Department Materials Science

Organisational unit: Departments and Institutes

901 - 1000 out of 5,453Page size: 100

Research output

  1. 2021
  2. Published

    An understanding of hydrogen embrittlement in nickel grain boundaries from first principles

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 2021, In: Materials and Design. 2021, 212, p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Assessment of Various DFT-based Methods for Predicting Temperature Dependence of Elastic Constants

    Jechtl, T., 2021

    Research output: Thesis › Master's Thesis

  4. Published

    Atomsondenuntersuchungen zur Diffusion von Si, Mn und Cr in einem perlitischen Stahl

    Proyer, A., 2021

    Research output: Thesis › Master's Thesis

  5. Published

    Bayesian optimization of hubbard u’s for investigating InGaN superlattices

    Popov, M., Spitaler, J., Romaner, L., Bedoya-Martínez, N. & Hammer, R., 2021, In: Electronic materials. 2021, 2, p. 370-381

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    CALPHAD assessment of the Ti-W system including experimental and ab-initio data

    Spitaler, T. & Romaner, L., 2021.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Cathodic arc evaporated high-entropy alloy-based metallic and nitride coatings

    Wasenbelz, F., 2021

    Research output: Thesis › Master's Thesis

  8. Published

    Charakterisierung einer additiv gefertigten Zirkonoxidkeramik für Dentalanwendungen und Implantate

    Endt, S., 2021

    Research output: Thesis › Master's Thesis

  9. Published

    Composite of Medium Entropy Alloys Synthesized Using Spark Plasma Sintering

    Chawake, N., Raman, L., Ramasamy, P., Ghosh, P., Spieckermann, F., Gammer, C., Murty, B. S., Kottada, R. S. & Eckert, J., 2021, In: Scripta Materialia. 191.2021, 46, p. 46-51 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Contact Damage of Alumina-Based Layered Ceramics with Tailored Microstructure

    Jabr, A., 2021

    Research output: Thesis › Master's Thesis

  11. Published

    Correlation Between the Crystallized Structure of Mg67Zn28Ca5 Amorphous Alloy and the Corrosion Behavior in Simulated Body Fluid

    Chen, B., Wang, D., Zhang, L., Geng, G., Yan, Z. & Eckert, J., 2021, In: Journal of non-crystalline solids. 2021, 553, 7 p., 120473.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Correlation of process conditions, microstructure and mechanical properties of magnetron sputtered equiatomic CrMnFeNiCo alloys

    Baumegger, W., 2021

    Research output: Thesis › Master's Thesis

  13. Published

    Cracking Mechanisms of High-Alloyed Tool Steels processed with Laser Powder Bed Fusion

    Platl, J., 2021

    Research output: Thesis › Doctoral Thesis

  14. Published

    Cross-sectional Characterisation of Thin Films for the Knowledge-based Design of Hard Coatings

    Gruber, D., 2021

    Research output: Thesis › Doctoral Thesis

  15. Published

    Damage Indicators for early Failure Detection under Cyclic Loading considering Creep Strain of WC-Co Hardmetals at 700 °C and 800 °C

    Maier, K., 2021

    Research output: Thesis › Doctoral Thesis

  16. Published

    Damage initiation in hard-coated hard metal substrates under normal and tangential loads at elevated temperature

    Walch, L., 2021

    Research output: Thesis › Master's Thesis

  17. Published

    Deformation-Mode-Sensitive Behavior of CuZr-Based Bulk Metallic Glasses Under Dynamic Loading

    Rezvan, A., Sarac, B., Soprunyuk, V., Spieckermann, F., Gammer, C., Sheng, H., Sifferlinger, N. A. & Eckert, J., 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 2021, 52, 8, p. 8-13 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Design of Functional Materials: A Journey from Hard Coatings to Multifunctional Thin Films

    Schalk, N., 2021

    Research output: Thesis › Habilitation thesis › peer-review

  19. Published

    Development of TiAl alloys on the demand of additive manufacturing and high-temperature application

    Wimler, D., 2021

    Research output: Thesis › Doctoral Thesis

  20. Published

    Effects of metallic Y and Ti addition on the dispersion and solubility behaviour of added Y2O3 in an ODS FeCrMnNiCo HEA during mechanical alloying

    Gruber, P., 2021

    Research output: Thesis › Master's Thesis

  21. Published

    Einfluss des Gefüges von explosionsverfestigtem Hadfield-Stahl auf die Ausbreitung akustischer Oberflächenwellen

    Feichtenschlager, L., 2021

    Research output: Thesis › Master's Thesis

  22. Published

    Enhancing Antibacterial Properties on Micro-/Nano-Patterned Ti-Based Bulk Metallic Glass via Self-Organizing Hierarchical Biopolymers for Hard Tissue Implant Applications

    Cai, F.-F., Sarac, B., Ketov, S. V. & Eckert, J. (Co-editor), 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    Entwicklung einer maßgeschneiderten Wärmebehandlungsroute für SLM gefertigte γ-TiAl-Hochtemperaturkomponenten

    Pürstl, F., 2021

    Research output: Thesis › Master's Thesis

  24. Published

    Ermittlung der elektro-mechanischen Eigenschaften von piezoelektrischen Vielschichtaktoren

    Grünbichler, H., 2021

    Research output: Thesis › Doctoral Thesis

  25. Published

    Erweichung von Kunststoffformenstählen beim Spritzgießen

    Gschöpf, B., 2021

    Research output: Thesis › Master's Thesis

  26. Published

    Evolution of structure, residual stress, thermal stability and wear resistance of nanocrystalline multilayered Al0.7Cr0.3N-Al0.67Ti0.33N coatings

    Spor, S., Jäger, N., Meindlhumer, M., Hruby, H., Burghammer, M., Nahif, F., Mitterer, C., Keckes, J. & Daniel, R., 2021, In: Surface & coatings technology. 425.2021, 15 November, 9 p., 127712.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

    Wallis, C., Buchmayr, B., Bermejo, R. & Supancic, P., 2021, In: Additive Manufacturing. 38.2021, February, 14 p., 101799.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Fatigue crack growth of deformed pearlitic rail steels under multiaxial loading

    Schnalzger, G., Maierhofer, J., Daves, W., Pippan, R. & Hohenwarter, A., 2021, In: Procedia Structural Integrity. 39, C, p. 313-326 14 p.

    Research output: Contribution to journal › Conference article › peer-review

  29. Published

    Fracture Toughness Measurement

    Lube, T., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 762-774

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  30. Published

    High-Entropy Eutectic Composites with High Strength and Low Young's Modulus

    Maity, T., Prashanth, K. G., Balcı, Ö., Cieślak, G., Spychalski, M., Kulik, T. & Eckert, J., 2021, In: Material Design and Processing Communications. 2021, 3, 8 p., e211.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    High Temperature Nanoindentation as a Versatile Tool to Examine Thermally Activated Deformation Mechanisms

    Kappacher, J., 2021

    Research output: Thesis › Doctoral Thesis

  32. Published

    How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 2021, In: Acta materialia. 2021, 216, 11 p., 117110.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Impact of Conditioning Processes on the Performance of Rotating Anodes

    Sommerauer, M., 2021

    Research output: Thesis › Master's Thesis

  34. Published

    Impact of the stacking sequence on the stability of transition-metal diborides

    Leiner, T., 2021

    Research output: Thesis › Master's Thesis

  35. Published

    Influence of explosive depth hardening on the formation of craze cracks in Hadfield steels

    Rockenschaub, M., 2021

    Research output: Thesis › Master's Thesis

  36. Published

    In-situ investigations of hydrogen-material interaction

    Massone, A., 2021

    Research output: Thesis › Doctoral Thesis

  37. Published

    In situ observation of the phase evolution during a physical simulation of the spark plasma sintering process of a γ-TiAl based alloy

    Musi, M., Galy, B., Monchoux, J.-P., Couret, A., Clemens, H. & Mayer, S., 2021.

    Research output: Contribution to conference › Poster › Research

  38. Published

    Interfacial damage of TiN coated high speed steels under a realistic spectrum of shear- and normal loads

    Gsellmann, M., 2021

    Research output: Thesis › Doctoral Thesis

  39. Published

    Investigation into the mechanical character of grain boundaries in technically pure and micro-doped molybdenum

    Jakob, S., 2021

    Research output: Thesis › Doctoral Thesis

  40. Published

    Locally resolved deformation and fracture processes near interfaces

    Alfreider, M., 2021

    Research output: Thesis › Doctoral Thesis

  41. Published

    Magnetostrictive behavior of severe plastically deformed, nanocrystalline materials

    Paulischin, A. B., 2021

    Research output: Thesis › Master's Thesis

  42. Published

    Mechanical Constitution of Stable and Metastable Phases in Cu20Sn

    Lumper, L., 2021

    Research output: Thesis › Master's Thesis

  43. Published

    Mechanical Properties and Deformation Mechanisms of austenitic Nitrogen Steels under different Loading Conditions

    Hahn, C. E. K., 2021

    Research output: Thesis › Doctoral Thesis

  44. Published

    Mechanische Eigenschaften von Varistorkeramiken

    Bleicher, C., 2021

    Research output: Thesis › Master's Thesis

  45. Published

    Microscale characterisation and modelling of the highly nonlinear electrical behaviour of zinc oxide varistors

    Kaufmann, B., 2021

    Research output: Thesis › Doctoral Thesis

  46. Published

    Microstructural and Mechanical Properties of Si-alloyed AlCrN Hard Coatings: Grain Boundary Segregation Engineering by CrN Precipitation

    Ziegelwanger, T., 2021

    Research output: Thesis › Master's Thesis

  47. Published

    Mikrostruktureinfluss auf Schwellwertverhalten und Bruchzähigkeit von additiv gefertigten γ-Titanaluminiden

    Zeiler, S., 2021

    Research output: Thesis › Master's Thesis

  48. Published

    Mikrostrukturentwicklung und Bruchverhalten lamellarer Werkstoffe hergestellt durch Hochverformung

    Schwarz, K., 2021

    Research output: Thesis › Doctoral Thesis

  49. Published

    Nanoscaled magnetic materials with tunable properties

    Stückler, M., 2021

    Research output: Thesis › Doctoral Thesis

  50. Published

    Novel Multifunctional Coatings for Advanced Tribological Applications

    Jäger, N., 2021

    Research output: Thesis › Doctoral Thesis

  51. Published

    Observation of an electrical breakdown at ZnO Schottky contacts in varistors

    Kaufmann, B., Billovits, T. & Supancic, P., 2021, In: Journal of the European Ceramic Society. 41, 3, p. 1969-1974

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Origin of Structural Heterogeneity in Zr-Co-Al Metallic Glasses from the Point of View of Liquid Structures

    Zhang, H., Sun, H., Pan, S., Şopu, D., Peng, C., Zhao, K., Song, K., Yuan, S., Qiao, J., Wang, L. & Eckert, J., 2021, In: Journal of non-crystalline solids. 2021, 553, 12 p., 120501.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Phase constitution in an intermetallic Ti-37Al-10Nb alloy: what we can learn about the phase equilibria

    Rashkova, B., Brabetz, M., Mendez Martin, F., Distl, B., Hauschildt, K., Stein, F. & Clemens, H., 2021.

