Chair of Polymer Processing (350)

Organisational unit: Chair

701 - 800 out of 946Page size: 100

Research output

  1. 2010
  2. Published

    Determination of the elongational viscosity of polymer nanocomposites using different measurement methods

    Mattausch, H., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 149-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Determination of x-ray elastic constants and their applications to characterize microstresses in polypropylene nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M. & Laske, S., 2010, Book of Abstracts. p. 54-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Effect of the mixture composition on shear and extensional rheology of polyethylenterephthalate and acrylonitrilbutadienstyren nanocomposites

    Kracalik, M., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 21-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Einfluss des Verarbeitungsprozesses auf physikalische Eigenschaften von Nanocomposites

    Meister, S., 2010

    Research output: Thesis › Master's Thesis

  6. Published

    Ein innovativer systematischer Ansatz für die beschleunigte Produktentwicklung von komplexen Spritzgießteilen

    Friesenbichler, W., Brunnthaler, M., Altendorfer, F. & Bürtlmair, H., 2010, In: Österreichische Kunststoff-Zeitschrift. p. 10-13

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Elongational and shear flow in polymer-clay nanocomposites measured by on-line extensional and off-line shear rheometry

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2010, Book of Abstracts of Annual European Rheology Conference. p. 26-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Ermittlung der mittleren Molmasse und Molmassenverteilung von ausgewählten Polyolefinen mit Hilfe eines Rotationsviskosimeters

    Plank, M., 2010, 87 p.

    Research output: Thesis › Master's Thesis

  9. Published

    Ermittlung der Transition-Temperature bei verschiedenen Kühlraten und deren Einfluss auf die Vorhersage von Schwindung und Verzug in der Spritzgusssimulation

    Knapp, G., 2010

    Research output: Thesis › Master's Thesis

  10. Published

    Erstellen eines Prüfprogramms für Masterbatch-Trägerpolymere

    Geißler, B., 2010

    Research output: Thesis › Master's Thesis

  11. Published

    Evaluierung moderner Herstellungsmethoden für Kunststoffzähne

    Rettenwander, T., 2010

    Research output: Thesis › Master's Thesis

  12. Published

    Experimentelle und numerische Untersuchungen des Einflusses von Spritzgieß-Parametern auf Bauteildimensionen unter Verwendung von zwei unterschiedlichen optischen Messsystemen

    Müller, F., 2010

    Research output: Thesis › Master's Thesis

  13. Published

    Experimentelle und simulationstechnische Evaluierung eines Qualitätsregelkonzeptes für das Spritzgießverfahren

    Kipperer, M., 2010

    Research output: Thesis › Master's Thesis

  14. Published

    Extrusion am IKV-Leoben, Ausgewählte Projekte aus der aktuellen Forschung

    Holzer, C., Laske, S., Fertschej, A. & Schuschnigg, S., 2010, Extrusionstechnik 2010 - Hochleistungsextrusion und Betriebskostenoptimierung. p. 81-100

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Hochglanzoberflächen beim Spritzgießen - Quantitative topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Hochglanzoberflächen beim Spritzgießen. Quantitive topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of Injection Molding Parameters and Aging on Geometry and Functionality of Plastic Targets for Mass Spectrometry

    Pöhl, A., 2010, 108 p.

    Research output: Thesis › Master's Thesis

  18. Published

    Influence of molecular structure on the extensional behaviour of polyethylene melts

    Duretek, I., Florian, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 130-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Influence of molecular structure on the extensional behaviour of polyethylene melts

    Duretek, I., Florian, M. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Influence of shear energy and residence time on physical and mechanical properties of polyethylene nanocomposites

    Witschnigg, A., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Influence of shear energy and residence time on physical and mechanical properties of polyethylene nanocomposites

    Witschnigg, A., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 150-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    In-line characterization of polypropylene nanocomposites using FIT-NIR

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M., Langecker, G. & Holzer, C., 2010, In: Journal of Applied Polymer Science. 117, p. 3047-3053

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    In-line Qualitätskontrolle mittels Nah-Infrarot Spektroskopie

    Witschnigg, A., Laske, S. & Holzer, C., 2010, Proceedings - Grenzen von Kunststoffen neu definiert - Errungenschaften im Bereich Metallersatz und Leichtbau. p. 1-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 111-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    INVESTIGATIONS OF ADHESION ON TWO-SHOT MOULDED PARTS

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Konischer Gleichläufer macht Druck

    Klammer, G., Holzer, C., Schuschnigg, S. & Selvasankar, R. K., 2010, In: Kunststoffe. p. 80-83

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Kunststoffverarbeitung - über Spritzguß und Extrusion hinaus

    Holzer, C., 2010, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 1-3

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Mathematical modelling of the flow behaviour in the pressure build-up zone of a conical co-rotating twin screw extruder

    Selvasankar, R. K., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Measurement of pressure dependent viscosity and its influence on injection molding simulation

    Friesenbichler, W., Rajganesh Jegadeesan, X., Lucyshyn, T., Filz, P. & Webelhaus, K., 2010, 4th International PMI Conference - Conference Proceedings. p. 215-219

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Nanotechnology as a New Approach for Material Recycling of PET Bottles

    Kracalik, M., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Nanotechnology as a New Approach for Material Recycling of PET Bottles

    Kracalik, M., Laske, S. & Holzer, C., 2010, Tagungsband zur 10. DepoTech-Konferenz. p. 617-620

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    New Insights into Characterization of Flow Properties of PP Based Wood Platic Composites

    Duretek, I., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Praxisnahe Viskositäten für die Simulation

    Friesenbichler, W., Duretek, I. & Rajganesh Jegadeesan, X., 2010, In: Kunststoffe. 3, p. 37-40

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Real-time characterization of polypropylene nanocomposites in a corotating twin screw extruder

    Laske, S., Witschnigg, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G. A., Langecker, G. & Holzer, C., 2010, Proceedings ANTEC 2010. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Simulation of the Heating of Sheets using IR-Radiation

    Fertschej, A., Langecker, G. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 114-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Simulation of the Heating of Sheets using IR-Radiation

    Fertschej, A., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Structural influence of layered silicates on mechanical properties in polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Laske, S. & Kracalik, M., 2010, proceedings of 14th intern.Conference Polymeric Materials. p. 195-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Theoretische und experimentelle Betrachtung eines kämmend konisch gleichlaufenden Doppelschneckenextruders

    Schuschnigg, S., Selvasankar, R. K. & Klammer, G., 2010, In: VLK-News. p. 16-17

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Theoretische Untersuchung der Einbettung von keramischen Komponenten in Leiterplatten

    Pletz, M., 2010

    Research output: Thesis › Master's Thesis

  41. Published

    Three dimensional modelling of flow in the pressure build-up zone of the new conical co-rotating twin screw extruder

    Selvasankar, R. K. & Schuschnigg, S., 2010, Book of Abstracts. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Untersuchungen zur Druck- und Temperaturabhängigkeit der Viskosität und der Wärmeleitfähigkeit von polymeren Werkstoffen

    Narnhofer, M., 2010

    Research output: Thesis › Master's Thesis

  43. Published

    Verarbeitung von Nanofüllstoffen mittels "Advanced Compounding"

    Mattausch, H., Laske, S. & Holzer, C., 2010, Proceedings - Grenzen von Kunststoffen neu definiert - Errungenschaften im Bereich Metallersatz und Leichtbau. p. 1-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Verbundhaftungsuntersuchungen an Mehrkomponentenspritzgussteilen

    Grieshofer, H., 2010

    Research output: Thesis › Master's Thesis

  45. Published

    Verfahrenstechnische Auslegung der Ausstoßzone eines konischen gleichlaufenden Doppelschneckenextruders

    Himmler, G., 2010

    Research output: Thesis › Master's Thesis

  46. Published

    Vergleichende Ökobilanzierung von polymerem und herkömmlichem Kopierpapier

    Katschnig, M., 2010

    Research output: Thesis › Master's Thesis

  47. Published

    Verwendung einer FT-NIR Anlage an einem Doppelschneckenextruder: Aufbau, Inbetriebnahme sowie Grundlagen der chemometrischen Modellierung

    Witschnigg, A., 2010

    Research output: Book/Report › Book › Research

  48. Published

    Virtual determination of a process window for injection moulding

    Lucyshyn, T., Kukla, C., Kipperer, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Virtuelle Prozessauslegung beim Expansionsspritzgießen

    Rajganesh Jegadeesan, X., Friesenbichler, W. & Steinbichler, G., 2010, In: Kunststoffe. p. 204-208

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Wood Plastic Composites: determination and comparison of the specific energy consumption for WPC compounding methods based on two state-of-the-art formulations

    Kahr, S., 2010, 84 p.

    Research output: Thesis › Master's Thesis

  51. 2009
  52. Published

    Abrasive wear measurements of various polyamide compounds under real-injection molding conditions

    Oláh, L. & Friesenbichler, W., 2009,

    PPS 2009 Programme & Abstracts

    .     p. 56-56

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, EuroNanoForum 2009 - Nanotechnology for Sustainable Economy - Proceedings. p. 222-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Advanced compounding: extrusion of polypropylene nanocomposites using the melt pump

    Kracalik, M., Laske, S., Gschweitl, M., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 113, p. 1422-1428

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Advanced Compounding of Polymer Nanocomposites by assembling a melt pump

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    Advanced Compounding of Polymer Nanocomposites using a Melt Pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 148-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Assessment of Material Properties during compounding of Polymer Nanocomposites using In-Line near Infrared Spectroscopy

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 150-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Aufbau und Inbetriebnahme einer FT-NIR Anlage an einem gleichlaufenden Doppelschneckenextruder

    Witschnigg, A., 2009

    Research output: Thesis › Diploma Thesis

  60. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W. & Windhager, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W., Windhager, W. & Meister, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  62. Published

    Berechnung von Extrusionsschnecken

    Schuschnigg, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. Published

    Biopolymer Paper for Laser Printing Applications

    Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P., Burkhalter, R. & Langecker, G., 2009, PPS-25 Program & Abstracts. p. 78-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Biopolymer Paper for Laser Printing Applications: 25th Annual Meeting of the Polymer Processing Society

    Langecker, G., Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P. & Burkhalter, R., 2009

    Research output: Non-textual form › Web publication/site › Research

  65. Published

    Calculation of Residual Stresses in the Insert Molding Process Using the Finite Element Method

    Kisslinger, T., Fischer, K., Lucyshyn, T. & Langecker, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  66. Published

    Characterization of the strain distribution around crack tips in unfilled and nanofilled polypropylene using in situ synchrotron small and wide angle scanning scattering techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, EPF'09 european polymer congress. p. 120-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Compoundieren

    Witschnigg, A., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. Published

    Conception, calculation and analysis of a crosshead with double-coathanger distributor for physically foamed polyethylenes

    Richling, M. W., 2009

    Research output: Thesis › Master's Thesis

  69. Published

    Demolding Forces and Coefficients of Friction in Injection Molding. A new Mold and first results

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2009, In: Purasuchikkusu-eji = Plastics age. 55, p. 87-94

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Demolding forces and coefficients of friction in injection molding. A new practical measurement apparatus

    Berger, G. & Friesenbichler, W., 2009, Proceedings of ANTEC 2009. p. 1699-1703

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, 2008 MRS Fall Meeting Symposium. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Einfluss der spezifischen Wärmekapazität auf die Verzugsberechnung in Moldflow Plastics Insight (MPI) und experimentelle Validierung

    Schlattinger, P., 2009

    Research output: Thesis › Master's Thesis

  73. Published

    Einsatz von Talkum und Zeolith in Kunststoff-Compounds

    Piontek, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Entformungskräfte beim Spritzgießen in Abhängigkeit von Oberflächenrauigkeit, Stahlwerkstoff, Vorzugsrichtung der Oberflächenstruktur, Beschichtung und Kunststofftyp

    Burgsteiner, M., 2009, 237 p.

    Research output: Thesis › Master's Thesis

  75. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 111, p. 2253-2259

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: VLK-News. 17. Jahrg., p. 6-8

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    EXINMOLD

    Lucyshyn, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    Expansion injection moulding

    Rajganesh Jegadeesan, X., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    Expansionsspritzgießverfahren

    Rajganesh Jegadeesan, X., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    Flachfolien Coextrusion

    Piontek, M., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    From micro to advanced compounding: the way for applications of polymer nanocomposites

    Kracalik, M., Laske, S. & Holzer, C., 2009, Conference Proceedings NanoCon 2009 1st Conference with international participation. p. 38-38

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    FT-NIR as a determination method for reinforcement of polymer nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 114, p. 2488-2496

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Heizzeitverkürzung für den Elastomerspritzguss mittels eines Heiz-Scher-Mischteiles

    Perko, L., 2009

    Research output: Thesis › Master's Thesis

  84. Published

    Improved quality with smart moulds

    Kukla, C., 2009, ICIT&MPT 2009 Conference Proceedings . p. 169-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Industrial Production of Polymer Nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2009, APT09 - Advandes in Plastics Technology - Abstracts of Papers. p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  87. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Influences of steel grade and surface roughness on demolding forces in injection molding

    Berger, G., Friesenbichler, W. & Perko, J., 2009, Proceedings TOOL09. p. 25-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W., Burgsteiner, M. & Lorenz, B., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W. & Burgsteiner, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  93. Published

    In-line characterization and quality control of PP nanocomposites using FT-NIR spectroscopy

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    In-line quality control of polymer nanocomposites using near-infrared spectroscopy

    Laske, S., Witschnig, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Langecker, G. R. & Holzer, C., 2009, NANOCON 2009 - 1st International Conference, Conference Proceedings. p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    "In-line" quality control of polymer nanocomposites using near-infrared spectroskopy

    Laske, S., Kracalik, M. & Holzer, C., 2009, Conference Proceedings NanoCon 2009 1st Conference with international participation. p. 38-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Intelligente Hochleistungsmesstechnik

    Gallaun, U., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Lösungskompetenz unter einem Dach

    Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  98. Published

    Measurement of pressure dependent viscosity and its influence on injection moulding simulation

    Holzer, C., Lucyshyn, T., Friesenbichler, W. & Duretek, I., 2009,

    Programme & Abstracts of PPS 2009

    .     p. 153-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Messprinzipien von NIR und Rheotens

    Witschnigg, A., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  100. Published

    Messung von pvT-Daten bei prozessnahen Abkühlraten und deren Einfluss auf die Simulation von Schwindung und Verzug mit Moldflow Plastics Insight

    Lucyshyn, T., 2009

    Research output: Thesis › Doctoral Thesis

  101. Published

    Nanostructuring of surfaces for new functionalities

    Holzer, C., Gobrecht, J., Solak, H. H., Altana, C. & Hofmann, C., 2009, Vortrag und Proceedings zum 7th International Nanotechnology Symposium. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    New Rheological Injection Mould to Measure Pressure Dependent Viscosity in High Shear Rate Range

    Friesenbichler, W., Rajganesh Jegadeesan, X., Duretek, I. & Ramesh Kumar, S., 2009,

    PPS-25 Program & Abstracts

    .     p. 185-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...4 5 6 7 8 9 10 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501