Daniel Kiener

101 - 200 out of 336Page size: 100

Research output

  1. 2019
  2. Published

    Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers

    Wang, Y. Q., Fritz, R., Kiener, D., Zhang, J. Y., Liu, G., Kolednik, O., Pippan, R. & Sun, J., 7 Sept 2019, In: Acta Materialia. 180.2019, November, p. 73-83 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature

    Issa, I., Hohenwarter, A., Fritz, R. & Kiener, D., 20 May 2019, In: Journal of Materials Research. 2019

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    TEM characterisation and Raman spectroscopy of vitrinite

    Vranjes-Wessely, S., Misch, D., Kiener, D., Rantitsch, G., Groß, D. & Sachsenhofer, R., May 2019, p. 459. 460 p.

    Research output: Contribution to conference › Abstract › peer-review

  5. Published

    Rate limiting deformation mechanisms of bcc metals in confined volumes

    Kiener, D., Fritz, R., Alfreider, M., Leitner, A., Pippan, R. & Maier-Kiener, V., 1 Mar 2019, In: Acta Materialia. 166.2019, March, p. 687-701 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase

    Wat, A., Lee, J. I., Ryu, C. W., Gludovatz, B., Kim, J., Tomsia, A. P., Ishikawa, T., Schmitz, J., Meyer, A., Alfreider, M., Kiener, D., Park, E. S. & Ritchie, R. O., 27 Feb 2019, In: Nature Communications. 10.2019, 1, 12 p., 961.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation

    Renk, O., Maier-Kiener, V., Issa, I., Li, J. H., Kiener, D. & Pippan, R., 15 Feb 2019, In: Acta materialia. 165.2019, 165, p. 409-419 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Thermally activated deformation mechanisms – High temperature nanoindentation on W-Re alloys

    Kappacher, J., Wurmshuber, M., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Ultrafine-grained Tungsten by High-Pressure Torsion – Bulk precursor versus powder processing route

    Wurmshuber, M., Doppermann, S., Wurster, S. & Kiener, D., 2019, IOP Conference Series: Materials Science and Engineering. Vol. 580. 012051

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. 2018
  11. Published

    Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities

    Kozic, D., Gänser, H.-P., Brunner, R., Kiener, D., Antretter, T. & Kolednik, O., 31 Dec 2018, In: Thin solid films. p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag

    Wurmshuber, M., Frazer, D., Bachmaier, A., Wang, Y., Hosemann, P. & Kiener, D., 1 Nov 2018, (E-pub ahead of print) In: Materials and Design. 160.2018, 15 December, p. 1148-1157 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Mechanical properties of coal macerals: A nanoindentation study

    Vranjes-Wessely, S., Misch, D., Schöberl, T., Kiener, D., Groß, D. & Sachsenhofer, R., 25 Sept 2018.

    Research output: Contribution to conference › Abstract › peer-review

  14. Published

    Fracture mechanics of micro samples: Fundamental considerations

    Pippan, R., Wurster, S. & Kiener, D., 5 Sept 2018, In: Materials and Design. 159.2018, 5 December, p. 252-267

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 5 Sept 2018, In: Materials and Design. 153, p. 221-231 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Linking Macroscopic Fracture Properties to Single Dislocation Processes

    Issa, I., Alfreider, M., Kozic, D., Kolednik, O., Sandfeld, S. & Kiener, D., Aug 2018, In: Microscopy and microanalysis. 24.2018, Supplement S1, p. 2184-2185 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Nanoindentation study of macerals in coals from the Ukrainian Donets Basin

    Vranjes-Wessely, S., Misch, D., Schöberl, T., Kiener, D., Groß, D. & Sachsenhofer, R., Aug 2018, In: Advances in Geosciences. 2018, 45

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Constituent constraining effects on the microstructural evolution, ductility, and fracture mode of crystalline/amorphous nanolaminates

    Wang, Y., Kiener, D., Liang, X., Bian, J., Wu, K., Zhang, J., Liu, G. & Sun, J., 19 Jul 2018, In: Journal of alloys and compounds. 768.2018, 5 November, p. 88-96 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency

    Jeong, J., Alfreider, M., Konetschnik, R., Kiener, D. & Oh, S. H., 18 Jul 2018, (E-pub ahead of print) In: Acta Materialia. 158.2018, 1 October, p. 407-421 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Universally scaling Hall-Petch-like relationship in metallic glass matrix composites

    Liu, Y. Y., Liu, P. Z., Li, J. J., Liaw, P. K., Spieckermann, F., Kiener, D., Qiao, J. W. & Eckert, J., Jun 2018, In: International journal of plasticity. 105.2018, June, p. 225-238 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Understanding the effect of surface flaws on the strength distribution of brittle single crystals

    Gruber, M., Leitner, A., Kraleva, I. R., Kiener, D., Supancic, P. H. & Bermejo, R., 28 May 2018, In: Journal of the American Ceramic Society. 101, p. 5705–5716

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation

    Leitner, A., Maier-Kiener, V. & Kiener, D., 24 May 2018, In: Nanomaterials. 8.2018, 6, p. 1-12 12 p., 366.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves

    Leitner, A., Maier-Kiener, V. & Kiener, D., 15 May 2018, In: Materials and Design. 146.2018, May, p. 69-80 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Unzerstörbares Material: Krone der Wissenschaft

    Kiener, D., 17 Apr 2018, In: Kronen-Zeitung. p. 34

    Research output: Contribution to journal › Article › Transfer

  26. Published

    Micromechanical properties of macerals in coals from the Ukrainian Donets Basin: maturity trends and implications for unconventional hydrocarbon production

    Vranjes, S., Schöberl, T., Misch, D., Kiener, D. & Sachsenhofer, R., Apr 2018.

    Research output: Contribution to conference › Abstract › peer-review

  27. E-pub ahead of print

    In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing

    Alfreider, M., Kozic, D., Kolednik, O. & Kiener, D., 27 Mar 2018, (E-pub ahead of print) In: Materials and Design. 148.2018, 15 June, p. 177-187 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Nanoindentation creep behavior of Cu–Zr metallic glass films

    Wang, Y., Zhang, J., Wu, K., Liu, G., Kiener, D. & Sun, J., 2 Jan 2018, In: Materials Research Letters [Elektronische Ressource]. 6.2018, 1, p. 22-28 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Challenges and solutions in conducting elastic-plastic fracture mechanics experiments inside an SEM

    Alfreider, M., Kozic, D. (Co-editor), Kolednik, O. (Co-editor) & Kiener, D. (Co-editor), 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Spherical nanoindentation as an efficient tool to assess thermo-mechanical behavior of nanoporous Au

    Leitner, A., Maier-Kiener, V. & Kiener, D., 2018.

    Research output: Contribution to conference › Poster › Research

  31. 2017
  32. Published

    Daniel Kiener is awarded an ERC Consolidator Grant

    Kiener, D., 21 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  33. Published

    Am Weg zu unzerstörbaren Werkstoffen

    Kiener, D., 14 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  34. Published

    2 Millionen für Super-Werkstoffe

    Kiener, D., 7 Dec 2017, In: Kleine Zeitung - Helle Köpfe. p. 30

    Research output: Contribution to journal › Article › Transfer

  35. Published

    Auf dem Weg zu unzerstörbaren Werkstoffen

    Kiener, D., 5 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  36. Published

    Auf dem Weg zu unzerstörbaren Werkstoffen

    Kiener, D., 5 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  37. Published

    Auf dem Weg zu unzerstörbaren Werkstoffen

    Kiener, D., 4 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  38. Published

    Masing-Gedächtnispreis 2017

    Kiener, D., Dec 2017, In: Triple m. 2017, 5, p. 19 1 p.

    Research output: Contribution to journal › Article › Transfer

  39. Published

    Unzerstörbare Werkstoffe

    Kiener, D., Dec 2017, In: Triple m. 5, p. 12

    Research output: Contribution to journal › Article › Transfer

  40. Published

    ERC Grants bringen zehn Millionen Euro nach Österreich

    Kiener, D., 28 Nov 2017, In: Wiener Zeitung.

