Chair of Physical Metallurgy (420)

Organisational unit: Chair

1401 - 1500 out of 2,174Page size: 100

Research output

  1. 2009
  2. Published

    Structural properties of wurtzitelike ScGaN films grown by NH3-molecular beam epitaxy

    Moram, M. A., Zhang, Y., Joyce, T. B., Holec, D., Chalker, P. R., Mayrhofer, P. H., Kappers, M. J. & Humphreys, C. J., 2009, In: Journal of applied physics. 106, p. 1135331-1135336

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Structure and properties of low-friction TiAlCN coatings prepared by reative arc-evaporation

    Rebelo De Figueiredo, M., Fontalvo, G., Franz, R., Munnik, F., Polzer, C., Lechthaler, M. & Mitterer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Structure and tribological properties of arc-evaporated HfAIN hard coatings

    Franz, R., Lechthaler, M., Polzer, C. & Mitterer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Structure-Properties relationship of a PH 13-8 MO Maraging Steel

    Schnitzer, R., Zickler, G., Zinner, S. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 491-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Struktur - Eigenschaftsbeziehungen von Maraging-Stählen

    Schnitzer, R., Zinner, S. & Leitner, H., 2009, Forum für Metallurgie und Werktstofftechnik. p. 42-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Suitability of different nanocomposite concepts for self-lubricating hard coatings

    Budna, K. P., 2009

    Research output: Thesis › Doctoral Thesis

  8. Published

    Synthesis-Structure-Property Relations of TiAlN based Hard Coatings

    Pfeiler, M. J., 2009

    Research output: Thesis › Doctoral Thesis

  9. Published

    Technology and mechanical properties of advanced y-TiAl based alloys

    Wallgram, W., Schmölzer, T., Cha, L., Das, G., Güther, V. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1021-1029

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    The effect of boron doping on thermal CVD of alumina

    Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H.-P. & Kathrein, M., 2009, proc. 17th International Plansee Seminar. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    The effect of boron doping on thermal CVD of alumina

    Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H. P. & Kathrein, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    The effect of increasing V content on structure, mechanical and tribological properties of arc evaporated Ti-AI-V-N coatings

    Pfeiler, M., Kutschej, K., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2009, In: International journal of refractory metals & hard materials. 27, p. 502-506

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    The Effect of Surface Roughness on Nanoindentation of Hard Coatings: Simulation and Experiment

    Walter, C. & Mitterer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    The morphology of secondary-hardening carbides in a martensitic steel at the peak hardness by 3DFIM

    Akre, J., Danoix, F., Leitner, H. & Auger, P., 2009, In: Ultramicroscopy. 109, p. 518-523

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    The nanostructure wear and corrosion performance of arc-evaporated CrBxNy nanocomposite coatings

    Polychronopoulou, K., Baker, M. A., Rebholz, C., Neidhardt, J., O 'Sullivan, M., Reiter, A., Kanakis, K., Leyland, A., Matthews, A. & Mitterer, C., 2009, In: Surface & coatings technology. p. 246-255

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    The origin of stresses in magnetron sputtered thin films

    Daniel, R., Mitterer, C., Martinschitz, K. J. & Keckes, J., 2009, Proceedings of 4th International Conference on Surface, coatings and Nanostructured Materials. p. 44-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Thermal stability of high-speed steels as characterized by X-ray diffraction profile analysis

    Leitner, H. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1109-1113

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Thermal stability of sputtered Al2O3 coatings

    Edlmayr, V., Moser, M., Walter, C. & Mitterer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Three-dimensional atom probe investigations of Ti-Al-N thin films

    Rachbauer, R., Stergar, E., Massl, S., Moser, M. & Mayrhofer, P. H., 2009, In: Scripta materialia. 61, p. 725-728

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    TOF-SIMS depth profiling and element mapping on oxidized AlCrVN hard coatings

    Schnöller, J., Franz, R., Mitterer, C. & Hutter, H., 2009, In: Analytical and bioanalytical chemistry. p. 1857-1861

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1566-1573

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Tribological Behavior of Sputtered CrAINbH Hard Coatings at Elevated Temperatures

    Fontalvo, G. & Mitterer, C., 2009,

    Proceedings of CIST2008&ITS-IFToMM2008

    .     p. 703-704

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Triebwerke von morgen: effizient, leicht, leiste

    Clemens, H., 2009, Stoffe aus denen die Zukunft ist. p. 9-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Untersuchungen zur Eigenspannungs- und Verzugsentstehung von induktiv gefügten artfremden Verbunden

    Höggerl, K., Leitner, H. & Ebner, R., 2009, In: HTM - journal of heat treatment and materials . 5, p. 278-284

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Vergleich von Präparations- und Ätzmethoden für die licht- und elektronenmikroskopische Untersuchung von Duplex Stählen

    Ragger, K. & Panzenböck, M., 2009, Prakt. Met. Sonderband 41. p. 81-86

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Werkstoffe als Motor des Fortschritts

    Clemens, H., 2009, Stoffe aus denen die Zukunft ist. p. 15-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Werkstoffwissenschaft

    Clemens, H., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154 Jg., p. 342-345

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2008
  29. Published

    Characterization of δ-phase in superalloy Allvac 718Plus™

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G. A., Prantl, W. & Stockinger, M., Apr 2008, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 376-380 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Gleitschicht, Gleitelement und Verfahren zu ihrer Herstellung

    Mitterer, C. (Inventor), Maier, K. (Inventor) & Gassner, G. (Inventor), 27 Mar 2008

    Research output: Patent

  31. Published

    Structure, elastic properties and phase stability of Cr1–xAlxN

    Mayrhofer, P. H., Music, D., Reeswinkel, T., Fuß, H.-G. & Schneider, J. M., 14 Mar 2008, In: Acta materialia. 56.2008, 11, p. 2469-2475 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    54. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2008, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  33. Published

    A beta-stabilized gamma-TiAl Based Alloy for improved processing performance

    Clemens, H., Chladil, H., Wallgram, W., Böck, B., Kremmer, S., Otto, A., Güther, V. & Bartels, A., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 217-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Accurate Raman spectroscopy of diamond-like carbon films deposited by an anode layer source

    Kahn, M., Cekada, M., Berghauser, R., Waldhauser, W., Bauer, C., Mitterer, C. & Brandstätter, E., 2008, In: Diamond and related materials. 17, p. 1647-1651

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Arc evaporation of Ti-Al-Ta-N coatings: the effect of bias voltage and Ta on high-temperature tribological properties

    Pfeiler, M., Fontalvo, G., Wagner, J., Kutschej, K., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2008, In: Tribology Letters. 30, p. 91-97

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Assessment of lifetime calculation of forged IN718 aerospace components based on a mulit-parametric microstructural evaluation

    Stoschka, M., Stockinger, M., Leitner, H., Riedler, M. & Eichlseder, W., 2008, SUPERALLOYS 2008. p. 573-582

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. Published

    Characteristics of the tensile flow behavior of Nb-46Al-9Nb sheet material – analysis of thermally-activated processes of plastic deformation

    Bystrzanowski, S., BARTELS, A., Clemens, H. & Gerling, R., 2008, In: Intermetallics. 16, p. 717-726

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Characterization of beta-solidifying gamma-TiAl alloy variants using advanced in- and ex-situ investigation methods

    Drössler, L. M., 2008

    Research output: Thesis › Diploma Thesis

  39. Published

    Characterization of Phospholipid Bilayers on Ti-6Al-4V and Ti-6Al-7Nb

    Pressl, D., Teichert, C., Hlawacek, G., Clemens, H., Iliev, P. P., Schuster, A., Feyerabend, F. & Willumeit, R., 2008, In: Advanced engineering materials. 10, p. B47-B52

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Coating development for piston rings

    Bachmaier, A., 2008

    Research output: Thesis › Diploma Thesis

  41. Published

    Combination of complementary methods for precipitate analysis

    Stergar, E., Eidenberger, E., Staron, P. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Comparative microstructural investigations of Ti-Al-N thin films alloyed with Y or Nb

    Rachbauer, R., 2008

    Research output: Thesis › Diploma Thesis

  43. Published

    Correlation between carbon content and mechanical properties in ZrCN coatings for tribological applications

    Silva, E., Rebelo De Figueiredo, M., Franz, R., Galindo, R. E., Carvalho, S., Mitterer, C., Rebouta, L. & Mendonca, J. P., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    D1.3.2."Optimized recipe based on the investigated materials systems to the job-coaters for choosing elements and thermal processing scheme for a TiAlN-based coating that will exhibit age hardening with retained oxidation resistance"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Deliverable 1.7.5 "Selection of coatings showing enhanced thermal stability and hindered secondary phase transformation at 850°C compared to SoA TiN based coatings"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Deliverable 9.1.8 "Workshop on structure characterisation"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Deposition of Ti–Al–N coatings by thermal CVD

    Wagner, J., Edlmayr, V., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2008, In: International journal of refractory metals & hard materials. 26, p. 563-568

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Design of Novel ß-solidifying TiAl Alloys with Adjustable ß/B2-phase Fraction and Excellent Hot-Workability

    Clemens, H., Wallgram, W., Kremmer, S., Güther, V., Otto, A. & Bartels, A., 2008, In: Advanced engineering materials. 10, p. 707-713

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Diffraction-based Residual Stress Analysis Applied to Problems in the Aircraft Industry

    Staron, P., Cihak, U., Clemens, H., Stockinger, M., Bayraktar, F. S., Vaidya, V. V., Kocak, M. & Schreyer, A., 2008, Neutrons and Synchrotron Radiation in Engineering Materials Science from Fundamentals to Material and Component Characterization. p. 389-412

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  50. Published

    Directional Atomic Rearrangements during Transformations between the apha- and gamma-phases in TiAl”

    Liss, K.-D., Stark, A., BARTELS, A., Clemens, H., Buslaps, T., Phelan, D. & Yeoh, L., 2008, In: Advanced engineering materials. 10, p. 389-392

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Effect of nitrogen-incorporation on structure, properties and performance of magnetron sputtered CrB2

    Budna, K., Mayrhofer, P. H., Neidhardt, J., Hegedus, E., Kovacs, I., Toth, L., Pecz, B. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3088-3093

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Einfluss der Legierungselemente auf die bainitische Umwandlung von Warmarbeitsstählen

    Csanyi, T., 2008, 132 p.

    Research output: Thesis › Diploma Thesis

  53. Published

    Einfluss des Mikrogefüges auf die Maßänderung von HSS Legierungen während der Wärmebehandlung

    Primig, S., 2008

    Research output: Thesis › Diploma Thesis

  54. Published

    Einfluss von Chrom und Mangan auf die Bainitbildung in Dualphasenstählen

    Satzinger, K. L., 2008

    Research output: Thesis › Diploma Thesis

  55. Published

    Einsteins junge Erben

    Mayrhofer, P. H., 2008, In: News : Österreichs größtes Nachrichtenmagazin ; Politik, Geld, Szene, Leute . 03.04.2008, p. 72-76

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Epitaxial growth of Al-Cr-N thin films on MgO (111)

    Willmann, H., Beckers, M., Birch, J., Mayrhofer, P. H., Mitterer, C. & Hultman, L., 2008, In: Thin solid films. p. 598-602

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Experiment and simulation of the compositional evolution of Ti-B thin films by sputtering of a compound target

    Neidhardt, J., Mraz, S., Schneider, J. M., Strub, E., Bohne, W., Liedke, B., Möller, W. & Mitterer, C., 2008, In: Journal of applied physics. 104, p. 063304-1-063304-10

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Formation mechanisms of low-friction tribo-layers on arc-evaporated TiC1 xNx hard coatings

    Rebelo De Figueiredo, M., Neidhardt, J., Kaindl, R., Reiter, A. E., Tessadri, R. & Mitterer, C., 2008, In: Wear. 265, p. 525-532

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Fundamental investigations on stress engineering of sputtered hard coatings

    Köstenbauer, H., 2008, 113 p.

    Research output: Thesis › Doctoral Thesis

  60. Published

    Gefügeausbildung in der ersten Lage von austenitischen Plattierungen auf un- und niedrig-legierten Stählen

    Posch, G., Panzenböck, M., Tösch, J. & Pölzl, S., 2008, In: Practical metallography = Praktische Metallographie. p. 311-323

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Hardness evolution of Al-Cr-N coatings under thermal load

    Willmann, H., Mayrhofer, P. H., Hultman, L. & Mitterer, C., 2008, In: Journal of materials research (JMR). 23, p. 2880-2885

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Hochtemperaturbeschichtung von Ti1-xAlxN auf verschiedenen Schnellarbeitsstählen

    Weirather, T., 2008

    Research output: Thesis › Diploma Thesis

  63. Published

    In- and Ex-situ Investigation of the beta-phase in a Nb and Mo Containing gamma-TiAl Based Alloy

    Clemens, H., Chladil, H., Wallgram, W., Zickler, G., Gerling, R., Liss, K.-D., Kremmer, S., Güther, V. & Smarsly, W., 2008, In: Intermetallics. 16, p. 827-833

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Influence of aluminium nitride on the high-temperature ductility of continuous cast slabs

    Winkelhofer, F., Parteder, E., Clemens, H., Leitner, H., Spiradek-Hahn, K. & Kozeschnik, E., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 159-172

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Influence of bipolar pulsed DC magnetron sputtering on elemental composition and micro-structure of Ti-Al-Y-N thin films

    Moser, M., Mayrhofer, P. H., Székely, L., Sáfrán, G. & Barna, P. B., 2008, In: Surface & coatings technology. 203, p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Influence of C and Nb Concentration on the High Temperature Deformation Behaviour of Nb-rich Gamma-TiAl Alloys

    Stark, A., Bartels, A., Schimansky, F.-P., Gerling, R. & Clemens, H., 2008, Ti-2007 Science and Technology. p. 685-688

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Influence of different atmospheres on the thermal decomposition of Al-Cr-N coatings

    Mayrhofer, P. H., Willmann, H., Hultman, L. & Mitterer, C., 2008, In: Journal of physics / D, Applied physics. 41, p. 155316-155320

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    INFLUENCE OF OXIDATION PROTECTIVE COATINGS ON THE DUCTILITY OF A gamma-TiAl BASED ALLOY

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008,

    The Minerals, Metals & Materials Society, 137th annual meeting proceedings

    .     TMS, p. 305-313

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Influence of pulsed bias on CrN coatings prepared by reactive magnetron sputtering

    Grasser, S., 2008

    Research output: Thesis › Diploma Thesis

  70. Published

    Innovation aus & mit der Wissenschaft: Exzellenz und Kooperation

    Mayrhofer, P. H., 2008, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    In-situ Characterization of Phase Transformations and Microstructure Evolution in a gamma-TiAl Based Alloys

    Liss, K.-D., BARTELS, A., Clemens, H., Stark, A., Buslaps, T., Phelan, D. & Yeoh, L. A., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 137-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    In-situ high-temperature characterisation of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  73. Published

    In-situ high-temperature characterisation of phase transformations in intermetallic γ-TiAl alloys

    Zickler, G., Drössler, L., Clemens, H., Klaus-Dieter, L. & Hölzel, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    In-situ high-temperature characterization of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    In-situ High-Temperature SAXS Studies of the Precipitation Kinetics in a Fe-Co-Mo Alloy

    Zickler, G., Eidenberger, E., Stergar, E., Leitner, H., Clemens, H., Lippmann, T., Staron, P., Fischer, T., Schreyer, A. & Novak, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    In-situ Small-angle X-ray Scattering Study of Sorption in an Ordered Hierarchical Mesoporius Silica Material

    Zickler, G., Mascotto, S., Chuenchom, L., Timmann, A. & Smarsly, B., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    In-situ small-angle X-ray scattering study of the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy

    Zickler, G., Eidenberger, E., Leitner, H., Stergar, E., Clemens, H., Staron, P., Lippmann, T. & Schreyer, A., 2008, In: Materials characterization. 59, p. 1809-1813

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Intermetallische Werkstoffe für Anwendungen in Automobil- und Flugzeugtriebwerken

    Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 337-341

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Isothermal aging kinetics of NiAl precipitates in a secondary hardening steel

    Erlach, S., Siller, I., Leitner, H. & Clemens, H., 2008, In: International journal of microstructure and materials properties (IJMMP). 3, p. 373-382

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Kinetik der Sigma - Phasen - Ausscheidung in Fe - Cr - Legierungen für Interkonnektoren in SOFC - Brennstoffzellen

    Prohaska, M., 2008

    Research output: Thesis › Diploma Thesis

  81. Published

    Kurzzeitkriechverhalten eines Warmarbeitsstahls

    Wurmbauer, H., Scheu, C., Panzenböck, M., Stergar, E., Leitner, H., Clemens, H. & Caliskanoglu, Z. D., 2008, Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung. p. 251-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Local deformation behaviour of high-strength PM-tool steels

    Gruber, P., Jesner, G., Ebner, R. & Kolednik, O., 2008, New Developments on Metallurgy and Applications of High Strength Steels. Vol. 067. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Low-friction coatings based on lubricious vanadium oxides

    Fateh, N., 2008

    Research output: Thesis › Doctoral Thesis

  84. Published

    Low-friction mechanisms active for carbon-containing coatings: Ti-C-N as a model system

    Rebelo De Figueiredo, M., Neidhardt, J., Franz, R. & Mitterer, C., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 263-267

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Mechanical properties and deformation of CrN and Cr/CrN coatings during nanoindentation: Experiments and theoretical calculations

    Daniel, R., Herrmann, M., Richter, F. & Mitterer, C., 2008, 35th International Conference on Metallurgical Coatings and Thin Films. p. 109-109

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Micro- and bonding structure of arc-evaporated AlCrVN low-friction coatings

    Franz, R., Neidhardt, J., Sartory, B., Tessadri, R. & Mitterer, C., 2008, In: Thin solid films. 516, p. 6151-6157

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Micro and macroscale tribological behavior of epitaxial Ti3SiC2 thin films

    Emmerlich, J., Gassner, G., Eklund, P., Högberg, H. & Hultman, L., 2008, In: Wear. 264, p. 914-919

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Micro mechanic testing and Local Electrode Atom Probe Microscope (LEAP) measurements on oxide dispersed strengthened (ODS) alloys

    Stergar, E., Hosemann, P., Vieh, C., Greco, R. R., Cappiello, M. J. & Maloy, S. A., 2008, In: Transactions of the American Nuclear Society (ANS transactions). 98, p. 1123-1124

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Micro Mechanic Testing and Local Electrode Atom Probe Micrscope (LEAP) Measurements on Oxide Dispersed Strengthened (ODS) Alloys

    Hosemann, P., Stergar, E., Vieh, C., Greco, R. R., Leitner, H. & Maloy, S. A., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Microscopical and sub-microscopical characterization of a heavy plate made of a micro-alloyed HSLA steel

    Felfer, P., 2008, 187 p.

    Research output: Thesis › Diploma Thesis › peer-review

  91. Published

    Microstructural investigation of a Fe-Co-Mo alloy by means of SANS and atom probe analysis

    Schmölzer, T., 2008

    Research output: Thesis › Diploma Thesis

  92. Published

    Microstructure and corresponding tensile properties of As-cast, beta-solidifying, gamma-TiAl based TNM alloys

    Güther, V., Otto, A., Klose, J., Rothe, C., Clemens, H., Kachler, W., Winter, S. & Kremmer, S., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 249-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Microstructure and Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Microstructure and Mechanical Properties of Ti-45Al-5Nb + (0 - 0.5C) Sheets

    Gerling, R., Schimansky, F. P., Stark, A., BARTELS, A., Kestler, H., Cha, L., Scheu, C. & Clemens, H., 2008, In: Intermetallics. 16, p. 689-697

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H. & Scheu, C., 2008, Neutrons and Synchrotron Radiation in Engineering Materials Science from Fundamentals to Material and Component Characterization. p. 3-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  96. Published

    Milestone 1.3.1 "Improved wear protection (hardness >35GPa) for TiAlN or (Al,Cr,Y)N coatings"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Milestone 1.3.2 "Oxidation protection of γ-TiAl base alloys by nanocomposite coatings (dwell time > 1000h at >= 850°C)"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Milestone 1.3.3. "Oxidation protection of γ-TiAl base alloys by nanocomposite coatings (dwell time > 1000h at >= 850°C)"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Milestone 3.2.3 "Demonstration of a self-organization process for increased mechanical strength in the coatings after exposure to thermal load during service of a coated part (for the last advanced coatings)"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Near Conventional Forging of Titanium Aluminides

    Kremmer, S., Chladil, H., Clemens, H., Otto, A. & Güther, V., 2008, Ti-2007 Science and Technology. p. 989-992

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science

    Reimers, W. (Co-editor), Pyzalla, A. (Co-editor), Schreyer, A. (Co-editor) & Clemens, H. (Co-editor), 2008, Weinheim: Wiley-VCH .

    Research output: Book/Report › Book › Research

  102. Published

    Observation of the precipitation behaviour of Fe-25Co-15Mo by SANS and 3DAP

    Eidenberger, E., Stergar, E., Staron, P., Leitner, H. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...11 12 13 14 15 16 17 18 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben