Department Economic and Business Management

Organisational unit: Departments and Institutes

451 - 500 out of 1,359Page size: 50

Research output

  1. 2017
  2. Published

    Factors and market trends impacting the efficiency of compressor systems

    Brezina, B., 2017

    Research output: Thesis › Master's Thesis

  3. Published

    Generierung von Testdaten für Materialflusssteuerungen im Bereich der Intralogistik durch den Einsatz einer Host-Simulation

    Herka, J., 2017

    Research output: Thesis › Master's Thesis

  4. Published

    Global Manufacturing Strategy

    Sagadin, M., 2017

    Research output: Thesis › Master's Thesis

  5. Published

    Industrie 4.0 für KMU

    Woschank, M., Zsifkovits, H., Altendorfer-Kaiser, S. & Kapeller, J., 2017, p. 244.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Industrie 4.0 in der österreichischen Industrie - Interpretation, Umsetzung, Hindernisse

    Graninger, G., 2017

    Research output: Thesis › Master's Thesis

  7. Published

    Industrielogistik

    Zsifkovits, H., Woschank, M., Altendorfer-Kaiser, S., Kapeller, J. & Buschek, C., 2017, p. 246.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Integrative Zusammenführung eines Qualitäts-, Umwelt-, Sicherheits- und Energiemanagementsystems mit einem Lean Manufacturing System am Beispiel eines Traktorenproduktionswerks

    Kampenhuber, A., 2017

    Research output: Thesis › Master's Thesis (University Course)

  9. Published

    Konzeption eines Kennzahlensystems zur Bewertung der Hochlaufphase intralogistischer Systeme

    Wolf, W., 2017

    Research output: Thesis › Master's Thesis

  10. Published

    Konzept zur Reorganisation der Verwaltung von Kommunen, durchgeführt am Beispiel der Marktgemeinde Kraubath an der Mur

    Maier, A., 2017

    Research output: Thesis › Master's Thesis (University Course)

  11. Published

    Life Cycle Assessment of Power- to- Gas Business Models - Inventory Analysis and Impact Assessment

    Sledz, C., 2017

    Research output: Thesis › Master's Thesis

  12. Published

    Mehrdimensionale Optimierung von Logistikprozessen

    Woschank, M., 2017, p. 240.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Optimierung der Produktionsgrobplanung bei BÖHLER Schmiedetechnik GmbH & Co KG

    Wulz, M. C., 2017

    Research output: Thesis › Master's Thesis

  14. Published

    Qualitätsarbeit in der Automobilindustrie mit Fokus auf Anlauf und Serienproduktion

    Bauernhofer, T. H., 2017

    Research output: Thesis › Master's Thesis

  15. Published

    Technologisch-wirtschaftliche Realisierungsmöglichkeiten zur Nutzung von industriellen Energiepotenzialen im städtischen Verbund

    Steinacker, S., 2017

    Research output: Thesis › Master's Thesis

  16. Published

    The Influence of Big Data on Production and Logistics

    Altendorfer-Kaiser, S., 2017, Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing. Lödding, H., Riedel, R., Thoben, K.-D., von Cieminski, G. & Kiritsis, D. (eds.). Cham: Springer International Publishing, Vol. Part I. p. 222-227 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  17. Published

    Transformationen: Neue Wege zu industrieller Nachhaltigkeit

    Biedermann, H. (Editor), Vorbach, S. (Editor) & Posch, W. (Editor), 2017, 1 ed. München. 142 p. (Sustainability Management for Industries; vol. 7)

    Research output: Book/Report › Book › Research

  18. Published

    Wissenschaftlicher Industrielogistik-Dialog: Logistisches Produktionsmanagement

    Zsifkovits, H. E. (Editor) & Altendorfer-Kaiser, S. (Editor), 2017, Wissenschaftlicher Industrielogistik-Dialog. 1 ed. Berlin, Vol. 4. 156 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. 2016
  20. Published

    Energy efficiency in Austria – current developments and challenges for energy intensive industries

    Topic, M. & Tschiggerl, K., 15 Dec 2016, p. 413. 420 p.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Entwicklung eines Life-Cycle-orientierten Ansatzes zur Bewertung energieeffizienter, nachhaltiger Gießereiprodukte

    Biedermann, H., Raupenstrauch, H., Topic, M., Tschiggerl, K., Rauter, M., Egger, D., Doschek, K. & Raonic, Z., 9 Dec 2016, 17 p.

    Research output: Book/Report › Commissioned report › Research

  22. Published

    Lean Smart Maintenance - lernorientiertes, wertschöpfendes Asset Management

    Biedermann, H., 6 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    Lean Smart Maintenance - Lernorientiertes, wertschöpfendes Asset Management

    Biedermann, H., 6 Dec 2016, Smart Maintenance für Smart Factories. p. 2-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Georg Fischer Fittings GmbH - Instandhaltungsreorganisation

    Kosar, G., Biedermann, H., Kleindienst, B. & Kinz, A., Dec 2016

    Research output: Book/Report › Commissioned report › Research

  25. Published

    Outsourcing Engineering Activities: Analysis and Improvement of the Process

    Kleindienst, B., 28 Nov 2016, 176 p.

    Research output: Book/Report › Book › Research

  26. Published

    Assessment: Der erste Schritt zur Maintenance 4.0

    Kinz, A., 16 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    Ein (Reifegrad)-Modell zur Beurteilung der Datenqualität: Ausarbeitung und Darstellung am Beispiel der perfektiven Instandhaltung

    Bernerstätter, R., Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Identifying “hot spots” for energy efficiency in the foundry industry

    Topic, M. & Tschiggerl, K., 21 Oct 2016.

    Research output: Contribution to conference › Paper › peer-review

  29. Published

    Identifying “hot spots” for energy efficiency in the foundry industry

    Topic, M., 21 Oct 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  30. Published

    Lean Smart Maintenance

    Biedermann, H., 18 Oct 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    Wire 20+ Produkt- und Kundenanalyse

    Biedermann, H., Tschiggerl, K., Mündler, A., Kleindienst, B. & Kühnast, R., 12 Oct 2016, 35 p.

    Research output: Book/Report › Commissioned report › Research

  32. Published

    Lean Smart Maintenance: Konzepte, Instrumente und Anwendungen für eine effiziente und intelligente Instandhaltung

    Biedermann, H., 5 Oct 2016, Köln. 203 p.

    Research output: Book/Report › Scholarly edition

  33. Published

    Lean Smart Maintenance: Wertschöpfende, lernorientierte und ressourceneffiziente Instandhaltung

    Biedermann, H., 5 Oct 2016, Lean Smart Maintenance: Konzepte, Instrumente und Anwendungen für eine effiziente und intelligente Instandhaltung. Biedermann, H. (ed.). Köln, p. 19-29

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Lean Smart Maintenance - Konzepte, Instrumente und Anwendungen für eine effiziente und intelligente Instandhaltung

    Biedermann, H., 5 Oct 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    Smarte Instandhaltung und Service: Praktischer Workaround um Industrie 4.0 voranzutreiben

    Mündler, A. & Schriebl, M., 4 Oct 2016, Lean Smart Maintenance: Konzepte, Instrumente und Anewndungen für eine effiziente und intelligente Instandhaltung. 1 ed. Köln, p. 181 - 191 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    Smart Guide: Erhöhung der Resilienz von Wertschöpfungsnetzwerken

    Mündler, A., 4 Oct 2016, Lean Smart Maintenance: Konzepte, Instrumente und Anwendungen für eine effiziente und intelligente Instandhaltung. 1 ed. Köln, p. 193 203 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. Published

    Instandhaltungsoptimierung mittels Lean Smart Maintenance: Einführung des Lean Smart Maintenance Ansatzes

    Kinz, A. & Bernerstätter, R., Oct 2016, Lean Smart Maintenance: Konzepte, Instrumente und Anwendungen für eine effiziente und intelligente Instandhaltung. Köln, p. 61-100

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  38. Published

    Instandhaltungsoptimierung mittels Lean Smart Maintenance: Einführung des Lean Smart Maintenance

    Kinz, A. & Bernerstätter, R., Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    2. Zwischenbericht (FFG): Smart Maintenance

    Kinz, A. & Biedermann, H., 30 Sept 2016

    Research output: Book/Report › Commissioned report › Research

  40. Published

    EoPaMS: Evaluation of Production and Manufacturing Strategies

    Kapeller, J., 29 Sept 2016.

    Research output: Contribution to conference › Paper › peer-review

  41. Published

    Optimierung der Instandhaltungsstrategie durch datenanalytische Risikoklassifikation und Störungsprognose

    Biedermann, H., 9 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Optimierung der Instandhaltungsstrategie durch datenanalytische Risikoklassifikation und Störungsprognose

    Biedermann, H., 8 Sept 2016, Megatrend Digitalisierung: Potenziale der Arbeits- und Betriebsorganisation. Schlick, C. M. (ed.). Berlin: GITO Verlag, p. 71-88

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. Published

    Holistic Life Cycle Perspectives: Learnings from Life Cycle Assessments in Automotive and Energy Industries

    Tschiggerl, K. & Topic, M., 31 Aug 2016.

    Research output: Contribution to conference › Paper › peer-review

  44. Published

    Holistic Life Cycle Perspectives: Learnings from Life Cycle Assessments in Automotive and Energy Industries

    Tschiggerl, K., 14 Jul 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  45. Published

    Foundry products and their added value in life cycle assessments

    Topic, M., Tschiggerl, K., Rauter, M., Doschek, K., Biedermann, H. & Raupenstrauch, H., 4 Jul 2016, In: Livarski vestnik. 63.2016, 2, p. 60-80 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    EoPaMS- Evaluation of Production and Manufacturing Strategies: 9th International Doctoral Students Workshop on Logistics-Conference Proceedings

    Kapeller, J., 22 Jun 2016, 9th International Doctoral Students Workshop on Logistics, June 22, 2016, Magdeburg . Schenk, M. (ed.). 104 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Technischer Bericht über Verschleißarten (FFG): Smart Maintenance

    Jungwirth, J., 6 Jun 2016

    Research output: Book/Report › Commissioned report › Research

  48. Published

    LEAN SMART MAINTENANCE: EFFICIENT AND EFFECTIVE ASSET MANAGEMENT FOR SMART FACTORIES

    Kinz, A., 1 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  49. Published

    Participatory Development of a Performance Measurement and Management System

    Kleindienst, B. & Biedermann, H., 1 Jun 2016, MOTSP 2016: 8th International Scientific Conference - Management of Technology Step to Sustainable Production. Cosic, P., Baric, G., Dukic, G. & Lesar, M. (eds.). Zagreb, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Participatory Development of a Performance Measurement and Management System

    Kleindienst, B. & Biedermann, H., 1 Jun 2016, p. 1-8. 8 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    LEAN SMART MAINTENANCE: EFFICIENT AND EFFECTIVE ASSET MANAGEMENT FOR SMART FACTORIES

    Kinz, A., Bernerstätter, R. & Biedermann, H., Jun 2016, MOTSP 2016: 8th International Scientific Conference - Management of Technology Step to Sustainable Production.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    voestalpine Weichensysteme: Instandhaltungsweiterentwicklung

    Kosar, G. & Biedermann, H., Jun 2016

    Research output: Book/Report › Commissioned report › Research

Previous 1...6 7 8 9 10 11 12 13 ...28 Next
View graph of relations

Contact information

Peter-Tunner-Straße 25/III, 8700 Leoben
  • Main phone number: +43 (0) 3842 402 6001