    Research output: Contribution to journal › Article › Transfer

  41. Published

    Neues Kapitel in ERC-Erfolgsgeschichte: Zehn Consolidator Grants gehen nach Österreich

    Kiener, D., 28 Nov 2017

    Research output: Non-textual form › Web publication/site › Transfer

  42. Published

    Zehn hochdotierte EU-Förderpreise

    Kiener, D., 28 Nov 2017

    Research output: Non-textual form › Web publication/site › Transfer

  43. Published

    Zehn Millionen-Förderungen des EU-Forschungsrats nach Österreich

    Kiener, D., 28 Nov 2017

    Research output: Non-textual form › Web publication/site › Transfer

  44. Published

    Zehn Millionen-Förderungen des EU-Forschungsrats nach Österreich

    Kiener, D., 28 Nov 2017

    Research output: Non-textual form › Web publication/site › Transfer

  45. Published

    Substrate-Influenced Thermo-Mechanical Fatigue of Copper Metallizations: Limits of Stoney's equation

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 9 Nov 2017, In: Materials. 10.2017, 11, 8 p., 1287.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Development and application of a heated in-situ SEM micro-testing device

    Fritz, R. & Kiener, D., 1 Nov 2017, In: Measurement. 110.2017, November, p. 356-366 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Nov 2017, In: Acta materialia. 140.2017, November, p. 176-187 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Strength distribution and fracture analyses of LiNbO3 and LiTaO3 single crystals under biaxial loading

    Gruber, M., Kraleva, I., Supancic, P., Bielen, J., Kiener, D. & Bermejo, R., Nov 2017, In: Journal of the European Ceramic Society. 37, 14, p. 4397-4406

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    Laser Ultrasonic Thin Film Characterization of Si-Cu-Al-Cu Multi-Layered Stacks

    Grünwald, E., Nuster, R., Paltauf, G., Maier, T., Wimmer-Teubenbacher, R., Konetschnik, R., Kiener, D., Leitgeb, V., Köck, A. & Brunner, R., 19 Sept 2017, (E-pub ahead of print) In: Materials Today: Proceedings. 4.2017, 7, Part 2, p. 7122-7127 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Dynamic nanoindentation testing: is there an influence on a material’s hardness?

    Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Jun 2017, In: Materials Research Letters [Elektronische Ressource]. 5.2017, 7, p. 486-493 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Film thickness dependent microstructural changes of thick copper metallizations upon thermal fatigue

    Bigl, S., Trost, C. O. W., Wurster, S., Cordill, M. J. & Kiener, D., 1 Jun 2017, In: Journal of materials research (JMR). 32.2017, 11, p. 2022-2034 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    750 Schüler durften selbst forschen

    Kiener, D., 18 May 2017

    Research output: Non-textual form › Web publication/site › Transfer

  53. Published

    The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation

    Pfeifenberger, M. J., Mangang, M., Wurster, S., Reiser, J., Hohenwarter, A., Pfleging, W., Kiener, D. & Pippan, R., 5 May 2017, In: Materials and Design. 121.2017, 5 May, p. 109-118 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Selective interface toughness measurements of layered thin films

    Konetschnik, R., Daniel, R., Brunner, R. & Kiener, D., 9 Mar 2017, In: AIP Advances. 7.2017, 3, 5 p., 035307.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Source rock assessment from basin- to nano-scale: A case study from the Ukrainian Dniepr-Donets Basin

    Misch, D., Groß, D., Klaver, J., Schmatz, J., Sachsenhofer, R., Bechtel, A., Maier-Kiener, V., Kiener, D. & Mendez Martin, F., Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  56. E-pub ahead of print

    The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

    Howard, C. B., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P. M., 22 Jan 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687.2017, 27 February, p. 313-322 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Accelerated thermo-mechanical fatigue of copper metallizations studied by pulsed laser heating

    Wurster, S., Bigl, S., Cordill, M. & Kiener, D., 5 Jan 2017, In: Microelectronic engineering. 167.2017, 5 January, p. 110-118 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Locally resolved fracture mechanisms by using in-situ microscopic testing

    Alfreider, M., Kozic, D., Kolednik, O. & Kiener, D., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    The influence of proton irradiation on the mechanical behaviour in nanocrystalline austenitic steels

    Alfreider, M., Hosemann, P. & Kiener, D., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. 2016
  61. Published

    Correlative microstructure and topography informed nanoindentation of copper films

    Bigl, S., Schöberl, T., Wurster, S., Cordill, M. & Kiener, D., 25 Dec 2016, In: Surface & coatings technology. 308.2016, 25 December, p. 404-413 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    The effect of size on the strength of FCC metals at elevated temperatures: annealed copper

    Wheeler, J. M., Kirchlechner, C., Micha, J.-S., Michler, J. & Kiener, D., 1 Dec 2016, In: Philosophical magazine. 96.2016, 32-34, p. 3379-3395 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. E-pub ahead of print

    Extraction of flow behavior and hall–petch parameters using a nanoindentation multiple sharp tip approach

    Leitner, A., Maier-Kiener, V. & Kiener, D., 29 Nov 2016, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 9 p., 1600669.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Miniaturized Fracture Mechanics for Multi-layered Thin Film Systems

    Konetschnik, R., Kozic, D., Schöngrundner, R., Ganser, H. P., Brunner, R. & Kiener, D., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  67. Published

    Synthesis and Mechanical Characterisation of an Ultra-Fine Grained Ti-Mg Composite

    Alfreider, M., Jeong, J., Esterl, R., Oh, S. H. & Kiener, D., 11 Aug 2016, In: Materials. 9.2016, 8, 10 p., 688.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Advanced characterisation of thermo-mechanical fatigue mechanisms of different copper film systems for wafer metallizations

    Bigl, S., Wurster, S., Cordill, M. & Kiener, D., 1 Aug 2016, In: Thin solid films. 612.2016, 1 August, p. 153-164 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour

    Reiser, J., Wurster, S., Hoffmann, J., Bonk, S., Bonnekoh, C., Kiener, D., Pippan, R., Hoffmann, A. & Rieth, M., 1 Aug 2016, In: International journal of refractory metals & hard materials. 58.2016, August, p. 22-33 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Strain-rate sensitivity of ultrafine-grained materials and composites

    Kiener, D., Leitner, A. & Maier-Kiener, V., 4 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  71. Published

    Deformation behaviour of BCC metals investigated by small- and macro-scale testing techniques

    Fritz, R., Wimler, D., Famelton, J., Leitner, A., Maier-Kiener, V. & Kiener, D., 31 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  72. Published

    Multilayer thin films: How residual stresses influence the fracture properties

    Konetschnik, R., Kozic, D., Brunner, R., Ganser, H. P. & Kiener, D., 31 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  73. Published

    Local deformation and fracture investigated using in situ electron microscopy

    Kiener, D., Imrich, P., Lee, S., Jeong, J., Hintsala, E., Konetschnik, R. & Oh, S. H., 30 May 2016.

    Research output: Contribution to conference › Presentation › Research

  74. Published

    Deformation Characteristics of Ultra-fine Grained BCC Metals at Ambient and Elevated Temperatures

    Kiener, D., Fritz, R., Wimler, D., Leitner, A. & Maier-Kiener, V., 12 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  75. E-pub ahead of print

    FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior

    Lee, S., Jeong, J., Kim, Y., Han, S. M., Kiener, D. & Oh, S. H., 24 Mar 2016, (E-pub ahead of print) In: Acta materialia. 110.2016, 15 May, p. 283-294 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Low cycle fatigue of Cu thin films: Novel approaches for thermomechanical testing & microstructural analysis

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 22 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  77. Published

    Residual Stresses and Fracture Toughness in Multi-layered Thin Film Systems

    Konetschnik, R., Kozic, D., Schöngrundner, R., Ganser, H. P., Brunner, R. & Kiener, D., 15 Mar 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  78. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Kiener, D., Leitner, A. & Pippan, R., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  79. Published

    In-situ investigation of rate dependent material properties under non-ambient conditions: Challenges, limitations & insights

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  80. Published

    Towards nanoscale in-situ fatigue and fracture experiments in the TEM

    Imrich, P. & Kiener, D., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  81. Published

    Plastic deformation in sub-micron dimensions: Insights from advanced in-situ testing techniques

    Kiener, D., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  82. Published

    Thermally Activated Deformation Processes in Body-Centered Cubic Cr – How Microstructure Influences Strain-Rate Sensitivity

    Maier-Kiener, V., Kiener, D., Pippan, R. & Hohenwarter, A., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  83. E-pub ahead of print

    Miniaturized fracture experiments to determine the toughness of individual films in a multilayer system

    Konetschnik, R., Kozic, D., Schöngrundner, R., Kolednik, O., Gänser, H.-P., Brunner, R. & Kiener, D., 25 Jan 2016, (E-pub ahead of print) In: Extreme Mechanics Letters. 8.2016, September, p. 235-244 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Advanced Characterization of thermo-mechanical fatigue mechanisms for semiconductor metallizations

    Bigl, S., Wurster, S., Schöberl, T., Cordill, M. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  85. Published

    Contribution of Free Surface and Dislocation Density to the Strength Scaling Behaviour in Ultrafine-grained BCC Chromium

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  86. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In: Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Does dynamic nanoindentation testing influence the acquired mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  88. Published

    Dynamic indentation testing: Is there an influence on mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  89. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    High resolution determination of local residual stress gradients in single- and multilayer thin film systems

    Treml, R., Kozic, D., Zechner, J., Maeder, X., Gänser, H.-P., Schöngrundner, R., Michler, J., Brunner, R. & Kiener, D., 2016, In: Acta materialia. 103, p. 616-623

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Influence of Free Surface on the Deformation Behaviour of ufg Chromium at Ambient & Elevated Temperatures

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  92. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In: Acta materialia. 121.2016, December, p. 104-116 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Microstructural and mechanical investigations of thermo-mechanically loaded Cu films using a thermal laser cycling device

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 2016.

    Research output: Contribution to conference › Poster › Research

  94. Published

    Miniaturized Fracture Concepts for Stressed Multi-layer Thin Film Systems

    Konetschnik, R., Kozic, D., Schöngrundner, R., Ganser, H. P., Brunner, R. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  95. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Leitner, T., Kiener, D. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  96. 2015
  97. Published

    Thermally Activated Deformation Behavior of ufg-Au: Environmental Issues During Long-Term and High-Temperature Nanoindentation Testing

    Maier, V., Leitner, A., Pippan, R. & Kiener, D., 1 Dec 2015, In: JOM. 67, 12, p. 2934-2944 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Tracking of Grain Boundary Movement Due to (Thermo-) Mechanical Deformation

    Wurster, S., Bigl, S., Renk, O., Cordill, M. J., Hohenwarter, A., Pippan, R. & Kiener, D., 24 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  99. Published

    In-Situ Measurements of Free-Standing, Ultra-Thin Film Cracking in Bending

    Hintsala, E., Kiener, D., Jackson, J. & Gerberich, W. W., 1 Nov 2015, In: Experimental mechanics. 55, 9, p. 1681-1690 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 19 May 2015, In: JOM. 67, 8, p. 1704 1712 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Fracture mechanics of thin film systems on the sub-micron scale

    Kozic, D., Treml, R., Schongrundner, R., Brunner, R., Kiener, D., Zechner, J., Antretter, T. & Ganser, H. P., 6 May 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2015. Institute of Electrical and Electronics Engineers, 7103088

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Microstructure and mechanical properties of CuxNb1- x alloys prepared by ball milling and high pressure torsion compacting

    Abad, M. D., Parker, S., Kiener, D., Primorac, M. M. & Hosemann, P., 5 May 2015, In: Journal of alloys and compounds. 630, p. 117-125 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 15 Apr 2015, In: Scripta materialia. 100, p. 94-97 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Influence of Microstructure on the Deformation Behaviour of Chromium

    Fritz, R., Wimler, D., Krautgasser, C., Leitner, A., Maier, V. & Kiener, D., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research

  105. Published

    Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

    Maier, V., Hohenwarter, A., Pippan, R. & Kiener, D., 31 Mar 2015, In: Scripta materialia. 106, p. 42-45 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Latest Research Output

View more (336)