Chair of Functional Materials and Materials Systems (425)

Organisational unit: Chair

601 - 650 out of 682Page size: 50

Research output

  1. 2012
  2. Published

    Comparative study of Y-doping and Cr-Alloying of AlTiTaN-based quaternary nitride

    Girault, B., Khetan, V., Valle, N., Chemin, J.-B., Duday, D., Choquet, P., Michotte, C., Penoy, M., Mitterer, C. & Delplancke, M.-P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Design and architecture of functional materials systems

    Daniel, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Duplex processing for increased adhesion of sputter deposited Ti1-xAlxN coatings on a Fe-25%Co-15%Mo tool material

    Weirather, T., Fian, A., Sartory, B., Caliskanoglu, D., Kölker, W. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 3601-3606

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Effect of Hf on structure and age hardening of Ti-Al-N thin films

    Rachbauer, R., Blutmager, A., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2667-2672

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Effects of structure and phase transformation on fracture toughness and mechanical properties of CrN/AIN multilayers

    Schlögl, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Elasticity in binary and ternary transition metal nitrides

    Holec, D., Wagner, P., Friak, M. & Mayrhofer, P. H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Electronic origin of structure and mechanical properties in Y and Nb alloyed Ti-Al-N thin films

    Holec, D., Rachbauer, R., Lattemann, M., Hultman, L., Paulitsch, J. & Mayrhofer, P. H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Functional Materials and Materials Systems

    Mitterer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Increased thermal stability of Ti-Al-N thin films by Ta alloying

    Rachbauer, R., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 211, p. 98-103

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings

    Schalk, N., Mitterer, C., Keckes, J., Penoy, M. & Michotte, C., 2012, In: Surface & coatings technology. 209, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Influence of the bilayer period on the structure of AlN and the mechanical properties of CrN/AlN superlattice coatings

    Mayer, B., 2012, 50 p.

    Research output: Thesis › Diploma Thesis › peer-review

  13. Published

    Influence of the N2 partial pressure on structure and properties of Zr1-xAlxN thin films

    Sonnleitner, D., Paulitsch, J., Polcik, P. & Mayrhofer, P. H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Interfacial coherency stress distribution in TiN/AlN bilayer and multilayer films studied by FEM analysis

    Chawla, V., Holec, D. & Mayrhofer, P. H., 2012, In: Computational materials science. 55, p. 211-216

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal

    Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Low friction CrNMPP/TiNDCMS multilayer coatings

    Paulitsch, J., Maringer, C. & Mayrhofer, P. H., 2012, In: Tribology Letters. 65, p. 87-93

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Mesure de la conductivite thermique des couches de CrN par deux techniques de radiometrie photothermique

    Battaglia, J.-L., Martan, J., Kusiak, A. & Daniel, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Mesure de la conductivite thermique d'une couche de CrN par deux techniques de radiometrie photothermique

    Battaglia, J.-L., Martan, J., Kusiak, A. & Daniel, R., 2012, Congres francais de thermique. p. 108-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Microstructure and mechanical properties of nanocrystalline Al-Cr-B-N thin films

    Tritremmel, C., Daniel, R., Lechthaler, M., Rudigier, H., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 213, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Microstructure modifications of CrN coatings by pulsed bias sputtering

    Grasser, S., Daniel, R. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 4666-4671

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Multilayer Design for Increased Toughness of CrN-based Coatings

    Schlögl, M., 2012, 71 p.

    Research output: Thesis › Doctoral Thesis

  22. Published

    Oxidation behavior of arc evaporated Al-Cr-Si-N thin films

    Tritremmel, C., Daniel, R., Mitterer, C., Mayrhofer, P. H., Lechthaler, M. & Polcik, P., 2012, In: Journal of vacuum science & technology / A (JVST). 30, p. 061501-1-061501-6

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Oxidation behaviour and tribological properties of arc-evaporated ZrAlN hard coatings

    Franz, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 2337-2345

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Phase Stability and Mechanical Properties of Yttrium alloyed Ti-Al-N Thin Films

    Riedl, H., 2012

    Research output: Thesis › Diploma Thesis

  25. Published

    Phase stability, mechanical properties and thermal stability of y alloyed Ti-Al-N thin films

    Riedl, H., Hollerweger, R., Rachbauer, R., Polcik, P., Paulitsch, J. & Mayrhofer, P. H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    PVD TiAlN/CrAlN Multilayer Systems for Cutting Applications

    Teppernegg, T., 2012, 61 p.

    Research output: Thesis › Diploma Thesis

  27. Published

    Reduced friction, weight and size of mechanical systems by tailor made coatings and lubrication

    Eitzinger, G., Zorn, K., Jantschner, O. & Mitterer, C., 2012, Proceedings JSAE Annual Congress. p. 17-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Silver nanoparticles sintering at low temperature on a copper substrate: In situ characterisation under inert atmosphere and air

    Zalesak, J., 2012, In: Journal of Mining and Metallurgy, Section B: Metallurgy. 48, 1, p. 63-71 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Structural and tribological properties of CrN/TiN multilayer coatings

    Paulitsch, J., Holec, D. & Mayrhofer, P. H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Surface energies of AlN allotropes from first principles

    Holec, D. & Mayrhofer, P. H., 2012, In: Scripta materialia. 67, p. 760-762

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Synthesis of functional thin films and process characterisation

    Franz, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    The alloying effect for CrN coatings from ab initio calculations

    Zhou, L., Holec, D. & Mayrhofer, P. H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Thermal stability and oxidation resistance of Ti-Al-N coatings

    Chen, L., Paulitsch, J., Du, Y. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2954-2960

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Thermal stability and oxidation resistance of Ti-Al-N/Ta-Al-N multilayer coatings

    Koller, C., Hollerweger, R., Rachbauer, R., Arndt, M., Polcik, P., Paulitsch, J. & Mayrhofer, P. H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Thermal stability and oxidation resistance of Ti-Al-N/Ta-Al-N multilayer coatings

    Koller, C., 2012

    Research output: Thesis › Diploma Thesis

  36. Published

    TiO2 (100) Al2O3 (0001) interface: A first-principles study supported by experiment

    Popov, M., Spitaler, J., Mühlbacher, M., Walter, C., Keckes, J., Mitterer, C. & Draxl, C., 2012, In: Physical review : B, Condensed matter and materials physics. 86, p. 2053091-20530913

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Trends in the elastic response of binary early transition metal nitrides

    Holec, D., Friak, M., Neugebauer, J. & Mayrhofer, P. H., 2012, In: Physical review : B, Condensed matter and materials physics. 85, p. 0641011-0641019

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Tribological properties of Al2O3 hard coatings modified by mechanical blasting and polishing post-treatment

    Riedl, A., Schalk, N., Czettl, C., Sartory, B. & Mitterer, C., 2012, In: Wear. 289, p. 9-16

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Tribological properties of arc-evaporated NbAIN hard coatings

    Franz, R., Lechthaler, M., Polcik, P., Rebelo De Figueiredo, M. & Mitterer, C., 2012, In: Tribology Letters. 52, p. 143-152

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G. A., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S. & Burghammer, M., 2012, In: Scripta materialia. 67, p. 748-751

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2011
  42. Published

    A comparative study on Ti1-xAlxN coatings reactively sputtered from compound and from mosaic targets

    Schalk, N., Weirather, T., Polzer, C., Polcik, P. & Mitterer, C., 2011, In: Surface & coatings technology. 205, p. 4705-4710

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Age Hardening in Transition Metal Aluminium Nitride Thin Films Studied at the Atomic Scale

    Rachbauer, R., 2011, 58 p.

    Research output: Thesis › Doctoral Thesis

  44. Published

    Atomic and electronic structures of a transition layer at the CrN/Cr interface

    Zhang, Z., Daniel, R. & Mitterer, C., 2011, In: Journal of applied physics. 110, p. 043524-1-043524-4

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Cathodic arc deposition of (Al,Cr)2O3: Macroparticles and cathode surface modifications

    Pohler, M., Franz, R., Ramm, J., Polic, P. & Mitterer, C., 2011, In: Surface & coatings technology. 206, p. 1454-1460

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    CO addition in low-pressure chemical vapour deposition of medium-temperature TiCxN1-x based hard coatings

    Czettl, C., Mitterer, C., Mühle, U., Rafaja, D., Puchner, S., Hutter, H., Penoy, M., Michotte, C. & Kathrein, M., 2011, In: Surface & coatings technology. 206, p. 1691-1697

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Comparative studies of the CrN-Cr-Si an d CrN-Si interfaces by Cs-corrected HRTEM and STEM-EELS

    Zhang, Z., Daniel, R. & Mitterer, C., 2011, Proceeding of Multinational Congress on Microscopy. p. 29-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Composition, microstructure and mechanical properties of boron containing multilayer coatings for hot forming tools

    Paschke, H., Stüber, M., Ziebert, C., Bistron, M. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 205, p. 24-28

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Concept for optimized coating design and architecture

    Daniel, R. & Mitterer, C., 2011, Abstract International conference on Potential and Applications of Thin Ceramic and Metal Coatings. p. 37-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Development of hard coatings for press hardening processes

    Maringer, C., 2011, 73 p.

    Research output: Thesis › Diploma Thesis

  51. Published

    Effects of thermal annealing on the microstructure of sputtered Al2O3 coatings

    Edlmayr, V., Harzer, T. P., Hoffmann, R., Kiener, D., Scheu, C. & Mitterer, C., 2011, In: Journal of vacuum science & technology / A (JVST). p. 0415061-0415068

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Elasticity in Binary and Ternary Transition Metal Nitrides

    Holec, D., Wagner, P. & Mayrhofer, P. H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...9 10 11 12 13 14 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben
  • Main phone number: +43 3842 402 4201