Montanuniversität

Organisational unit: University

2201 - 2300 out of 33,892Page size: 100

Research output

  1. 2023
  2. Published

    Characterization of technologically produced carbon (CMP) applied in agriculture

    Abu Zahra, N., Prohaska, T., Bandoniene, D., Fernández Balado, C., Hood-Nowotny, R., Soja, G., Obenaus-Emler, R., Wagner, S. & Puschenreiter, M., 2 Feb 2023.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Closed-Pore Formation in Oxygen Electrodes for Solid Oxide Electrolysis Cells Investigated by Impedance Spectroscopy

    Krammer, M., Schmid, A., Nenning, A., Bumberger, A. E., Siebenhofer, M., Herzig, C., Limbeck, A., Rameshan, C., Kubicek, M. & Fleig, J., 2 Feb 2023, In: ACS Applied Materials and Interfaces. 15.2023, 6, p. 8076–8092 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Scanning inductive pulse phase thermography with changing scanning speed for non-destructive testing

    Tuschl, C., Oswald-Tranta, B., Agathocleous, T. & Eck, S., 2 Feb 2023, In: Quantitative InfraRed Thermography Journal. 21.2024, 3, p. 156-171 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?

    Antoni, M., Spieckermann, F., Plutta, N., Gammer, C., Kapp, M., Ramasamy, P., Polak, C., Pippan, R., Zehetbauer, M. J. & Eckert, J., 1 Feb 2023, In: Materials. 16.2023, 3, 14 p., 1260.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Critical comparison of experimental and computational fluid dynamic results for a sample introduction system in plasma spectrometry

    Fasch, E., Maier, H. (Co-editor), Landertshamer, F. (Co-editor), Weiß, C. (Co-editor), Prohaska, T. (Co-editor) & Wegscheider, W. (Co-editor), 1 Feb 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Laufende Aktivitäten zum Thema " Nachhaltiger Tunnelbau"

    Galler, R., 1 Feb 2023, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 2023, 182, p. 11 1 p.

    Research output: Contribution to journal › Article › Research

  8. Published

    Linzer Brandschutztage: ZaB - Zentrum am Berg , Ausbildungs- und Tagungszentrum

    Galler, R., 1 Feb 2023, 10 p.

    Research output: Other contribution › Research

  9. E-pub ahead of print

    Oxidation behavior of a cathodic arc evaporated Cr0.69Ta0.20B0.11N coating

    Kainz, C., Letofsky-Papst, I., Saringer, C., Krüger, H., Stark, A., Schell, N., Pohler, M. & Czettl, C., 1 Feb 2023, (E-pub ahead of print) In: Journal of vacuum science & technology / A (JVST). 41.2023, 2, 10 p., 023102.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Perspectives on Closure and Revitalisation of Extraction Sites and Sustainability: A Q-Methodology Study

    Streit, S., Tost, M. & Gugerell, K., 1 Feb 2023, In: Resources. 12.2023, 2, 17 p., 23.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Special Issue “Novel Structural and Functional Material Properties Enabled by Nanocomposite Design”

    Eckert, J. & Kiener, D., 1 Feb 2023, In: Nanomaterials. 13.2023, 3, 3 p., 586.

    Research output: Contribution to journal › Editorial › peer-review

  12. Published

    Spontaneous formation of carbon dots helps to distinguish molecular fluorophores species

    Gómez, I. J., Vazquez Sulleiro, M., Pizúrová, N., Bednařík, A., Lepcio, P., Holec, D., Preisler, J. & Zajickkova, L., 1 Feb 2023, In: Applied surface science. 610.2023, 1 February, 9 p., 155536.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Dataset of fire tests with lithium-ion battery electric vehicles in road tunnels

    Sturm, P., Fößleitner, P., Fruhwirt, D., Heindl, S. F., Heger, O., Galler, R., Wenighofer, R. & Krausbar, S., Feb 2023, In: Data in Brief. 46.2023, February, 6 p., 108839.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures

    Seligmann, B., Alfreider, M., Wurmshuber, M. & Kiener, D., Feb 2023, In: Advanced engineering materials. 25.2023, 3, 10 p., 2201209.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Novel strategy to model deformation-induced strand contraction/dilatation during mechanical reduction

    Guan, R., Rodrigues, C. M. G., Ji, C., Zhu, M., Li, S., Wu, M., Kharicha, A., Vakhrushev, A. & Ludwig, A., Feb 2023, In: Applied Mathematical Modelling. 114.2023, February, p. 770-784 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Power System Hardware in the Loop (PSHIL) Netzintegrationstests – Netzstabilität und -flexibilisierung mittels Schwungradspeicher

    Gradwohl, C. & Kienberger, T., Feb 2023.

    Research output: Contribution to conference › Paper

  18. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures

    Zhang, Z.-Q., Fellner, S., Ketov, S. V., Cordill, M., Sheng, H., Mitterer, C., Song, K., Gammer, C. & Eckert, J., Feb 2023, In: Intermetallics. 153.2023, February, p. 1-11 11 p., 107797.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Study of the Hypergeometric Equation via Data Driven Koopman-EDMD Theory

    Melas, E., Poulios, C., Camouzis, E., Leventides, J. & Poulios, N., Feb 2023, In: Axioms. 12, 2, 11 p., 134.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    The Ball-on-Three-Balls strength test for discs and plates: Extending and simplifying stress evaluation

    Staudacher, M., Lube, T. & Supancic, P. H., Feb 2023, In: Journal of the European Ceramic Society. 43.2023, 2, p. 648-660 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The formation of the Unterlaussa karst bauxite (Austria) – A re-evaluation of the established model

    Hampl, F. J. & Melcher, F., Feb 2023, In: Journal of geochemical exploration. 2023, 245, 17 p., 107141.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    We 33 Fostering inclusive access to analytical instrumentation

    Irrgeher, J., Schober, M., Lancaster, S., Trimmel, S., Wagner, S. & Prohaska, T., Feb 2023, p. 301. 1 p.

    Research output: Contribution to conference › Abstract

  23. Published

    2D elemental mapping of micrometeorites via LA-ICP-ToF-MS

    Chernonozhkin, S., Van Acker, T., Van Malderen, S., Goderis, S. & Vanhaecke, F., 31 Jan 2023.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering

    Honaramooz, M., Morak, R., Pogatscher, S., Popovski, G., Kremmer, T., Meisel, T., Österreicher, J. A., Arnoldt, A. & Paris, O., 31 Jan 2023, In: Materials. 16.2023, 3, 13 p., 1213.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Development and validation of MC-ICP-MS based methods for Ni and Fe isotope analysis to study plant hyperaccumulation

    Epov, A. V., Chernonozhkin, S., Puschenreiter, M., Tognacchini, A., Meisel, T. C., Prohaska, T. & Irrgeher, J., 31 Jan 2023.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Diffusive gradients in thin films (DGT) combined with LA-ICP-MS for elemental mapping of localised Aluminium corrosion

    Mukhametzianova, G., Wagner, S., Moshtaghi, M., Eskinja, M., Mori, G. K. & Prohaska, T., 31 Jan 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Reversible solid oxide cell systems as key elements of achieving flexibility in future energy systems

    Banasiak, D., Kienberger, T. & Sejkora, C., 31 Jan 2023, High-Temperature Electrolysis: From fundamentals to applications. IOP Publishing Ltd., p. 19-1 bis 19-32 32 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  28. E-pub ahead of print

    Beitrag der universitären Ausbildung und Forschung zur Reduktion der Unfallzahlen im Bergbau

    Sifferlinger, N. A., Haider, K., Mädel, O. & Maier, A., 30 Jan 2023, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 2, p. 83-88 6 p.

    Research output: Contribution to journal › Article › Research

  29. Published

    Challenges in sample preparation of carbon-rich samples of biogenic, geogenic and technological origin

    Bandoniene, D., Dietrich, V. E., Mukhametzianova, G., Meisel, T. C. & Prohaska, T., 29 Jan 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Comparison of methods for characterising the steel cleanness in powder metallurgical high-speed steels

    Schickbichler, M., Ramesh Babu, S., Hafok, M., Turk, C., Schneeberger, G., Fölzer, A. & Michelic, S. K., 29 Jan 2023, In: Powder Metallurgy. 66.2023, 4, p. 316-332 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Bergbaukunde, quo vadis?

    Tost, M., Hartlieb, P., Heiss, C., Knoll, B., Ladinig, T., Mayer, G., Moser, P., Prenner, M., Sifferlinger, N. A. & Moser-Tscharf, A., 27 Jan 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 2, p. 37-44 8 p.

    Research output: Contribution to journal › Article › Transfer

  32. Published

    Monitoringsystem für Gurtbandförderer - Auswertungsmöglichkeiten

    Prenner, M. & Müller, J., 26 Jan 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 2, p. 56-61 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Status of the H2020-ROBOMINERS Prototype

    Berner, M. & Sifferlinger, N. A., 26 Jan 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 2, p. 45-55 11 p.

    Research output: Contribution to journal › Article › Research

  34. Published

    Corrigendum to “Personalised urethra pessaries prepared by material extrusion-based additive manufacturing” [Int. J. Pharm. 608 (2021) 121112] (International Journal of Pharmaceutics (2021) 608, (S0378517321009182), (10.1016/j.ijpharm.2021.121112))

    Spörk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Jan 2023, In: International Journal of Pharmaceutics. 631.2023, 25 January, 1 p., 122548.

    Research output: Contribution to journal › Comment/debate › peer-review

  35. Published

    Investigation of the microstructure of a graded ZrN/Ti0.33Al0.67N multilayer coating using cross-sectional characterization methods

    Frank, F., Tkadletz, M., Saringer, C., Czettl, C., Pohler, M., Burghammer, M., Todt, J., Zalesak, J., Keckes, J. & Schalk, N., 25 Jan 2023, In: Surface & coatings technology. 453.2023, 25 January, 8 p., 129126.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    The Role of Social Media in the Process of Informing the Public About Disaster Risks

    Cvetković, V. M. & Nikolić, A., 24 Jan 2023

    Research output: Other contribution › Research

  37. Published

    A Reinforcement Learning Approach for Real-Time Autonomous Decision-Making in Well Construction

    Keshavarz, S., Vita, P., Rückert, E., Ortner, R. & Thonhauser, G., 19 Jan 2023, SPE AI Symposium 2023: Leveraging Artificial Intelligence to Shape the Future of the Energy Industry. (Society of Petroleum Engineers - SPE Symposium: Leveraging Artificial Intelligence to Shape the Future of the Energy Industry, AIS 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Prediction of Friction Power via Machine Learning of Acoustic Emissions from a Ring-on-Disc Rotary Tribometer

    Strablegg, C., Summer, F., Renhart, P. & Grün, F., 19 Jan 2023, In: Lubricants. 11.2023, 2, 17 p., 37.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Superconductivity in medium- and high-entropy alloy thin films: Impact of thickness and external pressure

    Pristas, G., Backai, J., Orendac, M., Gabani, S., Kosuth, F., Kuzmiak, M., Szabo, P., Gazo, E., Franz, R., Hirn, S., Gruber, G., Mitterer, C., Vorobiov, S. & Flachbart, K., 17 Jan 2023, In: Physical review : B, Condensed matter and materials physics. 107.2023, 2, 9 p., 024505.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Drying of Hierarchically Organized Porous Silica Monoliths–Comparison of Evaporative and Supercritical Drying

    Kohns, R., Torres-Rodríguez, J., Euchler, D., Seyffertitz, M., Paris, O., Reichenauer, G., Enke, D. & Huesing, N., 16 Jan 2023, In: Gels : open access physical and chemical gels journal. 9.2023, 1, 71.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    The Dump is the Target—A Reversed Mine Plan

    Haindl, A., 16 Jan 2023, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 2, p. 71-74 4 p.

    Research output: Contribution to journal › Article › Research

  42. Published

    Deliberate control of the structure-specific active sites in PdIn bimetallic catalysts using adsorbate induced segregation effects

    Bukhtiyarov, A. V., Panafidin, M. A., Prosvirin, I. P., Smirnova, N. S., Markov, P. V., Baeva, G. N., Mashkovsky, I. S., Bragina, G. O., Rameshan, C., Gerasimov, E. Y., Zubavichus, Y. V., Bukhtiyarov, V. I. & Stakheev, A. Y., 15 Jan 2023, In: Applied surface science. 608.2023, 15 January, 13 p., 155086.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Forced imbibition and uncertainty modeling using the morphological method

    Arnold, P., Dragovits, M., Linden, S., Hinz, C. & Ott, H., 15 Jan 2023, (E-pub ahead of print) In: Advances in Water Resources. 172.2023, February, 11 p., 104381.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Porosity, strength, and alteration – Towards a new volcano stability assessment tool using VNIR-SWIR reflectance spectroscopy

    Kereszturi, G., Heap, M. J., Schaefer, L. N., Darmawan, H., Deegan, F. M., Kennedy, B., Komorowski, J. C., Mead, S., Rosas-Carbajal, M., Ryan, A., Troll, V. R., Villeneuve, M. & Walter, T. R., 15 Jan 2023, In: Earth and planetary science letters. 602.2023, 12 p., 117929.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Anode materials for solid oxide electrolysis cells

    Berger, C. & Egger, A., 13 Jan 2023, High-Temperature Electrolysis: From fundamentals to applications. 1 ed. Bristol, UK: IOP Publishing Ltd., p. 3.1-3.35 35 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Solid State Material Driven Turbine to Reduce Segregation during Bunker Filling

    Denzel, M., Prenner, M. & Sifferlinger, N. A., 13 Jan 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 2, p. 62-70 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Detecting Anomalous Multivariate Time-Series via Hybrid Machine Learning

    Terbuch, A., O'Leary, P., Khalilimotlaghkasmaei, N., Auer, P., Zöhrer, A. & Winter, V., 12 Jan 2023, In: IEEE transactions on instrumentation and measurement. 72.2023, 13 p., 2503711.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Lithium pegmatite of anatectic origin – A case study from the Austroalpine Unit Pegmatite Province (Eastern European Alps): Geological data and geochemical modeling

    Knoll, T., Huet, B., Schuster, R., Mali, H., Ntaflos, T. & Hauzenberger, C., 12 Jan 2023, (E-pub ahead of print) In: Ore geology reviews. 154.2023, March, 32 p., 105298.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Aus Abgas wird Rohstoff: Carbon Capture and Utilization

    Rameshan, C., 11 Jan 2023

    Research output: Non-textual form › Web publication/site › Transfer

  50. Published

    Determination of 48 elements in 7 plant CRMs by ICP-MS/MS with a focus on technology-critical elements

    Trimmel, S., Meisel, T., Lancaster, S., Prohaska, T. & Irrgeher, J., 10 Jan 2023, In: Analytical and bioanalytical chemistry. 415.2023, 10. January, p. 1159-1172 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    State of Public Health at the Local Level in Serbia: Longitudinal Research

    Cvetković, V. M., Tanasić, J., Živković-Šulović, M., Ćurić, N. & Milojević, S., 10 Jan 2023

    Research output: Other contribution › Research

  52. Published

    Micro-mechanisms of failure in nano-structured maraging steels characterised through in situ mechanical tests

    Jacob, K., Sahasrabuddhe, H., Hohenwarter, A., Dixit, S. & Jaya, B. N., 8 Jan 2023, In: Nanotechnology. 34.2023, 2, 025703.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Data-mining of in-situ TEM experiments: Towards understanding nanoscale fracture

    Steinberger, D., Issa, I., Strobl, R., Imrich, P. J., Kiener, D. & Sandfeld, S., 5 Jan 2023, In: Computational materials science. 216.2023, 5 January, 9 p., 111830.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Structural evolution after oxidative pretreatment and CO oxidation of Au nanoclusters with different ligand shell composition: a view on the Au core

    Truttmann, V., Schrenk, F., Marini, C., Palma, M., Sanchez-Sanchez, M., Rameshan, C., Agostini, G. & Barrabés, N., 5 Jan 2023, In: Physical Chemistry Chemical Physics. 25.2023, 5, p. 3622-3628 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Suprasubduction ophiolite (SSZ) components in a middle to lower upper Jurassic Hallstatt Mélange in the Northern Calcareous Alps (Raucherschober/Schafkogel area)

    Drvoderic, S., Gawlick, H.-J., Suzuki, H. & Schlagintweit, F., 5 Jan 2023, In: Geosystems and Geoenvironment. 2.2023, 3, 21 p., 100174.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Direct Formation of Hard-Magnetic Tetrataenite in Bulk Alloy Castings

    Ivanov, Y. P., Sarac, B., Ketov, S. V., Eckert, J. & Greer, A. L., 4 Jan 2023, In: Advanced science. 10.2023, 1, 8 p., 2204315.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    The Key Role of Laser Ultrasonics in the Context of Sustainable Production in an I 4.0 Value Chain

    Hartl, K., Sorger, M. & Stockinger, M., 4 Jan 2023, In: Applied Sciences : open access journal. 13.2023, 2, 22 p., 733.

    Research output: Contribution to journal › Review article › peer-review

  58. Published

    A pyrrole–carbazole photoinitiator for radical and cationic visible light LED photopolymerization

    Li, Y., Shaukat, U., Schlögl, S., Xue, T., Li, J., Nie, J. & Zhu, X., 3 Jan 2023, In: European polymer journal. 182.2023, 3 January, 7 p., 111700.

    Research output: Contribution to journal › Article › Research › peer-review

  59. E-pub ahead of print

    Evaluating 87Sr/86Sr and Sr/Ca ratios in otoliths of different European freshwater fish species as fishery management tool in an Alpine foreland with limited geological variability.

    Zitek, A., Oehm, J., Schober, M., Tchaikovsky, A., Irrgeher, J., Retzmann, A., Thalinger, B., Traugott, M. & Prohaska, T., 3 Jan 2023, (E-pub ahead of print) In: Fisheries research. 260.2023, April, 17 p., 106586.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Digital twin for directional solidification of a single-crystal turbine blade

    Zhang, H., Liu, X., Ma, D., Song, M., Ludwig, A., Kharicha, A. & Wu, M., 1 Jan 2023, In: Acta Materialia. 244.2023, 1 January, 15 p., 118579.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au system

    Scheiber, D., Svoboda, J., Fischer, F.-D., Böhm, H. J. & Romaner, L., 1 Jan 2023, In: Acta materialia. 244.2023, 1 January, 11 p., 118577.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Modeling of Fatigue Crack Growth: Dislocation Models

    Pippan, R. & Hohenwarter, A., 1 Jan 2023, Comprehensive Structural Integrity. Elsevier, p. V4-56-V4-70

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  63. Published

    Potential eutectic accumulation in single crystal turbine blade due to geometry effect: a numerical study

    Zhang, H. J., Liu, X. S., Ma, D. X., Ludwig, A., Kharicha, A. & Wu, M. H., 1 Jan 2023, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Temperature dependence of solute segregation energies at W GBs from first principles

    Scheiber, D., Popov, M. N. & Romaner, L., 1 Jan 2023, In: Scripta materialia. 222.2023, 1 January, 5 p., 115059.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Zinc

    Antrekowitsch, J., Steinlechner, S., Hanke, G. & Brandner, U., 1 Jan 2023, Handbook of Recycling: State-of-the-art for Practitioners, Analysts, and Scientists. Elsevier, p. 371-383 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  66. Published

    Comparative Investigation of the Undercooling Capacity and Single-Crystal Castability of Some Ni-Based Superalloys

    Ma, D., Zhao, Y., Xu, W., Xu, F., Wei, J. & Zhang, H., Jan 2023, In: Crystals. 13.2023, 1, 11 p., 57.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Effect of local microstructure on fatigue and related failure mechanisms in AlSi-castings

    Oberreiter, M., Stoschka, M., Horvath, M. & Fladischer, S., Jan 2023.

    Research output: Contribution to conference › Paper › peer-review

  68. Published

    Evolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formats

    Jakob, S., Lorich, A., Knabl, W., Stark, A., Staron, P., Clemens, H. & Spörk-Erdely, P., Jan 2023, In: International journal of refractory metals & hard materials. 110.2023, January, 7 p., 106032.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Influence of Co-enriched surface zones in cemented carbides on the microstructure and mechanical properties of TiN/TiC0.6N0.4/ α-Al2O3 coatings

    Konstantiniuk, F., Krobath, M., Ecker, W., Tkadletz, M., Czettl, C. & Schalk, N., Jan 2023, In: International journal of refractory metals & hard materials. 110.2023, January, 8 p., 106025.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Influence of Hot Band Annealing on Cold-Rolled Microstructure and Recrystallization in AA 6016

    Cantergiani, E., Weißensteiner, I., Grasserbauer, J., Falkinger, G., Pogatscher, S. & Roters, F., Jan 2023, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 54.2023, 1, p. 75-96 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Influence of Processing Route on the Fracture Resistance of Equal Channel Angular Pressing Deformed Iron

    Hohenwarter, A. & Pippan, R., Jan 2023, In: Advanced engineering materials. 25.2023, 1, 9 p., 2201011.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Material extrusion-based additive manufacturing of polyetheretherketone cranial implants: Mechanical performance and print quality

    Petersmann, S., Smith, J. A., Schäfer, U. & Arbeiter, F., Jan 2023, In: Journal of Materials Research and Technology. 22.2023, January-February, p. 642-657 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Mechanisms of hydrogen absorption, trapping and release during galvanostatic anodization of high-strength aluminum alloys

    Safyari, M., Mori, G. K., Ucsnik, S. & Moshtaghi, M., Jan 2023, In: Journal of Materials Research and Technology. 22.2023, January-February, p. 80-88 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Organic geochemistry and petrography of Miocene ombrotrophic coals in the tropical Asem-Asem Basin (Kalimantan, Indonesia): Comparison to coeval subtropical coals in the Eastern Alps

    Fikri, H. N., Sachsenhofer, R., Bechtel, A. & Groß, D., Jan 2023, In: Austrian journal of earth sciences. 116.2023, 1, p. 85-107 23 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Research Progress on Low-Pressure Powder Injection Molding

    Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.

    Research output: Contribution to journal › Review article › peer-review

  76. Published

    Simultaneous interpretation of SCAL data with different degrees of freedom and uncertainty analysis

    Amrollahinasab Mahdiabad, O., Azizmohammadi, S. & Ott, H., Jan 2023, In: Computers and geotechnics. 153.2022, January, 11 p., 105074.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Total Knee Arthroplasty Violates the Law of Burmester—A Biomechanical Investigation

    Maderbacher, G., Keshmiri, A., Springorum, H. R., Mösenbacher, A., Grifka, J. & Baier, C., Jan 2023, In: Journal of Personalized Medicine. 13.2023, 1, 9 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Wavelength Selective Multi-Material 3D Printing of Soft Active Devices Using Orthogonal Photoreactions

    Rossegger, E., Strasser, J., Höller, R., Fleisch, M., Berer, M. & Schlögl, S., Jan 2023, In: Macromolecular rapid communications. 44.2023, 2, 9 p., 2200586.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    2D elemental mapping of micrometeorites via LA-ICP-tof-MS

    Chernonozhkin, S., Van Acker, T., Van Malderen, S., Goderis, S. & Vanhaecke, F., 2023.

    Research output: Contribution to conference › Abstract

  80. Published

    3D Printed Device for Avoiding Hand Contact with Shared Surfaces: The Handgenic

    Pais, A. I., Ferreira, C., Pires, V., Silva, V., Alves, J. L., Bastos, J. A. & Belinha, J., 2023, Proceedings of the 10th Congress of the Portuguese Society of Biomechanics, CNB 2023. Martins Amaro, A., Roseiro, L., Messias, A. L., Gomes, B., Almeida, H., António Castro, M., António Castro, M., Neto, M. A., de Fátima Paulino, M. & Maranha, V. (eds.). p. 3-15 13 p. (Lecture Notes in Bioengineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Abbrand- und Wirtschaftsanalyse über die Aufarbeitung von Spänen und die Implementierung einer Brikettieranlage am Beispiel Advanced Bearing Materials LLC am Standort Greensburg Indiana USA

    Alp, O., 2023

    Research output: Thesis › Master's Thesis

  82. Published

    Ab initio discovery of novel hydride phases in NiTi shape memory alloys

    Paulik, A., 2023

    Research output: Thesis › Master's Thesis

  83. Published

    Abkühlung von Stahl mit erhöhten Spurenelementgehalten unter Wasserdampf und Untersuchung der Auswirkung auf die Rissbildung im IMC-Biegeversuch

    Lex, C., 2023

    Research output: Thesis › Master's Thesis

  84. Published

    About responsibility in production and consumption

    Kollnig, S., 2023, Global Challenges for a Sustainable Society. The European University for Responsible Consumption and Production.. Springer, (Springer Proceedings in Earth and Environmental Sciences).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  85. Published

    A Breakage Model for Discrete Element Simulations Applied to Iron Ore Sinter

    Denzel, M., 2023

    Research output: Thesis › Doctoral Thesis

  86. Published

    A brief guide to conducting failure analysis on ceramic components

    Harrer, W., Morrell, R. & Danzer, R., 2023, In: Practical metallography = Praktische Metallographie. 60, p. 580-593

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Absenken des SiO2 - Gehaltes und Agglomerationsversuche für das Erz des Steirischen Erzberges

    Scherer, F., 2023

    Research output: Thesis › Master's Thesis

  88. Published

    Accuracy of 2D finite difference seismic full-waveform modeling in the presence of a free surface

    Krause, T., 2023

    Research output: Thesis › Master's Thesis

  89. Published

    A Comparison of Microstructure and Casting Defects of Rheocasting and Thixocasting Al-Si-Mg Alloy

    Li, J., Spacil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Trans Tech Publications, p. 61-66 6 p. (Solid State Phenomena; vol. 347).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  90. Published

    A comparison of microstructure and casting defects of rheocasting and thixocasting Al-Si-Mg alloys

    LI, J., Spáčil, I., Winklhofer, J., Hofstätter, F. & Griesebner, S., 2023, Solid State Phenomena. Vol. 347. p. 61-66 (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  91. Published

    A comprehensive study on the metallographic preparation of W-Re samples for high resolution electron-based microscopy

    Sommerauer, M., Clemens, H., Maier-Kiener, V. & Siller, M., 2023, Pract. Metallograp.. Vol. 60. p. 171-186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Additive Fertigung - Designkriterien und Anwendungen

    Grun, F. & Tittler, M., 2023, Kfz-Symposium 2023: Neue Technologien und Innovationen in der Fahrzeugtechnik XVIII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Additive Manufacturing of Fe-Si Soft Magnets

    Strauss, R., 2023

    Research output: Thesis › Master's Thesis

  94. Published

    Advanced Modeling and Analysis of Electrical Grids for Multi-Energy System Approaches

    Traupmann, A., 2023

    Research output: Thesis › Doctoral Thesis

  95. Published

    Advancing Industry 4.0: AI-Enhanced In-Line MIMO Quality Control for Piano-Black Curved Plastic Injection Molded Parts with OPC UA Integration

    Saeidi Aminabadi, S., 2023

    Research output: Thesis › Doctoral Thesis

  96. Published

    Advancing Mechanical Property Characterisation for Metallic Foils using Experiments, Simulations, and Machine Learning

    Trost, C. O. W., 2023

    Research output: Thesis › Doctoral Thesis

  97. Published

    Alternative Spark Plug Electrode Materials for Economical, Reliable Engine Operation

    Tilz, A., Gruber, M., Harrer, W., Engelmayer, M., Fimml, W. & Wimmer, A., 2023, Proceedings of the ASME 2023 ICE Forward Conference, ICEF 2023. American Society of Mechanical Engineers(ASME)

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    AMAG CrossAlloys® CrossAlloy™.68 – Ausgezeichnete mechanische Eigenschaften bei hohem Fe-Gehalt

    Trink, B., 2023, In: AluReport. 2023, 1, p. 28-31 4 p.

    Research output: Contribution to journal › Article › Research

  99. Published

    A method to reduce computation time in finite element simulations of deep rolling

    Bialowas, J., Pletz, M., Gapp, S. & Maierhofer, J., 2023, In: Procedia Structural Integrity. 46, p. 49-55 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  100. Published

    A Multi-method Atomistic Study of Protective Nitride Coatings: from Crystalline to Amorphous Materials

    Nayak, G. K., 2023

    Research output: Thesis › Doctoral Thesis

  101. Published

    Analyse des kinematischen Verfestigungsverhalten eines Rohrwerkstoffes unter niedriger zyklischer Zug-Druck-Belastung

    Seidl, A., 2023

    Research output: Thesis › Master's Thesis

Previous 1...19 20 21 22 23 24 25 26 ...339 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402