Chair of Physical Metallurgy (420)

Organisational unit: Chair

1101 - 1200 out of 2,174Page size: 100

Research output

  1. 2012
  2. Published

    In situ study of the hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy: HASYLAB Annual Report

    Schwaighofer, E., Stark, A., Lottermoser, L., René, K., Clemens, H., Mayer, S. & Schell, N., 2012

    Research output: Non-textual form › Web publication/site › Research

  3. Published

    In situ synchrotron radiation study during hot compressive deformation of a novel gamma TiAl alloy

    Stark, A., Schwaighofer, E., Mayer, S., Lippmann, T., Lottermoser, L., Pyczak, F., Clemens, H. & Schreyer, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    In situ synchrotron study of B19 phase formation in an intermetallic gamma-TiAl alloy

    Schmölzer, T., Stark, A., Schwaighofer, E., Lippmann, T., Mayer, S. & Clemens, H., 2012, In: Advanced engineering materials. 14, p. 445-448

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Interaction of heat checks in aluminum pressure casting dies and their effect on fatigue life

    Raninger, P., Ecker, W., Antretter, T., Leindl, M. & Ebner, R., 2012, Key engineering materials. Vol. 488-489. p. 626-629 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. Published

    Interfacial coherency stress distribution in TiN/AlN bilayer and multilayer films studied by FEM analysis

    Chawla, V., Holec, D. & Mayrhofer, P. H., 2012, In: Computational materials science. 55, p. 211-216

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Kinetik der γ/α-Umwandlung niedriglegierter Stähle - Vergleich von Modellrechnungen und Versuchsergebnissen

    Werner, R., 2012

    Research output: Book/Report › Book › Research

  8. Published

    Mechanische Eigenschaften und Ermüdungsverhalten von Solarzellenverbindern

    Pedevilla, M., 2012

    Research output: Thesis › Diploma Thesis

  9. Published

    Micro- and nanostructure evolution in intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2012, Ti-2011 - Proceedings of the 12th World Conference on Titanium. p. 395-403

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Microstructural characterization of hot deformed Ti-6A1-4V

    Warchomicka, F., Poletti, C. & Stockinger, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 729-732 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Microstructural evolution and mechanical properties of a cast and heat-treated TiAl alloy

    Schwaighofer, E., Lindemann, J., Klose, J., Guether, V., Schloffer, M., Schmölzer, T., Clemens, H. & Mayer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Microstructure development and hardness of a powder metallurgical multi phase y-TiAl based alloy

    Schloffer, M., Iqbal, F., Gabrisch, H., Schwaighofer, E., Schimansky, F.-P., Mayer, S., Stark, A., Lippmann, T., Göken, M., Pyczak, F. & Clemens, H., 2012, In: Intermetallics. 22, p. 231-240

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Mikrostruktur und mechanische Eigenschaften der AerMet® 100 Legierung

    Gruber, M., 2012

    Research output: Thesis › Diploma Thesis

  14. Published

    Mikrostruktur und mechanische Eigenschaften einer intermetallischen gamma TiAl-Basislegierung für Leichtbauanwendungen: Forum für Metallurgie und Werkstofftechnik

    Schwaighofer, E., Mayer, S. & Clemens, H., 2012

    Research output: Non-textual form › Web publication/site › Research

  15. Published

    Neue Einsatz- und Vergütungsstähle für die Herstellung über eine Kaltbandroute

    Ploberger, S., 2012

    Research output: Thesis › Diploma Thesis

  16. Published

    Recovery and recrystallization behavior of technically pure molybdenum

    Primig, S., 2012, 138 p.

    Research output: Thesis › Doctoral Thesis

  17. Published

    Retained austenite decomposition and carbide formation during tempering a hot-work tool steel X38CrMoV5-1 studied by dilatometry and atom probe tomography

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4989-4998

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Sample Preparation by Metallography and Focused Ion Beam for Nanomechanical Testing

    Moser, G., Felber, H., Rashkova, B., Imrich, P. J., Kirchlechner, C., Grosinger, W., Motz, C., Dehm, G. & Kiener, D., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 343-355

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Schadensanalytik

    Panzenböck, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Static recrystallization of molybdenum after deformation below 0.5TM(K)

    Primig, S., Leitner, H., Knabl, W., Lorich, A. & Stickler, R., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4806-4818

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Surface energies of AlN allotropes from first principles

    Holec, D. & Mayrhofer, P. H., 2012, In: Scripta materialia. 67, p. 760-762

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Textural evolution during dynamic recovery and static recrystallization of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4794-4805

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    The effect of molybdenum on the phase transformation behavior of beta/gamma-TiAl alloys

    Mayer, S., Sailer, C., Lindemann, J., Lippmann, T., Takeyama, M., Staron, P. & Clemens, H., 2012, Ti-2011 - Proceedings of the 12th World Conference on Titanium. p. 1421-1424

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    The influence of aluminium on the hardening behaviour of high-speed steels

    Kellezi, G. & Leitner, H., 2012, Proceedings of the 9th International Tooling Conference. p. 273-280

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Theory-guided materials design of multi-phase Ti-Nb alloys with bone-matching elastic properties

    Friak, M., Art Counts, W., Ma, D., Sander, B., Holec, D., Raabe, D. & Neugebauer, J., 2012, In: Materials. 5, 10, p. 1853-1872

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Transmission electron microscopy of single and double aged 718plus superalloy

    Whitmore, L., Leitner, H., Povoden-Karadeniz, E., Radis, R. & Stockinger, M., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 413-423

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Trends in the elastic response of binary early transition metal nitrides

    Holec, D., Friak, M., Neugebauer, J. & Mayrhofer, P. H., 2012, In: Physical review : B, Condensed matter and materials physics. 85, p. 0641011-0641019

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2011
  29. Published

    Strain-induced effects on the electronic structure and N K-edge ELNES of wurtzite A1N and AlxGa1-xN

    Petrov, M., Holec, D., Lymperakis, L., Neugebauer, J. & Humphreys, C. J., 12 Dec 2011, In: Journal of physics / Conference series. 326, 1, 012016.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Methodological challenges in combining quantum-mechanical and continuum approaches for materials science applications

    Friák, M., Hickel, T., Grabowski, B., Lymperakis, L., Udyansky, A., Dick, A., Ma, D., Roters, F., Zhu, L.-F., Schlieter, A., Kühn, U., Ebrahimi, Z., Lebensohn, A., Holec, D., Eckert, J., Emmerich, H., Raabe, D. & Neugebauer, J., 27 Oct 2011, In: European Physical Journal Plus. 126.2011, 10, 22 p., 101.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr

    Warchomicka, F., Poletti, C. & Stockinger, M., 25 Oct 2011, In: Materials Science and Engineering A. 528, 28, p. 8277-8285 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    MATERIAL FOR A GAS TURBINE COMPONENT, METHOD FOR PRODUCING A GAS TURBINE COMPONENT AND GAS TURBINE COMPONENT

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 4 Aug 2011, IPC No. C22C 30/ 00 A I, Patent No. US2011189026, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  33. Published

    ガスタービン構成部品のための材料、ガスタービン構成部品の製造方法、及びガスタービン構成部品

    Clemens, H. (Inventor) & Kremmer, S. (Inventor), 20 Jan 2011, IPC No. C22F 1/ 00 A N, Patent No. JP2011502213, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  34. Published

    10. Tagung Gefüge und Bruch

    Panzenböck, M. (Co-editor), Danzer, R. (Co-editor) & Pohl, M. (Co-editor), 2011, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  35. Published

    57. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2011, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  36. Published

    Ab initio study of pressure stabilized NiTi allotropes: Pressure-induced transformations and hysteresis loops

    Holec, D., Friak, M., Dlouhy, A. & Neugebauer, J., 2011, In: Physical review : B, Condensed matter and materials physics. 84, p. 224119-1-224119-8

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    A Novel Preparation Method for Lean Duplex Steels

    Panzenböck, M., Ragger, K., Chladil, H. & Clemens, H., 2011,

    Proceedings in Microscopy & Microanalysis

    .     p. 1036-1037

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger, E., Schnitzer, R., Zickler, G., Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2011, In: Advanced engineering materials. p. 664-673

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Characterization of residual stresses in IN718 turbine discs by neutron diffraction and finite element modelling

    Staron, P., Cihak, U., Clemens, H., Stockinger, M. & Schreyer, A., 2011, Euro Superalloys 2010. Vol. 278. p. 102-107 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Contact modeling of CVD coatings for cutting tools

    Brettner, E., 2011, 60 p.

    Research output: Thesis › Diploma Thesis › peer-review

  41. Published

    Continuum modeling of van der Waals interactions between carbon onion layers

    Todt, M., Rammerstorfer, F. G., Fischer, F. D., Mayrhofer, P. H., Holec, D. & Hartmann, M., 2011, In: Carbon. 49, p. 1620-1627

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Critical Consideration of Precipitate Analysis of Fe-1 at.% Cu Using Atom Probe and Small-Angle Neutron Scattering

    Schober, M., Eidenberger, E., Staron, P. & Leitner, H., 2011, In: Microscopy and microanalysis. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Decomposition pathways in age hardening of Ti-Al-N films

    Rachbauer, R., Massl, S., Stergar, E., Holec, D., Kiener, D., Keckes, J., Patscheider, J., Stiefel, M., Leitner, H. & Mayrhofer, P. H., 2011, In: Journal of applied physics. 110, p. 023515-1-023515-10

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Deformation Mechanisms in Micron-Sized PST-TiAl Compression Samples: Experiment and Model

    Rester, M., Fischer, F. D., Kirchlechner, C., Schmölzer, T., Clemens, H. & Dehm, G., 2011, In: Acta materialia. 59, p. 3410-3421

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K.-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Effect of specimen size on the tensile strength of WC–Co hard metal

    Klünsner, T., Wurster, S., Supancic, P., Ebner, R., Jenko, M., Glätzle, J., Püschel, A. & Pippan, R., 2011, In: Acta materialia. 59, p. 4244-4252

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Eigenschaften von Lean-Duplex Stählen nach Auslagerung in kritischen Temperaturbereichen

    Ragger, K., Panzenböck, M. & Chladil, H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Einfluss der Austenitisierungstemperatur auf die mechanisch-technologischen Eigenschaften einer intermetallisch aushärtenden Fe-Co-Mo Legierung

    König, N., 2011

    Research output: Thesis › Diploma Thesis

  49. Published

    Einfluss der Schweißparameter auf das Ermüdungsverhalten hochfester Baustähle

    Horn, A., 2011, 73 p.

    Research output: Thesis › Diploma Thesis

  50. Published

    Einfluss der Wärmebehandlung auf die Mikrostruktur und Zähigkeit von DIN 1.2083 Kunststoffformenstählen

    Grojer, B., 2011, 94 p.

    Research output: Thesis › Diploma Thesis

  51. Published

    Einsatz des Umformdilatometers mit Zug-/Druckadapter zur Simulation von Warmumformprozessen

    Tertinek, U., 2011, 89 p.

    Research output: Thesis › Diploma Thesis

  52. Published

    Electronic origin of structure and mechanical properties in Y and Nb alloyed Ti-Al-N thin films

    Rachbauer, R., Holec, D., Lattemann, M., Hultman, L. & Mayrhofer, P. H., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 735-742

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Ermüdung geschweißter hochfester Stähle

    Horn, A., Panzenböck, M. & Posch, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Impact of Al on structure and mechanical properties of NbN and TaN

    Zhang, Z., 2011, 72 p.

    Research output: Thesis › Diploma Thesis › peer-review

  56. Published

    Influence of Zr on structure, mechanical and thermal properties of Ti-Al-N

    Chen, L., Holec, D., Du, Y. & Mayrhofer, P. H., 2011, In: Thin solid films. 519, p. 5503-5510

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    In situ diffraction experiments for the investigation of phase fractions and ordering temperatures in Ti-44 at% Al-(3-7) at% Mo alloys.

    Schmölzer, T., Mayer, S., Sailer, C., Haupt, F., Güther, V., Staron, P., Liss, K.-D. & Clemens, H., 2011, In: Advanced engineering materials. 13, p. 306-311

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    In situ Experiments with Synchrotron High-Energy X-Rays and Neutrons

    Staron, P., Fischer, T., Lippmann, T., Stark, A., Daneshpour, S., Schnubel, D., Uhlmann, E., Gerstenberger, R., Camin, B., Reimers, W., Eidenberger, E., Clemens, H., Huber, N. & Schreyer, A., 2011, In: Advanced engineering materials. p. 658-663

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    In-situ TEM heating study of the y lamellae formation inside the alpha2 matrix of a Ti-45Al-7.5Nb alloy

    Cha, L., Clemens, H., Dehm, G. & Zhang, Z., 2011, In: Advanced materials. 146-147, p. 1365-1368

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Intermetallisches Titanaluminid - Ein innovativer Leichtbauwerkstoff für Hochtemperaturanwendungen

    Clemens, H. & Mayer, S., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Intermetallische y-Titanaluminid-Basislegierungen aus metallographischer Sicht - eine Fortsetzung

    Clemens, H. & Mayer, S., 2011, In: Practical metallography = Praktische Metallographie. p. 64-100

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Investigation of Cu precipitation in bcc-Fe-Comparison of numerical analysis with experiment

    Warczok, P., Reith, D., Schober, M., Leitner, H., Podloucky, R. & Kozeschnik, E., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 709-716

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Investigation on vanadium containing zirconia coatings for high temperature sliding interfaces

    Jantschner, O., 2011, 57 p.

    Research output: Thesis › Diploma Thesis › peer-review

  64. Published

    Light-weight Intermetallic Titanium Aluminides - Status of Research and Development

    Clemens, H. & Smarsly, W., 2011, Euro Superalloys 2010 . p. 551-556 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Low temperature precipitation kinetics of niobium nitride platelets in Fe

    Deschamps, A., Danoix, F., De Geuser, F., Epicier, T., Leitner, H. & Perez, M., 2011, In: Materials letters. 65, p. 2265-2268

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Mechanical Properties and Fatigue behaviour of copper interconnect Ribbon

    Pedevilla, M., Panzenböck, M., Clemens, H. & Mitrovitz, N., 2011, Proceedings 26th European Photovoltaic Solar Energy Conference and Exhibition. p. 3547-3549

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Mechanical Spectroscopy in Advanced TiAl-Nb-Mo Alloys at High Temperature

    Simas, P., Schmölzer, T., No, M. L., Clemens, H. & Juan, J. S., 2011, Materials Research Society symposium proceedings Vol. 1295. Materials Research Society : MRS, p. 139-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Mechanisms controlling the artificial aging of Al-Mg-Si Alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Ebner, T. & Uggowitzer, P. J., 2011, In: Acta materialia. 59, p. 3352-3363

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Microstructural changes during annealing of LDX 2101 and SAF 2304 in the temperature range of 475 and 700 °C and their effects on the mechanical properties and corrosion behaviour

    Ghanimi, Y., Ragger, K., Panzenböck, M., Clemens, H. & Chladil, H., 2011,

    Proceedings of Stainless Steel World Conference & EXPO

    .     p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature

    Cha, L., Clemens, H. & Dehm, G., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 703-708

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    On phase equilibria and phase transformations in ß/y-TiAl alloys - a short review

    Mayer, S., Sailer, C., Schmölzer, T., Clemens, H., Lippmann, T., Staron, P., Güther, V. & Takeyama, M., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 438-442

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Phase Equilibria and Phase Transformations in Molybdenum-Containing TiAl Alloys

    Mayer, S., Sailer, C., Nakashima, H., Schmölzer, T., Lippmann, T., Staron, P., Liss, K.-D., Clemens, H. & Takeyama, M., 2011, Materials Research Society symposium proceedings Vol. 1295. Materials Research Society : MRS, p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Phase fraction evolution in a multi-phase intermetallic gamma-TiAl based alloy: HASYLAB Annual Report

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Clemens, H., Stark, A., Staron, P., Lippmann, T. & Mayer, S., 2011

    Research output: Non-textual form › Web publication/site › Research

  74. Published

    Phase stability and alloy-related trends in Ti-Al-N, Zr-Al-N and Hf-Al-N systems from first principles

    Holec, D., Rachbauer, R., Chen, L., Wang, L., Luef, D. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 206, p. 1698-1704

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Phase transition and ordering behavior of ternary Ti-Al-Mo alloys using in-situ neutron diffraction

    Kabra, S., Yan, K., Mayer, S., Schmölzer, T., Reid, M., Dippenaar, R., Clemens, H. & Liss, K.-D., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 697-702

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Physical metallurgy of corrosion resistant maraging steels

    Leitner, H., 2011

    Research output: Thesis › Habilitation thesis › peer-review

  77. Published

    Precipitation hardening of biodegradable Fe-Mn-Pd alloys

    Moszner, F., Sologubenko, A. S., Schinhammer, M., Lerchbacher, C., Hänzi, A. C., Leitner, H., Uggowitzer, P. J. & Löffler, J. F., 2011, In: Acta materialia. p. 981-991

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Quantitative Phasenanalyse und qualitative Gefügecharakterisierung mittels Lichtmikroskopie an einer intermetallischen TNM™-Legierung nach Umformung und Wärmebehandlung

    Pritz, L. H., 2011, 118 p.

    Research output: Thesis › Diploma Thesis

  79. Published

    SANS Study of Carbon Addition in Ti-45Al-5Nb

    Staron, P., Schimansky, F.-P., Scheu, C. & Clemens, H., 2011, Materials Research Society symposium proceedings Vol. 1295. Materials Research Society : MRS, p. 195-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In: Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis

    Primig, S. & Leitner, H., 2011, In: Thermochimica Acta. p. 111-117

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model

    Daniel, R., Holec, D., Bartosik, M., Keckes, J. & Mitterer, C., 2011, In: Acta materialia. 59, p. 6631-6645

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Strain-induced effects on the electronic structure and n K-edge ELNES of wurtzite AlN and AlxGa1-xN

    Petrov, M., Holec, D., Lymperakis, L., Neugebauer, J. & Humphreys, C. J., 2011, Proceeding of International Conference on Microscopy of Semiconducting Materials 2011. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Structure-Properties Relationship of a Stainless Maraging Steel

    Schnitzer, R., 2011, 125 p.

    Research output: Thesis › Doctoral Thesis

  85. Published

    The Characterisation of a Powder Metallurgically Manufactured TNMTM Titanium Aluminide Alloy Using Complimentary Quantitative Methods

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 594-604

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    The Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmölzer, T., Liss, K.-D., Peter, S., Mayer, S. & Clemens, H., 2011, In: Advanced engineering materials. p. 685-699

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Thermodynamic Description of Niobium-Rich Gamma-TiAl Alloys

    Liu, Y., Gamsjäger, E. & Clemens, H., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 692-696

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Totalversagen eines Regelventils

    Prinz, C. & Panzenböck, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Towards predictive modeling of near-edge structures in electron energy-loss spectra of AlN-based ternary alloys

    Holec, D., Rachbauer, R., Kiener, D., Cherns, P. D., Costa, P. M. F. J., McAleese, C., Mayrhofer, P. H. & Humphreys, C. J., 2011, In: Physical review : B, Condensed matter and materials physics. 83, p. 165122-1-165122-10

    Research output: Contribution to journal › Article › Research › peer-review

  90. 2010
  91. Published

    WERKSTOFF FÜR EIN GASTURBINENBAUTEIL, VERFAHREN ZUR HERSTELLUNG EINES GASTURBINENBAUTEILS SOWIE GASTURBINENBAUTEIL

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 15 Sept 2010, IPC No. C22F 1/ 18 A I, Patent No. EP2227571, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  92. Published

    Curvature-induced excess surface energy of fullerenes: Density functional theory and Monte Carlo simulations

    Holec, D., Hartmann, M. A., Fischer, F. D., Rammerstorfer, F. G., Mayrhofer, P. H. & Paris, O., 2 Jun 2010, In: Physical review : B, Condensed matter and materials physics. 81, 23, p. 2354031-23540310

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    3D-Atomsonde zur Charakterisierung von nanostrukturierten Werkstoffen

    Leitner, H., 2010, Handbuch der Nanoanalytik Steiermark 2010. p. 157-160

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  94. Published

    56. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2010, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  95. Published

    Abrasive and Adhesive Wear Behavior of Arc-Evaporated Al1-xCrxN Hard Coatings

    Reiter, A., Mitterer, C., Rebelo De Figueiredo, M. & Franz, R., 2010, In: Tribology Letters. p. 605-611

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    A critical consideration of magnetism and composition of (bcc) Cu precipitates in (bcc) Fe

    Schober, M., Eidenberger, E., Leitner, H., Staron, P., Reith, D. & Podloucky, R., 2010, In: Applied physics / A (Series A, Materials science & processing). p. 697-704

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Adsorption in Periodically Ordered Mesoporous Organosilica Materials Studied by in-situ Small-angle X-ray Scattering and Small-angle Neutron Scattering

    Mascotto, S., Wallacher, D., Kuschel, A., Polarz, S., Zickler, G., Timmann, A. & Smarsly, B., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  98. Published

    Advanced precipitation characterisation of Fe-alloys

    Schober, M., 2010

    Research output: Thesis › Doctoral Thesis

  99. Published

    Analyse und Simulation des Abschreckvorgangs für Flugzeug-Triebwerksbauteile

    Hasenhüttl, C. G., 2010

    Research output: Thesis › Diploma Thesis

  100. Published

    A Numerical study on the fatigue resistance of a coated tool steel

    Schöngrundner, R., Endler, S. B., Daniel, R., Ebner, R., Mitterer, C. & Kolednik, O., 2010, Proceedings of 18th European Conference of Fractue. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Atom probe specimen preparation and 3D interfacial study of Ti-Al-N thin films

    Rachbauer, R., Massl, S., Stergar, E., Felfer, P. & Mayrhofer, P. H., 2010, In: Surface & coatings technology. 204, p. 1811-1816

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Behaviour of a maraging steel under quasi-static and dynamic compressive loading

    Lach, E., Schnitzer, R., Leitner, H., Redjaimia, A. & Clemens, H., 2010, In: International journal of microstructure and materials properties (IJMMP). 5, p. 65-78

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Bestimmung und Validierung eines Materialmodells zur numerischen Simulation des Eigenspannungsabbaus in CrN-Schichten

    Essl, W., 2010

    Research output: Thesis › Diploma Thesis

Previous 1...8 9 10 11 12 13 14 15 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben