Chair of Metal Forming (560)

Organisational unit: Chair

501 - 731 out of 731Page size: 500

Research output

  1. 2008
  2. Published

    Vorformoptimierung für das Gesenkschmieden mittels numerischer Simulation

    Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 413-417

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Werkstoff- und verfahrenstechnische Optimierung bei der Herstellung hochfester Schrauben

    Buchmayr, B., Hatzenbichler, T., Kienreich, R. & Beyer, S., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 423-429

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Wirkung von Kühleisen im Sandguss auf Gefüge und mechanische Eigenschaften der Legierung EN AC-Al Si7Mg

    Pabel, T. & Schindelbacher, G., 2008, In: Gießerei-Rundschau. p. 153-157

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    XXVII. Verformungskundlichen Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2008, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  6. Published

    Zwischenbericht Dezember 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Zwischenbericht "Endlos Giess-Walzanlagen für Langprodukte" zum Projekt P056-01-09 (1.7-31.12.2007)

    Gelder, S., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Zwischenbericht Februar 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Zwischenbericht Juni 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Zwischenbericht September 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Воздействие комбинации холодного с теплым термическим упрочнением на качество литейного сплава AlSi9Cu3(Fe)(Zn) (Auswirkungen einer Kombination von Kalt- mit Warmauslagerung auf die mechanischen Eigenschaften der Druckgusslegierung AlSi9Cu3(Fe)(Zn))

    Pabel, T., Geier, G., Rockenschaub, H. & Hopfinger, M., 2008, In: Giesserei-Praxis. p. 36-44

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2007
  14. Published

    Mechanische Eigenschaften der Druckgusslegierung AlSi9Cu3(Fe) - eine Übersicht über die Aushärtemechanismen und die Steigerung der Eigenschaften mittels gezielter Warmauslagerung

    Rockenschaub, H., Pabel, T., Geier, G., Holzer, H. & Hopfinger, M., 5 Jun 2007

    Research output: Non-textual form › Web publication/site › Research

  15. Published

    Front end bending in plate rolling influenced by circumferential speed mismatch and geometry

    Philipp, M., Schwenzfeier, W., Fischer, F.-D., Wödlinger, R. & Fischer, C., 11 Jan 2007, In: Journal of materials processing technology. 184.2017, 1-3, p. 224-232 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Analyse von Herstellmöglichkeiten für hochfeste Nahtlosrohre

    Lackner, B. K., 2007

    Research output: Thesis › Diploma Thesis

  17. Published

    A numerical sensitivity study to determine the main influence parameters on the back-end defect

    Buchmayr, B., Hatzenbichler, T. & Umgeher, A., 2007, In: Journal of materials processing technology. 182, p. 73-78

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A Practical Approach to Preform Design for Different Materials

    Harrer, O.-K., Sommitsch, C., Rüf, G. & Buchmayr, B., 2007, ESAFORM Conference on Material Forming. AIP Press, p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Auswirkungen einer Kombination von Kalt- mit Warmauslagerung auf die mechanischen Eigenschaften der Druckgusslegierung Al Si9Cu3(Fe)(Zn)

    Pabel, T., Rockenschaub, H., Geier, G. F. & Hopfinger, M., 2007, In: Druckguss-Praxis. p. 33-41

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Charakterisierung unterschiedlicher Schmierstoffe hinsichtlich des Reibzahlverlaufes beim Schmieden von Aluminiumlegierungen

    Buchner, B., Maderthoner, G. & Buchmayr, B., 2007, XXVI. Verformungskundliches Kolloquium. p. 255-265

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Combined EBSD, FIB and TEM investigation of the crack behaviour of the nickel based alloy 80A

    Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Computertomographie bei Holz

    Pabel, T., Golser, M. & Neumueller, A., 2007, In: Holzforschung Austria. p. 8-9

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Computertomographie – Möglichkeiten, Erwartungen und Grenzen in der Praxis

    Geier, G., Pabel, T. & Schindelbacher, G., 2007, In: Giesserei. p. 34-41

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Computertomographie – Möglichkeiten, Erwartungen und Grenzen in der Praxis

    Geier, G., Pabel, T. & Schindelbacher, G., 2007, In: Gießerei-Rundschau. p. 82-86

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

    Sommitsch, C. & Buchmayr, B., 2007, In: Steel research international. 78, p. 740-744

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Crack behaviour of the Nickel based alloy 80A during hot forming

    Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Creep-fatigue of multi-part container during hot extrusion of copper – Simulation and experimental comparison

    Krumphals, F., Wlanis, T., Sommitsch, C. & Redl, C., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Description of a test-methodology for the formulation and selection of components of thread-molding oils

    Monetti, C., Novotny-Farkas, F., Hering, G., Buchner, B., Schiester, I. & Tonnerer, F., 2007, ECOTRIB 2007. Slovenian Scociety of tribology, p. 15-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Development of aluminium-clad steel sheet by roll-bonding for the automotive industry

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, 10th International ESAFORM Conference on Material Forming. p. 264-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Einfluss reduzierter Schmiedetemperaturen auf die Eigenschaften von AFP-Stählen

    Buchmayr, B. & Lehofer, H., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung". p. 53-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Einfluss von Schmiede- und Abkühlbedingungen auf das Gefüge und die Eigenschaften ausgewählter AFP-Stähle

    Lehofer, H., 2007

    Research output: Thesis › Master's Thesis

  32. Published

    Entwicklung der Gefügestruktur und Beurteilung der effektiven Dehnung bei der Warmumformung

    Candic, M., Tian, B., Kelber, S. & Sommitsch, C., 2007, XXVI. Verformungskundliches Kolloquium. p. 151-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Erster und zweiter Projektbericht Jänner 2007 Diplomarbeit Florian Planitzer zum Projekt: NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Estimation of friction under forging conditions by means of the ring-on-disc test

    Buchner, B., Umgeher, A. & Buchmayr, B., 2007, 10th ESAFORM Conference on Material Forming. AIP Press, p. 505-508

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen

    Krumphals, F., Wlanis, T., Planitzer, F. & Sommitsch, C., 2007, Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen. p. 65-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    FE-Modelling of the Cross-Rolling-Piercing Process with Discher Discs

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, 2nd International Conference Simuation and Modelling of Metallurgical Processes in Steelmaking. p. 313-317

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Finite-Elemente-Analyse der Reibungsbedingungen beim Schrägwalzen mit Diescherscheiben

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, Seminar "Rohrherstellung und -verarbeitung. p. 59-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Finite-Elemente-Modellierung des Schrägwalzens

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 205-211

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Finite Elemente Simulation des Kalibrierprozesses für pulvermetallurgisch hergestellte Bauteile

    Wallner, S., 2007, 107 p.

    Research output: Thesis › Master's Thesis

  40. Published

    Flow Behaviour and Microstructure during Hot Deformation of Ti-5Al-5Mo-5V-3Cr-1Zr

    Warchomicka, F., Stockinger, M. & Degischer, H. P., 2007, Ti-2007 - Proceedings of the 11th World Conference on Titanium. Niinomi, M., Akiyama, S., Ikeda, M., Hagiwara, M. & Maruyama, K. (eds.). p. 511-514 4 p. (Ti-2007 - Proceedings of the 11th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Forschungsbericht Nr. 1 zum Projekt NK021-05

    Hatzenbichler, T. & Köppl, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Forschungsbericht Nr. 2 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Gekoppelte physikalische und numerische Simulation zur Optimierung von thermo-mechanischen Umformprozessen

    Sommitsch, C. & Buchmayr, B., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung" (Stahlzentrum VDEh), Düsseldorf. p. 89-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Heat Transfer during press hardening

    Forstner, K., Buchmayr, B. & Strobich, S., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Herstellung von walzplattierten Aluminium-Stahl-Werkstoffen für die Automobilindustrie

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, XXVI. Verformungskundliches Kolloquium. p. 199-207

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Hot forming and heat treatment simulation in a steel mill

    Redl, C., Tian, B., Wieser, V., Sommitsch, C. & Wlanis, T., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Improved mechanical properties of the die casting alloy AlSi9Cu3(Fe)(Zn) as a result of the combination of natural and artificial ageing

    Pabel, T., Geier, G., Rockenschaub, H. & Hopfinger, M., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 516-520

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Innovative Beiträge der Umformtechnik zum Leichtbau von Kraftfahrzeugen

    Buchmayr, B., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152. Jg., p. 136-141

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Interaction of Recrystallization and Precipitation during Hot Forming of Alloy 80 A

    Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In: Materials Science Forum . p. 2988-2993

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Investigation of Retained Strains during Multipass Deformation

    Candic, M., Tian, B., Kleber, S., Wiesner, M. & Sommitsch, C., 2007, In: Materials Science Forum . 558-559, p. 485-490

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Local Deformation of Ti Alloys and Ti Matrix Composites

    Poletti, C., Warchomicka, F., Kremmer, S., Stockinger, M. & Degischer, H. P., 2007, Ti-2007 - Proceedings of the 11th World Conference on Titanium. Niinomi, M., Akiyama, S., Ikeda, M., Hagiwara, M. & Maruyama, K. (eds.). p. 595-598 4 p. (Ti-2007 - Proceedings of the 11th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Modellierung der Schädigung während der Warmumformung

    Rüf, G., 2007, 232 p.

    Research output: Thesis › Doctoral Thesis

  53. Published

    Modelling of creep fatigue in containers during aluminium and copper extrusion

    Sommitsch, C., Sievert, R., Wlanis, T., Günther, B. & Wieser, V., 2007, In: Computational materials science. 39, p. 55-64

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Oils for Internal Thread Molding Description of a Test-Methodology

    Monetti, C., Buchner, B., Schiester, I., Tonnerer, F. & Hering, G., 2007, XXVI. Verformungskundliches Kolloquium. p. 243-254

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    ON MODELLING THE LOCAL DAMAGE EVOLUTION IN HOT WORK TOOL STEELS

    Krumphals, F., 2007

    Research output: Thesis › Diploma Thesis

  56. Published

    On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1146-1155

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L

    Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation

    Pschera, R., Winter, G. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Preform Optimization in Die Forging with Standardized Design Feature

    Zhuang, Y., 2007

    Research output: Thesis › Diploma Thesis

  60. Published

    Projektendbericht Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Projektendpräsentation September 2007 zum Projekt NK021-05

    Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Projektpräsentation Oktober 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Projektstatus April 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. Published

    Projektstatus Dezember 2007 zum Projekt NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  65. Published

    Projektstatus Februar 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Projektstatus Jänner 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Projektstatus Juli 2007 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Projektstatus Mai 2007 Diplomarbeit Wallner Stefan zum Projekt: P056-01-14

    Wallner, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Projektstatus März 2007 Diplomarbeit Wallner Stefan zum Projekt: P056-01-14

    Wallner, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Recrystallization behaviour of the nickel-based alloy 80 A during hot forming

    Mitsche, S., Poelt, P. & Sommitsch, C., 2007, In: Journal of microscopy. 227, p. 267-274

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Scheil-Gulliver simulation with partial redistribution of fast diffusers and simultaneous solid-solid phase transformations

    Buchmayr, B., Kozeschnik, E. & Rindler, W., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 826-831

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Schmelzen von Magnesium - Optimierung der Strömungsverhältnisse in einem Magnesiumofen

    Rockenschaub, H., Pabel, T., Sigmund, A., Wohlmuth, P. & Schumacher, P., 2007

    Research output: Non-textual form › Web publication/site › Research

  73. Published

    Simulation der Umformung und Schädigung bei Massivumformung

    Buchmayr, B., 2007, 6. Industriekolloquium "Hochfeste Strukturen" an der TU Clausthal/Zellerfeld. p. 125-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Starke Präsentationen rund um das Thema Schmelze und Schmelzen - Rückblick GIFA 2007

    Geier, G. & Pabel, T., 2007, In: Giesserei-Praxis. p. 381-395

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Umformtechnische Lösungen für den Bau leichter Karosserien

    Buchmayr, B., 2007, XXVI. Verformungskundliches Kolloquium. p. 189-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Verbesserte Leistungsfähigkeit von walzplattierten Aluminium-Stahl-Werkstoffen

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, Neue Wege zum wirtschaftlichen Leichtbau. p. 267-281

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    X-Ray computed tomography – Potenials, expectations and limits in practical application

    Schindelbacher, G., Pabel, T. & Geier, G., 2007, In: Casting plant and technology international. p. 34-41

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    XXVI. Verformungskundlichen Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2007, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  79. 2006
  80. Published

    Quantitative analysis of the microstructure of near β titanium alloy during compression tests

    Warchomicka, F., Stockinger, M. & Degischer, H. P., 3 Jul 2006, In: Journal of materials processing technology. 177, 1-3, p. 473-477 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Aluminium- und Zinkdruckguss für höchste Ansprüche

    Pabel, T. & Rockenschaub, H., 2006, In: Druckguss-Praxis. p. 109-111

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Bestimmung der Haftfestigkeit von Aluminium-Stahl-Verbunden

    Buchner, M., Buchmayr, B. & Bichler, C., 2006, XXV. Verformungskundliches Kolloquium. p. 205-213

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Bestimmung der Reibzahl unter Schmiedebedingungen mithilfe des Rotationsreibversuches

    Buchner, B., Markut, K. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium. p. 101-117

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Bestimmung von Materialparametern für poröse Werkstoffe

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, XXV. Verformungskundliches Kolloquium. p. 239-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Charakterisierung unterschiedlicher Schmierstoffe hinsichtlich des Reibzahlverlaufs beim Schmieden einer Aluminiumlegierung

    Maderthoner, G., 2006

    Research output: Thesis › Diploma Thesis

  86. Published

    Creep fatigue in extrusion dies - modelling and simulation

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Wieser, V., 2006, In: Steel grips : journal of steel and related materials. 4, p. 51-55

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Creep fatigue of multi-part container during hot extrusion of copper - simulation and experimental comparison

    Wlanis, T., Krumphals, F., Sommitsch, C. & Wieser, V., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    Design and Commissioning of a Rotational Forging Tribometer

    Markut, K. C., 2006

    Research output: Thesis › Diploma Thesis

  89. Published

    Determination of Material Parameters for porous Materials

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, ESAFORM 2006. p. 155-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Die hoch hinaus wollen

    Sommitsch, C., 2006, In: Wirtschafts-Blatt : Österreichs unabhängige Tageszeitung für Wirtschaft & Finanzen. p. 10-11

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Druckguss als Basis für Innovationen Teil 2

    Rockenschaub, H. & Pabel, T., 2006, In: Druckguss-Praxis. p. 143-184

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Druckguss - Basis für Innovationen Teil 1

    Rockenschaub, H. & Pabel, T., 2006, In: Druckguss-Praxis. p. 97-109

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

    Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 306-314

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Einflussgrößen auf die mechanisch-technologischen Eigenschaften von Schmiedeteilen aus AFP-Stählen

    Lehofer, H., Gelder, S., Taschauer, M. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium. p. 63-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Ein Stoff für alle Härtefälle

    Harlfinger, J. & Sommitsch, C., 2006, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. 9-9

    Research output: Contribution to journal › Article › Transfer › peer-review

  96. Published

    Entwicklungszustand und Nutzen der FEM Simulation von Massivumformprozessen

    Hatzenbichler, T., Harrer, O.-K. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 469-474

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Entwicklung von walzplattierten Aluminium-Stahl Verbunden für die Umformung in der Automobilindustrie

    Bichler, C., Brandecker, M., Buchner, M. & Buchmayr, B., 2006, 4. Ranshofener Leichtmetalltage. p. 233-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Erhöhte mechanische Eigenschaften der Druckgusslegierung AlSi9Cu3(Fe) durch optimierte Ausscheidungsverteilung infolge Kombination von Kalt- und Waremauslagerung

    Pabel, T., Rockenschaub, H., Geier, G. F. & Hopfinger, M., 2006, In: Gießerei-Rundschau. p. 175-185

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Feature extraction from micrographs of forged nickel based alloy

    Rinnhofer, A., Benesova, W., Jakob, G. & Stockinger, M., 2006, Proceedings - 18th International Conference on Pattern Recognition, ICPR 2006. p. 391-394 4 p. 1699227. (Proceedings - International Conference on Pattern Recognition; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Gesamtüberblick über das MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Influence of alloying, forming and cooling on the mechanical properties of direct air cooled medium carbon low alloy steels

    Lehofer, H., Gelder, S., Taschauer, M. & Buchmayr, B., 2006, In: Steel grips : journal of steel and related materials. 4, p. 290-294

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Investigation and numerical modelling of extrusion tool life time

    Redl, C., Wieser, V., Sommitsch, C., Wlanis, T., Schützenhöfer, W., Gaudin, S. & Geigges, B., 2006, Proceedings of 7th International Tooling Conference, M. Rosso, M. A. Grande, D. Uguespp (Eds.),. p. 589-596

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Investigations on fracture of a Ni-base alloy at elevated temperatures by continuum damage mechanics

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, Proceedings of the 9th International Conference on Material Forming, ESAFORM. p. 175-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Lehrstuhl für Umformtechnik

    Buchmayr, B., Harrer, O.-K. & Sommitsch, C., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 271-275

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Methodik zur strukturierten Analyse eines Kaltprofilierprozesses am Beispiel der Herstellung von längsnahtgeschweißten Edelstahlrohren

    Weiß, S. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 337-343

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Modellierung der duktilen Schädigung einer Nickelbasislegierung unter Berücksichtigung der Werkstoffentfestigung bei der Warmumformung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium,. p. 167-183

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Modellierung der duktilen Schädigung während der Warmumformung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  108. Published

    Modellierung des Aluminium- und Kupfer-Strangpressens unter dem Aspekt der Lebensdauervorhersage der Werkzeuge und Rezipienten – Teil 2

    Sommitsch, C., Wlanis, T., Krumphals, F. & Planitzer, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  109. Published

    Modelling ductile damage of a Ni-base alloy considering the microstructure evolution during hot working

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, In: Steel grips : journal of steel and related materials. 4, p. 56-63

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Modelling of creep-fatigue in extrusion dies

    Sommitsch, C., Wlanis, T. & Wieser, V., 2006, XXV. Verformungskundliches Kolloquium. p. 193-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  111. Published

    Neue Wärmebehandlung für beste mechanische Eigenschaften im Aluminium-Druckguss

    Rockenschaub, H., Pabel, T., Geier, G. F., Holzer, H. & Hopfinger, M., 2006, In: Giesserei. p. 20-33

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    On modelling of dynamic recrystallisation of fcc materials with low stocking fault energy

    Sommitsch, C. & Mitter, W., 2006, In: Acta materialia. p. 357-375

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    On the modelling of the interaction of materials softening and ductile damage during hot working of Alloy 80A

    Sommitsch, C., Pölt, P., Rüf, G. & Mitsche, S., 2006, In: Journal of materials processing technology. 177, p. 282-286

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Optimierung der mechanischen Eigenschaften von AlMgSi-Druckgusslegierungen

    Trenda, G., Kraly, A., Pabel, T. & Rockenschaub, H., 2006, In: Gießerei-Rundschau. p. 48-49

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    Optimization of the Thermo-Mechanical Processing of Direct Air cooled Steels

    Lehofer, H., Gelder, S., Taschauer, M. & Buchmayr, B., 2006, 15th IFHTSE (International Federation of Heat-Treatment and Surface Congress 2006). p. 155-160

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  116. Published

    Parhaat lujuusarvot Al-painevaluille (Die besten Festigkeitswerte im Al-Druckguss)

    Rockenschaub, H., Pabel, T., Geier, G. F., Holzer, H. & Hopfinger, M., 2006, In: valimoviesti - Suomen Valimotekninen Yhdistys. 4, p. 34-35

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    Präsentation "Simulation of the radial forging process of pipes", Workpackage 1, Projekt P056-01-10, Juli 2006

    Hatzenbichler, T. & Wallner, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  118. Published

    Präsentation "Simulation of the radial forging process of pipes", Workpackage 2, Projekt P056-01-10, August 2006

    Hatzenbichler, T. & Wallner, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  119. Published

    Präsentation "Simulation of the radial forging process of pipes", Workpackage 3, Projekt P056-01-10, Juli 2006

    Hatzenbichler, T. & Wallner, S., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  120. Published

    Projektbericht "Berechnung der Werkzeugbelastung unter Verwendung der bisherigen Modelle für die Geometrien "Audi" und "TKP", MCL Projekt M8, März 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  121. Published

    Projektbericht P056-01-07 "Simulation of Radial Forging - Results with lower friction (shear 0,2) between mandrel and workpiece

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  122. Published

    Projektbericht Projekt P056-LA-01-05 "Zwischenbericht über die Tätigkeiten im ersten Forschungsjahr 03/2005 bis 02/2006"

    Buchmayr, B., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  123. Published

    Projektbericht "Simulation der Werkzeugbelastung für schrägverzahnte Zahnräder", Projekt MCL M8, November 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  124. Published

    Projektbericht "Simulation des Denscal-Prozesses für eine Kupplungsklaue"

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  125. Published

    Projektbericht "Simulation des Walzprozesses für die Geometrie "B", MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  126. Published

    Projektbericht "Simulation des Walzprozesses für die Geometrie "TKP"", MCL Projekt M8, Jänner 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  127. Published

    Projektbericht "Simulation des Walzprozesses für die Geometrie "VW", MCL Projekt M8, Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  128. Published

    Projektbericht "Stand der Simulation des Walzprozesses, Juli 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  129. Published

    Projektbericht "Stand der Simulation des Walzprozesses", Juni 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  130. Published

    Projektbericht "Stand der Simulation des Walzprozesses, MCL Projekt M8, September 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  131. Published

    Projektbericht "Stand des Simulation des Walzprozesses", Mai 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  132. Published

    Projektbericht "Versuch der Vorformauslegung für die Geometrie VW" Projekt MCL M8, April 2006

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  133. Published

    Projektstatus 1. Quartal 2006, MCL Projekt M8

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  134. Published

    Projektstatus 2. Quartal 2006, MCL Projekt M8

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  135. Published

    Projektstatus 3. Quartal 2006, MCL Projekt M8

    Hatzenbichler, T., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  136. Published

    Quantitative Metallography

    Mitsche, S., Pölt, P. & Sommitsch, C., 2006, In: GIT imaging & microscopy. 1, p. 38-39

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    Radial forging of a nickel base alloy at different temperatures

    Harrer, O.-K., Wallner, S., Wieser, V. & Sommitsch, C., 2006, In: Steel grips : journal of steel and related materials. 4, p. 356-360

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Recrystallization behaviour of the nickel based alloy 80A during hot forming

    Mitsche, S., Sommitsch, C., Pölt, P. & Kleber, S., 2006, Proceedings of the 13th Conference and Workshop on Electron Backscatter Diffraction, Royal Microscopical Society (RMS). p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. Published

    Risiken erkannt - kein Geld verbrannt

    Stefan, W. & Buchmayr, B., 2006, In: Qualität und Zuverlässigkeit : QZ. 51, p. 29-32

    Research output: Contribution to journal › Article › Research › peer-review

  140. Published

    Simulation der Gefügeentwicklung beim Stabwalzen von Rippenstahl

    Sommitsch, C., Fohringer, H., Jahn, A., Stöckl, C. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 344-349

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Simulation der Temperatur- und Gefügeentwicklung beim Stabwalzen von BSt 550

    Sommitsch, C. & Buchmayr, B., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  142. Published

    Systematische Bestimmung des rekristallisierten Gefügeanteiles einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

    Mitsche, S., Sommitsch, C. & Poelt, P., 2006, Sonderbände der praktischen Metallographie. p. 43-50

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  143. Published

    Über das Langschmieden einer Nickelbasislegierung mit unterschiedlichen Ausgangstemperaturen

    Wallner, S., Harrer, O.-K. & Wieser, V., 2006, XXV. Verformungskundliches Kolloquium. p. 157-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  144. Published

    Variation of the precipitation mechanisms for high pressure die casting alloy AlSi9Cu3(Fe)

    Geier, G. F., Rockenschaub, H., Pabel, T. & Hopfinger, M., 2006, In: International foundry research = Giessereiforschung. p. 32-48

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block Strangpressen

    Hatzenbichler, T., 2006, 178 p.

    Research output: Thesis › Doctoral Thesis

  146. Published

    XXV. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor), 2006, Leoben, Österreich: Montanuniversität Leoben, Lehrstuhl für Umformtechnik.

    Research output: Book/Report › Anthology › Research

  147. 2005
  148. Published

    12. Bericht zum Projekt "Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block-Strangpressen"

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  149. Published

    13. Bericht zum Projekt "Vorhersage und Minimierung des Innenfehlerbereichs beim Block-auf-Block-Strangpressen"

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  150. Published

    Abschlussbericht Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  151. Published

    Analyse und Verbesserung des bestehenden FEM Modells

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  152. Published

    Analysis of microstructural properties of in 718 after high speed forging

    Renhof, L., Krempaszky, C., Werner, E. & Stockinger, M., 2005, p. 261-270. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  153. Published

    Beschleunigung der Auslagerungsvorgänge der Druckgusslegierung AlSi9Cu3(Fe) bei gleichzeitiger Erhöhung der statischen mechanischen Eigenschaften (Teil 1)

    Rockenschaub, H., Pabel, T., Geier, G. F. & Hopfinger, M., 2005, In: Druckguss-Praxis. p. 95-104

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Beschleunigung der Auslagerungsvorgänge der Druckgusslegierung AlSi9Cu3(Fe) bei gleichzeitiger Erhöhung der statischen mechanischen Eigenschaften (Teil 2)“

    Pabel, T., Rockenschaub, H., Geier, G. F., Hopfinger, M. & Kothleitner, G., 2005, In: Druckguss-Praxis. p. 137-146

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    Bestimmung der Reibzahl mittels Ringstauchversuch

    Hatzenbichler, T., Buchmayr, B., Hochmann, H., Fössl, T. & Zink, A., 2005, Sommerschule Steiermark. p. 161-170

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. Published

    Blechprüfung

    Sommitsch, C. & Buchmayr, B., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  157. Published

    Comparison of fracture criteria at high temperatures for nickel-based alloys

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, Steelsim 2005. p. 575-588

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. Published

    Development of microstructure in forging alloy 718

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, Steelsim 2005. p. 463-471

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    Ductile fracture analysis with damage models of effective stresses at high temperatures

    Sommitsch, C. & Rüf, G., 2005, 8th ICTP 2005. p. 327-328

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  160. Published

    Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

    Sommitsch, C., Poelt, P., Mitsche, S. & Walter, M., 2005, Sommerschule Steiermark. p. 113-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  161. Published

    Einfluss der Rezipientenreibung auf die Prozessparameter beim direkten Strangpressen

    Hatzenbichler, T., Buchmayr, B. & Umgeher, A., 2005, XXIV. Verformungskundliches Kolloquium. p. 53-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, XXIV. Verformungskundliches Kolloquium. p. 139-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    "Feinabstimmung des Teilmodells" Projekt MCL M8

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  164. Published

    Finite Elemente Berechnung eines Langschmiedeprozesses

    Wallner, S., Harrer, O.-K. & Wieser, V., 2005, XXIV. Verformungskundliches Kolloquium. p. 157-165

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    Gefügemodelle für die Warmformgebung

    Sommitsch, C. & Buchmayr, B., 2005, Freiberger Forschungsforum, 56. Berg- und Hüttenmännischer Tag. p. 16-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  166. Published

    Gesenkschmieden von Portalachsen - Simulation und praktische Erfahrung

    Hein, G., Kollingbaum, M., Hatzenbichler, T. & Wollendorfer, G., 2005, XXIV. Verformungskundliches Kolloquium. p. 193-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Gesenkschmiedetechnik - eine systemanalytische Betrachtung

    Buchmayr, B., 2005, Sommerschule Schmiedetechnik. p. 7-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  168. Published

    Goals, Recent developments and critical issues in modelling of hot rolling, forging, heat treatment and prediction of material properties

    Buchmayr, B., 2005, Steelsim 2005. p. 2-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  169. Published

    Influence of container friction on the main process parameters in direct extrusion

    Hatzenbichler, T., Buchmayr, B. & Umgeher, A., 2005, In: Steel grips : journal of steel and related materials. 3, p. 126-129

    Research output: Contribution to journal › Article › Research › peer-review

  170. Published

    Influence of TRIP on the residual stress development during heat treatment of high alloyed cast irons

    Raberger, R., Buchmayr, B. & Brandner, M., 2005, IDE200, Internationale Konferenz, Distortion Engineering. p. 365-371

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    Measurement of marcoscopic residual stress and resulting distortion during machining

    Krempaszky, C., Werner, E. A. & Stockinger, M., 2005, Materials Science and Technology 2005 - Proceedings of the Conference. p. 109-118 10 p. (Materials Science and Technology; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  172. Published

    Methods of controlling the cross-section in rolling mills for long products

    Harrer, O.-K., Hatzenbichler, T., Kostúr, K., Pástor, M. & Truchlý, M., 2005, In: Steel grips : journal of steel and related materials. 3, p. 375-379

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Microstructure Simulation in Radial Forging of Nickel Base Alloys

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, The 8th ESAFORM Conference on Material Forming. p. 515-518

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    Numerical simulation of forging alloy 718

    Harrer, O.-K., Wallner, S. & Wieser, V., 2005, 8th ICTP 2005. p. 325-326

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    On the determination of the recrystallised fraction during hot forming

    Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, In: Steel grips : journal of steel and related materials. 3, p. 287-293

    Research output: Contribution to journal › Article › Research › peer-review

  176. Published

    Optimisation of complex heating furnace - hot rolling mill by simulation system

    Kostúr, K., Harrer, O.-K. (Editor), Pástor, M. & Truchlý, M., 2005, Kosice.

    Research output: Book/Report › Scholarly edition

  177. Published

    Optimized rod rolling to achieve desired mechanical properties

    Sommitsch, C., Roveda, M., Gaudenzi, N. & Buchmayr, B., 2005, Steelsim 2005. p. 407-419

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Optimizing the forging of critical aircraft parts by the use of finite element coupled microstructure modeling

    Stockinger, M. & Tockner, J., 2005, p. 87-95. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  179. Published

    Projektbericht "Input data for the numerical simulation" Projekt P056-01-07

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  180. Published

    Projektbericht "Simulation of Radial Forging" Projekt P056-01-07

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  181. Published

    Projektbericht "Stand der Simulation des Walzprozesses" Projekt MCL M8, Oktober 2005,

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  182. Published

    Projektbericht "Stand der Simulation des Walzprozesses" Projekt MCL M8, September 2005

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  183. Published

    Projektbericht zu "Stand der Simulation des Walzprozesses" Projekt MCL M8, Dezember 2005,

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  184. Published

    Projektstatus Projekt MCL M8

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  185. Published

    Quartalsbericht 01/2005 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  186. Published

    Quartalsbericht 01/2005 Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  187. Published

    Quartalsbericht 02/2005 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  188. Published

    Quartalsbericht 02/2005 Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  189. Published

    Quartalsbericht 03/2005 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  190. Published

    Quartalsbericht 03/2005 Projekt MCL M7 Optimierung der Umformbedingungen beim Langsschmieden von Nickelbasislegierungen

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  191. Published

    Quartalsbericht 04/2004 Projekt MCL M6 "Modellierung der Werkstoffschädigung während der Warmumformung"

    Rüf, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  192. Published

    Quartalsbericht 04/2004 Projekt MCL M7 "Optimierung der Umformbedingungen beim Langschmieden von Nickelbasislegierungen"

    Harrer, O.-K., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  193. Published

    Report III on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  194. Published

    Report II on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  195. Published

    Report IV on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  196. Published

    Report on the simulation of ORI configuration rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  197. Published

    Residual stresses in IN 718 turbine disks

    Krempaszky, C., Werner, E. A. & Stockinger, M., 2005, p. 527-538. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  198. Published

    Simulation des Reckschmiedens - ein Erfahrungsbericht

    Harrer, O.-K., Wallner, S. & Wieser, V., 2005, Sommerschule Steiermark. p. 127-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  199. Published

    Sommerschule Schmiedetechnik

    Buchmayr, B. (Editor), 2005, Leoben: Lehrstuhl für Umformtechnik. Bruno Buchmayr.

    Research output: Book/Report › Anthology › Research

  200. Published

    Spray forming and post processing of superalloy rings

    Walter, M., Stockinger, M., Tockner, J., Ellendt, N. & Uhlenwinkel, V., 2005, p. 429-440. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  201. Published

    The mathematical modelling of furnace for effeciency optimisation with rolling mill

    Pástor, M., Kostur, K., Harrer, O.-K. & Truchlý, M., 2005, In: Acta metallurgica Slovaca. p. 265-270

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    Über die Bestimmung des rekristallisierten Anteils bei Warmumformung

    Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, XXIV. Verformungskundliches Kolloquium. p. 113-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  203. Published

    Versuche zur Ermittlung von Eingabeparametern für die numerische Simulation

    Hatzenbichler, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  204. Published

    Werkstoff-Verformbarkeit in Blechumformprozessen unter Berücksichtigung der Umformhistorie

    Ofenheimer, A., Buchmayr, B. & Cerjak, H., 2005, XXIV. Verformungskundliches Kolloquium. p. 21-29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    XXIV. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor), 2005, Leoben, Österreich: Montanuniversität Leoben, Lehrstuhl für Umformtechnik.

    Research output: Book/Report › Anthology › Research

  206. Published

    Zwischenbericht zum Auftrag "Modellierung des Aluminium- und Kupferstrangpressens unter dem Aspekt der Lebensdauervorhersage der Werkzeuge und Rezipienten"

    Sommitsch, C. & Wlanis, T., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  207. 2004
  208. Published

    An EBSD-study of recrystallisation behaviour of a nickel base alloy caused by hot compression

    Mitsche, S., Poelt, P., Sommitsch, C. & Walter, M., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  209. Published

    EBSD – and the recrystallisation of Ni-base-alloys

    Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  210. Published

    EBSD – and the recrystallisation of Ni-base-alloys

    Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004, Proceedings of the 13th European Microscopy Congress. p. 695-696

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  211. Published

    Effects of hipping and local chills on mechanical properties of Al-alloys

    Schindelbacher, G., Pabel, T. & Rockenschaub, H., 2004, In: Livarski vestnik. p. 70-79

    Research output: Contribution to journal › Article › Research › peer-review

  212. Published

    Euroguss 2004 – Druckguss im Dialog“, Druckguss-Praxis

    Rockenschaub, H. & Pabel, T., 2004, In: Druckguss-Praxis. p. 75-104

    Research output: Contribution to journal › Article › Research › peer-review

  213. Published

    Microstructure modeling as a tool to optimize forging of critical aircraft parts

    Stockinger, M. & Tockner, J., 2004, In: Materials Science Forum . 467-470, I, p. 683-688 6 p.

    Research output: Contribution to journal › Conference article › peer-review

  214. Published

    Modeling of the Vacuum Arc Remelting process at Böhler Edelstahl GmbH

    Sommitsch, C., 2004, In: PAM-TALK. 25, Spring, p. 12-13

    Research output: Contribution to journal › Article › Research › peer-review

  215. Published

    Modellierung der Werkstoffschädigung während der Warmumformung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2004, Proceedings of the XXIII.Verformungskundliches Kolloquium. p. 165-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. Published

    New Developments in the Design and Production of Container Assemblies

    Wieser, V., Sommitsch, C., Haberfellner, K. & Lehofer, H., 2004, Proceedings of the 8th International Aluminium Extrusion Technology. p. 309-316

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  217. Published

    Real-time stereo for industrial inspection

    Buchner, B. & O'Leary, P., 2004, Machine Vision Applications in Industrial Inspection XII. p. 22-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  218. Published

    Stress Relaxation Measurements of Metadynamic and Static Recrystallisation of Alloy 80A

    Kleber, S., Sommitsch, C. & Wiessner, M., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  219. Published

    Stress Relaxation Measurements of Metadynamic and Static Recrystallisation of Alloy 80A

    Kleber, S. & Sommitsch, C., 2004, In: Materials Science Forum . p. 1237-1242

    Research output: Contribution to journal › Article › Research › peer-review

  220. Published

    Systematische Bestimmung des rekristallisierten Gefügeanteiles einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

    Walter, M., Sommitsch, C., Wedl, F. & Kleber, S., 2004, Sonderbände der praktischen Metallographie. p. 245-250

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  221. Published

    Verbesserung der mechanischen Eigenschaften von Al-Legierungen durch den Einsatz von Kühlkokillen im Sandguss

    Pabel, T., Schindelbacher, G. & Rockenschaub, H., 2004, In: Giesserei-Praxis. p. 95-108

    Research output: Contribution to journal › Article › Research › peer-review

  222. 2003
  223. Published

    Modeling and Investigation of Dynamic Recrystallisation in Nickel-Based Superalloys

    Sommitsch, C., Walter, M., Wedl, F. & Kleber, S., 2003, In: Materials Science Forum . p. 743-748

    Research output: Contribution to journal › Article › Research › peer-review

  224. Published

    Numerical Simulation of the VAR Process with calcosoft-2D and its Validation

    Reiter, G., Maronnier, V., Sommitsch, C., Gäumann, M., Schützenhöfer, W. & Schneider, R., 2003, LMPC 2003 - Proceedings of the International Symposium on Liquid Metal Processing and Casting. p. 77-86

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  225. Published

    Quantification of the recrystallized fraction in a nickel-base-alloy from EBSD-data

    Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2003.

    Research output: Contribution to conference › Poster › Research › peer-review

  226. Published

    Quantification of the Recrystallized Fraction in a Nickel-Base-Alloy from EBSD data

    Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2003, In: Microscopy and microanalysis. Suppl. 3, p. 344-345

    Research output: Contribution to journal › Article › Research › peer-review

  227. 2002
  228. Published

    A dislocation density model for the simulation of hot forming processes

    Sommitsch, C., Wieser, V. & Kleber, S., 2002, In: Journal of materials processing technology. p. 130-137

    Research output: Contribution to journal › Article › Research › peer-review

  229. Published

    Werkstoff- und Produktionstechnik mit Mathcad

    Buchmayr, B., 2002

    Research output: Book/Report › Book › Research

  230. 2001
  231. Published

    Microstructural Simulation of Hot Forming Processes

    Sommitsch, C. & Wieser, V., 2001, EUROMAT 2001 – Proceedings of the 7th European Conference on Advanced Materials and Processes. Wiley-VCH , p. CDROM-CDROM

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  232. Published

    Mikrostrukturelle Modellierung der Warmumformung

    Buchmayr, B., Auzinger, D., Samoilov, A. & Sommitsch, C., 2001, In: Berg- und hüttenmännische Monatshefte : BHM. 146, p. 385-388

    Research output: Contribution to journal › Article › Research › peer-review

  233. Published

    Modelling of δ-phase dissolution during preheating of INCONEL718 turbine disks

    Stockinger, M., Kozeschnik, E., Buchmayr, B. & Horvath, W., 2001, p. 141-148. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  234. Published

    Simulation der Gefügeentwicklung bei Warmwalzen

    Sommitsch, C., Wieser, V., Wurm, C. & Lenger, H., 2001, In: Berg- und hüttenmännische Monatshefte : BHM. 146, p. 6-9

    Research output: Contribution to journal › Article › Research › peer-review

  235. 2000
  236. Published

    A Precipitation Model for Multi-Phase Systems in Nickel-Base Superalloys

    Sommitsch, C., Kozeschnik, E., Wasle, G. & Buchmayr, B., 2000, Proceedings of THERMEC´2000 - International Conference on Processing and Manufacturing of Advanced Materials. p. CDROM-CDROM

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  237. Published

    Modelling Recrystallization of Nickel-Base Alloys

    Sommitsch, C., Mitter, W. & Kleber, S., 2000, Materials Week 2000 – Proceedings of the International Congress on Advanced Materials, their Processes and Applications. p. Internet-Internet

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  238. 1997
  239. Published

    Verarbeitungs- und Gebrauchseigenschaften von Werkstoffen

    Sommitsch, C., 1997, In: Schweissen und Schneiden. p. 568-575

    Research output: Contribution to journal › Article › Research › peer-review

  240. 1800
  241. Published

    Digitalization of forged alloy 718 parts with implemented microstructure and fracture mechanic model

    Gruber, C., 1800

    Research output: Thesis › Doctoral Thesis

  242. Published

    Process development for manufacturing ultrafine-grained aluminum semi-finished-products

    Schwarz-Gsaxner, A., 1800

    Research output: Thesis › Doctoral Thesis

Previous 1 2 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben