanoindentation of copper films

    Bigl, S., Schöberl, T., Wurster, S., Cordill, M. & Kiener, D., 25 Dec 2016, In: Surface & coatings technology. 308.2016, 25 December, p. 404-413 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    The effect of size on the strength of FCC metals at elevated temperatures: annealed copper

    Wheeler, J. M., Kirchlechner, C., Micha, J.-S., Michler, J. & Kiener, D., 1 Dec 2016, In: Philosophical magazine. 96.2016, 32-34, p. 3379-3395 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Extraction of flow behavior and hall–petch parameters using a nanoindentation multiple sharp tip approach

    Leitner, A., Maier-Kiener, V. & Kiener, D., 29 Nov 2016, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 9 p., 1600669.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Miniaturized Fracture Mechanics for Multi-layered Thin Film Systems

    Konetschnik, R., Kozic, D., Schöngrundner, R., Ganser, H. P., Brunner, R. & Kiener, D., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  15. Published

    Synthesis and Mechanical Characterisation of an Ultra-Fine Grained Ti-Mg Composite

    Alfreider, M., Jeong, J., Esterl, R., Oh, S. H. & Kiener, D., 11 Aug 2016, In: Materials. 9.2016, 8, 10 p., 688.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Advanced characterisation of thermo-mechanical fatigue mechanisms of different copper film systems for wafer metallizations

    Bigl, S., Wurster, S., Cordill, M. & Kiener, D., 1 Aug 2016, In: Thin solid films. 612.2016, 1 August, p. 153-164 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour

    Reiser, J., Wurster, S., Hoffmann, J., Bonk, S., Bonnekoh, C., Kiener, D., Pippan, R., Hoffmann, A. & Rieth, M., 1 Aug 2016, In: International journal of refractory metals & hard materials. 58.2016, August, p. 22-33 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Strain-rate sensitivity of ultrafine-grained materials and composites

    Kiener, D., Leitner, A. & Maier-Kiener, V., 4 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Deformation behaviour of BCC metals investigated by small- and macro-scale testing techniques

    Fritz, R., Wimler, D., Famelton, J., Leitner, A., Maier-Kiener, V. & Kiener, D., 31 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    Multilayer thin films: How residual stresses influence the fracture properties

    Konetschnik, R., Kozic, D., Brunner, R., Ganser, H. P. & Kiener, D., 31 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Local deformation and fracture investigated using in situ electron microscopy

    Kiener, D., Imrich, P., Lee, S., Jeong, J., Hintsala, E., Konetschnik, R. & Oh, S. H., 30 May 2016.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Deformation Characteristics of Ultra-fine Grained BCC Metals at Ambient and Elevated Temperatures

    Kiener, D., Fritz, R., Wimler, D., Leitner, A. & Maier-Kiener, V., 12 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  23. E-pub ahead of print

    FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior

    Lee, S., Jeong, J., Kim, Y., Han, S. M., Kiener, D. & Oh, S. H., 24 Mar 2016, (E-pub ahead of print) In: Acta materialia. 110.2016, 15 May, p. 283-294 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Low cycle fatigue of Cu thin films: Novel approaches for thermomechanical testing & microstructural analysis

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 22 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Residual Stresses and Fracture Toughness in Multi-layered Thin Film Systems

    Konetschnik, R., Kozic, D., Schöngrundner, R., Ganser, H. P., Brunner, R. & Kiener, D., 15 Mar 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Kiener, D., Leitner, A. & Pippan, R., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    In-situ investigation of rate dependent material properties under non-ambient conditions: Challenges, limitations & insights

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Towards nanoscale in-situ fatigue and fracture experiments in the TEM

    Imrich, P. & Kiener, D., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Plastic deformation in sub-micron dimensions: Insights from advanced in-situ testing techniques

    Kiener, D., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Thermally Activated Deformation Processes in Body-Centered Cubic Cr – How Microstructure Influences Strain-Rate Sensitivity

    Maier-Kiener, V., Kiener, D., Pippan, R. & Hohenwarter, A., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  31. E-pub ahead of print

    Miniaturized fracture experiments to determine the toughness of individual films in a multilayer system

    Konetschnik, R., Kozic, D., Schöngrundner, R., Kolednik, O., Gänser, H.-P., Brunner, R. & Kiener, D., 25 Jan 2016, (E-pub ahead of print) In: Extreme Mechanics Letters. 8.2016, September, p. 235-244 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Advanced Characterization of thermo-mechanical fatigue mechanisms for semiconductor metallizations

    Bigl, S., Wurster, S., Schöberl, T., Cordill, M. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Contribution of Free Surface and Dislocation Density to the Strength Scaling Behaviour in Ultrafine-grained BCC Chromium

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In: Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Does dynamic nanoindentation testing influence the acquired mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Dynamic indentation testing: Is there an influence on mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    High resolution determination of local residual stress gradients in single- and multilayer thin film systems

    Treml, R., Kozic, D., Zechner, J., Maeder, X., Gänser, H.-P., Schöngrundner, R., Michler, J., Brunner, R. & Kiener, D., 2016, In: Acta materialia. 103, p. 616-623

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Influence of Free Surface on the Deformation Behaviour of ufg Chromium at Ambient & Elevated Temperatures

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  40. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In: Acta materialia. 121.2016, December, p. 104-116 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Microstructural and mechanical investigations of thermo-mechanically loaded Cu films using a thermal laser cycling device

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 2016.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Miniaturized Fracture Concepts for Stressed Multi-layer Thin Film Systems

    Konetschnik, R., Kozic, D., Schöngrundner, R., Ganser, H. P., Brunner, R. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Leitner, T., Kiener, D. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  44. 2015
  45. Published

    Thermally Activated Deformation Behavior of ufg-Au: Environmental Issues During Long-Term and High-Temperature Nanoindentation Testing

    Maier, V., Leitner, A., Pippan, R. & Kiener, D., 1 Dec 2015, In: JOM. 67, 12, p. 2934-2944 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Tracking of Grain Boundary Movement Due to (Thermo-) Mechanical Deformation

    Wurster, S., Bigl, S., Renk, O., Cordill, M. J., Hohenwarter, A., Pippan, R. & Kiener, D., 24 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    In-Situ Measurements of Free-Standing, Ultra-Thin Film Cracking in Bending

    Hintsala, E., Kiener, D., Jackson, J. & Gerberich, W. W., 1 Nov 2015, In: Experimental mechanics. 55, 9, p. 1681-1690 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 19 May 2015, In: JOM. 67, 8, p. 1704 1712 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Fracture mechanics of thin film systems on the sub-micron scale

    Kozic, D., Treml, R., Schongrundner, R., Brunner, R., Kiener, D., Zechner, J., Antretter, T. & Ganser, H. P., 6 May 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2015. Institute of Electrical and Electronics Engineers, 7103088

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Microstructure and mechanical properties of CuxNb1- x alloys prepared by ball milling and high pressure torsion compacting

    Abad, M. D., Parker, S., Kiener, D., Primorac, M. M. & Hosemann, P., 5 May 2015, In: Journal of alloys and compounds. 630, p. 117-125 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 15 Apr 2015, In: Scripta materialia. 100, p. 94-97 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Influence of Microstructure on the Deformation Behaviour of Chromium

    Fritz, R., Wimler, D., Krautgasser, C., Leitner, A., Maier, V. & Kiener, D., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research

  53. Published

    Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

    Maier, V., Hohenwarter, A., Pippan, R. & Kiener, D., 31 Mar 2015, In: Scripta materialia. 106, p. 42-45 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Latest Research Output

View more (336)