Chair of Physical Metallurgy (420)

Organisational unit: Chair

1501 - 1600 out of 2,174Page size: 100

Research output

  1. 2008
  2. Published

    On the Formation of Ordered w-phase in High Nb Containing γ-TiAl Based Alloys”

    Stark, A., BARTELS, A., Clemens, H. & Schimansky, F.-P., 2008, In: Advanced engineering materials. 10, p. 929-934

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    On the influence of coating and oxidation on the mechanical properties of a gamma-TiAl based alloy

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008, In: Intermetallics. 16, p. 1206-1211

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    On the Infuence of Nb and C on the Phase Transition Temperatures in gamma-TiAl Based Alloys

    Chladil, H., Clemens, H., Wallgram, W., Kremmer, S., Bartels, A., Gerling, R. & Kozeschnik, E., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 169-177

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    On the overaging behaviour of tool steel X38CrMoV5-3

    Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, p. 148-152

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Österreichs erfolgreichste Jungwissenschaftler

    Mayrhofer, P. H., 2008, In: Kurier. Karriere, 26.01.2008, p. 2-2

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Oxidation and diffusion processes during annealing of AlCrVN hard coatings

    Franz, R., Neidhardt, J., Mitterer, C., Schaffer, B., Hutter, H., Kaindl, R., Sartory, B., Tessadri, R., Lechthaler, M. & Polcik, P., 2008, In: Journal of vacuum science & technology / A (JVST). A26, p. 302-308

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Oxidation and interdiffusion studies of (Cr1-xAlx)1-yYyN films on y-TiAI

    Rovere, F., Moser, M., Mayrhofer, P. H. & Braun, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Oxidation behavior of Ti-Al-Si-N and Ti-Al-B-N coatings

    Zechner, J., 2008

    Research output: Thesis › Diploma Thesis

  10. Published

    Oxidation behaviour of the y-TiAl based alloy Ti-45Al-8Nb coated with TiAlYN and CrAlYN thin films

    Braun, R., Müßener, D., Moser, M., Rovere, F., Mayrhofer, P. H. & Leyens, C., 2008, TMS. p. 289-296

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Oxidation behaviour of the γ-TiAl based alloy Ti-45Al-8Nb deposited with TiAlYN and CrAlYN

    Braun, R., Müßener, D., Moser, M., Rovere, F., Mayrhofer, P. H. & Leyens, C., 2008, Structural aluminides for elevated temperatures. p. 289-296

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Oxidation behaviour of TiAlYN and CrAlYN nanocomposite coatings deposited on y-TiAl alloy Ti-45Al-8Nb based alloy Ti-45Al-8Nb

    Braun, R., Müßener, D., Moser, M., Rovere, F., Mayrhofer, P. H. & Leyens, C., 2008, The Minerals, Metals & Materials Society, 137th annual meeting proceedings . TMS, p. 289-296

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Oxidation Resistance and Ductility of a Coated gamma-TiAl Based Alloy

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 268-272

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Physisorbed Films in Periodic Mesoporous Silica Studies by in-situ Small-Angle Diffraction using Synchroron Radiation

    Zickler, G., Jähnert, S., Wagermaier, W., Funari, S. S., Findenegg, G. H. & Paris, O., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Precipitates in a Fe-Co-Mo alloy characterized by complementary methods

    Eidenberger, E., Stergar, E., Leitner, H., Scheu, C., Staron, P. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 247-252

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Precipitation behaviour of an Fe-Co-Mo-alloy during non-isothermal ageing

    Leitner, H., Schober, M., Clemens, H., Caliskanoglu, D. & Danoix, F., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 367-374

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Ru alloyed TiAlN and CrAlN coatings prepared by cathodic arc evaporation

    Pohler, M., 2008

    Research output: Thesis › Diploma Thesis

  18. Published

    Sputtered TiN/Cu multilayers and nanocomposites: structure, stresses and tribological properties

    Hofer-Roblyek, A. M., 2008

    Research output: Thesis › Diploma Thesis

  19. Published

    Structural evolution of protective coatings for gamma-TiAl based alloys

    Moser, M., 2008, 165 p.

    Research output: Thesis › Doctoral Thesis

  20. Published

    Structure and mechanical properties of CrN/TiN multilayer coatings prepared by a combined HIPIMS/UBMS deposition technique

    Paulitsch, J., Mayrhofer, P. H., Münz, W.-D. & Schenkel, M., 2008, In: Thin solid films. 517, p. 1239-1244

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Structure and phase evolution of Cr-Al-N coatings during annealing

    Mayrhofer, P. H., Willmann, H. & Reiter, A. E., 2008, In: Surface & coatings technology. 202, p. 4935-4938

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Structure and thermal stability of arc evaporated (Ti0.33Al0.67)1-xSixN thin films

    Flink, A., Andersson, J. M., Alling, B., Daniel, R., Sjölen, J., Karlsson, L. & Hultmann, L., 2008, In: Thin solid films. 517, p. 714-721

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Structure-Property relations in ZrCN coatings for tribological applications

    Silva, E., Rebelo De Figueiredo, M., Galindo, R. E., Carvalho, S., Mendonca, J. P., Espinosa, A., Franz, R., Mitterer, C. & Oliveira, J. C., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Structure-property relations of arc-evaporated Al-Cr-Si-N coatings

    Soldan, J., Neidhardt, J., Sartory, B., Kaindl, R., Cerstvy, R., Mayrhofer, P. H., Tessadri, R., Polcik, P., Lechthaler, M. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3555-3562

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Synthesis and characterisation of sputtered hard coatings of Cr-N/MoSx

    Budna, K., Walter, C., Spicak, R. & Mitterer, C., 2008, In: Surface engineering. 24, p. 350-354

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Synthesis and characterization of Cr-B-N coatings deposited by reactive arc-evaporation

    Polychronopoulou, K., Neidhardt, J., Rebholz, C., Baker, M. A., O'Sullivan, M., Reiter, A., Gunnaes, A. E., Giannakopoulos, K. & Mitterer, C., 2008, In: Journal of materials research (JMR). 23, p. 3048-3055

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Synthesis-structure-property relations for Cr-B-N coatings sputter deposited reactively from a Cr-B target with 20 at% B

    Budna, K., Neidhardt, J., Mayrhofer, P. H. & Mitterer, C., 2008, In: Vacuum. 82, p. 771-776

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Synthesis-structure relations for reactive magnetron sputtered V2O5 films

    Fateh, N., Fontalvo, G., Cha, L., Klünsner, T., Hlawacek, G., Teichert, C. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 1551-1555

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Temperature dependence of residual stress gradients in shot-peened steel coated with CrN

    Daniel, R., Keckes, J., Kirchlechner, C., Maier, G., Martinschitz, K. J. & Mitterer, C., 2008, In: Materials Science Forum .

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Texture Formation in high-Nb Containing gamma-TiAl Alloys during Hot Rolling

    Stark, A., Bartels, A., Gosslar, D., Schimansky, F.-P., Gerling, R. & Clemens, H., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 197-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    The effect of deposition temperature on microstructure and properties of thermal CVD TiN coatings

    Wagner, J., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2008, In: International journal of refractory metals & hard materials. 26, p. 120-126

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    The effect of yttrium incorporation on the oxidation resistance of Cr-Al-N coatings

    Rovere, F., Mayrhofer, P. H., Reinholdt, A., Mayer, J. & Schneider, J. M., 2008, In: Surface & coatings technology. 202, p. 5870-5875

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    The influence of age-hardening on turning and milling performance of Ti–Al–N coated inserts

    Chen, L., Du, Y., Mayrhofer, P. H., Wang, S. Q. & Li, J., 2008, In: Surface & coatings technology. 202, p. 5158-5161

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Theoretical study of strain effects on elnes and electronic structure of AIgaN

    Holec, D., Petrov, M., Lymperakis, L., Humphreys, C. J. & Neugebauer, J., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Thermal- and Stress-induced Formation of Ordered omega-phase in Nb-rich gamma-TiAl Based Alloys

    Stark, A., Bartels, A., Schimansky, F.-P., Gerling, R. & Clemens, H., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 145-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Thermal decomposition routes of CrN hard coatings synthesized by reactive arc evaporation and magnetron sputtering

    Ernst, W., Neidhardt, J., Willmann, H., Sartory, B., Mayrhofer, P. H. & Mitterer, C., 2008, In: Thin solid films. 517, p. 568-574

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Thermal fatigue behaviour of hot-work tool steels: heat check nucleation and growth

    Ebner, R. & Marsoner, S., 2008, In: International journal of microstructure and materials properties (IJMMP). 3, p. 182-194

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Thermal stability and age hardening of metastable hard coatings

    Mayrhofer, P. H., 2008, Materials and Technology. p. 84-85

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Thermal stability and thermo-mechanical properties of magnetron sputtered Cr-Al-Y-N coatings

    Rovere, F. & Mayrhofer, P. H., 2008, In: Journal of vacuum science & technology / A (JVST). A26, p. 29-35

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Titanium doped CVD alumina coatings

    Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H.-P. & Kathrein, M., 2008, In: Surface & coatings technology. 203, p. 350-356

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-Ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Transmission electron microscopy of nanocomposite Cr-B-N thin films

    Hegedüs, E., Kovács, I., Pecz, B., Toth, L., Budna, K. & Mitterer, C., 2008, In: Vacuum. 82, p. 209-213

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Transmission electron microscopy studies and simulation of the indentation response of superelastic fullerenelike carbon nitride thin films

    Neidhardt, J., Walter, C., Molina-Aldareguia, J. M., Herrmann, M., Clegg, W. J. & Hultman, L., 2008, In: Journal of applied physics. 103, p. 123515-1-123515-8

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Tribological behavior of sputtered CrAlNbN hard coatings at elevated temperatures

    Fontalvo, G. & Mitterer, C., 2008, Proceedings of CIST 2008. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Tribological properties of reactive magnetron sputtered V2O5 and VN-V2O5 coatings

    Fateh, N., Fontalvo, G. & Mitterer, C., 2008, In: Tribology Letters. 30, p. 21-26

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Ultra hochfester Stahl und optimierte Wärmebehandlungen für Motorsportanwendungen

    Dipolt, C., 2008, 90 p.

    Research output: Thesis › Diploma Thesis

  47. Published

    Untersuchung und Verifizierung des quasibinären Zustandsdiagramms für Beta-erstarrende TNM-Legierung auf Basis von Ti-(41-45)Al-4Nb-1Mo-0,1B

    Böck, B., 2008, 104 p.

    Research output: Thesis › Diploma Thesis

  48. Published

    Zum Kurzzeitkriechverhalten von Warmarbeitsstählen

    Stergar, E., Panzenböck, M., Leitner, H., Wurmbauer, H., Scheu, C. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 342-346

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    δ-Phase characterization of superalloy allvac 718 PlusTM

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS 2008. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. 2007
  51. Published

    Legierung für Wälzlager

    Rabitsch, R. (Inventor), Peißl, S. K. (Inventor), Ebner, R. (Inventor) & Eglsäer, S. (Inventor), 15 Mar 2007

    Research output: Patent

  52. Published

    Legierung für Wälzlager

    Rabitsch, R. (Inventor), Peissl, S. (Inventor), Ebner, R. (Inventor) & Eglsäer, S. (Inventor), 15 Mar 2007

    Research output: Patent

  53. Published

    24Monthly-Monthly Activity Report”

    Mayrhofer, P. H. & Moser, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    53. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2007, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  55. Published

    Advanced Intermetallic-Based Alloys

    Wiezorek, J. (Co-editor), Fu, C. L. (Co-editor), Takeyama , M. (Co-editor), Morris, D. (Co-editor) & Clemens, H. (Co-editor), 2007, Warrendale, Pennsylvania : Materials Research Society : MRS. (Symposium Proceedings; vol. Volume 980)

    Research output: Book/Report › Book › Research

  56. Published

    Al-Cr-N thin film design for high temperature applications

    Willmann, H., 2007

    Research output: Thesis › Doctoral Thesis

  57. Published

    AlCrVN - Design of high-temperature low-friction coatings

    Franz, R., 2007, 134 p.

    Research output: Thesis › Doctoral Thesis

  58. Published

    Analyse von Bauteilen und Halbzeugen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Analyse von Korrosionsbeständigen hochlegierten Stählen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Analyse von Laserschweißnähten

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    A Study of Recrystallization and Phase Transitions in Intermetallic Titanium Aluminides by In-Situ High-Energy Diffraction

    Liss, K.-D., BARTELS, A., Clemens, H., Bystrzanowski, S., Stark, A., Buslaps, T., Schimansky, F.-P., Gerling, R. & Schreyer, A., 2007, In: Materials Science Forum . 539-543, p. 1519-1524

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Atomistische Untersuchungen von metastabilen Phasen

    Mayrhofer, P. H., 2007, In: FWF-Info. p. 3-5

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Beurteilung hochfester martensitischer Bleche

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. Published

    Beurteilung von Al-Ronden

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Beurteilung von Schrottteilen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Beurteilung von Zn-Schichten an Hochfesten Drähten

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Beurteilung von Zn-Schichten von feuerverzinkten Bauteilen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Beyond b-C3-N4-Fullerene-like carbon nitride: A promising coating material

    Neidhardt, J. & Hultman, L., 2007, In: Journal of vacuum science & technology / A (JVST). A 25, p. 633-644

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Bruchmechanische Beurteilung von Laserschweißungen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Bruchmechanische Untersuchungen an Flugzeuglegierungen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Characterisation of Residual Stresses using Neutron Diffraction and Finite Element Simulation

    Cihak, U., 2007

    Research output: Thesis › Doctoral Thesis

  72. Published

    Characterization of residual stresses in IN 718 turbine discs by neutron diffraction and finite element modeling

    Staron, P., Cihak, U., Stockinger, M. & Clemens, H., 2007, In: Journal of Neutron Research. 0, p. 185-192

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Chemical Vapor Deposition of Titanium Nitride based Hard Coatings

    Wagner, J., 2007

    Research output: Thesis › Doctoral Thesis

  74. Published

    Christian Doppler Laboratory for Advanced Hard Coatings - 4 Poster

    Rebelo De Figueiredo, M., Pohler, M., Tritremmel, C., Franz, R., Daniel, R. & Mitterer, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Comparison of Magnetron Sputtering and Arc Evaporation by Al-Cr-N hard coatings

    Tritremmel, C., 2007

    Research output: Thesis › Diploma Thesis

  76. Published

    Control of bonding and epitaxy at copper/sapphire interface

    Oh, S. H., Scheu, C., Wagner, T. & Rühle, M., 2007, In: Applied physics letters. 91, p. 141912-1-141912-3

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    CrN coatings deposited by a simultaneous HIPIMS/UBM sputtering process

    Paulitsch, J., Mayrhofer, P. H., Münz, W.-D. & Schenkel, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    CrN coatings deposited by a simultaneous HIPIMS/UBM sputtering process

    Paulitsch, J., Mayrhofer, P. H., Münz, W.-D. & Schenkel, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    Deliverable 3.2.1 : Results on mechanical properties as a function of temperature and time will be directly transferred to coaters IONBOND and HAUZER for coating process optimization.”

    Mayrhofer, P. H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Deliverable 6.4.2: “Phase stability of nitrides (TiAlN-Ag and similar)

    Mayrhofer, P. H. & Hultman, L., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Deliverable 6.4.5: Effect of additives on the phase stability in TiAlN+Y

    Mayrhofer, P. H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Development and characterization of a new near-alpha-titanium alloy for high performance applications

    Proprentner, D., 2007

    Research output: Thesis › Diploma Thesis

  83. Published

    „DSC Setaram Evo 2400“

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Editoral - Prof. Dr. phil. Dr.techn. e.h. Hellmut Fischmeister

    Clemens, H., Rühle, M. & Richard, S., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1040-1040

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Einfluss der Mikrostruktur auf die Bruchzähigkeit der Aluminiumknetlegierung 7X75

    Goldgruber, S., 2007

    Research output: Thesis › Diploma Thesis

  86. Published

    Einfluss der Pulverfraktion auf die mechanischen Eigenschaften von pulvermetallurgisch hergestelltem Schnellarbeitsstahl

    Winkler, H., 2007

    Research output: Thesis › Diploma Thesis

  87. Published

    Einfluss einer thermischen Vorbehandlung und von Mikrolegierungselementen auf die Eigenschaften von un- und niedriglegierten Stählen

    Hochfellner, R., 2007, 102 p.

    Research output: Thesis › Diploma Thesis

  88. Published

    Einfluss einer Tiefkühlbehandlung auf die mechanischen Eigenschaften von Werkzeugstählen

    Kellezi, G., 2007

    Research output: Thesis › Diploma Thesis

  89. Published

    Elastic Modulus of Cr2AlC Thin Films Probed by Nanoindentation

    Sigumonrong, D. P., Schneider, J. M., Music, D., Walter, C., Emmerlich, J., Iskandar, R., Mayer, J., Korte, S. & Clegg, W. J., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Elektronenmikrostrahlanalysen-2

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Elektronenstrahlmikroanalysen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Elektronenstrahlmikroanalysen-2

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Elektronenstrahlmikroanalysen an Al-Blechen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Elektronenstrahlmikroanalysen an AL-Blechen- 2

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  95. Published

    Elektronenstrahlmikroanalysen an Bauteilen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Elektronenstrahlmikroanalysen an Laserschweißungen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Elektronenstrahlmikroanalysen an metallographischen Schliffen

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Elektronenstrahlmikroanalysen an Splittern

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Elektronenstrahlmikrostrahlanalysen an Rohren für Wärmetauscher

    Panzenböck, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Endbericht - CD-Labor Advanced Hard Coatings

    Mitterer, C., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Entwicklung und Charakterisierung von hoch Niob-haltigen Gamma-Titanaluminid Legierungen

    Chladil, H. F., 2007

    Research output: Thesis › Doctoral Thesis

  102. Published

    Entwicklung von epitaktischen TiN, VN und TiN/VN Schichten

    Shen, J., 2007

    Research output: Thesis › Diploma Thesis

Previous 1...12 13 14 15 16 17 18 19 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben