Chair of Functional Materials and Materials Systems (425)

Organisational unit: Chair

501 - 550 out of 682Page size: 50

Research output

  1. 2014
  2. E-pub ahead of print

    Complementary ab initio and X-ray nanodiffraction studies of Ta2 O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayerhofer, P. H., 30 Oct 2014, (E-pub ahead of print) In: Acta materialia. 83.2015, 15 January, p. 276-284 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

    Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C. & Keckes, J., 28 May 2014, In: Journal of applied physics. 115, 20, 203507.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Macroscopic fracture behaviour of CrN hard coatings evaluated by X-ray diffraction coupled with four-point bending

    Stefenelli, M., Riedl, A., Todt, J., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 1 Jan 2014, Materials Science Forum. Vol. 768-769. p. 272-279 8 p. (Materials Science Forum; vol. 768-769).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    60. Metallkunde Jubiläumskolloquium - Abstractband

    Mitterer, C. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  6. Published

    Ab initio studies on the adsorption and adhesive transfer of Al and Fe to nitride coatings materials

    Riedl, H., Zalesak, J., Sobiech, M., Polcik, P., Holec, D. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    An optimized biaxial stress temperature measurement for TiAlN based hard coatings

    Saringer, C., 2014

    Research output: Thesis › Diploma Thesis

  9. Published

    Antibacterial films for medical applications grown by atmospheric pressure plasma deposition

    Jäger, E., 2014, 41 p.

    Research output: Thesis › Diploma Thesis

  10. Published

    Asymmetric particle fluxes from drifting ionization zones in sputtering magnetrons

    Panjan, M., Franz, R. & Anders, A., 2014, In: Plasma sources science & technology. 23, p. 0250071-02500712

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Controlled functionality of thin films through advanced microstructural design

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Crossover of texture and morphylogy in (Ti1-xAlx)1 - yYyN alloy films and the pathway of structure evolution

    Szekely, L., Safran, G., Kis, V., Horvat, Z. E., Mayrhofer, P. H., Moser, M., Radnoczi, G., Misjak, F. & Barna, P. B., 2014, In: Surface & coatings technology. 257, p. 3-14

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Cu diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001) by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Enhancement of the thermal stability of sputtered diamond-like carbon thin films for automotive applications

    Jantschner, O., 2014

    Research output: Thesis › Doctoral Thesis

  16. Published

    Fracture toughness enhancement of thin films by advanced microstructural design and architecture - Examples of bio-inspired model soft-hard crystalline-amorphous coating systems

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    Funktionale Schichten für das Automobil

    Mitterer, C., Saringer, C., Franz, R., Jantschner, O., Terziyska, V. & Daniel, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Funktionale Schichten in der µ-Elektronik

    Mitterer, C., Franz, R., Jachs, C., Hofer, A. M., Jörg, T., Pachlhofer, J. & Mühlbacher, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Funktionale Werkstoffe und Werkstoffsysteme

    Mitterer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Hartstoffschichten

    Mitterer, C., Terziyska, V., Großmann, B., Zeilinger, A., Hirn, S., Tkadletz, M., Gassner, M. & Schalk, N., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Herstellung von Ti-Al-O-N-Schichten mittels reaktivem Magnetron-Sputterprozess

    Simonet Fotso, J., 2014

    Research output: Thesis › Diploma Thesis

  22. Published

    Increased thermal stability of Ti1-xAlxN/TiN multilayer coatings through high temperature sputter deposition on powder-metallurgical high-speed steels

    Weirather, T., Chladil, K., Sartory, B., Caliskanoglu, D., Cremer, R., Kölker, W. & Mitterer, C., 2014, In: Surface & coatings technology. 257, p. 48-57

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of microstructure on diffusion barrier properties of TiN investigated by TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Lu, J., Schalk, N., Lars, H. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    Influence of Si on the target oxide poisoning during reactive arc evaporation of (Al,Cr)2O3 coatings

    Paulitsch, J., Rachbauer, R., Ramm, J., Polcik, P. & Mayrhofer, P. H., 2014, In: Vacuum. 100, p. 29-32

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Influence of Tantalum on structure, electrical resistivity and corrosion behavior of sputtered molybdenum films

    Hofer-Roblyek, A. M., Reinfried, N., Mori, G., Winkler, J. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. Published

    Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction

    Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C. & Mitterer, C., 2014, In: Surface & coatings technology. 258, p. 121-126

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Mechanical and tribological properties of Al - Ti - N/Al - Cr - B -N multilayer films synthesized by cathodic arc evaporation

    Tritremmel, C., Daniel, R., Rudigier, H., Pocik, P. & Mitterer, C., 2014, In: Surface & coatings technology. 246, p. 57-63

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Microstructural and stress design of thin films - The journey from nitrides to oxides, from nanocrystalline to amorphous materials

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  30. Published

    Microstructure-related depth-gradients of mechanical properties in thin nanocrystalline films

    Daniel, R., Zalesak, J., Mitterer, C., Riedl, A., Sartory, B., Keckes, J. & Schöberl, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    Novel nanocomposite coatings: Advances and industrial applications

    Daniel, R. & Musil, J., 2014

    Research output: Book/Report › Book › Research

  32. Published

    Observation of multiple charge states and high ion energies in high-power impulse magnetron sputtering (HiPIMS) and burst HiPIMS using a LaB6 target

    Franz, R., Clavero, C., Bolat, R., Mendelsberg, R. & Anders, A., 2014, In: Plasma sources science & technology. 23, p. 0350011-03500111

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Oxidation and Wet Etching Behavior of Sputtered Ternary Molybdenum Alloy Thin Films

    Jörg, T., 2014

    Research output: Thesis › Diploma Thesis

  34. Published

    Oxidation and wet etching behavior of sputtered ternary molybdenum films

    Jörg, T., Hofer-Roblyek, A. M., Winkler, J., Mitterer, C. & Köstenbauer, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Protective transition metal nitride coatings

    Mayrhofer, P. H., Rachbauer, R., Holec, D., Rovere, F. & Schneider, J., 2014, Comprehensive Materials Proceedings. p. 355-388

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  36. Published

    PVD and CVD Hard Coatings

    Mitterer, C., 2014, Comprehensive Hard Materials. p. 449-467

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. Published

    Seed layer stimulated growth of crystalline high Al containing (Al,Cr)2O3 coatings deposited by cathodic arc evaporation

    Pohler, M., Franz, R., Ramm, J., Polcik, P. & Mitterer, C., 2014, In: Thin solid films. 550, p. 95-104

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Self-adaptive lubrication mechanisms in hard coatings for different temperature regimes

    Franz, R. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Sputtered molybdenum films: structure and property evolution with film thickness

    Hofer, A. M., Schlacher, J., Keckes, J., Winkler, J. & Mitterer, C., 2014, In: Vacuum. 99, p. 149-152

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Sputtered Si-containing low-friction carbon coatings for elevated temperatures

    Jantschner, O., Field, S. K., Music, D., Terziyska, V., Schneider, J. M., Munnik, F., Zorn, K. & Mitterer, C., 2014, In: Tribology International. 77, p. 15-23

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Strategies for fracture toughness enhancement of thin films by advanced microstructural design - Examples of bio-inspired model soft-hard crystalline -amorphous coatings systems

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Structural and mechanical evolution of reactively and non-reactively sputterd Zr-Al-N thin films during annealing

    Mayrhofer, P. H., Sonnleitner, D., Bartosik, M. & Holec, D., 2014, In: Surface & coatings technology. 244, p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Substitution of ThO2 by La2O3 additions in tungsten electrodes for atmospheric plasma spraying

    Heißl, M., Mitterer, C., Granzer, T., Schröder, J. & Kathrein, M., 2014, In: International journal of refractory metals & hard materials. 43, p. 181-185

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

    Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Synthesis-Structure-Property Relations in Nanostructured Thin Films Determined by Local Characterization Techniques

    Zeilinger, A., 2014

    Research output: Thesis › Doctoral Thesis

  46. Published

    Temperature-dependent wear mechanisms for magnetron sputtered AlTiTaN hard coatings

    Khetan, V., Valle, N., Duday, D., Michotte, C., Mitterer, C., Delplancke, M.-P. & Choquet, P., 2014, In: ACS Applied Materials & Interfaces. 6, p. 15403-15411

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior

    Tkadletz, M., Mitterer, C., Sartory, B., Letovsky-Papst, I., Czettl, C. & Michotte, C., 2014, In: Surface & coatings technology. 257, p. 95-101

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Thermal stability and oxidation behavior of magnetron sputtered Mo-Si-B Thin films

    Vieweg, A., 2014

    Research output: Thesis › Diploma Thesis

  49. Published

    Thermal Stability of Alumina-based Hard Coatings

    Edlmayr, V., 2014

    Research output: Thesis › Doctoral Thesis

  50. Published

    Volle Leistung mit weniger Energie

    Mitterer, C. & Waldhauser, W., 2014, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. p. 26-27

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Zr-, Hf-, W- and Mo-alloyed Ti-Al hard coatings for high temperature cutting

    Kaindl, R., Waldhauser, W., Terziyska, V., Mitterer, C., Neubauer, E., Kitzmantel, M. & Köpf, A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...7 8 9 10 11 12 13 14 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben
  • Main phone number: +43 3842 402 4201