    Research output: Contribution to conference › Poster › Research

  54. Published

    Plastic Starin Triggers Mechanically Induced Grain Boundary Migration in Nanomaterials

    Renk, O., Kapp, M., Eckert, J. & Pippan, R., 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  55. Published

    Precipitation Evolution of a Laser Powder Bed Fused FeCoMo Alloy with Atom Probe Tomography

    Cui, C., 2021

    Research output: Thesis › Master's Thesis

  56. Published

    Processing and characterization of alumina - zirconia textured ceramics

    Wratschko, M., 2021

    Research output: Thesis › Master's Thesis

  57. Published

    Raman spectroscopy of barium titanate based relaxor ferroelectric ceramics

    Kaliyaperumal Veerapandiyan, V., 2021

    Research output: Thesis › Doctoral Thesis

  58. Published

    Resistance Spot Welding of Third Generation Advanced High Strength Steels

    Stadler, M., 2021

    Research output: Thesis › Doctoral Thesis

  59. Published

    Selective Laser Melting of a Zr-based Bulk Metallic Glass for Medical Applications

    Spuller, M., 2021

    Research output: Thesis › Master's Thesis

  60. Published

    Simulation der Rissausbreitung im Crash

    Kunter, K., 2021

    Research output: Thesis › Doctoral Thesis

  61. Published

    Simulation von Beschusstests an warmgewalzten Ti-6Al-4V Platten mit unterschiedlichen Mikrostrukturen

    Schwendenwein, P., 2021

    Research output: Thesis › Master's Thesis

  62. Published

    Sputter deposited TiAlN/AlTiN and CrAlN/TiAlN: multilayer coatings

    Blumauer, S., 2021

    Research output: Thesis › Master's Thesis

  63. Published

    Stable and metastable phases in Cu20Sn investigated via high resolution methods

    Lumper, L., Kappacher, J., Clemens, H. & Maier-Kiener, V., 2021.

    Research output: Contribution to conference › Poster › Research

  64. Published

    Stress engineering to reduce mechanical loading in Cu-based metallizations

    Souli, I., 2021

    Research output: Thesis › Doctoral Thesis

  65. Published

    Structural, electrical and mechanical properties of AgAuSi thin film metallic glasses on polymer substrates

    Weniger, L.-M., 2021

    Research output: Thesis › Master's Thesis

  66. Published

    Study on Stabilization of α-case in Ti-6Al-4V

    Lukas, T., 2021

    Research output: Thesis › Master's Thesis

  67. Published

    Study on the interface structure of transition metal nitride thin films by advanced electron microscopy

    Chen, Z., 2021

    Research output: Thesis › Doctoral Thesis

  68. Published

    Subcritical Crack Growth: Modeling of the v–K Curve in Different Environments

    Bermejo, R., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 811-817

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  69. Published

    Surface Damage of Rotating Anodes and the Impact on the X-ray Emission

    Siller, M., 2021

    Research output: Thesis › Doctoral Thesis

  70. Published

    Technology Innovation in Direct Fastening on Concrete and Steel

    Tropper, F., 2021

    Research output: Thesis › Master's Thesis

  71. Published

    Temperature and Chemical Bonding Effects on the Brittle-to-Ductile Transition in Metal-Metalloid Glasses

    Sopu, D., Moitzi, F. & Eckert, J., 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  72. Published

    The influence of 2 at.% to 4 at.% zirconium on phase equilibria in γ-based Ti–Al alloys

    Kardos, S., 2021

    Research output: Thesis › Master's Thesis

  73. Published

    Thermomechanical processing and high-temperature behavior of spark-plasma-sintered near-α Ti-8242NbS alloy

    Obersteiner, D., 2021

    Research output: Thesis › Master's Thesis

  74. Published

    Towards Knowledge-based Design of Multi-element Cathodes for Cathodic Arc Deposition Processes

    Golizadeh Najafabadi, M., 2021

    Research output: Thesis › Doctoral Thesis

  75. Published

    Tribological performance of different material pairings of exhaust valve and valve seat under impact-sliding conditions

    Erlacher, G., 2021

    Research output: Thesis › Master's Thesis

  76. Published

    Tribological properties of sputter-deposited Mo films on polyimide

    Kobierska, E., Hirn, S., Cordill, M. J., Franz, R. & Rebelo de Figueiredo, M., 2021.

    Research output: Contribution to conference › Poster › Research

  77. Published

    Untersuchungen zur Produktivität im selektiven Laserschmelzprozess von Ti-6Al-4V Bauteilen

    Pogrielz, T., 2021

    Research output: Thesis › Master's Thesis

  78. Published

    Zerstörungsfreie Charakterisierung von Furnieren für strukturelle Verbundwerkstoffe: Evaluierung von Methoden und Einflussfaktoren Maximilian

    Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Konnerth, J., Feist, F., Baumann, G., Huber, C. & Müller, U., 2021, In: Holztechnologie. 62.2021, 1, p. 5-18 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. 2020
  80. Published

    Microstructural Effects on the Interfacial Adhesion of Nanometer-Thick Cu Films on Glass Substrates: Implications for Microelectronic Devices

    Lassnig, A., Terziyska, V. L., Zalesak, J., Jörg, T., Toebbens, D. M., Griesser, T., Mitterer, C., Pippan, R. & Cordill, M. J., 28 Dec 2020, In: ACS Applied Nano Materials. 4.2021, 1, p. 61-70 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Initiation of fatigue damage in ultrafine grained metal films

    Glushko, O. & Kiener, D., 27 Dec 2020, In: Acta Materialia. 2021, 206, 10 p., 116599.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM

    Moritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Letofsky-Papst, I., Czettl, C., Pohler, M. & Schalk, N., 25 Dec 2020, In: Surface & coatings technology. 404.2020, 25 December, 9 p., 126632.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Exploring structural changes, manufacturing, joining, and repair of intermetallic γ-TiAl-based alloys: Recent progress enabled by in situ synchrotron X-Ray techniques

    Spörk-Erdely, P., Staron, P., Liu, J., Kashaev, N., Stark, A., Hauschildt, K., Maawad, E., Mayer, S. & Clemens, H., 19 Dec 2020, In: Advanced engineering materials. 23.2020, 11, 32 p., 2000947.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    METHOD FOR PRODUCING AN ARTICLE FROM A MARAGING STEEL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 17 Dec 2020, IPC No. C22C 38/ 50 A I, Patent No. US2020392593, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  85. Published

    Selective Laser Melting of a Near-alpha Ti6242S Alloy for High-Performance Automotive Parts

    Fleißner-Rieger, C., Pfeifer, T., Jörg, T., Kremmer, T., Brabetz, M., Clemens, H. & Mayer, S., 17 Dec 2020, In: Advanced engineering materials. 2021, p. 1-12 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Role of layer order on the equi-biaxial behavior of Al/Mo bilayers

    Cordill, M. J., Kreiml, P., Putz, B., Mitterer, C., Thiaudière, D., Mocuta, C., Renault, P.-O. & Faurie, D., 10 Dec 2020, In: Scripta materialia. 194.2021, 15 March, 5 p., 113656.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Boron Nitride Nanotubes Versus Carbon Nanotubes: A Thermal Stability and Oxidation Behavior Study

    Kostoglou, N., Tampaxis, C., Charalambopoulou, G., Constantinides, G., Ryzhkov, V., Doumanidis, C. C., Matovic, B., Mitterer, C. & Rebholz, C., 5 Dec 2020, In: Nanomaterials. 10.2020, 12, 9 p., 2435.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Diffusion Bonding of High-Alloyed Tool Steels with Maraging and Precipitation Hardening Steels

    Göbl, M., Eder, H., Prestl, A., Siller, I. & Schnitzer, R., 2 Dec 2020, In: Metals : open access journal . 10, 12, p. 1-11 11 p., 1622.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Signature of local stress states in the deformation behavior of metallic glasses

    Bian, X., Şopu, D., Wang, G., Sun, B., Bednarčik, J., Gammer, C., Zhai, Q. & Eckert, J., 1 Dec 2020, In: NPG Asia Materials. 12, 1, 59.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Microstructure, strength and fracture toughness of CuNb nanocomposites processed with high pressure torsion using multi-sector disks

    Hohenwarter, A., Dec 2020, In: Scripta Materialia. 189.2020, December, p. 48-52 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Selective laser manufacturing of Ti-based alloys and composites: impact of process parameters, application trends, and future prospects

    Singh, N., Hameed, P., Ummethala, R., Manivasagam, G., Prashanth, K. G. & Eckert, J., Dec 2020, In: Materials today advances. 8, 100097.

    Research output: Contribution to journal › Review article › peer-review

  92. Published

    Selective laser melting of high-strength, low-modulus Ti–35Nb–7Zr–5Ta alloy

    Ummethala, R., Karamched, P. S., Rathinavelu, S., Singh, N., Aggarwal, A., Sun, K., Ivanov, E., Kollo, L., Okulov, I., Eckert, J. & Prashanth, K. G., Dec 2020, In: Materialia. 14.2020, December, 100941.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Phase transformation, thermal behavior and magnetic study of new Co80-xTaxSi5C15 (x = 0, 5) glassy/nanocrystalline alloys prepared by mechanical alloying

    Nickjeh, H. S., Taghvaei, A. H., Ramasamy, P. & Eckert, J., 30 Nov 2020, In: Journal of alloys and compounds. 843, 155913.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Effective electrocatalytic methanol oxidation of Pd-based metallic glass nanofilms

    Sarac, B., Karazehir, T., Ivanov, Y. P., Putz, B., Greer, A. L., Sarac, A. S. & Eckert, J., 28 Nov 2020, In: Nanoscale. 12.2020, 44, p. 22586-22595 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. E-pub ahead of print

    Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

    Meindlhumer, M., Brandt, L. R., Zalesak, J., Rosenthal, M., Hruby, H., Kopecek, J., Salvati, E., Mitterer, C., Daniel, R., Todt, J., Keckes, J. & Korsunsky, A. M., 28 Nov 2020, (E-pub ahead of print) In: Materials and Design. 2021, 198, 16 p., 109365.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    In situ high-energy X-ray diffraction study of thermally-activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites

    Song, K., Wu, S., Kaban, I., Stoica, M., Bednarčík, J., Sun, B., Cao, C., Wang, G., Wang, L. & Eckert, J., 15 Nov 2020, In: Journal of alloys and compounds. 2020, 841, 155781.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy

    Burtscher, M., Alfreider, M., Schmuck, K., Clemens, H., Mayer, S. & Kiener, D., 11 Nov 2020, In: Journal of Materials Research. 2021, 12, p. 2465-2478 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Addressing Fracture Properties of Individual Constituents Within a Cu-WTi-SiOx-Si Multilayer

    Alfreider, M., Zechner, J. & Kiener, D., 10 Nov 2020, In: JOM. 72.2020, 12, p. 4551-4558 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. E-pub ahead of print

    Stress-strain Behavior and Microstructural Evolution of Ultra-High Carbon Fe-C-Cr-V-Mo Steel Subjected to Hot Deformation

    Wang, R., Zhang, W., Li, Y., Li, D., Kang, Y., Yang, X., Eckert, J. & Yan, Z., 5 Nov 2020, (E-pub ahead of print) In: Materials characterization. 2021, 110746, 110746.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

    Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    High-temperature phenomena in an advanced intermetallic nano-lamellar γ-TiAl-based alloy. Part I: Internal friction and atomic relaxation processes

    Usategui, L., Klein, T., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., Nov 2020, In: Acta materialia. 200, 200, p. 442-454 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Mechanical properties of zirconia ceramics biomimetically coated with calcium deficient hydroxyapatite

    Macan, J., Dutour Sikiric, M., Deluca, M., Bermejo, R., Baudín, C., Plodinec, M., Salamon, K., Ceh, M. & Gajovic, A., Nov 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 111, 104006.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...6 7 8 9 10 11 12 13 ...55 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben