Chair of Physical Metallurgy (420)

Organisational unit: Chair

501 - 600 out of 2,174Page size: 100

Research output

  1. 2018
  2. Published

    Scanning electron microscope: An essential equipment of failure analysis

    Panzenböck, M., Freitag, C., Hawranek, G., Mendez Martin, F. & Rashkova, B., 2018.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Spherical nanoindentation as an efficient tool to assess thermo-mechanical behavior of nanoporous Au

    Leitner, A., Maier-Kiener, V. & Kiener, D., 2018.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Strain-induced martensitic transformation in a Co-Cr-W-Mo alloy probed by nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2018, Proceedings of the International Conference on Martensitic Transformations. p. 247-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Surface energy of nanoparticles - influence of particle size and structures

    Vollath, D., Fischer, F.-D. & Holec, D., 2018, In: Beilstein journal of nanotechnology (Online-Ressource). 2018, 9, p. 2265-2276 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Synchrotron X-rays in the development of multi-phase intermetallic TiAl alloys

    Erdely, P., Staron, P., Stark, A., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  8. Published

    The effect of cryogenic conditions during mechanical alloying on an oxide dispersion strengthened steel

    Kusztrits, F., 2018

    Research output: Thesis › Master's Thesis

  9. Published

    Thermodynamische Gleichgewichts- und Ungleichgewichtsstudien im System TiAl

    Werner, R. E., 2018

    Research output: Thesis › Doctoral Thesis

  10. Published

    Untersuchung des Gefügeeinflusses auf die mechanischen Eigenschaften und Rollkontaktermüdung von AISI M50 (80MoCrV42-16) Kugellagerstahl

    Pritz, L. H., 2018

    Research output: Thesis › Doctoral Thesis

  11. Published

    Wie die Mikrostruktur von Hochleistungswerkstoffen deren mechanische Eigenschaften beeinflusst - eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, Fortschritte in der Metallographie : Sonderbände der Praktischen Metallographie. 1 ed. DGM, Vol. 52. p. 3-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. 2017
  13. Published

    Complementary High Spatial Resolution Methods in Materials Science and Engineering

    Paris, O., Lang, D., LI, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Popovski, G., Ganser, C., Teichert, C. & Clemens, H., 31 Dec 2017, In: Advanced engineering materials. 19.2017, 4, 22 p., 1600671.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Impact of Alloying on Stacking Fault Energies in γ-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 17 Nov 2017, In: Applied Sciences : open access journal. 7.2017, 11, 11 p., 1193.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Nov 2017, In: Acta materialia. 140.2017, November, p. 176-187 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Au55, a stable glassy cluster: results of ab initio calculations

    Vollath, D., Holec, D. & Fischer, F.-D., 25 Oct 2017, In: Beilstein journal of nanotechnology . 8.2017, p. 2221-2229 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

    Spörk, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 5 Oct 2017, In: Materials and Design. 131.2017, 5 October, p. 286-296 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques

    Vieweg, A., Povoden-Karadeniz, E., Ressel, G., Prevedel, P., Wojcik, T., Mendez Martin, F., Stark, A., Keckes, J. & Kozeschnik, E., 4 Oct 2017, (E-pub ahead of print) In: Materials and Design. 136.2017, 15 December, p. 214-222 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Interface-induced electronic structure toughening of nitride superlatices

    Rehák, P., Cerny, M. & Holec, D., 25 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 325.2017, September, p. 410-416 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    On grain boundary segregation in molybdenum materials

    Leitner, K., Felfer, P. J., Holec, D., Cairney, J. M., Knabl, W., Lorich, A., Clemens, H. & Primig, S., 11 Sept 2017, (E-pub ahead of print) In: Materials and Design. 135.2017, 5 December, p. 204-212 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Phase transformations in a β-solidifying γ-TiAl based alloy during rapid solidification

    Kastenhuber, M., Klein, T., Rashkova, B., Weißensteiner, I., Clemens, H. & Mayer, S., 1 Sept 2017, (E-pub ahead of print) In: Intermetallics. 91.2017, December, p. 100-109 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Crack path identification in a nanostructured pearlitic steel using atom probe tomography

    Leitner, T., Sackl, S., Völker, B., Riedl, H., Clemens, H., Pippan, R. & Hohenwarter, A., 24 Aug 2017, In: Scripta Materialia. 142.2018, 1 January, p. 66-69 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Femtosecond laser machining for characterization of local mechanical properties of biomaterials: a case study on wood

    Jakob, S., Pfeifenberger, M. J., Hohenwarter, A. & Pippan, R., 22 Aug 2017, (E-pub ahead of print) In: Science and Technology of Advanced Materials. 18.2017, 1, p. 574-583 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Magnetic properties of the CrMnFeCoNi high-entropy alloy

    Schneeweiss, O., Friák, M., Dudová, M., Holec, D., Šob, M., Kriegner, D., Holy, V., Beran, P., George, E. P., Neugebauer, J. & Dlouhy, A., 28 Jul 2017, In: Physical review : B, Condensed matter and materials physics. 96.2017, 15 May, 13 p., 014437.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Atom probe investigations on temper embrittlement and reversible temper embrittlement in S 690 steel weld metal

    Cerjak, H., Mendez Martin, F. & Domakova, M., 2 Jul 2017, In: Science and Technology of Welding and Joining. 23.2018, 2, p. 140-147 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, 14, p. 2658-2667 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

    Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 9 Jun 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 495-502 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Dynamic nanoindentation testing: is there an influence on a material’s hardness?

    Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Jun 2017, In: Materials Research Letters [Elektronische Ressource]. 5.2017, 7, p. 486-493 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Optical properties of TixSi1−xO2 solid solutions

    Ondračka, P., Holec, D., Nečas, D., Kedroňová, E., Elisabeth, S., Goullet, A. & Zajickkova, L., 30 May 2017, In: Physical review : B, Condensed matter and materials physics. 95.2017, 19, 10 p., 195163.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation

    Merle, B., Maier-Kiener, V. & Pharr, G. M., 21 May 2017, (E-pub ahead of print) In: Acta materialia. 134.2017, 1 August, p. 167-176 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Thermal stability and oxidation resistance of sputtered Ti-Al-Cr-N hard coatings

    Xu, Y. X., Riedl, H., Holec, D., Chen, L., Du, Y. & Mayrhofer, P. H., 20 May 2017, (E-pub ahead of print) In: Surface & coatings technology. 324.2017, 15 September, p. 48-56 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Tensorial elastic properties and stability of interface states associated with 5(210) grain boundaries in (Al,Si)

    Friák, M., Všianská, M., Holec, D., Zelený, M. & Šob, M., 2 May 2017, In: Science and Technology of Advanced Materials. 18.2017, 1, p. 273-282 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Structure and surface energy of Au55 nanoparticles: An ab initio study

    Holec, D., Fischer, F.-D. & Vollath, D., 6 Apr 2017, (E-pub ahead of print) In: Computational materials science. 134.2017, 15 June, p. 137-144 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess

    Zalesak, J., Holec, D., Matko, I., Petrenec, M., Sartory, B., Koutna, N., Daniel, R., Pitonak, R. & Keckes, J., 5 Apr 2017, (E-pub ahead of print) In: Acta materialia. 131.2017, 1 June, p. 391-399 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Superlattice-induced oscillations of interplanar distances and strain effects in the CrN/AlN system

    Zhang, Z., Gu, X., Holec, D., Bartosik, M., Mayrhofer, P. H. & Duan, H., 5 Apr 2017, In: Physical review : B, Condensed matter and materials physics. 95.2017, 15, 7 p., 155305.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Atom probe study of B2 order and A2 disorder of the FeCo matrix in an Fe-Co-Mo-alloy

    Turk, C., Leitner, H., Schemmel, I., Clemens, H. & Primig, S., 19 Mar 2017, (E-pub ahead of print) In: Micron. 98.2017, July, p. 24-33 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Source rock assessment from basin- to nano-scale: A case study from the Ukrainian Dniepr-Donets Basin

    Misch, D., Groß, D., Klaver, J., Schmatz, J., Sachsenhofer, R., Bechtel, A., Maier-Kiener, V., Kiener, D. & Mendez Martin, F., Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  39. Published

    Damage-Sequences of Mountain Anchors

    Freitag, C. & Panzenböck, M., 23 Feb 2017, In: Practical metallography = Praktische Metallographie. 54.2017, 1, p. 6-18 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures

    Klein, T., Usategui, L., Rashkova, B., Nó, M. L., San Juan, J. M., Clemens, H. & Mayer, S., 20 Feb 2017, (E-pub ahead of print) In: Acta materialia. 128.2017, 15 April, p. 440-450 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    The Use of Fluorine to Protect β-Solidifying γ-TiAl-Based Alloys against High-Temperature Oxidation

    Donchev, A., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 13 Feb 2017, In: MRS Advances. 2017, May, p. 1361-1367 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Robl, W., Zechner, J. & Mitterer, C., 9 Feb 2017, In: Journal of vacuum science & technology / B (JVST). 35.2017, 2, 11 p., 022201.

    Research output: Contribution to journal › Article › Research › peer-review

  44. E-pub ahead of print

    Impact of Mo on the ωo phase in β-solidifying TiAl alloys: An experimental and computational approach

    Klein, T., Schachermayer, M., Holec, D., Rashkova, B., Clemens, H. & Mayer, S., 1 Feb 2017, (E-pub ahead of print) In: Intermetallics. 85.2017, June, p. 26-33 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Atomistic modelling-based design of novel materials

    Holec, D., Zhou, L., Riedl, H., Koller, C., Mayrhofer, P. H., Friák, M., Šob, M., Körmann, F., Neugebauer, J., Music, D., Hartmann, M. A. & Fischer, F.-D., 17 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 19 p., 1600688.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Systematic ab initio investigation of the elastic modulus in quaternary transition metal nitride alloys and their coherent multilayers

    Wang, F., Holec, D., Odén, M., Mücklich, F., Abrikosov, I. A. & Tasnádi, F., 10 Jan 2017, In: Acta materialia. 127.2017, 1 April, p. 124-132 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel

    Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 7 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600658.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Industrial-scale sputter deposition of molybdenum oxide thin films: Microstructure evolution and properties

    Pachlhofer, J., Martin-Luengo, A. T., Franz, R., Franzke, E., Köstenbauer, H., Winkler, J., Bonanni, A. & Mitterer, C., 4 Jan 2017, In: Journal of vacuum science & technology / A (JVST). 35.2017, 2, 8 p., 021504.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Phase decomposition of a single-phase AlTiVNb high-entropy alloy after severe plastic deformation and annealing

    Schuh, B., Völker, B., Maier-Kiener, V., Todt, J., LI, J. & Hohenwarter, A., 3 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 10 p., 1600674.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Advanced intermatallic titanium aluminides - from fundamentals to application

    Mayer, S., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  51. Published

    Advanced Intermetallic TiAl Alloys

    Clemens, H. & Mayer, S., 2017, Materials Science Forum. 879 ed. Vol. 2017. p. 113-118 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  52. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  53. Published

    Atom probe study of prior austenite grain bounda-ries of zinc-coated press hardened steel

    Hofer, C., Kurz, T., Clemens, H. & Schnitzer, R., 2017, 2017 CHS2 Conference Proceedings. p. 383-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy and Nanoindentation Experiments

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2017.

    Research output: Contribution to conference › Poster › Research

  55. Published

    Charakterisierung und Studie der Umformbarkeit einer biokompatiblen Kobalt-Chrom-Legierung

    Schütz, A. S., 2017

    Research output: Thesis › Diploma Thesis

  56. Published

    Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmoelzer, T., Liss, K.-D., Staron, P., Stark, A., Schwaighofer, E., Lippmann, T., Clemens, H. & Mayer, S., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 395-424

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    Correlation of local mechanical properties and chemical compositin in a C-containing TiAl alloy studied by nanoindentation and atom probe tomography

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2017.

    Research output: Contribution to conference › Poster › Research

  58. Published

    Deformation mechanisms and texture evolution in a multi-phase TiAl alloy investigated by means of synchrotron radiation

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017.

    Research output: Contribution to conference › Poster › Research

  59. Published

    Deformation mechanisms during severe plastic deformation of a CueAg composite

    Kormout, K., Ghosh, P., Maier-Kiener, V. & Pippan, R., 2017, In: Journal of alloys and compounds. 695, p. 2285-2294 10 p.

    Research output: Contribution to journal › Article › Research

  60. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126.2017, March, p. 145-153 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Effect of microstructural instability on the creep resistance of an advanced intermetallic γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2017, In: Intermetallics. 80.2017, January, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Einfluss des Siliziumgehalts auf Konstitution und Gefüge von γ-TiAl Hochtemperaturlegierungen

    Wimler, D., 2017

    Research output: Thesis › Master's Thesis

  63. Published

    Einfluss von Cu auf die Gefügeausbildung von Super Duplex Stählen

    Gsellmann, M., 2017

    Research output: Thesis › Diploma Thesis

  64. Published

    Entwicklung einer γ-TiAl-Basislegierung für die Herstellung von Turboladerlaufrädern mittels Metallpulverspritzgießen

    Zechmann, N., 2017

    Research output: Thesis › Diploma Thesis

  65. Published

    Entwicklung intermetallischer TNM-Basislegierungen mit erhöhter Anwendungstemperatur

    Kastenhuber, M., 2017

    Research output: Thesis › Doctoral Thesis

  66. Published

    Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates

    Kaltenbrunner, T., Ecker, W., Antretter, T., Kaiser, R., Parteder, E. & Egger, R., 2017, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    First Principles Study of Water-Based Self-Assembled Nanobearing Effect in CrN/TiN Multilayer Coatings

    Holec, D., Paulitsch, J. & Mayrhofer, P. H., 2017, Solid State Phenomena. 258 ed. p. 373-378 6 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  68. Published

    Fliegende Zähne - Ablösung von Schneidsegmenten bei einer Trenneinrichtung

    Panzenböck, M. & Stergar, E., 2017, Praktische Metallographie Sonderband 51. p. 93-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Fundamental Approaches in Alloy and Microstructure Design for Intermetallic γ-TiAl Based Alloys

    Klein, T., 2017

    Research output: Thesis › Doctoral Thesis

  70. Published

    Influence of thermal processing on microstructure, strength and ductility of steels for cold heading applications

    Pfleger, B., 2017

    Research output: Thesis › Master's Thesis

  71. Published

    In situ Experiments with Synchrotron High-Energy X-rays and Neutrons

    Staron, P., Fischer, T., Lippmann, T., Stark, A., Daneshpour, S., Schnubel, D., Uhlmann, E., Gerstenberger, R., Camin, B., Reimers, W., Eidenberger, E., Clemens, H., Huber, N. & Schreyer, A., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 365-376

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  72. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2017, 19th Plansee Seminar. p. 21/1-21/10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Korngrenzenanalysen mittels Atomsondentomographie an gesintertem Molybdän

    Lutz, D., 2017

    Research output: Thesis › Master's Thesis

  74. Published

    Mechaniical and structural properties of CrN/AlN superlattices

    Holec, D., Friák, M., Bartosik, M. & Mayrhofer, P. H., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H., Mayer, S. & Scheu, C., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 3-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  76. Published

    Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 2017, In: Materials and Design. 115.2017, 5 February, p. 479-485 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications

    Staron, P., Schreyer, A., Clemens, H. & Mayer, S., 2017, 2 ed. Wiley-VCH . 462 p.

    Research output: Book/Report › Scholarly edition

  78. Published

    Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings

    Lasfargues, H., Glechner, T., Koller, C., Paneta, V., Primetzhofer, D., Kolozsvari, S., Holec, D., Riedl, H. & Mayrhofer, P. H., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 436-444 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Optimised structural models of solid slotions for tensorial properties

    Nöger, D. & Holec, D., 2017.

    Research output: Contribution to conference › Poster › Research

  80. Published

    Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 687-693 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Physical metallurgy of the molybdenum base alloy MHC

    Lang, D., Schatte, J., Knabl, W. & Clemens, H., 2017, 19th Plansee Seminar. p. 5/1-5/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Quantum-mechanical study of tensorial elastic and high-temperature thermodynamic properties of grain boundary states in superalloy-phase Ni3Al

    Friák, M., Vsianska, M., Holec, D. & Šob, M., 2017, In: IOP Conference Series: Materials Science and Engineering. 219.2017, 11 p., 012019.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Schwingfestigkeit eines Edelstahls in Wasser und wässrigem chloridhältigen Medium

    Ebner, A., 2017

    Research output: Thesis › Diploma Thesis

  84. Published

    Strength of WC-Co hard metals as a function of the effectively loaded volume

    Jonke, M., Klünsner, T., Supancic, P., Harrer, W., Glätzle, J., Barbist, R. & Ebner, R., 2017, In: International journal of refractory metals & hard materials. 64, p. 219-224 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    The effects of alloying elements on the microstructure of Al-rich TiAl alloys

    Wartbichler, R., 2017

    Research output: Thesis › Diploma Thesis

  86. Published

    Thermal expansion of Ti-Al-N and Cr-Al-N coatings

    Bartosik, M., Holec, D., Apel, D., Klaus, M., Genzel, C., Keckes, J., Arndt, M., Polcik, P., Koller, C. M. & Mayrhofer, P. H., 2017, In: Scripta materialia. 127.2017, 15 January, p. 182-185 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities

    Lang, D., Povoden-Karadeniz, E., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2017, In: Journal of alloys and compounds. 695.2017, 25 February, p. 372-381 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    The role of grain boundaries and segregation effects in molybdenum and its alloys

    Leitner, K., 2017

    Research output: Thesis › Doctoral Thesis

  89. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Untersuchungen zum Ausscheidungsverhalten von H-Karbiden in einer TiAl-Legierung

    Kirchheimer, K., 2017

    Research output: Thesis › Master's Thesis

  91. Published

    Vacancy-driven extended stability of cubic metastable Ta-Al-N and Nb-Al-N phases

    Pacher, F., Mayrhofer, P. H. & Holec, D., 2017, In: Surface & coatings technology. 326.2017, 15 October, Part A, p. 37-44 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Werkstoffcharakterisierung mittels hochauflösender dreidimensionaler Atomsondentomographie

    Mayer, S., Maier-Kiener, V., Mendez Martin, F., Panzenböck, M., Rashkova, B. & Clemens, H., 2017, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2017, p. 56-60 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. 2016
  94. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 29 Dec 2016.

    Research output: Contribution to conference › Presentation › Research

  95. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. E-pub ahead of print

    Extraction of flow behavior and hall–petch parameters using a nanoindentation multiple sharp tip approach

    Leitner, A., Maier-Kiener, V. & Kiener, D., 29 Nov 2016, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 9 p., 1600669.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Creep Behavior of a β-solidifying TiAl Alloy with Fully Lamellar Microstructure

    Burtscher, M., Klein, T., Mayer, S. & Clemens, H., 28 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  98. Published

    Atomistic pieces of the Materials Design jigsaw puzzle: From Schrödinger equation to thermal expansion

    Holec, D., 1 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  99. Published

    Improved ductility and toughness of an FeCoMo alloy

    Turk, C., Kellezi, G., Schemmel, I., Leitner, H. & Clemens, H., 5 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  100. E-pub ahead of print

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M. C., Mitterer, C. & Keckes, J., 2 Oct 2016, (E-pub ahead of print) In: Acta materialia. 122.2017, 1 January, p. 130-137 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Failure of Hot-Dip Galvanized Steel Parts : Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In: Practical metallography = Praktische Metallographie. 53.2016, 10, p. 641-651 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Advances in coating and thin film characterization

    Mitterer, C., 13 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

Previous 12 3 4 5 6 7 8 9 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben