Chair of Physical Metallurgy (420)

Organisational unit: Chair

301 - 400 out of 2,174Page size: 100

Research output

  1. 2021
  2. Published

    Correction to: Controlling the high temperature deformation behavior and thermal stability of ultra‑fine‑grained W by re alloying. Correction to: Journal of Materials Research https://doi.org/10.1557/s43578-020-00026-z

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., Feb 2021, In: Journal of Materials Research. 36, 3, p. 784-784 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Controlling the high temperature deformation behavior and thermal stability of ultra-fine-grained W by re alloying

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 25 Jan 2021, In: Journal of Materials Research. 2021, 12, p. 2408-2419 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    How the interface type manipulates the thermochemanical response of nanostructured metals: A case study on nickel: A case study on nickel

    Renk, O., Maier-Kiener, V., Motz, C., Eckert, J., Kiener, D. & Pippan, R., 24 Jan 2021, In: Materialia. 2021, 15, 13 p., 101020.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Laser powder bed fusion of an engineering intermetallic TiAl alloy

    Schimbäck, D., Braun, J., Leichtfried, G., Clemens, H. & Mayer, S., 22 Jan 2021, (E-pub ahead of print) In: Materials and Design. 201.2021, March, 11 p., 109506.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    High-throughput first-principles search for ceramic superlattices with improved ductility and fracture resistance

    Koutná, N., Brenner, A., Holec, D. & Mayrhofer, P. H., 4 Jan 2021, (E-pub ahead of print) In: Acta materialia. 206.2021, March, 10 p., 116615.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Fracture toughness trends of modulus-matched TiN/(Cr,Al)N thin film superlattices

    Buchinger, J., Wagner, A., Chen, Z., Zhang, Z., Holec, D., Mayrhofer, P. H. & Bartosik, M., 1 Jan 2021, In: Acta materialia. 202.2021, 1 January, p. 376-386 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Ab initio study of martensitic and ordering transformations in intermetallic TiAl-alloys

    Abdoshahi, N., 2021

    Research output: Thesis › Doctoral Thesis

  10. Published

    Advanced in-situ electrochemical nanoindentation for investigating hydrogen-materials interactions

    Ebner, A., 2021

    Research output: Thesis › Doctoral Thesis

  11. Published

    Advanced in situ electrochemical nanoindentation testing for understanding hydrogen-materials interactions

    Ebner, A., Clemens, H., Pippan, R. & Maier-Kiener, V., 2021.

    Research output: Contribution to conference › Poster › Research

  12. Published

    An additively manufactured titanium alloy in the focus of metallography

    Fleißner-Rieger, C., Pogrielz, T., Obersteiner, D., Pfeifer, T., Clemens, H. & Mayer, S., 2021, In: Practical metallography = Praktische Metallographie. 58, 1, p. 4-31 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    An understanding of hydrogen embrittlement in nickel grain boundaries from first principles

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 2021, In: Materials and Design. 2021, 212, p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Assessment of Various DFT-based Methods for Predicting Temperature Dependence of Elastic Constants

    Jechtl, T., 2021

    Research output: Thesis › Master's Thesis

  15. Published

    Bayesian optimization of hubbard u’s for investigating InGaN superlattices

    Popov, M., Spitaler, J., Romaner, L., Bedoya-Martínez, N. & Hammer, R., 2021, In: Electronic materials. 2021, 2, p. 370-381

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    CALPHAD assessment of the Ti-W system including experimental and ab-initio data

    Spitaler, T. & Romaner, L., 2021.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Damage Indicators for early Failure Detection under Cyclic Loading considering Creep Strain of WC-Co Hardmetals at 700 °C and 800 °C

    Maier, K., 2021

    Research output: Thesis › Doctoral Thesis

  18. Published

    Damage initiation in hard-coated hard metal substrates under normal and tangential loads at elevated temperature

    Walch, L., 2021

    Research output: Thesis › Master's Thesis

  19. Published

    Development of TiAl alloys on the demand of additive manufacturing and high-temperature application

    Wimler, D., 2021

    Research output: Thesis › Doctoral Thesis

  20. Published

    Effects of metallic Y and Ti addition on the dispersion and solubility behaviour of added Y2O3 in an ODS FeCrMnNiCo HEA during mechanical alloying

    Gruber, P., 2021

    Research output: Thesis › Master's Thesis

  21. Published

    Einfluss des Gefüges von explosionsverfestigtem Hadfield-Stahl auf die Ausbreitung akustischer Oberflächenwellen

    Feichtenschlager, L., 2021

    Research output: Thesis › Master's Thesis

  22. Published

    Entwicklung einer maßgeschneiderten Wärmebehandlungsroute für SLM gefertigte γ-TiAl-Hochtemperaturkomponenten

    Pürstl, F., 2021

    Research output: Thesis › Master's Thesis

  23. Published

    High Temperature Nanoindentation as a Versatile Tool to Examine Thermally Activated Deformation Mechanisms

    Kappacher, J., 2021

    Research output: Thesis › Doctoral Thesis

  24. Published

    How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 2021, In: Acta materialia. 2021, 216, 11 p., 117110.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Impact of Conditioning Processes on the Performance of Rotating Anodes

    Sommerauer, M., 2021

    Research output: Thesis › Master's Thesis

  26. Published

    Impact of the stacking sequence on the stability of transition-metal diborides

    Leiner, T., 2021

    Research output: Thesis › Master's Thesis

  27. Published

    In situ observation of the phase evolution during a physical simulation of the spark plasma sintering process of a γ-TiAl based alloy

    Musi, M., Galy, B., Monchoux, J.-P., Couret, A., Clemens, H. & Mayer, S., 2021.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Investigation into the mechanical character of grain boundaries in technically pure and micro-doped molybdenum

    Jakob, S., 2021

    Research output: Thesis › Doctoral Thesis

  29. Published

    Mechanical Constitution of Stable and Metastable Phases in Cu20Sn

    Lumper, L., 2021

    Research output: Thesis › Master's Thesis

  30. Published

    Mechanical Properties and Deformation Mechanisms of austenitic Nitrogen Steels under different Loading Conditions

    Hahn, C. E. K., 2021

    Research output: Thesis › Doctoral Thesis

  31. Published

    Phase constitution in an intermetallic Ti-37Al-10Nb alloy: what we can learn about the phase equilibria

    Rashkova, B., Brabetz, M., Mendez Martin, F., Distl, B., Hauschildt, K., Stein, F. & Clemens, H., 2021.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Simulation von Beschusstests an warmgewalzten Ti-6Al-4V Platten mit unterschiedlichen Mikrostrukturen

    Schwendenwein, P., 2021

    Research output: Thesis › Master's Thesis

  33. Published

    Stable and metastable phases in Cu20Sn investigated via high resolution methods

    Lumper, L., Kappacher, J., Clemens, H. & Maier-Kiener, V., 2021.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Study on Stabilization of α-case in Ti-6Al-4V

    Lukas, T., 2021

    Research output: Thesis › Master's Thesis

  35. Published

    Surface Damage of Rotating Anodes and the Impact on the X-ray Emission

    Siller, M., 2021

    Research output: Thesis › Doctoral Thesis

  36. Published

    The influence of 2 at.% to 4 at.% zirconium on phase equilibria in γ-based Ti–Al alloys

    Kardos, S., 2021

    Research output: Thesis › Master's Thesis

  37. Published

    Thermomechanical processing and high-temperature behavior of spark-plasma-sintered near-α Ti-8242NbS alloy

    Obersteiner, D., 2021

    Research output: Thesis › Master's Thesis

  38. Published

    Untersuchungen zur Produktivität im selektiven Laserschmelzprozess von Ti-6Al-4V Bauteilen

    Pogrielz, T., 2021

    Research output: Thesis › Master's Thesis

  39. 2020
  40. Published

    Exploring structural changes, manufacturing, joining, and repair of intermetallic γ-TiAl-based alloys: Recent progress enabled by in situ synchrotron X-Ray techniques

    Spörk-Erdely, P., Staron, P., Liu, J., Kashaev, N., Stark, A., Hauschildt, K., Maawad, E., Mayer, S. & Clemens, H., 19 Dec 2020, In: Advanced engineering materials. 23.2020, 11, 32 p., 2000947.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    METHOD FOR PRODUCING AN ARTICLE FROM A MARAGING STEEL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 17 Dec 2020, IPC No. C22C 38/ 50 A I, Patent No. US2020392593, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  42. Published

    Selective Laser Melting of a Near-alpha Ti6242S Alloy for High-Performance Automotive Parts

    Fleißner-Rieger, C., Pfeifer, T., Jörg, T., Kremmer, T., Brabetz, M., Clemens, H. & Mayer, S., 17 Dec 2020, In: Advanced engineering materials. 2021, p. 1-12 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy

    Burtscher, M., Alfreider, M., Schmuck, K., Clemens, H., Mayer, S. & Kiener, D., 11 Nov 2020, In: Journal of Materials Research. 2021, 12, p. 2465-2478 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    High-temperature phenomena in an advanced intermetallic nano-lamellar γ-TiAl-based alloy. Part I: Internal friction and atomic relaxation processes

    Usategui, L., Klein, T., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., Nov 2020, In: Acta materialia. 200, 200, p. 442-454 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation

    Siller, M., Schatte, J., Gerzoskovitz, S., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., Nov 2020, In: International journal of refractory metals & hard materials. 92.2020, November, 11 p., 105285.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    VERFAHREN ZUM HERSTELLEN EINES GEGENSTANDS AUS EINEM MARAGING-STAHL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 28 Oct 2020, IPC No. C22C 38/ 50 A I, Patent No. EP3728674, Priority date 19 Dec 2018, Priority No. WO2018EP85765

    Research output: Patent

  47. Published

    An Advanced TiAl Alloy for High-Performance Racing Applications

    Burtscher, M., Klein, T., Lindemann, J., Lehmann, O., Fellmann, H., Güther, V., Clemens, H. & Mayer, S., 22 Oct 2020, In: Materials. 13.2020, 21, p. 1-14 14 p., 4720.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Ab initio study of chemical disorder as an effective stabilizing mechanism of bcc-based TiAl(+Mo)

    Abdoshahi, N., Spörk-Erdely, P., Friák, M., Mayer, S., Šob, M. & Holec, D., 2 Oct 2020, In: Physical review materials . 24.020, 10, 14 p., 103604.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Addressing H-Material Interaction in Fast Diffusion Materials—A Feasibility Study on a Complex Phase Steel

    Massone, A., Manhard, A., Drexler, A., Posch, C., Ecker, W., Maier-Kiener, V. & Kiener, D., 2 Oct 2020, In: Materials. 13.2020, 20, p. 1-20 20 p., 4677.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper

    Wijaya, A., Eichinger, B., Chamasemani, F. F., Sartory, B., Hammer, R., Maier-Kiener, V., Kiener, D., Mischitz, M. & Brunner, R., 28 Sept 2020, (E-pub ahead of print) In: Materials and Design. 2021, 197, 11 p., 109188.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Structure, stress, and mechanical properties of Mo-Al-N thin films deposited by dc reactive magnetron cosputtering: Role of point defects

    Angay, F., Löfler, L., Tetard, F., Eyidi, D., Djemia, P., Holec, D. & Abadias, G., 1 Sept 2020, In: Journal of vacuum science & technology / A (JVST). 38.2020, 5, p. ´ 14 p., 053401.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    The Development and Characterization of High-Performance Materials: A Retrospective Article

    Clemens, H., Sept 2020, In: Practical metallography = Praktische Metallographie. 57.2020, 9, p. 614-649 36 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Novel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sintering

    Wimler, D., Lindemann, J., Gammer, C., Spörk-Erdely, P., Stark, A., Clemens, H. & Mayer, S., 5 Aug 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 792.2020, 5 August, 11 p., 139798.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Modelling of short-range ordering kinetics in dilute multicomponent substitutional solid solutions

    Svoboda, J., Holec, D., Popov, M., Zickler, G. & Fischer, F.-D., 2 Aug 2020, In: Philosophical magazine. 100.2020, 15, p. 1942-1961 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Mapping the mechanical properties in nitride coatings at the nanometer scale

    Zhang, Z., Chen, Z., Holec, D., Liebscher, C., Koutná, N., Bartosik, M., Zheng, Y. H., Dehm, G. & Mayrhofer, P. H., 1 Aug 2020, In: Acta materialia. 194.2020, 1 August, p. 343-353 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Strain aging characterization and physical modelling of over-aging in dual phase steel

    Soliman, M., Shan, Y. V., Mendez Martin, F., Kozeschnik, E. & Palkowski, H., 24 Jun 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 788.2020, 24 June, 13 p., 139595.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spörk, M., 18 Jun 2020, In: Additive Manufacturing. 35.2020, October, 16 p., 101384.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Fracture properties of thin film TiN at elevated temperatures

    Buchinger, J., Löfler, L., Ast, J., Wagner, A., Chen, Z., Michler, J., Zhang, Z., Mayrhofer, P. H., Holec, D. & Bartosik, M., 13 Jun 2020, In: Materials & design. 194.2020, September, p. 1-10 10 p., 108885.

    Research output: Contribution to journal › Article › Research › peer-review

  59. E-pub ahead of print

    The influence of alloying on Zn liquid metal embrittlement in steels

    Scheiber, D., Prabitz, K. M., Romaner, L. & Ecker, W., 9 Jun 2020, (E-pub ahead of print) In: Acta Materialia. 195.2020, 15 August, p. 750-760 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal-Matrix Composite

    Weglewski, W., Pitchai, P., Bochenek, K., Bolzon, G., Konetschnik, R., Sartory, B., Ebner, R., Kiener, D. & Basista, M., May 2020, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, May, p. 2377-2390 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Unravelling local environments in mixed TiO2–SiO2 thin films by XPS and ab initio calculations

    Ondračka, P., Nečas, D., Carette, M., Elisabeth, S., Holec, D., Granier, A., Goullet, A., Zajíčková, L. & Richard-Plouet, M., 30 Apr 2020, In: Applied surface science. 510.2020, 30 April, 11 p., 145056.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Hydrogen assisted intergranular cracking of alloy 725: The effect of boron and copper alloying

    Taji, I., Hajilou, T., Ebner, A., Scheiber, D., Karimi, S., Plesiutschnig, E., Ecker, W., Barnoush, A., Maier-Kiener, V., Johnsen, R. & Razumovskiy, V. I., 25 Apr 2020, In: Corrosion science. 203.2022, 15 July, 14 p., 110331.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Adsorption of H2 on Penta-Octa-Penta Graphene: Grand Canonical Monte Carlo Study

    Popov, M. N., Dengg, T., Gehringer, D. & Holec, D., 1 Apr 2020, In: C – journal of carbon research. 6.2020, 2, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Thermally activated deformation mechanisms and solid solution softening in W-Re alloys investigated via high temperature nanoindentation

    Kappacher, J., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 1 Apr 2020, In: Materials and Design. 189.2020, April, 6 p., 108499.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Interactions between a H2 Molecule and Carbon Nanostructures: A DFT Study

    Gehringer, D., Dengg, T., Popov, M. N. & Holec, D., 20 Mar 2020, In: C – journal of carbon research. 6.2020, 1, 15 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Unexpected softness of bilayer graphene and softening of A-A stacked graphene layers

    Sun, Y., Holec, D., Gehringer, D., Fenwick, O., Dunstan, D. J. & Humphreys, C. J., 20 Mar 2020, In: Physical review : B, Condensed matter and materials physics. 101.2020, 12, 7 p., 125421.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy

    Ebner, A. S., Brinckmann, S., Plesiutschnig, E., Clemens, H., Pippan, R. & Maier-Kiener, V., 16 Mar 2020, In: JOM. 72.2020, 5, p. 2020-2029 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    Insights into surface modification and erosion of multi-element arc cathodes using a novel multilayer cathode design

    Golizadeh Najafabadi, M., Anders, A., Mendez Martin, F., Kolozsvári, S. & Franz, R., 16 Mar 2020, (E-pub ahead of print) In: Journal of applied physics. 127.2020, 11, 10 p., 113301.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Surface Energy of Au Nanoparticles Depending on Their Size and Shape

    Holec, D., Dumitraschkewitz, P., Vollath, D. & Fischer, F.-D., 8 Mar 2020, In: Nanomaterials. 10.2020, 3, p. 1-15 15 p., 484.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    The Effect of Local Arrangement of Excess Mn on Phase Stability in Ni–Mn–Ga Martensite: An Ab Initio Study

    Zelený, M., Heczko, M., Janovec, J., Holec, D., Straka, L. & Heczko, O., 1 Mar 2020, In: Shape Memory and Superelasticity. 6.2020, 1, p. 35-44 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Inconel-Steel Multilayers by Liquid Dispersed Metal Powder Bed Fusion: Microstructure, Residual Stress and Property Gradients

    Bodner, S. C., van de Vorst, L. T. G., Zalesak, J., Todt, J., Keckes, J., Maier-Kiener, V., Sartory, B., Schell, N., Hooijmans, J. W., Saurwalt, J. J. & Keckes, J., Mar 2020, In: Additive Manufacturing. 32.2020, March, 101027.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Erosion and cathodic arc plasma of Nb–Al cathodes: composite versus intermetallic

    Zöhrer, S., Golizadeh Najafabadi, M., Koutná, N., Holec, D., Anders, A. & Franz, R., 20 Feb 2020, In: Plasma sources science & technology. 29.2020, 2, 14 p., 025022.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    The effect of chemical composition on the structure , chemistry and mechanical properties of magnetron sputtered W-B-C coatings : Modeling and experiments

    Mizaei, S., Alishahi, M., Souček, P., Ženíšek, J., Holec, D., Koutná, N., Buršíková, V., Stupavská, M., Zábranský, L., Burmeister, F., Blug, B., Czigány, Z., Balázsi, K., Mikšová, R. & Vašina, P., 15 Feb 2020, In: Surface & coatings technology. 383.2020, 15 February, 12 p., 125274.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Chemical bonding effects on the brittle-to-ductile transition in metallic glasses

    Moitzi, F., Şopu, D., Holec, D., Perera, D., Mousseau, N. & Eckert, J., 10 Feb 2020, In: Acta Materialia. 188.2020, 15 April, p. 273-281 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. E-pub ahead of print

    Heat Treatments and Critical Quenching Rates in Additively Manufactured Al–Si–Mg Alloys

    Hitzler, L., Hafenstein, S., Mendez Martin, F., Clemens, H., Sert, E., Öchsner, A., Merkel, M. & Werner, E., 5 Feb 2020, (E-pub ahead of print) In: Materials. 13.2020, 3, 17 p., 720.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Microstructural and Phase Analysis of an Additively Manufactured Intermetallic TiAl Alloy using Metallographic Techniques and High-Energy X-Rays

    Jop, M., Wartbichler, R., Staron, P., Maawad, E., Mayer, S. & Clemens, H., 4 Feb 2020, In: Practical metallography = Praktische Metallographie. 57.2020, 2, p. 84-95 12 p.

    Research output: Contribution to journal › Article › Research

  77. Published

    Ab initio calculations of alloying impact on structural properties and stability of cementite

    Sakic, A., 2020

    Research output: Thesis › Master's Thesis

  78. Published

    Chemical changes of TiC particles in a tool steel matrix alloy during hot isostatic pressing

    Pörnbacher, J., 2020

    Research output: Thesis › Doctoral Thesis

  79. Published

    Development and characterization of new low-cost intermetallic titanium aluminide alloys for advanced environmental-friendly propulsion systems

    Jop, M., 2020

    Research output: Thesis › Master's Thesis

  80. Published

    Development of a high entropy alloy for high temperature applications

    Zeisl, S., 2020

    Research output: Thesis › Master's Thesis

  81. 2019
  82. E-pub ahead of print

    An Ab initio study of magnetism in disordered Fe-Al alloys with thermal antiphase boundaries

    Friák, M., Golian, M., Holec, D., Koutná, N. & Šob, M., 23 Dec 2019, (E-pub ahead of print) In: Nanomaterials. 10.2020, 1, 17 p., 44.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Microstructural characterization of molybdenum grain boundaries by micropillar compression testing and atom probe tomography

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 5 Dec 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 12, p. 776-786 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Electron beam melting of a β-solidifying intermetallic titanium aluminide alloy

    Wartbichler, R., Clemens, H. & Mayer, S., 1 Dec 2019, In: Advanced engineering materials. 21.2019, 12, 5 p., 1900800.

    Research output: Contribution to journal › Article › Research › peer-review

  85. E-pub ahead of print

    Impact of V , Hf and Si on oxidation processes in Ti – Al – N : Insights from ab initio molecular dynamics

    Guo, F., Holec, D., Wang, J. & Du, Y., 5 Nov 2019, (E-pub ahead of print) In: Surface & coatings technology. 381.2020, 15 January, 10 p., 125125.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    The creep behavior of a fully lamellar γ-TiAl based alloy

    Burtscher, M., Klein, T., Mayer, S., Clemens, H. & Fischer, F. D., 1 Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106611.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Assessment of ductile character in superhard Ta-C-N thin films

    Glechner, T., Hahn, R., Wojcik, T., Holec, D., Kolozsvari, S., Zaid, H., Kodambaka, S., Mayrhofer, P. H. & Riedl, H., 15 Oct 2019, In: Acta materialia. 179.2019, 15 October, p. 17-25 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

    Völker, B., Maier-Kiener, V., Werbach, K., Müller, T., Pilz, S., Calin, M., Eckert, J. & Hohenwarter, A., 5 Oct 2019, In: Materials and Design. 179.2019, 5 October, 11 p., 107864.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements

    Zenk, C., Gibson, J. S. K. L., Maier-Kiener, V., Neumeier, S., Göken, M. & Korte-Kerzel, S., 2 Oct 2019, In: Acta materialia. 181.2019, December, p. 385-398 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Accepted/In press

    Solid bitumen in shale reservoirs: a challenge in organic petrography and geochemistry

    Misch, D., Riedl, F., Vranjes-Wessely, S., Horsfield, B., Reischenbacher, D., Ziegs, V., Mendez Martin, F. & Sachsenhofer, R., Oct 2019, (Accepted/In press) New Directions in Geosciences for Unconventional Resources.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Metallography of Intermetallic Titanium Aluminides – the ( Additive ) Manufacturing Makes the Difference

    Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 27 Aug 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 9, p. 567-584 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites

    Maity, T., Prashanth, K. G., Janda, A., Kim, J. T., Spieckermann, F. & Eckert, J., 1 Aug 2019, In: Journal of Materials Research. 34.2019, 15, p. 2672-2682 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum

    Jakob, S., Leitner, A., Lorich, A., Eidenberger-Schober, M., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Jul 2019, In: Materials & design. 182.2019, 15 November, p. 1-9 9 p., 107998.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Petrographic and sorption-based characterization of bituminous organic matter in the Mandal Formation, Central Graben (Norway)

    Misch, D., Riedl, F., Liu, B., Horsfield, B., Ziegs, V., Mendez Martin, F., Vranjes-Wessely, S. & Sachsenhofer, R., 18 Jun 2019, In: International journal of coal geology. 211.2019, 1 July, 12 p., 103229.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: Insights from strain rate jump tests

    Xiao, Y., Maier-Kiener, V., Michler, J., Spolenak, R. & Wheeler, J. M., 7 Jun 2019, In: Materials and Design. 181.2019, November, 11 p., 107914 .

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Elasticity of phases in Fe-Al-Ti superalloys: impact of atomic order and anti-phase boundaries

    Friák, M., Bursikova, V., Pizurová, N., Pavlu, J., Jiraskova, Y., Homola, V., Miháliková, I., Slávik, A., Holec, D., Všianská, M., Koutna, N., Fikar, J., D., J., Šob, M. & Neugebauer, J., 1 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  97. Published

    Microstructural Evolution and Mechanical Properties of an Advanced γ-TiAl Based Alloy Processed by Spark Plasma Sintering

    Wimler, D., Lindemann, J., Clemens, H. & Mayer, S., 9 May 2019, In: Materials. 12.2019, 9, 12 p., 1523.

    Research output: Contribution to journal › Article › Research › peer-review

  98. E-pub ahead of print

    An ab initio study of vacancies in disordered magnetic systems: A Case Study of Fe-Rich Fe-Al Phases

    Miháliková, I., Friák, M., Koutná, N., Holec, D. & Šob, M., 2 May 2019, (E-pub ahead of print) In: Materials. 12.2019, 9, 16 p., 1430.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Correlating structural and mechanical properties of AlN / TiN superlattice films

    Koutná, N., Rehák, P., Chen, Z., Bartosik, M., Fallmann, M., Cerny, M., Zhang, Z., Friák, M., Šob, M., Mayrhofer, P. H. & Holec, D., 1 May 2019, In: Scripta materialia. 165.2019, May, p. 159-163 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Thermal Expansion and Other Thermodynamic Properties of α2-Ti3Al and γ-TiAl Intermetallic Phases from First Principles Methods

    Holec, D., Abdoshahi, N., Mayer, S. & Clemens, H., 19 Apr 2019, In: Materials. 12.2019, 8, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Experimental Chemistry and Structural Stability of AlNb3 Enabled by Antisite Defects Formation

    Koutná, N., Erdely, P., Zöhrer, S., Franz, R., Du, Y., Liu, S., Mayrhofer, P. H. & Holec, D., 3 Apr 2019, In: Materials. 12.2019, 7, p. 1-11 11 p., 1104.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite

    Eggbauer, A., Lukas, M., Ressel, G., Prevedel, P., Mendez Martin, F., Keckes, J., Stark, A. & Ebner, R., 22 Mar 2019, In: Journal of materials science. 54.2019, 12, p. 9197-9212 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben