Chair of Materials Physics (430)

Organisational unit: Chair

1301 - 1400 out of 1,986Page size: 100

Research output

  1. 2012
  2. Published

    Semi-Analytical Approaches to Assess the Crack Driving Force in Periodically Heterogeneous Elastic Materials

    Fischer, F. D., Predan, J., Fratzl, P. & Kolednik, O., 2012, In: International Journal of Fracture. 173, p. 57-70

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Silver nanoparticles sintering at low temperature on a copper substrate: In situ characterisation under inert atmosphere and air

    Zalesak, J., 2012, In: Journal of Mining and Metallurgy, Section B: Metallurgy. 48, 1, p. 63-71 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Strength, Hardening, and Failure Observed by In Situ TEM Tensile Testing

    Kiener, D., Kaufmann, P. & Minor, A. M., 2012, In: Advanced engineering materials. 14, p. 960-967

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Structure related stress gradients in thin nanocrystalline films revealed by X-ray nanodiffraction

    Daniel, R., Keckes, J. & Mitterer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    TEM characterization of CrN thin films epitaxially grown on MgO (001)

    Harzer, T. P., Kormout, K., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Thermally treated hard coatings characterized by XRD coupled with four-point bending

    Steffenelli, M., Riedl, A., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    The structure and mechanical properties of spines from the cactus Opuntia ficus-indica

    Gindl-Altmutter, W. & Keckes, J., 2012, In: BioResources. 7, 1, p. 1232-1237

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    TiO2 (100) Al2O3 (0001) interface: A first-principles study supported by experiment

    Popov, M., Spitaler, J., Mühlbacher, M., Walter, C., Keckes, J., Mitterer, C. & Draxl, C., 2012, In: Physical review : B, Condensed matter and materials physics. 86, p. 2053091-20530913

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Tuning the flow of light in semiconductor-based photonic crystals by magnetic fields

    Meisels, R., Glushko, O. & Kuchar, F., 2012, In: Photonics and nanostructures. 10, 1, p. 60-68

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Wieder ein Preis

    Kiener, D., 2012, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. p. 36-36

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G. A., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S. & Burghammer, M., 2012, In: Scripta materialia. 67, p. 748-751

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Yield and plastic flow of soft metals in small volumes loaded in tension and flexure

    Dunstan, D. J., Gallé, J. U., Hou, X. D., P'ng, K. M. Y., Bushby, A. J., Yang, B. & Kiener, D., 2012, In: Philosophical magazine. 92, p. 3199-3215

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2011
  15. Published

    Local and non-local behavior and coordinated buckling of CNT turfs

    Qiu, A., Bahr, D. F., Zbib, A. A., Bellou, A., Mesarovic, S. D., McClain, D., Hudson, W., Jiao, J., Kiener, D. & Cordill, M. J., Apr 2011, In: Carbon. 49, 4, p. 1430-1438 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Ab initio molecular dynamics model for density, elastic properties and short range order of Co–Fe–Ta–B metallic glass thin films

    Hostert, C., Music, D., Bednarcik, J., Keckes, J., Kapaklis, V., Hjövarsson, B. & Schneider, J. M., 2011, In: European physical journal B, Condensed matter physics : EPJ B. p. 4754011-4754017

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Advanced characterisation of the Cu-MgO interface structure by Cs-corrected high-resolution transmission electron microscopy

    Zhang, Z., Daniel, R., Dehm, G. & Mitterer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    A micro-level strain analysis of a high-strength dual-phase steel

    Kapp, M., Hebesberger, T. & Kolednik, O., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 687-691

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    A new testing rig for SEM in-situ fatigue testing

    Reiser, J., Guster, C., Motz, C. & Pippan, R., 2011, Proceedings of Euromat 2011. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    An Overview on the Fracture Behavior of Metals Processed by High Pressure Torsion

    Hohenwarter, A. & Pippan, R., 2011, In: Materials Science Forum . 667-669, p. 671-676

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens

    Senger, J., Weygand, D., Motz, C., Gumbsch, P. & Kraft, O., 2011, In: Acta materialia. p. 2937-2947

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Atomic and electronic characterization on the CrN/Cr/Si interfaces using CS-corrected HRTEM

    Zhang, Z., Daniel, R. & Mitterer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Attenuation of ultrasound in severely plastically deformed nickel

    Kozhushko, V. V., Paltauf, G., Krenn, H., Scheriau, S. & Pippan, R., 2011, In: NDT and E international. 44, 3, p. 261-266

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Berkeley Scientists Pioneer Nanoscale Nuclear Materials Testing Capability: LBL News Center

    Kiener, D., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  26. Published

    Bioinspired Design Criteria for Damage-Resistant Materials with Periodically Varying Microstructure

    Kolednik, O., Predan, J., Fischer, F. D. & Fratzl, P., 2011, In: Advanced functional materials. 21, p. 3634-3641

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Bruch- und Verformungsverhalten von ultrafeinkörnigem Titan

    Völker, B., 2011

    Research output: Thesis › Diploma Thesis

  28. Published

    Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds

    Veigel, S., Müller, U., Keckes, J., Obersriebnig, E. M. & Gindl-Altmutter, W., 2011, In: Cellulose. p. 1227-1237

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Decomposition pathways in age hardening of Ti-Al-N films

    Rachbauer, R., Massl, S., Stergar, E., Holec, D., Kiener, D., Keckes, J., Patscheider, J., Stiefel, M., Leitner, H. & Mayrhofer, P. H., 2011, In: Journal of applied physics. 110, p. 023515-1-023515-10

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Deformation behavior of miniaturized copper bicrystals and corresponding dislocation boundary reactions

    Imrich, P. J., Kirchlechner, C., An, X., Zhang, Z. & Dehm, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Deformation Mechanisms in Micron-Sized PST-TiAl Compression Samples: Experiment and Model

    Rester, M., Fischer, F. D., Kirchlechner, C., Schmölzer, T., Clemens, H. & Dehm, G., 2011, In: Acta materialia. 59, p. 3410-3421

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion

    Scheriau, S., Zhang, Z., Kleber, S. & Pippan, R., 2011, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 2776-2786

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Dislocation plasticity of Al film on polyimide investigated by cross-sectional in situ transmission electron microscopy straining

    Oh, S. H., Rentenberger, C., Im, J., Motz, C., Kiener, D., Karnthaler, H.-P. & Dehm, G., 2011, In: Scripta materialia. 65, p. 456-459

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Dislocation storage in single slip oriented Cu micro-tensile samples: New insights by X-ray microdiffraction

    Kirchlechner, C., Kiener, D., Motz, C., Labat, S., Vaxelaire, N., Perroud, O., Micha, J.-S., Ulrich, O., Thomas, O., Dehm, G. & Keckes, J., 2011, In: Philosophical magazine. 91, p. 1256-1264

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Effect of Impurities on the Microstructure of HPT Deformed Nickel

    Rathmayer, G. & Pippan, R., 2011, In: Materials Science Forum . p. 797-802

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Effect of Large Shear Deformations on the Fracture Behavior of a Fully Pearlitic Steel

    Hohenwarter, A., Taylor, A., Stock, R. & Pippan, R., 2011, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42, p. 1609-1618

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Effect of oxide particles on the stabilization and final microstructure in aluminium

    Bachmaier, A. & Pippan, R., 2011, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 7589-7595

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Effect of specimen size on the tensile strength of WC–Co hard metal

    Klünsner, T., Wurster, S., Supancic, P., Ebner, R., Jenko, M., Glätzle, J., Püschel, A. & Pippan, R., 2011, In: Acta materialia. 59, p. 4244-4252

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Effects of thermal annealing on the microstructure of sputtered Al2O3 coatings

    Edlmayr, V., Harzer, T. P., Hoffmann, R., Kiener, D., Scheu, C. & Mitterer, C., 2011, In: Journal of vacuum science & technology / A (JVST). p. 0415061-0415068

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Einfluss der Hochverformung auf das Ermüdungsverhalten eines austenitischen Stahls

    Renk, O., 2011

    Research output: Thesis › Diploma Thesis

  41. Published

    Electrical properties of ZnO nanorods studied by conductive atomic force microscopy

    Beinik, I., Kratzer, M., Wachauer, A., Wang, L., Lechner, R., Teichert, C., Motz, C., Anwand, W., Brauer, G., Chen, X., Hsu, Y. F. & Djuricis, A., 2011, In: Journal of applied physics. 110, p. 052005-1-052005-7

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Examples of scanning transmission electron microscopy for microstructural characterization of alloys

    Rashkova, B., Thomas, J., Moser, G., Rester, M. & Dehm, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Forschergeist

    Kiener, D., 2011, In: Stadt-Journal. p. 3-3

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Fracture behavior of tungsten based materials

    Wurster, S., 2011, 174 p.

    Research output: Thesis › Doctoral Thesis

  45. Published

    Fracture behaviour of tungsten–vanadium and tungsten–tantalum alloys and composites

    Wurster, S., Gludovatz, B., Hoffmann, A. & Pippan, R., 2011, In: Journal of nuclear materials. p. 166-176

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Fracture toughness evaluation of ultrafine-grained nickel

    Hohenwarter, A. & Pippan, R., 2011, In: Scripta materialia. 64, p. 982-985

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Fracture toughness of SPD deformed rail steels

    Kammerhofer, C., Hohenwarter, A. & Pippan, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Generation of bulk nanocomposites by severe plastic deformation

    Bachmaier, A., 2011

    Research output: Thesis › Doctoral Thesis

  49. Published

    Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars

    Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J.-S., Ulrich, O. & Dehm, G., 2011, In: Acta materialia. 59, p. 5618-5626

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel

    Rathmayer, G. & Pippan, R., 2011, In: Acta materialia. p. 7228-7240

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Influence of impurities on the fracture behaviour of tungsten

    Gludovatz, B., Wurster, S., Weingärtner, R., Hoffmann, A. & Pippan, R., 2011, In: Philosophical magazine. p. 3006-3020

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Influence of Microstructure on Material Behaviour of WC-Co Hard Metals under Static and Cyclic Loading Conditions

    Klünsner, T., 2011, 111 p.

    Research output: Thesis › Doctoral Thesis

  53. Published

    In Situ High Temperature X-Ray Diffraction Reveals Residual Stress Depth-Profiles in Blasted TiN Hard Coatings

    Bartosik, M., Pitonak, R. & Keckes, J., 2011, In: Advanced engineering materials. p. 705-711

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    In situ nanocompression testing of irradiated copper

    Kiener, D., Hosemann, P., Maloy, S. A. & Minor, A. M., 2011, In: Nature Materials. 10, p. 608-613

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    In-situ TEM heating study of the y lamellae formation inside the alpha2 matrix of a Ti-45Al-7.5Nb alloy

    Cha, L., Clemens, H., Dehm, G. & Zhang, Z., 2011, In: Advanced materials. 146-147, p. 1365-1368

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    In situ µLaue: Instrumental setup for the deformation of micron sized samples

    Kirchlechner, C., Keckes, J., Micha, J.-S. & Dehm, G., 2011, In: Advanced engineering materials. 13, p. 837-844

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Interaction of silver nanopowder with copper substrate

    Sopoušek, J., Buršík, J., Zálešák, J., Buršíková, V. & Brož, P., 2011, In: Science of sintering. 43, 1, p. 33-38 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Internationales Interesse für Forschungsergebnisse von Leobener Materialwissenschafter: Leobennews

    Kiener, D., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  59. Published

    Internationales Interesse für Forschungsergebnisse von Leobener Materialwissenschafter: TU Austria

    Kiener, D., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  60. Published

    Microstructure and adhesion of as-deposited and annealed Cu/Ti films on polyimide

    Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 729-734

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Microstructure and Properties of a Fe-Cu Composite Processed by HPT Powder Consolidation

    Bachmaier, A. & Pippan, R., 2011, In: Materials Science Forum . p. 229-234

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature

    Cha, L., Clemens, H. & Dehm, G., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 703-708

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Microstructure of Pure Ni Subjected to High Pressure Torsion

    Zhang, H. W., Huang, X., Hansen, N. & Pippan, R., 2011, In: Materials Science Forum . p. 529-534

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Mit der Technik der Tausendfüßler

    Kiener, D., 2011, In: Die Presse. p. 34-35

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Modelling of electron energy near edge structures of alloys -How well can we do?

    Holec, D., Rachbauer, R., Kiener, D., Cherns, P. D., Costa, P. M. F. J., Mayrhofer, P. H. & Humphreys, C. J., 2011,

    Proceedings of International Conference on Electron Nanoscopy & XXXII Annual Meeting of EMSI

    .     p. 129-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Nano-Beam X-ray Diffraction as a Tool to Characterize Gradients of Microstructure and Residual Stress in Nanocrystalline Hard Coatings

    Bartosik, M., Daniel, R., Mitterer, C., Schoeder, S., Burghammer, M. & Keckes, J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    Nano-beam-x-ray diffraction reveals strain, composition, texture and crystal size gradients across nano-crystalline thin films

    Keckes, J., Daniel, R., Bartosik, M., Mitterer, C., Schoeder, S. & Burghammer, M., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Nanocomposites Obtained By High Pressure Torsion Powder Consolidation

    Bachmaier, A. & Pippan, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  69. Published

    Nano-Massstab: Wie sich Kupfer unter Bestrahlung verformt: Der Standard Online

    Kiener, D., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  70. Published

    Neue Methode zur Prüfung bestrahlter Materialien auf der Nano-Ebene: Leobennews

    Kiener, D., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  71. Published

    New insights on the small-scale mechanical behavior: simulation and experiments

    Motz, C., 2011

    Research output: Thesis › Habilitation thesis › peer-review

  72. Published

    nfluence of impurities and deformation temperature on the saturation microstructure and ductility of HPT - deformed nickel

    Rathmayr, G. & Pippan, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    Numerische Analyse der Martensit Morphologie in nanokristallinen NiTi Legierungen

    Pranger, W., 2011, 99 p.

    Research output: Thesis › Diploma Thesis

  74. Published

    On the brittle fracture of tungsten and tungsten alloys and its impact on the material´s usage for fusion applications

    Wurster, S., Gludovatz, B. & Pippan, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    On the mechanism of fatigue crack propagation in ductile metallic materials

    Pippan, R., Zelger, C., Gach, E., Bichler, C. & Weinhandl, H., 2011, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Physical Metallurgy and Properties of ß-solidifying TiAl Based Alloys

    Clemens, H., Schmölzer, T., Schloffer, M., Schwaighofer, E., Mayer, S. & Dehm, G., 2011, Materials Research Society symposium proceedings Volume 1295. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Plasticity at the Micron Scale: A µLaue Study

    Kirchlechner, C., 2011, 72 p.

    Research output: Thesis › Doctoral Thesis

  78. Published

    Polymers characterized using in-situ laboratory saxs/waxs coupled with mechanical tests

    Feuchter, M., Keckes, J. & Maier, G. A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    Prüfung bestrahlter Materialien auf Nano-Ebene: wanted.tc

    Kiener, D., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  80. Published

    RCF and wear in theory and practice — The influence of rail grade on wear and RCF

    Stock, R. & Pippan, R., 2011, In: Wear. p. 125-133

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Recrystallization and Grain Growth in Ultrafine-Grained Materials Produced by High Pressure Torsion

    Khorashadizadeh, A., Raabe, D., Winning, M.-F. & Pippan, R., 2011, In: Advanced engineering materials. p. 245-250

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Recrystallization kinetics of ultrafine-grained Ni studied by dilatometry

    Oberdorfer, B., Steyskal, E. M., Sprengel, W., Pippan, R., Zehetbauer, M. A., Puff, W. & Würschum, R., 2011, In: Journal of alloys and compounds. p. 309-311

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Review on the EFDA programme on tungsten materials technology and science

    Rieth, M., Boutard, J. L., Dudarev, S. L., Ahlgren, T., Antusch, T., Baluc, N., Barthe, M.-F., Bequart, C. S., Ciupinski, L., Correia, J. B., Domain, C., Fikar, J., Fortuna, E., Fu, C.-C., Gaganidze, E., Galán, T. L., García-Rosales, C., Gludovatz, B., Greuner, C. & Heinola, K. & 33 others, Holstein, N., Juslin, N., Koch, F., Krauss, W., Kurzydlowski, K. J., Linke, P. J., Linsmeier, C., Luzginova, N., Maier, H., Martínez, M. S., Missiaen, J. M., Muhammed, M., Munoz, A., Muzyk, M., Nordlund, K., Nguyen-Manh, D., Norajitra, P., Opschoor, J., Pintsuk, G., Pippan, R., Ritz, G., Romaner, L., Rupp, D., Schäublin, R., Schlosser, J., Uytdenhoven, I., van der Laan, J. G., Veleva, L., Ventelon, L., Wahlberg, S., Willaime, F., Wurster, S. & Yar, M. A., 2011, In: Journal of nuclear materials. 417, 1, p. 463-367

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Significance of temperature increase in processing by high-pressure torsion

    Edalati, K., Miresmaeili, R., Horita, Z., Kanayama, H. & Pippan, R., 2011, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 7301-7305

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model

    Daniel, R., Holec, D., Bartosik, M., Keckes, J. & Mitterer, C., 2011, In: Acta materialia. 59, p. 6631-6645

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Source controlled yield and hardening of Cu(100) studied by in situ transmission electron microscopy

    Kiener, D. & Minor, A. M., 2011, In: Acta materialia. 59, p. 1328-1337

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Source Truncation and Exhaustion: Insights from Quantitative in situ TEM Tensile Testing

    Kiener, D. & Minor, A. M., 2011, In: Nano Letters. 11, p. 3816-3820

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Stress design of hard coatings

    Daniel, R., Keckes, J. & Mitterer, C., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Synchrotron X-Ray Nanobeam Experimente an CrN-Schichten zur Bestimmung von Mikrostrukturgradienten

    Lehner, A., 2011, 57 p.

    Research output: Thesis › Diploma Thesis

  90. Published

    Temperaturabhängige mechanische Eigenschaften miniaturisierter Kupferstrukturen aus der Leistungshalbleiterelektronik

    Smolka, M., 2011, 166 p.

    Research output: Thesis › Doctoral Thesis

  91. Published

    Temperature induced structural gradients in multilayer coatings revealed by position resolved XRR and GISAXS

    Maier, G., Kreith, J., Chitu, L., Siffalovic, P., Michaelsen, C. & Keckes, J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    The effect of film thickness variations in peridic cracking: Analysis and experiments

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1830-1836

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    The Effect of Severe Plastic Deformation on the Fatigue Behaviour of an Austenitic Stainless Steel

    Renk, O., Hohenwarter, A., Scheriau, S., Kleber, S. & Pippan, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    The effect of severe plastic deformation on the fatigue behaviour of an austenitic steel

    Renk, O., Hohenwarter, A., Scheriau, S., Kleber, S. & Pippan, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1855-1859

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    The microstructural break down: the effect of initial grain size

    Rehrl, C. R., 2011, 95 p.

    Research output: Thesis › Doctoral Thesis

  97. Published

    Time-dependent contact behavior between diamond and a CNT turf

    Qiu, A., Fowler, S. P., Jiao, J., Kiener, D. & Bahr, D. F., 2011, In: Nanotechnology. 22, p. 295702-1-7

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Towards predictive modeling of near-edge structures in electron energy-loss spectra of AlN-based ternary alloys

    Holec, D., Rachbauer, R., Kiener, D., Cherns, P. D., Costa, P. M. F. J., McAleese, C., Mayrhofer, P. H. & Humphreys, C. J., 2011, In: Physical review : B, Condensed matter and materials physics. 83, p. 165122-1-165122-10

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Towards reliable modelling of ELNES of AlxGa1-xN and other AlN based ternary alloys

    Holec, D., Rachbauer, R., Kiener, D., Cherns, P. D., Costa, P. M. F. J., Mayrhofer, P. H. & Humphreys, C. J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  100. Published

    Ultrafine Structure Formation in Aluminium Alloy Processed by HPT and the Mechanical Properties Response

    Zrník, J., Pippan, R., Scheriau, S. & Fujda, M., 2011, In: Materials Science Forum . p. 903-908

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Ultrasonic Evaluation of Severely Plastically Deformed Metals

    Krenn, H. & Pippan, R., 2011, Key engineering materials. p. 374-377 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  102. Published

    Uniaxial Straining of Brittle Film/Compliant Substrate Systems

    Taylor, A., 2011

    Research output: Thesis › Doctoral Thesis

Previous 1...10 11 12 13 14 15 16 17 ...20 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112