Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

3201 - 3300 out of 4,192Page size: 100

Research output

  1. 2010
  2. Published

    Validation of an accelerated fracture mechanics extrapolation tool for lifetime prediction of PE pressure pipes

    Frank, A., Hartl, A. M., Pinter, G. & Lang, R. W., 2010, proceedings of Annual Technical Conference of the Society of Plastics Engineers (ANTEC) 2010. p. 1638-1643

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Verarbeitung von Nanofüllstoffen mittels "Advanced Compounding"

    Mattausch, H., Laske, S. & Holzer, C., 2010, Proceedings - Grenzen von Kunststoffen neu definiert - Errungenschaften im Bereich Metallersatz und Leichtbau. p. 1-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Verbundhaftungsuntersuchungen an Mehrkomponentenspritzgussteilen

    Grieshofer, H., 2010

    Research output: Thesis › Master's Thesis

  5. Published

    Verfahrenstechnische Auslegung der Ausstoßzone eines konischen gleichlaufenden Doppelschneckenextruders

    Himmler, G., 2010

    Research output: Thesis › Master's Thesis

  6. Published

    Vergleichende Ökobilanzierung von polymerem und herkömmlichem Kopierpapier

    Katschnig, M., 2010

    Research output: Thesis › Master's Thesis

  7. Published

    Verwendung einer FT-NIR Anlage an einem Doppelschneckenextruder: Aufbau, Inbetriebnahme sowie Grundlagen der chemometrischen Modellierung

    Witschnigg, A., 2010

    Research output: Book/Report › Book › Research

  8. Published

    Virtual determination of a process window for injection moulding

    Lucyshyn, T., Kukla, C., Kipperer, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Virtual Process Design in Expansion Injection Molding

    Rajganesh Jegadeesan, X., Friesenbichler, W. & Steinbichler, G., 2010, In: Kunststoffe <München> / Kunststoffe international. 100, p. 148-152

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Virtuelle Prozessauslegung beim Expansionsspritzgießen

    Rajganesh Jegadeesan, X., Friesenbichler, W. & Steinbichler, G., 2010, In: Kunststoffe. p. 204-208

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Waveguide structures in polymers by two photon patterning

    Woods, R., Langer, G., Feldbacher, S., Satzinger, V. & Kern, W., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Werkstoffcharakterisierung von Kunststoffgeweben mittels Dynamischer Differenzkalorimetrie

    Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Wood Plastic Composites: determination and comparison of the specific energy consumption for WPC compounding methods based on two state-of-the-art formulations

    Kahr, S., 2010, 84 p.

    Research output: Thesis › Master's Thesis

  14. Published

    X-ray diffraction of Pentacene on organic dielectrics

    Moser, A., Flesch, H.-G., Neuhold, A., Edler, M., Grießer, T., Marchl, M., Trimmel, G., Golubkov, A., Haase, A., Smilgies, D.-M., Zojer, E. & Resel, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Zugfestigkeit an Rohrverbindungen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Zugversuche an 4 Folienwerkstoffen

    Guttmann, P. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Zugversuche an verklebten Aluminiumblechen

    Pilz, G. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. 2009
  19. Published

    Verfahren zur Herstellung eines vernetzten Polymers (method for the production of crosslinked elastomers)

    Schloegl, S. (Inventor), Kern, W. (Inventor), Schaller, R. (Inventor) & Holzner, A. (Inventor), 1 Mar 2009, Patent No. A421 / 2009

    Research output: Patent

  20. Published

    Abrasive wear measurements of various polyamide compounds under real-injection molding conditions

    Oláh, L. & Friesenbichler, W., 2009,

    PPS 2009 Programme & Abstracts

    .     p. 56-56

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, EuroNanoForum 2009 - Nanotechnology for Sustainable Economy - Proceedings. p. 222-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Advanced Characterization of the Tensile and Compressive Behavior of PP and PP Composites

    Jerabek, M. J., 2009

    Research output: Thesis › Doctoral Thesis

  24. Published

    Advanced compounding: extrusion of polypropylene nanocomposites using the melt pump

    Kracalik, M., Laske, S., Gschweitl, M., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 113, p. 1422-1428

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Advanced Compounding of Polymer Nanocomposites by assembling a melt pump

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Advanced Compounding of Polymer Nanocomposites using a Melt Pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 148-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades

    Frank, A., Freimann, W., Pinter, G. & Lang, R., 2009, In: Engineering Fracture Mechanics. 76, p. 2780-2787

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Ageing characterization of commercial ethylene copolymer greenhouse films by analytical and mechanical methods

    Oreski, G., Wallner, G. & Lang, R., 2009, In: Biosystems engineering. 103, p. 489-496

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Aging Behavior of Polymeric Absorber Materials for Solar Thermal Collectors

    Kahlen, S., 2009

    Research output: Thesis › Doctoral Thesis

  30. Published

    Aging of polymers in solar-thermal applications, Final Report

    Wallner, G., Kahlen, S. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Aging of polymers in solar-thermal applications, WP Report Alterung, Analyse und Charakterisierung von Bauteilen

    Wallner, G., Kahlen, S. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Aging of polymers in solar-thermal applications, WP Report Alterung, Analyse und Charakterisierung von Halbzeugen

    Wallner, G., Kahlen, S. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Aging of polymers in solar-thermal applications, WP Report Herstellung von Compounds, Halbzeugen und Bauteilen

    Wallner, G., Kahlen, S. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Amphiphilic block copolymers containing thermally degradable poly(phthalaldehyde) blocks

    Köstler, S., Zechner, B., Trathnigg, B., Fasl, H., Kern, W. & Ribitsch, V., 2009, In: Journal of polymer science : A, Polymer chemistry. 47, p. 1499-1509

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Assessment of Material Properties during compounding of Polymer Nanocomposites using In-Line near Infrared Spectroscopy

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 150-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    A study on the formation and thermal stability of 11-MUA SAMs on Au(111)/mica and on polycrystalline gold foils.

    Grießer, T., 2009, In: Langmuir. 25, p. 1427-1433

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Aufbau und Inbetriebnahme einer FT-NIR Anlage an einem gleichlaufenden Doppelschneckenextruder

    Witschnigg, A., 2009

    Research output: Thesis › Diploma Thesis

  38. Published

    Automatisierbare Mess- und Auswertemethoden zur Charakterisierung der Topographie bandbeschichteter Bleche

    Kicker, H., 2009

    Research output: Thesis › Master's Thesis

  39. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W. & Windhager, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W., Windhager, W. & Meister, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  41. Published

    Basischarakterisierung und Alterungsverhalten von Polymerwerkstoffen für die Einkapselung von Photovoltaik-Modulen

    Mattausch, H., 2009

    Research output: Thesis › Master's Thesis

  42. Published

    Berechnung von Extrusionsschnecken

    Schuschnigg, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Biopolymer Paper for Laser Printing Applications

    Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P., Burkhalter, R. & Langecker, G., 2009, PPS-25 Program & Abstracts. p. 78-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Biopolymer Paper for Laser Printing Applications: 25th Annual Meeting of the Polymer Processing Society

    Langecker, G., Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P. & Burkhalter, R., 2009

    Research output: Non-textual form › Web publication/site › Research

  45. Published

    Braided Fabrics: Development and evaluation of adequate test methodologies for generating design allowables

    Wolfahrt, M., Pinter, G., Zaremba, S., Ladstätter, E. & Reden, von, T., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Calculation of Residual Stresses in the Insert Molding Process Using the Finite Element Method

    Kisslinger, T., Fischer, K., Lucyshyn, T. & Langecker, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  47. Published

    Characterization and simulation of the micromechanical behaviour of particulate filled polypropylene compounds under creep loading

    Gastl, S., Jerabek, M., Major, Z. & Lang, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Characterization of 11-MUA SAM formation on gold surfaces

    Grießer, T., 2009, Springer proceedings in physics. p. 101-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Characterization of the dynamic mechanical behavior of Polydimethylsiloxane based magneto elastomer

    Schrittesser, B., Major, Z. & Filipcsei, G., 2009, In: Journal of physics / Conference series. p. 1088-1092

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Characterization of the strain distribution around crack tips in unfilled and nanofilled polypropylene using in situ synchrotron small and wide angle scanning scattering techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, EPF'09 european polymer congress. p. 120-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Charakterisierung der Schadenstoleranz und der monotonen und zyklischen interlaminaren Risszähigkeit von Polymer-Laminaten

    Stelzer, S., 2009

    Research output: Thesis › Master's Thesis

  52. Published

    Charakterisierung von Epoxidharzformulierungen für Verbundwerkstoffe - Einfluss von Aushärtegrad und Aushärteweg

    Wolfahrt, M., 2009

    Research output: Thesis › Doctoral Thesis

  53. Published

    Charakterisierung von Spröd/Zäh-Übergängen in PP-Compounds mittels instrumentierter Schlagbiege- und Durchstoßversuche

    Huber, D., 2009

    Research output: Thesis › Master's Thesis

  54. Published

    Close-Fit-Liner – Verfahrens bedingte Beeinflussung der Werkstoffeigenschaften und des Rohrlangzeitverhaltens

    Frank, A., Hofmann, A., Haager, M. & Pinter, G., 2009, In: 3 R international. 48, p. 2-8

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Close-Fit Relining - Verfahrensbedingte Beeinflussung der Werkstoffeigenschaften und des Rohrlangzeitverhaltens

    Frank, A., Haager, M., Hofmann, A., Pinter, G. & Lang, R., 2009, ÖGL Symposium Grabenlos. p. 54-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Compoundieren

    Witschnigg, A., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    Computational and experimental simulation of delamination in L-shaped laminated composite components

    Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2009, In: Engineering Fracture Mechanics. 76, p. 2810-2820

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Conception, calculation and analysis of a crosshead with double-coathanger distributor for physically foamed polyethylenes

    Richling, M. W., 2009

    Research output: Thesis › Master's Thesis

  59. Published

    Conductive Atomic Force Microscopy investigations of organic thin films

    Pavitschitz, A., Beinik, I., Kratzer, M., Teichert, C., Schwabegger, G., Sitter, H., Simbrunner, C., Grießer, T. & Kern, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Correlation between production parameters and application properties of high impact copolymers

    Aust, N. & Kock, C., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Crack growth in polyethylene (PE-HD) - from macroscopic failure to molecular failure mechanisms

    Lang, R., Pinter, G., Frank, A. & Haager, M., 2009, EPF'09 European polymer congress. p. 121-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Demolding Forces and Coefficients of Friction in Injection Molding. A new Mold and first results

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2009, In: Purasuchikkusu-eji = Plastics age. 55, p. 87-94

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Demolding forces and coefficients of friction in injection molding. A new practical measurement apparatus

    Berger, G. & Friesenbichler, W., 2009, Proceedings of ANTEC 2009. p. 1699-1703

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, 2008 MRS Fall Meeting Symposium. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Determination of material parameters for hyperelastic material models for two elastomer grades

    Major, Z. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, Final Report

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Analyse von Lackkomponenten, Lackfilmen und bandbeschichteten Blechen

    Wallner, G., Fischer, J., Buder-Stroisznigg, M. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Charakterisierung von Lackfilmen und bandbeschichteten Blechen

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lacken

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lackfilmen und beschichteten Blechen

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Development of a standardized procedure for the characterization of interlaminar crack growth in advanced composites under fatigue mode i loading conditions

    Brunner, A. J., Murphy, N. & Pinter, G., 2009, In: Engineering Fracture Mechanics. 76, p. 2678-2689

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Diverse Messungen an Polypropylen-Talk Compounds

    Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    Druckprüfung nach ASTM D3410 an Composite Proben

    Pinter, G. & Payer, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Dynamisch-Mechanische Analyse (DMA) an PMMA-Folien

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Dynamisch-Mechanische Analyse (DMA) von Folienwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Dynamisch-Mechanische Analyse (DMA) von Thermoplastwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Dynamisch mechanische Analyse von Epoxidharzen

    Guttmann, P., 2009

    Research output: Thesis › Master's Thesis

  78. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, Final Report

    Wallner, G., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Bauteilen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Rohstoffen und Halbzeugen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Herstellung von Rohstoffen, Halbzeugen und Bauteilen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Effect of polymer matrix on quasi-static and fatigue filled hole tension and compression tests in liquid moulding non-crimp fabric composites

    Pinter, G., Wolfahrt, M. & Kuntz, J., 2009, Sampe Europe 30 th Intern. Jubilee Conference and Forum. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Effect of preform architecture on the mechanical and fatigue behavior of braided compositess for generating design allowables

    Wolfahrt, M., Pinter, G., Zaremba, S., Reden, von, T. & Ebel, C., 2009, Sampe Europe 30 th Intern. Jubilee Conference and Forum. p. 271-276

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Einfluss der spezifischen Wärmekapazität auf die Verzugsberechnung in Moldflow Plastics Insight (MPI) und experimentelle Validierung

    Schlattinger, P., 2009

    Research output: Thesis › Master's Thesis

  85. Published

    Einsatz von Talkum und Zeolith in Kunststoff-Compounds

    Piontek, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Entformungskräfte beim Spritzgießen in Abhängigkeit von Oberflächenrauigkeit, Stahlwerkstoff, Vorzugsrichtung der Oberflächenstruktur, Beschichtung und Kunststofftyp

    Burgsteiner, M., 2009, 237 p.

    Research output: Thesis › Master's Thesis

  87. Published

    Entwicklung von Reaktivverdünnern auf Basis von Aminen und Acrylaten

    Muhr, N., 2009

    Research output: Thesis › Master's Thesis

  88. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 111, p. 2253-2259

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: VLK-News. 17. Jahrg., p. 6-8

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Evaluation of the aging behavior of ethylene copolymer films for solar applications under accelerated weathering conditions

    Oreski, G. & Wallner, G., 2009, In: Solar energy. 83, p. 1040-1047

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    EXINMOLD

    Lucyshyn, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Expansion injection moulding

    Rajganesh Jegadeesan, X., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  93. Published

    Expansionsspritzgießverfahren

    Rajganesh Jegadeesan, X., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Fatigue Behaviour of Filled Polypropylene

    Grinschgl, M., 2009, 92 p.

    Research output: Thesis › Master's Thesis

  95. Published

    Fatigue propagation test development for polymer-matrix fibre-reinforced laminates

    Brunner, A., Paris, I. & Pinter, G., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension

    Jerabek, M., Major, Z. & Lang, R., 2009, Euro Fillers 2009. p. 18-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Flachfolien Coextrusion

    Piontek, M., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  98. Published

    Flexible clear coats - Effect of curing conditions

    Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2009, In: Progress in organic coatings. 65, p. 44-48

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    From micro to advanced compounding: the way for applications of polymer nanocomposites

    Kracalik, M., Laske, S. & Holzer, C., 2009, Conference Proceedings NanoCon 2009 1st Conference with international participation. p. 38-38

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    FT-NIR as a determination method for reinforcement of polymer nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 114, p. 2488-2496

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Heizzeitverkürzung für den Elastomerspritzguss mittels eines Heiz-Scher-Mischteiles

    Perko, L., 2009

    Research output: Thesis › Master's Thesis

  102. Published

    Hierarchy of adhesion forces in patterns of photoreactive surface layers

    Hlawacek, G., Shen, Q., Teichert, C., Lex, A., Trimmel, G. & Kern, W., 2009, In: Journal of chemical physics (The journal of chemical physics). 130, p. 44703-1-44703-5

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...29 30 31 32 33 34 35 36 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301