Department Mineral Resources Engineering

Organisational unit: Departments and Institutes

1101 - 1200 out of 3,520Page size: 100

Research output

  1. 2018
  2. Published

    Overview of current research work at the Chair of Subsurface Engineering at Montanuniversitaet Leoben

    Galler, R., Wenighofer, R., Gehwolf, P., Stoxreiter, T., Schuller, E., Pittino, G. & Darmaev, E., 1 Jun 2018, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 11.2018, 3, p. 265-275 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A review of the development of better prediction equations for blast fragmentation

    Ouchterlony, F. & Sanchidrián, J. A., Jun 2018, Rock Dynamics – Experiments, Theories and Applications: Proceedings of the 3rd International Conference on Rock Dynamics and Applications (RocDyn-3). Li, C. C., Li, X. & Zhang, Z.-X. (eds.). Boca Raton, p. 25-45 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Effect on comminution properties of blast preconditioned magnetic mortar

    Mansouri, H., Ouchterlony, F., Inanloo, H. & Böhm, A., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 407-414 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Filming blast fragmentation of rock and mortar cylinders

    Kukolj, I., Iravani, A., Ouchterlony, F., Weiß, C. & Lubensky, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 483-494 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Modelling blast fragmentation of cylinders of mortar and rock

    Iravani, A., Kukolj, I., Ouchterlony, F., Antretter, T. & Åström, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 597-610 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    The fragmentation-energy fan concept applied to blasting and drop weight comminution of rock

    Ouchterlony, F. & Sanchidrián, J. A., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 689-701 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Sink–float density separation of post-consumer plastics for feedstock recycling

    Bauer, M., Lehner, M., Schwabl, D., Flachberger, H., Kranzinger, L., Pomberger, R. & Hofer, W., 24 May 2018, In: Journal of Material Cycles and Waste Management. 20.2018, July, p. 1781–1791 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    SOLID STATE MATERIAL DRIVEN TURBINE

    Prenner, M. (Inventor), 23 May 2018, IPC No. F03G3/02, F03G3/04, Patent No. EP2788622 (B1)

    Research output: Patent

  10. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 303.2018, 7, 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Bidirectionally Coupled DEM–CFD Simulation: Reducing Dust Emission in Conveyor Technology

    Grübler, C. & Prenner, M., 10 May 2018

    Research output: Non-textual form › Web publication/site › Research

  12. Published

    ВЫСОКОТОЧНАЯ СЕНСОРНАЯ ТЕХНИКА ДЛЯ УСТАНОВЛЕНИЯ МЕХАНИЧЕСКОЙ НАГРУЗКИ ВЫЕМОЧНОГО ИНСТРУМЕНТА БУРОВОЙ ТОННЕЛЕПРОХОДЧЕСКОЙ МАШИНЫ

    Барварт, Ш. (Inventor) & Galler, R. (Inventor), 8 May 2018, IPC No. E21D 9/ 00 A I, Patent No. RU2016140704, Priority date 2 Apr 2015, Priority No. WO2015EP57361

    Research output: Patent

  13. Published

    Output-oriented analysis of the wet mechanical processing of polyolefin-rich waste for feedstock recycling

    Kranzinger, L. J., Pomberger, R., Schwabl, D., Flachberger, H., Bauer, M., Lehner, M. & Hofer, W., May 2018, In: Waste management & research. p. 445 - 453

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Rock mechanics implications of microwave treatment of rock as part of a hybrid system for mechanical excavation of rock for civil and mining applications

    Hartlieb, P. & Rostami, J., May 2018, Geomechanics and Geodynamics of Rock Masses: Proceedings of EUROCK 2018. Vol. 2. p. 1017–1023 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    UAV-Anwendungen im Bergbau - Modellversuche als Beitrag zur photogrammetrischen Forschung und Entwicklung

    Tscharf, A., Schenk, F., Mayer, G., Fraundorfer, F. & Bischof, H., May 2018, Schriftenreihe des Instituts für Markscheidewesen und Geodäsie an der TU Bergakademie Freiberg. Freiberg, Vol. 2018-1. p. 30-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. E-pub ahead of print

    Long-term behaviour of complex underground structures in evaporitic rock mass - Experiences gained from calculations and geotechnical observations

    Gschwandtner, G. & Galler, R., 27 Apr 2018, (E-pub ahead of print) In: Tunnelling and Underground Space Technology. 78.2018, August, p. 159-167 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Modified DHTT Equipment for Crystallization Studies of Mold Slags

    Kölbl, N., Harmuth, H. & Marschall, I., 9 Apr 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2018, 49/4, p. 1898-1909 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Comparison of wet-mechanic density separators for post-consumer plastics

    Schwabl, D., Bauer, M., Flachberger, H., Pomberger, R., Lehner, M., Kranzinger, L. J. & Hofer, W., 4 Apr 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    UAVs zur Qualitätssteuerung im Tagbau

    Tscharf, A., Mayer, G., Fraundorfer, F. & Gaich, A., 1 Apr 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163, 4, p. 124-130 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Austrian National Committee of the International Tunnelling Association

    Galler, R., Apr 2018, 2 p.

    Research output: Other contribution › Transfer

  22. Published

    Processing of industrial minerals by use of electrostatic separation

    Gehringer, S. & Flachberger, H., Apr 2018, 14th Minisymposium Verfahrenstechnik.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Staubemission in der Fördertechnik: Bidirektional gekoppelte DEM-CFD-Simulation zur Minimierung der Staubentwicklung

    Grübler, C., 27 Mar 2018, In: CADFEM Journal. 2018, 1, p. 44-45 2 p.

    Research output: Contribution to journal › Article › Research

  24. E-pub ahead of print

    Support elements in conventional tunneling - Focus on long-term behavior

    Galler, R. & Lorenz, S., 11 Mar 2018, (E-pub ahead of print) In: Underground Space. 23.018, 4, p. 277-287 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Entwicklung eines Systems zur Auskleidung von Sprengbohrlöchern beim Einsatz von losem Emulsionssprengstoff

    Seidl, T., Heiss, C. & Föger, M., 1 Mar 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163, 4, p. 131-134 4 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  26. Published

    The fragmentation‑energy fan concept and the Swebrec function in modeling drop weight testing

    Ouchterlony, F. & Sanchidrián, J. A., Mar 2018, In: Rock mechanics and rock engineering. October 2018, 51/10, p. 3129–3156 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    The state of environmental sustainability considerations in mining

    Tost, M., Hitch, M., Chandurkar, V., Moser, P. & Feiel, S., 7 Feb 2018, In: Journal of Cleaner Production. 2018, 182, p. 969 977 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Stand der Technik in der Tagbauvermessung

    Tscharf, A., 1 Feb 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163, 2, p. 57-63 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Das europäische Horizon 2020-Forschungsprojekt "Sustainable Low Impact Mining - SLIM"

    Ouchterlony, F., Sifferlinger, N. A. & Brechelmacher, A., Feb 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163, 2, p. 52-56 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    De-agglomeration rate of silicate bonded sand cores during core removal

    Stauder, B., Harmuth, H. & Schumacher, P., Feb 2018, In: Journal of materials processing technology. 252 (2018), 252, p. 652-658 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Simulation von Fördergurten mittels der DEM

    Fimbinger, E. & Prenner, M., 31 Jan 2018, Fördertechnik im Bergbau: 8. Kolloquium. Langefeld, O. (ed.). Clausthal - Zellerfeld, p. 121 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Co-existance of men and autonomous machinery in confined underground space: Need for proximity detection and systems with functional safety

    Sifferlinger, N. A., 30 Jan 2018, Use of robotics and automation for mineral prospecting and extraction: Conference Proceedings. p. 39-40 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Aufbereitungstechnische Untersuchungen an Wasseraufbereitungs-(WAB-)Schlämmen der voestalpine Stahl GmbH

    Böhm, A. & Hirsch, G., 26 Jan 2018.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Enhanced mechanical properties of Al2O3-C refractories with silicon hybridized expanded graphite

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 160-171 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Pre-conditioning of hard rocks as means of increasing the performance of disc cutters for tunneling and shaft construction

    Hartlieb, P. & Rostami, J., 1 Jan 2018, North American Tunneling 2018 Proceedings. Vol. 1. p. 185-189 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Reaction of different rock types to low-power (3.2 kW) microwave irradiation in a multimode cavity

    Hartlieb, P., Kuchar, F., Moser, P., Kargl, H. & Restner, U., Jan 2018, In: Minerals engineering. 118

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    11th Austrian Tunnel Day (Editorial)

    Galler, R., 2018, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 2018, 6, p. 618 1 p.

    Research output: Contribution to journal › Editorial

  38. Published

    Abbau- und Auffüllungsplanung des Kalksteinbergbaus und Deponie Lassing der Paltentaler Splitt und Marmorwerke GmbH

    Glatz, G., 2018

    Research output: Thesis › Master's Thesis

  39. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., Harmuth, H., Gruber, D., Schachner, S., Meunier, P. & Techer, R., 2018, In: Refractories worldforum. 10, 2, p. 63-67

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Advanced measures to characterize mechanical properties of refractories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 2018, In: China's refractories. 27, 1, p. 8-13

    Research output: Contribution to journal › Article › Research

  41. Published

    Aktuelle Forschungsvorhaben am Lehrstuhl für Subsurface Engineering der Montanuniversität Leoben

    Galler, R., 2018, In: Österreichische Ingenieur- und Architekten-Zeitschrift : ÖIAZ. 163.2018, 1-12, p. 127-133 7 p.

    Research output: Contribution to journal › Article › Research

  42. Published

    Analysis and Evaluation of Three-dimensional Geology Mechanical Model Experiment

    ZHANG, Y., 2018

    Research output: Thesis › Master's Thesis

  43. Published

    Analysis of a spodumene ore in regard of its processability by dry processing

    Haas, M., 2018

    Research output: Thesis › Master's Thesis

  44. Published

    An Analysis of Unsafe Acts of Coal Mine Rescue Accidents

    XIANG, Y., 2018

    Research output: Thesis › Master's Thesis

  45. Published

    An improved Double Hot Thermocouple Technique for Mold Slag Investigation

    Kölbl, N., Marschall, I. & Harmuth, H., 2018, AISTech 2018: Proceedings of the Iron & Steel Technology Conference : 7-10 May 2018, Philadelphia, Pa., U.S.A..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    APPLICATION OF A MODIFIED DOUBLE HOT THERMOCOUPLE TECHNIQUE FOR MOLD SLAGS

    Kölbl, N., Marschall, I., Kircher, V. & Harmuth, H., 2018, Proceedings of the 7th international congress on science and technology of steelmaking. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Assessing Economic and Environmental in the coal mining area under economic fluctuations and volatility energy market

    MOHAMED, S., 2018

    Research output: Thesis › Master's Thesis

  48. Published

    Aufbereitungstechnische Ansätze in der Wiederverwertung von Zwischenprodukten aus der Kupfermetallurgie

    Patscheider, S., 2018

    Research output: Thesis › Doctoral Thesis

  49. Published

    Automatisierung mit Autodesk Revit Familien zur BIM As-Built Dokumentation im Tunnelbau

    Leo, M. C., 2018

    Research output: Thesis › Master's Thesis

  50. Published

    Baseline study of the Paraguayan brick production sector

    Arco, C.-H., 2018

    Research output: Thesis › Master's Thesis

  51. Published

    Comparative Laboratory Studies of Conventional Comminution and High Voltage Pulse Fragmentation of an Industrial Mineral

    Tschugg, J., 2018

    Research output: Thesis › Doctoral Thesis

  52. Published

    Compounds within the system Mg-Al-Si-O-C-N for novel refractory applications

    Atzenhofer, C., 2018

    Research output: Thesis › Doctoral Thesis

  53. Published

    Comprehensive redesign of the bublon-process for the production of high-Quality and leight-weight Granulates from fine Sands with volcanic origin

    Weingrill, G., Neubacher, J. & Flachberger, H., 2018, Proceedings 29th International Mineral Processing Congress. p. 2463-2472 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Das Projekt raPHOSafe

    Hartlieb, P. & Layr, K., 2018, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 157, p. 11

    Research output: Contribution to journal › Letter

  55. Published

    Design of a ContBlast unit for lining while charging with considerations for placement of detonator and primer

    Föger, M., 2018

    Research output: Thesis › Master's Thesis

  56. Published

    Design Study for Advanced Adiabatic Compressed Air Energy Storage

    Galler, R., 2018, Energieforschungsgespräche Disentis 2018. Disentis, p. 20-21 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Development of technology for alluvial titanium ore processing under conditions of Velta LLC

    PECHERSKYI, V., 2018

    Research output: Thesis › Master's Thesis

  58. Published

    Drone Based Deformation Monitoring at the Tunnel Project Zentrum am Berg

    Chmelina, K., Gaich, A., Keuschnig, M., Delleske, R., Galler, R. & Wenighofer, R., 2018, WTC 2018 Paper Proceedings. Dubai, 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Editorial

    Galler, R., 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 2018, 12, p. 489 1 p.

    Research output: Contribution to journal › Editorial

  60. Published

    Einsatzmöglichkeiten von Faserbetontübbingen in Österreich

    Kaltenegger, K., 2018

    Research output: Thesis › Master's Thesis

  61. Published

    Embedded camera brings 3D mapping to tunnel boring machines

    Wenighofer, R., 2018, In: Vision Systems Design . 2018, January, p. 21-23 3 p.

    Research output: Contribution to journal › Article › Transfer

  62. Published

    Entwicklung calciumaluminatischer Gießschlacken unter Einbeziehung von Bor

    Prinz, G., 2018

    Research output: Thesis › Master's Thesis

  63. Published

    Entwicklung eines Ausschreibungs- und Abrechnungssystems für die Leistungen „Verwertung von Tunnelausbruchmaterial“

    Dreitler-Köhrer, J., 2018

    Research output: Thesis › Master's Thesis

  64. Published

    Entwicklung eines für die Herstellung mit dem Schleuderverfahren geeigneten Geopolymerbindemittels

    Mairitsch, E., 2018

    Research output: Thesis › Doctoral Thesis

  65. Published

    Entwicklung und Konstruktion eines Fördersystems für containermobile Aufbereitungsanlagen

    Seisenbacher, L., 2018

    Research output: Thesis › Master's Thesis

  66. Published

    Evaluation of cutting forces in granite treated with microwaves on the basis of multiple linear regression analysis

    Shepel, T., Grafe, B., Hartlieb, P., Drebenstedt, C. & Malovyk, A., 2018, In: International Journal of Rock Mechanics and Mining Sciences. 107, p. 69-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Feasibility study of Aynak Copper Deposit – Logistics, Infrastructure, Processing and Auxiliary Operations

    NOORHAN, W., 2018

    Research output: Thesis › Master's Thesis

  68. Published

    Feasibility Study of Aynak Copper Deposit-Production Planning

    BARYAL, M., 2018

    Research output: Thesis › Master's Thesis

  69. Published

    Forschung im Fachbereich Subsurface Engineering - gerüstet für die Zukunft! Editorial

    Galler, R., 2018, In: World of mining, surface & underground. 70, 3, p. 135-136 2 p.

    Research output: Contribution to journal › Editorial

  70. Published

    From laboratory to big scale - Results of experimental and numerical investigations on tubbing support

    Gehwolf, P., 2018, Paper Proceedings WTC 2018. Dubai, 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Gebirgsmechanische Betrachtung und Beschreibung des Festenverhaltens in einem tiefen österreichischen Hartgesteinsbergbau

    Daborer, A., 2018

    Research output: Thesis › Master's Thesis

  72. Published

    Integrated mineral technologies for more sustainable raw material supply (ITERAMS)

    Obenaus-Emler, R., Raatikainen, J., Sylvain Guignot, S., Heiskamen, K., Ciroth, A., Guimerà, J., Paajanen, M. & Kiunnen, P., 2018.

    Research output: Contribution to conference › Paper

  73. Published

    Integrated mineral technologies for more sustainable raw material supply (ITERAMS)

    Obenaus-Emler, R., Raatikainen, J., Guignot, S., Heiskanen, K., Ciroth, A., Guimera, J., Paajanen, M. & Kinnunen, P., 2018.

    Research output: Contribution to conference › Paper

  74. Published

    Investigation into the utilisation and exploitation of abandoned mining areas, with a recommended plan for remediation and subsequent use of the New Mill Site, Roseworthy, Cornwall, UK

    WELLS, D., 2018

    Research output: Thesis › Master's Thesis

  75. Published

    Investigation of Compressive Refractory Creep

    Jin, S. & Harmuth, H., 2018, In: China's refractories. 27, 3, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Keramik aus der Franz-Josephs-Grotte in Unterzeiring: die naturwissenschaftliche Bewertung eines bronzezeitlichen Keramikwerkstoffes

    Preßlinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2018, In: Da schau her. 2018, 3, p. 16-18 3 p.

    Research output: Contribution to journal › Article › Research

  77. Published

    Konstruktion eines Labor - Hochgradient Magnetscheiders und Sortierung im Magnetfeld feindisperser Eisenerzminerale

    Eglauer, C., 2018

    Research output: Thesis › Master's Thesis

  78. Published

    Logistische Herausforderungen bei dem Einsatz eines kamerabasierten Aufnahmesystems zur Erfassung der Ortsbrust eines TBM-Vortriebes

    Six, G., 2018

    Research output: Thesis › Master's Thesis

  79. Published

    Methods for Characterizing Cracks Induced in Rock

    Nicco, M., Holley, E., Hartlieb, P., Kaunda, R. & Nelson, P., 2018, In: Rock mechanics and rock engineering. p. 1-19 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Mine Health and Safety in Postgraduate Education: Safe Mine PhD-Programme

    Hutwalker, A., Binder, A., Langefeld, O., Galler, R., Johansson, J., Weimer, L., Braun, T. & Lottermoser, B., 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 2018, 12, p. 528-531 4 p.

    Research output: Contribution to journal › Article › Research

  81. Published

    Mineralische Rohstoffe: Die Basis für Innovation und Nachhaltigkeit

    Moser, P., 2018, Zukunft Erkennen/ Gestalten. Androsch, H. & Pelinka, P. (eds.). Wien, p. 224-230 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Motivation Crowding and Participation in Agri-Environmental Schemes – The Case of the Austrian Öpul-Programme in Vineyards

    Kieninger, P. R., Gugerell, K., Biba, V., Auberger, I., Silvia, W. & Penker, M., 2018, In: European countryside . 10.2018, 3, p. 355-376 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Nassgewinnung von Sand und Kies - Stand der Technik und praktische Untersuchungen an ausgewählten Grundwasserseen in Niederösterreich

    Schmid, A., 2018

    Research output: Thesis › Master's Thesis

  84. Published

    Numerical analysis of a limestone underground mine based on a room and pillar underground mine in Spain

    PAYAN DURAN, S., 2018

    Research output: Thesis › Master's Thesis

  85. Published

    Optimization of Ergonomic and Logistic Concepts for Automated Bolting Units

    Schöffmann, M., 2018

    Research output: Thesis › Master's Thesis

  86. Published

    Organization of Second-Class Explosives “Amonal” and “Zayad”

    SHYLIN, S., 2018

    Research output: Thesis › Master's Thesis

  87. Published

    Österreichischer Tunneltag 2018 und Geomechanik-Kolloquium: Rubrik "Praxis und Wissen" BHM 12/2018

    Galler, R., 2018, Springer Wien. 2 p.

    Research output: Book/Report › Other report › Research

  88. Published

    Planung und Durchführung einer systematischen Parameterstudie an einem innovativen Zerkleinerungsaggregat zur Erzeugung qualitativ hochwertiger Feinkalkprodukte

    Auer, M., 2018

    Research output: Thesis › Master's Thesis

  89. Published

    Prediction of Methane Emission Quantity Based on Back- Propagation Neural Network

    FAN, Y., 2018

    Research output: Thesis › Master's Thesis

  90. Published

    Projekt "XMercury" zur Quecksilber-Entfrachtung im Zementklinkerprozess - Schlussbetrachtungen zu Einsatzmöglichkeiten und -grenzen

    Salzer, F. & Flachberger, H., 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 2018, 8, p. 297-304

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Recovery of Metals from Industrial Waste Waters

    Sedlazeck, K. P., Vollprecht, D., Frisch, G., Müller, P., Mischitz, R., Öfner, W., Schlömann, M., Schopf, S. & Pomberger, R., 2018, p. 423. 438 p.

    Research output: Contribution to conference › Paper › peer-review

  92. Published

    Recovery of Metals from Metallurgical Waste Waters

    Sedlazeck, K. P., Vollprecht, D., Öfner, W., Müller, P., Mischitz, R., Frisch, G., Schlömann, M., Schopf, S. & Pomberger, R., 2018.

    Research output: Contribution to conference › Abstract

  93. Published

    Research@ZaB als regionales Flaggschiff

    Galler, R., 2018, Kurzfassung der Beiträge - Kolloquium Forschung und Entwicklung für Zement und Beton. p. 60-62 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Research@ZaB, das neue F & E sowie Trainings- und Schulungszentrum

    Galler, R., 2018, In: Österreichische Ingenieur- und Architekten-Zeitschrift : ÖIAZ. 2018, 1-12, p. 135-141 7 p.

    Research output: Contribution to journal › Article › Research

  95. Published

    Reuse of tunnel excavation material - real-time measurements and decision-making on the construction site of Research@ZaB - Zentrum am Berg - an underground research facility in Eisenerz, Austria

    Seidler, I., 2018

    Research output: Thesis › Master's Thesis

  96. Published

    SafeMine PhD-Programme - Educating the Mine Health and Safety Workforce of Tomorrow

    Hutwalker, A., Binder, A., Langefeld, O., Galler, R., Johansson, J., Weimer, L., Braun, T. & Lottermoser, B., 2018, In: Mining Report. 2018, 5, p. 400-405 6 p.

    Research output: Contribution to journal › Article › Research

  97. Published

    Steinschlagsimulationen zur Festlegung einer Schutzzone in einem Tagebau

    Forsthuber, M., 2018

    Research output: Thesis › Master's Thesis

  98. Published

    Sustainable technology of waste electrical and electronic equipment (WEEE) recycling

    LYSENKO, D., 2018

    Research output: Thesis › Master's Thesis

  99. Published

    The Development of Fractures in Overlying Strata and Design of Methane Drainage on 2874W working face Qianjiaying Coal Mine

    YEDIGEYEVA, G., 2018

    Research output: Thesis › Master's Thesis

  100. Published

    The liquid limit and the undrained shear strength - comparison of different determination methods

    Motamedi, Z., 2018

    Research output: Thesis › Master's Thesis

  101. Published

    Thermal and thermomechanical evaluations of channel induction furnace applying strong insulation containing lightweight aggregate

    Jin, S., Harmuth, H. & Gruber, D., 2018, In: Ironmaking and steelmaking. 2018, 45, p. 514-518 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...8 9 10 11 12 13 14 15 ...36 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 6601