Research output

1 - 477 out of 477Page size: 500
rss feed
  1. 2024
  2. E-pub ahead of print

    A sequential lumped kinetic modelling approach for the co-pyrolysis of plastic mixtures with a heavy refinery intermediate product in a tubular reactor

    Lorbach, S-M., Lechleitner, A., Schubert, T. & Lehner, M., 10 Apr 2024, (E-pub ahead of print) In: Reaction chemistry & engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    High-capacity CO/CO2 methanation reactor design strategy based on 1D PFR modelling and experimental investigation

    Krammer, A., Salbrechter, K. & Lehner, M., Feb 2024, In: Journal of CO2 utilization. 80.2024, February, 21 p., 102661.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2023
  5. E-pub ahead of print

    Feasibility of a Plasma Furnace for Methane Pyrolysis: Hydrogen and Carbon Production

    Daghagheleh, O., Schenk, J., Zarl, M. A., Lehner, M., Farkas, M. & Zheng, H., 26 Dec 2023, (E-pub ahead of print) In: Energies. 17.2024, 1, 16 p., 167.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    The Behavior of Phosphorus in the Hydrogen-Based Direct Reduction—Smelter Ironmaking Route

    Pfeiffer, A., Thiele, K., Zheng, H., Mali, H., Wimmer, G. & Schenk, J., 27 Oct 2023, (E-pub ahead of print) In: Steel research international. 2024 ??? Stand: 3. April 2024, ??? Stand: 3. April 2024, 9 p., 2300268.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Comparison and techno-economic evaluation of process routes for lower olefin production via Fischer–Tropsch and methanol synthesis

    Markowitsch, C., Lehner, M. & Maly, M., 22 Sept 2023, (E-pub ahead of print) In: International Journal of Greenhouse Gas Control. 129.2023, October, 17 p., 103985.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Investigation of the Impact of Biochar Application on Foaming Slags with Varied Compositions in Electric Arc Furnace-Based Steel Production

    Kieush, L. & Schenk, J., Aug 2023, In: Energies. 16.2023, 17, 29 p., 6325.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Prediction of Sinter Chemical Composition Based on Ensemble Learning Algorithms

    Niu, L., Liu, Z., Zhang, J., Sun, Q., Schenk, J., Wang, J. & Wang, Y., 26 Jul 2023, In: Journal of Sustainable Metallurgy. 9.2023, 3, p. 1168-1179 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Properties of liquid CaO–SiO2 and CaO–SiO2-‘Fe2O3’tot slags measured by a combination of maximum bubble pressure and rotating bob methods

    Cheremisina, E., Kovtun, O., Yehorov, A., Volkova, O. & Schenk, J., 27 Jun 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 18, p. 30104-30114 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Evaluation of Slag Foaming Behavior Using Renewable Carbon Sources in Electric Arc Furnace-Based Steel Production

    Kieush, L., Schenk, J., Koveria, A., Hrubiak, A., Hopfinger, H. & Zheng, H., 12 Jun 2023, In: Energies. 16.2023, 12, 25 p., 4673.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Automated detection of loading and flooding points in packed columns

    Haushofer, G., Schlager, M., Wolf-Zöllner, V. M. & Lehner, M., 8 Jun 2023, In: Transactions of the Institution of Chemical Engineers / A, Chemical engineering research and design . 196.2023, August, p. 61-70 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    The Behavior of Direct Reduced Iron in the Electric Arc Furnace Hotspot

    Pfeiffer, A., Ernst, D., Zheng, H., Wimmer, G. & Schenk, J., 18 May 2023, In: Metals. 13.2023, 5, 12 p., 978.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Modeling the Residence Time of Metal Droplets in Slag During BOF Steelmaking

    Mitas, B., Visuri, V. V. & Schenk, J., 17 May 2023, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, August, p. 1938–1953 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Evaluation and Comparison of the Conventional and Renewable-based Polyolefin Production based on Greenhouse Gas Reduction

    Markowitsch, C. & Lehner, M., 13 Apr 2023.

    Research output: Contribution to conference › Paper

  16. Published

    Einfluss der Betriebsbedingungen auf die reverse Wasser Gas Shift Reaktion

    Markowitsch, C. & Lehner, M., 12 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Utilization of Renewable Carbon in Electric Arc Furnace-Based Steel Production: Comparative Evaluation of Properties of Conventional and Non-Conventional Carbon-Bearing Sources

    Kieush, L., Schenk, J., Koveria, A., Rantitsch, G., Hrubiak, A. & Hopfinger, H., 6 Apr 2023, In: Metals. 13.2023, 4, 16 p., 722.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Evaluation of Process Structures and Reactor Technologies of an integrated Power-to-Liquid Plant at a Cement Factory

    Markowitsch, C., Lehner, M. & Maly, M., Apr 2023, In: Journal of CO2 utilization. 70.2023, April, 14 p., 102449.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Preparation of Micro-Electrolytic Iron-Carbon Filler for Sewage by Recycling Metallurgical Dust

    Xu, R., Zhang, Y., Huang, X., Cao, M., Yu, J., Zhang, J., Zheng, H. & Schenk, J., 29 Mar 2023, In: Metals. 13.2023, 4, 16 p., 673.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Phase Transition of Magnetite Ore Fines During Oxidation Probed by In Situ High-Temperature X-Ray Diffraction

    Zheng, H., Daghagheleh, O., Ma, Y., Taferner, B., Schenk, J. & Kapelyushin, Y., 13 Mar 2023, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, 3, p. 1195-1204 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Impact of Iron Ore Pre-Reduction Degree on the Hydrogen Plasma Smelting Reduction Process

    Ernst, D., Manzoor, U., Souza Filho, I. R., Zarl, M. A. & Schenk, J., 10 Mar 2023, In: Metals. 13.2023, 3, 18 p., 558.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Mass transfer model of packed seawater scrubbers for marine exhaust gas cleaning

    Schlager, M., Baumfrisch, M., Haushofer, G., Wolf-Zöllner, V. & Lehner, M., 20 Feb 2023, (E-pub ahead of print) In: Chemical Engineering Research and Design. 192.2023, April, p. 128-140 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Effects of the Electrodes’ Shape and Graphite Quality on the Arc Stability During Hydrogen Plasma Smelting Reduction of Iron Ores

    Ernst, D., Zarl, M. A., Farkas, M. A. & Schenk, J., 9 Feb 2023, (E-pub ahead of print) In: Steel research international. 94.2023, 7, 12 p., 2200818.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Parameter Optimization for Hydrogen-Induced Fluidized Bed Reduction of Magnetite Iron Ore Fines

    Zheng, H., Schenk, J., Daghagheleh, O. & Taferner, B., 8 Feb 2023, In: Metals. 13.2023, 2, 10 p., 339.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Co-solid oxide electrolysis and methanation

    Krammer, A. & Lehner, M., 2023, High-Temperature Electrolysis: From fundamentals to applications. IOP Publishing Ltd., p. 15-1 to 15-26 (2053-2563).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    The influence of prior-oxidation on the reducibility and fluidization performance of magnetite iron ore

    Zheng, H., 2023

    Research output: Thesis › Doctoral Thesis

  27. 2022
  28. Published

    Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges Recycling

    Dworak, S., Fellner, J., Beermann, M., Häuselmann, M., Schenk, J., Michelic, S. K., Cejka, J., Sakic, A., Mayer, J. & Steininger, K., 25 Nov 2022, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 75.2023, Februar, p. 97-107 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    A Comprehensive Review of Secondary Carbon Bio-Carriers for Application in Metallurgical Processes: Utilization of Torrefied Biomass in Steel Production

    Kieush, L., Rieger, J., Schenk, J., Brondi, C., Rovelli, D., Echterhof, T., Cirilli, F., Thaler, C. M., Jaeger, N., Snaet, D., Peters, K. & Colla, V., 23 Nov 2022, In: Metals. 12.2022, 12, 38 p., 2005.

    Research output: Contribution to journal › Review article › peer-review

  30. Published

    Fluidization behavior and reduction kinetics of pre-oxidized magnetite-based iron ore in a hydrogen-induced fluidized bed

    Zheng, H., Daghagheleh, O., Wolfinger, T., Taferner, B., Schenk, J. & Xu, R., 22 Oct 2022, In: International Journal of Minerals, Metallurgy and Materials. 29.2022, 10, p. 1873-1881 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Hydrogen plasma smelting reduction process monitoring with optical emission spectroscopy – Establishing the basis for the method

    Pauna, H., Ernst, D., Zarl, M., Aula, M., Schenk, J., Huttula, M. & Fabritius, T., 20 Oct 2022, In: Journal of Cleaner Production. 372, 12 p., 133755.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Density, viscosity and surface tension of high-silicate CaO–SiO2 and CaO–SiO2–Fe2O3 slags derived by aerodynamic levitation. The behavior of Fe3+ in high-silicate melts

    Cheremisina, E., Zhang, Z., de Bilbao, E. & Schenk, J., 2 Oct 2022, (E-pub ahead of print) In: Ceramics International. 49.2023, 3, p. 4460-4472 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Processing low grade Direct Reduced Iron – Definition and comparison of melting strategies

    Pfeiffer, A., Schenk, J., Wimmer, G. & Wurm, J., Oct 2022, 9th EOSC & 6th CTSI.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Tri-Reforming of Methane: Thermodynamics, Operating Conditions, Reactor Technology and Efficiency Evaluation—A Review

    Soleimani, S. & Lehner, M., 28 Sept 2022, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 15.2022, 19, 42 p., 7159.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Gasification Behaviors of Ferrocoke With and Without Water Vapor

    Xu, R., Deng, S., Zheng, H., Huang, X., Daghagheleh, O., Schenk, J., Zhang, J. & Zhu, J., 25 Sept 2022, In: Steel research international. 93.2022, 11, 12 p., 2200575.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Long-Term Reoxidation of Hot Briquetted Iron in Various Prepared Climatic Conditions

    Daghagheleh, O., Schenk, J., Zheng, H., Taferner, B., Forstner, A. & Rosenfellner, G., 23 Sept 2022, (E-pub ahead of print) In: Steel research international. 94.2023, 1, 7 p., 2200535.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Further Development of the Guideline for Standardized Characterization Measurements of Packed Columns

    Triebl, A., Schlager, M., Haushofer, G., Wolf-Zoellner, V. & Lehner, M., 19 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  38. E-pub ahead of print

    Assessment of the dissolution rate and behaviour of raw dolomite and limestone with different calcination degrees in primary steelmaking slags

    Cheremisina, E., Lesiak, S., Rieger, J., Schenk, J., Firsbach, F., Johnson, W., Chopin, T. & Nispel, M., 15 Sept 2022, (E-pub ahead of print) In: Ironmaking and steelmaking. 50.2023, 4, p. 379-391 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Editorial for special issue on hydrogen metallurgy

    Zhang, J., Schenk, J., Liu, Z. & Li, K., 22 Aug 2022, (E-pub ahead of print) In: International Journal of Minerals, Metallurgy and Materials. 29.2022, 10, p. 1817-1819 3 p.

    Research output: Contribution to journal › Editorial › peer-review

  40. Published

    Investigations on the Interaction Behavior between Direct Reduced Iron and Various Melts

    Pfeiffer, A., Wimmer, G. & Schenk, J., 18 Aug 2022, In: Materials. 15.2022, 16, 14 p., 5691.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Mathematical Modeling of the Ejected Droplet Size Distribution in the Vicinity of a Gas–Liquid Impingement Zone

    Mitas, B., Visuri, V. V. & Schenk, J., 16 Aug 2022, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 53.2022, October, p. 3083–3094 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Application-based catalytic methanation of steelworks gases under dynamic operating conditions

    Wolf-Zöllner, P., Lehner, M. & Kieberger, N., 14 Aug 2022, In: Journal of Cleaner Production. 371.2022, 15 October, 11 p., 133570.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Investigation into the Effect of Multi-Component Coal Blends on Properties of Metallurgical Coke via Petrographic Analysis under Industrial Conditions

    Kieush, L., Koveria, A., Schenk, J., Rysbekov, K., Lozynskyi, V., Zheng, H. & Matayev, A., 11 Aug 2022, In: Sustainability (Switzerland). 14.2022, 16, 21 p., 9947.

    Research output: Contribution to journal › Article › Research › peer-review

  44. E-pub ahead of print

    Determination of volumetric mass transfer coefficients of structured packings at two different column diameters

    Schlager, M., Haushofer, G., Triebl, A. M., Wolf-Zoellner, V. & Lehner, M., 5 Aug 2022, (E-pub ahead of print) In: Chemical Engineering Research and Design. 186.2022, October, p. 462-472 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    A New Methodological Approach to the Characterization of Optimal Charging Rates at the Hydrogen Plasma Smelting Reduction Process Part 1: Method

    Zarl, M. A., Ernst, D., Cejka, J. & Schenk, J., 7 Jul 2022, In: Materials. 15.2022, 14, 23 p., 4767.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Economic Evaluation of Renewable Hydrogen Integration into Steelworks for the Production of Methanol and Methane

    Bampaou, M., Panopoulos, K., Seferlis, P., Sasiain, A., Haag, S., Wolf-Zöllner, P., Lehner, M., Rog, L., Rompalski, P., Kolb, S., Kieberger, N., Dettori, S., Matino, I. & Colla, V., 24 Jun 2022, In: Energies. 15.2022, 13, 26 p., 4650.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Sektorübergreifende Nutzung von Zementwerks-CO2 zur produktion von Polyolefinen

    Lehner, M. & Markowitsch, C., 23 Jun 2022, Energie aus Abfall. Thiel, S., Thomé-Kozmiensky, E., Quicker, P. & Gosten, A. (eds.). Neuruppin, Vol. 19. p. 266-279

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    A New Methodological Approach on the Characterization of Optimal Charging Rates at the Hydrogen Plasma Smelting Reduction Process Part 2: Results

    Ernst, D., Zarl, M. A., Cejka, J. & Schenk, J., 8 Jun 2022, In: Materials. 15.2022, 12, 22 p., 4065.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Using Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Mathematical Evaluation

    Wolfinger, T., Spreitzer, D. & Schenk, J., 1 Jun 2022, In: Materials. 15.2022, 11, 17 p., 3943.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    2D heterogeneous model of a polytropic methanation reactor

    Krammer, A., Peham, M. & Lehner, M., 27 May 2022, In: Journal of CO2 utilization. 62.2022, August, 17 p., 102059.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    70 Years of LD‐Steelmaking—Quo Vadis?

    Cappel, J., Ahrenhold, F., Egger, M. W., Hiebler, H. & Schenk, J., 26 May 2022, In: Metals. 12.2022, 6, 24 p., 912.

    Research output: Contribution to journal › Review article › peer-review

  52. Published

    Hierarchical nature of hydrogen-based direct reduction of iron oxides

    Ma, Y., Souza Filho, I. R., Bai, Y., Schenk, J., Patisson, F., Beck, A., van Bokhoven, J. A., Willinger, M. G., Li, K., Xie, D., Ponge, D., Zaefferer, S., Gault, B., Mianroodi, J. R. & Raabe, D., May 2022, In: Scripta Materialia. 213.2022, May, 7 p., 114571.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    C2PAT - Carbon To Product Austria / Poster

    Markowitsch, C. & Lehner, M., 22 Apr 2022.

    Research output: Contribution to conference › Poster › Research

  54. Published

    Renewable Gasfield - a holistic power-to-gas approach with PEM electrolysis und catalytic methanation

    Bernhard Mayr, Teresa Sieder & Klaus Neumann, 7 Apr 2022, Renewable Gasfield - a holistic power-to-gas approach with PEM electrolysis und catalytic methanation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Analysis of the Usability of Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Review

    Wolfinger, T., Spreitzer, D. & Schenk, J., 6 Apr 2022, In: Materials. 15.2022, 7, 15 p., 2687.

    Research output: Contribution to journal › Review article › peer-review

  56. E-pub ahead of print

    Surface Morphology and Structural Evolution of Magnetite-Based Iron Ore Fines During the Oxidation

    Zheng, H., Schenk, J., Xu, R., Daghagheleh, O., Spreitzer, D., Wolfinger, T., Yang, D. & Kapelyushin, Y., 23 Mar 2022, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 53.2022, 3, p. 1644-1660 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    C2PAT -Carbon To Product Austria

    Markowitsch, C. & Lehner, M., 18 Feb 2022.

    Research output: Contribution to conference › Paper

  58. Published

    Investigation on the influence of wood pellets on the reactivity of coke with CO2 and its microstructure properties

    Kieush, L., Schenk, J., Pfeiffer, A., Koveria, A., Rantitsch, G. & Hopfinger, H., 1 Feb 2022, In: Fuel. 309.2022, 1 February, 12 p., 122151.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Metallurgical Coke Production with Biomass Additives: Study of Biocoke Properties for Blast Furnace and Submerged Arc Furnace Purposes

    Bazaluk, O., Kieush, L., Koveria, A., Schenk, J., Pfeiffer, A., Zheng, H. & Lozynskyi, V., 1 Feb 2022, In: Materials. 15.2022, 3, 17 p., 1147.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Multidisciplinary Assessment of a Novel Carbon Capture and Utilization Concept including Underground Sun Conversion

    Zauner, A., Fazeni-Fraisl, K., Wolf-Zöllner, P., Holzleitner, M-T., Veseli, A., Lehner, M., Bauer, S. & Pichler, M., 29 Jan 2022, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 15.2022, 3, 30 p., 1021.

    Research output: Contribution to journal › Article › Research › peer-review

  61. E-pub ahead of print

    Calcination Condition of Dolomite-Based Materials Influencing Static Dissolution in Synthetic Electric Arc Furnace Slag

    Lesiak, S., Cheremisina, E., Rieger, J., Schenk, J., Firsbach, F., Johnson, W., Chopin, T. & Nispel, M., 12 Jan 2022, (E-pub ahead of print) In: Steel research international. 93.2022, 5, 9 p., 2100675.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    A Comprehensive Review of Characterization Methods for Metallurgical Coke Structures

    Zheng, H., Xu, R., Zhang, J., Daghagheleh, O., Schenk, J., Li, C. & Wang, W., 1 Jan 2022, In: Materials. 15.2022, 1, 24 p., 174.

    Research output: Contribution to journal › Review article › peer-review

  63. Published

    C2PAT - Carbon 2 Product Austria

    Markowitsch, C. & Lehner, M., 2022, ENINNOV 2022: 17. Symposium Energieinnovation - FUTURE OF ENERGY - Innovationen für eine klimaneutrale Zukunft. Graz, p. 284-285

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    C2PAT - Carbon To Product Austria

    Markowitsch, C. & Lehner, M., 2022, Energieforschungsgespräche Disentis 2022. Hediger, W. & Germann, N. (eds.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    How to increase scrap recycling

    Häuselmann, M., Rieger, J., Schenk, J., Schnitzer, R., Sakic, A., Michelic, S. K. & Cejka, J., 2022, In: Steel times international. 46.2022, 8*December, p. 34-38

    Research output: Contribution to journal › Article › Research

  66. Accepted/In press

    Impact of the Operation Conditions on the Reverse-Water-Gas Shift Reaction

    Markowitsch, C. & Lehner, M., 2022, (Accepted/In press).

    Research output: Contribution to conference › Presentation › Research › peer-review

  67. Published

    Implementierung standardisierter Vermessungsmethoden für Kolonnenpackungen

    Schlager, M., Haushofer, G., Triebl, A. M., Wolf-Zoellner, V., Lehner, M., Geipel, C. & Sola Cervera, J. L., 2022.

    Research output: Contribution to conference › Presentation › Research

  68. Published

    Modellierung des Absorptionssystems Schwefeldioxid-Meerwasser zur Auslegung von Packungskolonnen

    Schlager, M., Wolf-Zoellner, V. & Lehner, M., 2022.

    Research output: Contribution to conference › Presentation › Research

  69. Published

    The metallurgical requirements to control sulfur in steel with the transformation to climate-neutral steelmaking

    Schenk, J., 2022. 10 p.

    Research output: Contribution to conference › Paper

  70. 2021
  71. Published

    Influence of a Prior Oxidation on the Reduction Behavior of Magnetite Iron Ore Ultra-Fines Using Hydrogen

    Wolfinger, T., Spreitzer, D., Zheng, H. & Schenk, J., 21 Dec 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    In Situ Catalytic Methanation of Real Steelworks Gases

    Wolf-Zöllner, P., Medved, A. R., Lehner, M., Kieberger, N. & Rechberger, K., 3 Dec 2021, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 14.2021, 23, 22 p., 8131.

    Research output: Contribution to journal › Article › Research › peer-review

  73. E-pub ahead of print

    The PIOLab: Building global physical input–output tables in a virtual laboratory

    Wieland, H., Lenzen, M., Geschke, A., Fry, J., Wiedenhofer, D., Eisenmenger, N., Schenk, J. & Giljum, S., 18 Nov 2021, (E-pub ahead of print) In: Journal of industrial ecology.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Weiterentwicklung einer nass-mechanischen Aufbereitungsanlage zur Gewinnung von hochreinen Polyolefinkonzentraten für ein chemisches und mechanisches Recycling

    Schwabl, D., Bauer, M., Köhldorfer, P. & Lehner, M., 12 Nov 2021, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 74.2022, February, p. 64-74 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Evaluation of Dissolution Rate and Behavior of MgO Carriers for Primary and Secondary Metallurgical Slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., Oct 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 5, p. 2939-2950 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Techno-Economic Assessment of Thermally Integrated Co-Electrolysis and Methanation for Industrial Closed Carbon Cycles

    Böhm, H., Lehner, M. & Kienberger, T., 27 Sept 2021, In: Frontiers in sustainability. 2021, 2, 16 p., 726332.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    DIE ROLLE VON WASSERSTOFF FÜR DIE DEKARBONISIERUNG

    Lehner, M. & Obenaus-Emler, R., 16 Sept 2021, In: Österreichische Ingenieur- und Architekten-Zeitschrift : ÖIAZ. 166.2021, September, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. E-pub ahead of print

    Experimental determination of the MnO activity coefficient in high-manganese slags using the chemical equilibrium method

    Cheremisina, E., Gao, X., Ueda, S., Kitamura, S. Y., Yamashina, R. & Schenk, J., 26 Jul 2021, (E-pub ahead of print) In: Metals. 11.2021, 8, 13 p., 1190.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Enrichment of Integrated Steel Plant Process Gases with Implementation of Renewable Energy : Integration of power-to-gas and biomass gasification system in steel production

    Medved, A. R., Lehner, M., Rosenfeld, D., Lindorfer, J. & Rechberger, K., 29 Jun 2021, In: Johnson Matthey Technology Review. 65.2021, 3, p. 453 - 465 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Computer‑Aided Exergy Evaluation of Hydrothermal Liquefaction for Biocrude Production from Nannochloropsis sp.

    Borazjani, Z., Azin, R., Osfouri, S., Lehner, M. & Ellersdorfer, M., 13 Jun 2021, In: BioEnergy research . 2021, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Educational Concept for Citizens' Awareness Towards Technological Advancements for a Sustainable Society - Introducing a Concept for Interactive Societal Learning on Hydrogen and Carbon

    Obenaus-Emler, R., Lehner, M., Murphy, M. & Pacher, C., 9 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 6, p. 314-322 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Effect of Prior Oxidation on the Reduction Behavior of Magnetite-Based Iron Ore During Hydrogen-Induced Fluidized Bed Reduction

    Zheng, H., Spreitzer, D., Wolfinger, T., Schenk, J. & Xu, R., 1 Jun 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52.2021, 4, p. 1955-1971 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. E-pub ahead of print

    Measurements methodologies for basic oxygen furnace cold modeling

    Gonçalves, F., Ribeiro, M. A., Correa, R., Silva, R., Braga, B., Maia, B. T., Tavares, R. P., De Carvalho, D. A. G. & Schenk, J., 4 May 2021, (E-pub ahead of print) In: Journal of Materials Research and Technology. 13.2021, July-August, p. 834-856 23 p.

    Research output: Contribution to journal › Review article › peer-review

  84. E-pub ahead of print

    Review on the Oxidation Behaviors and Kinetics of Magnetite in Particle Scale

    Zheng, H., Schenk, J., Spreitzer, D., Wolfinger, T. & Daghagheleh, O., 3 May 2021, (E-pub ahead of print) In: Steel research international.

    Research output: Contribution to journal › Review article › peer-review

  85. E-pub ahead of print

    Statistical Analysis of the Inclusions in Rare Earth-M (M = Ca and Ti) Treated Steel

    Xie, Y., Song, M., Wang, B., Zhu, H., Xue, Z., Mayerhofer, A., Michelic, S. K., Bernhard, C. & Schenk, J., 29 Apr 2021, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Carbon Capture and Utilization (CCU)

    Lehner, M., 26 Apr 2021

    Research output: Non-textual form › Web publication/site › Research

  87. Published

    Beitrag der Abfallwirtschaft zum Klimaschutz anhand von Forschungsprojekten der Montanuniversität Leoben

    Friedrich, K., Pomberger, R. & Lehner, M., 12 Apr 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    Advancing Plastic Recycling by Wet-Mechanical Processing of Mixed Waste Fractions

    Schwabl, D., Bauer, M. & Lehner, M., 9 Mar 2021, In: Processes : open access journal. 9.2021, 3, 16 p., 493.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Evaluation of dissolution rate and behaviour of MgO carriers for primary and secondary metallurgical slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Rössler, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  90. Published

    Gibbs energy minimization and particle dissolution

    Ogris, D., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  91. Published

    Iron

    Schenk, J., 2021, Kirk‐Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Großbritannien, p. 1-41 41 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  92. Published

    Packungsstrukturen für die Abgasentschwefelung auf Hochseeschiffen

    Schlager, M., Wolf-Zoellner, V. & Lehner, M., 2021.

    Research output: Contribution to conference › Presentation › Research

  93. Published

    Processing and utilization of steelmaking slags in the European Union

    Schenk, J. & Draxler, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  94. Published

    Static dissolution evaluation of dolomite-based materials in EAF-type slag

    Scheiber, S., Cheremisina, E., Rieger, J., Schenk, J., Firsbach, F., Johnson, W., Chopin, T. & Nispel, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  95. Published

    Thermodynamic and kinetic modelling of the dissolution process of lime particles in BOF slags

    Ogris, D. M., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Paper › peer-review

  96. 2020
  97. Published

    Lumped Kinetic Modeling of Polypropylene and Polyethylene Co-Pyrolysis in Tubular Reactors

    Lechleitner, A., Schubert, T., Hofer, W. & Lehner, M., 25 Dec 2020, In: Processes : open access journal. 9.2021, 1, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    K1-MET—A Success Story Since Almost 20 Years

    Rieger, J., Schenk, J., Buergler, T., Kofler, I., Schatzl, M. & Huemer, G., Dec 2020, In: Steel research international. 91.2020, 12, 4 p., 2000233.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Special Issue:K1‐MET – Competence in Advanced Metallurgical and Environmental Process Development

    Schenk, J. (Guest ed.) & Bürgler, T. (Guest ed.), Dec 2020, In: Steel research international.

    Research output: Contribution to journal › Special issue › Research › peer-review

  100. Published

    The potential of insect in waste management-an introduction to possible applications

    Himler, L., Lehner, M., Friedacher, A. & Ertl, C., Nov 2020, Konferenzband zur 15. Recy & DepoTech-Konferenz. Vol. 15. p. 687–694 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Überführung eines nass-mechanischen Aufbereitungsverfahrens für Altkunststoffe in den Pilotmaßstab

    Schwabl, D., Bauer, M., Peyha, M. & Lehner, M., Nov 2020, Recy & DepoTech 2020: Konferenzband zur 15. Recy & DepoTech-Konferenz. Leoben, Vol. 15. p. 129 - 134 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Dual Pressure Level Methanation of Co‐SOEC Syngas

    Krammer, A., Medved, A. R., Peham, M., Wolf-Zöllner, P., Salbrechter, K. & Lehner, M., 24 Oct 2020, In: Energy Technology. 2020, 12 p., 2000746 .

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Dual fluidized bed based technologies for carbon dioxide reduction — example hot metal production

    Müller, S., Theiss, L., Fleiß, B., Hammerschmid, M., Fuchs, J., Penthor, S., Rosenfeld, D., Lehner, M. & Hofbauer, H., 3 Oct 2020, In: Biomass conversion and biorefinery.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    A study on the stability fields of arc plasma in the hpsr process

    Zarl, M. A., Farkas, M. A. & Schenk, J., Oct 2020, In: Metals. 10.2020, 10, p. 1-22 22 p., 1394.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Fluidization behavior and reducibility of iron ore fines during hydrogen-induced fluidized bed reduction

    Spreitzer, D. & Schenk, J., Oct 2020, In: Particuology. 52, p. 36-46 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    From henry bessemer’s invention to comprehensive converter process optimization

    Bazhin, V. Y., Schenk, J., Konovalov, G. V. & Kosovtseva, T. R., Oct 2020, In: Cvetnye metally. 2020, 10, p. 88-95 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Einfluss von Salinität und Alkalinität auf die Absorption von Schwefeldioxid in Elektrolytlösungen und Meerwasser

    Schlager, M., Wolf-Zoellner, V. & Lehner, M., 21 Sept 2020.

    Research output: Contribution to conference › Poster › Research

  108. Published

    METHOD OF RECYCLING OIL-OILY-CONTAMINATED WASTES, OILY SCALE, COKE-CHEMICAL WASTES

    Хуснутдинов, И. Ш., Хуснутдинов, С. И., Алексеева, А. А., Бажин, В. Ю., Дубовиков, О. А. & Иоганн, Л. Ш., 21 Aug 2020, IPC No. F23G 5/ 027 A I, Patent No. RU2730304, Priority date 19 Mar 2019, Priority No. RU20190107878

    Research output: Patent

  109. Published

    Microstructural evolution of metallurgical coke: Evidence from Raman spectroscopy

    Rantitsch, G., Bhattacharyya, A., Günbati, A., Schulten, M-A., Schenk, J., Letofsky-Papst, I. & Albering, J., 1 Jul 2020, In: International journal of coal geology. 227.2020, 1 July, 12 p., 103546.

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Structural Features and Combustion Behaviour of Waste Bamboo Chopstick Chars Pyrolysed at Different Temperatures

    Xu, R., Deng, S., Wang, W., Schenk, J. & Wang, F., 1 Jun 2020, In: BioEnergy research . 13.2020, 2, p. 439-451 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Tailoring the FeO/SiO2 Ratio in Electric Arc Furnace Slags to Minimize the Leaching of Vanadium and Chromium

    Neuhold, S. F., Algermissen, D., Drissen, P., Adamczyk, B., Presoly, P., Sedlazeck, K. P., Schenk, J., Raith, J., Pomberger, R. & Vollprecht, D., 1 Apr 2020, In: Applied Sciences : open access journal. 10, 7, p. 5249 17 p., 2549.

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Modellierung einer industriellen Kunststoff Co-Pyrolyse

    Lechleitner, A., Schubert, T., Lehner, M. & Hofer, W., 12 Mar 2020, p. 20.

    Research output: Contribution to conference › Abstract

  113. E-pub ahead of print

    The effect of alkali on the reaction kinetics and strength of blast furnace coke

    Dastidar, M. G., Bhattacharyya, A., Sarkar, B. K., Dey, R., Mitra, M. K. & Schenk, J., 21 Feb 2020, (E-pub ahead of print) In: Fuel. 268.2020, May, 10 p., 117388.

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction

    Naseri Seftejani, M., Schenk, J., Spreitzer, D. & Zarl, M. A., 20 Feb 2020, In: Materials. 13.2020, 4, 24 p., 935.

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    Novel sintering indexes to evaluate and correlate the crystal characteristics and compressive strength in magnetite pellets

    Wang, Y., Schenk, J., Zhang, J., Liu, Z., Wang, J., Niu, L. & Cheng, Q., 15 Feb 2020, In: Powder Technology. 362.2020, 15 February, p. 517-526 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Effect of CO2 and O2 Mixed Injection on the Decarburization and Manganese Retention in High-Mn Twinning-Induced Plasticity Steels

    Liu, H., Liu, J., Schenk, J., Penz, F. M., Sun, L., Zhang, R. & An, Z., 3 Feb 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 2, p. 756-762 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    Rückgewinnung von CO2 aus Abgasen und Herstellung von Methanol unter Berücksichtigung der Prozessbilanzierung

    Lehner, M. & Schubert, T., 3 Feb 2020, Energie aus Abfall. Thiel, S., Thomé-Kozmiensky, E., Quicker, P. & Gosten, A. (eds.). Neuruppin, Vol. 17. p. 421-438

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  118. Published

    Aktueller Stand und Perspektiven für eine CO2-freie Stahlerzeugung

    Sormann, A. & Schenk, J., Feb 2020, In: Stahl + Technik. 02, 2020, p. 32-35 4 p.

    Research output: Contribution to journal › Article › Transfer

  119. Published

    Utilization of metallurgical slag with presence of novel CaO-MgO-SiO2-Al2O3 as a composite sorbent for wastewater treatment contaminated by cerium

    Morozova, A. G., Lonzinger, T. M., Skotnikov, V. A., Sahu, J. N., Mikhailov, G. G., Schenk, J., Bhattacharyya, A. & Kapelyushin, Y., 28 Jan 2020, In: Journal of Cleaner Production. 255.2020, 9 p., 120286.

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Einbindung erneuerbarer Energie in ein integriertes Stahlwerk

    Medved, A. R. & Lehner, M., 2020, 16. Symposium Energieinnovation 2020: Kurzfassungsband. p. 77 78 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. Published

    Improvement of laboratory reduction tests to reproduce the industrial reduction behavior of iron ore pellets under MIDREX conditions

    Daghagheleh, O., 2020

    Research output: Thesis › Master's Thesis

  122. Published

    Kinetische Modellierung einer Kunststoff Pyrolyse

    Lechleitner, A., Lehner, M., Schubert, T. & Hofer, W., 2020, Recy & DepoTech 2020: Konferenzband zur 15. Recy & DepoTech-Konferenz. 200 ed. Leoben, Vol. 15.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    Methods and technologies for the processing of water-hydrocarbon emulsions and technogenic raw materials of metallurgical and petrochemical enterprises: A review

    Khusnutdinov, S. I., Schenk, J., Khusnutdinov, I. S., Safiulina, A. F., Bazhin, V. Y. & Dubovikov, O. A., 2020, Topical Issues of Rational Use of Natural Resources 2019. Litvinenko, V. (ed.). p. 525-532 8 p. (Topical Issues of Rational Use of Natural Resources 2019; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Sustainable steelmaking - A strategic evaluation of the future potential of hydrogen in the steel industry

    Skorianz, M., Engel, E. & Schenk, J., 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. Association for Iron and Steel Technology, AISTECH, p. 372-381 10 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. 2019
  126. Published

    Dynamic Methanation of By-product Gases from Integrated Steelworks

    Wolf-Zöllner, P., Krammer, A., Medved, A. R., Salbrechter, K. & Lehner, M., 18 Nov 2019.

    Research output: Contribution to conference › Abstract

  127. E-pub ahead of print

    4-Lump kinetic model of the co-pyrolysis of LDPE and a heavy petroleum fraction

    Schubert, T., Lechleitner, A., Lehner, M. & Hofer, W., 13 Nov 2019, (E-pub ahead of print) In: Fuel. 262.2020, February, 8 p., 116597.

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    Gasification Characteristics and Kinetics of Unburned Pulverized Coal in Blast Furnaces

    Zan, R., Wang, W., Xu, R., Schenk, J., Zheng, H. & Wang, H., 13 Nov 2019, In: Energies. 12.2019, 22, 14 p., 4324.

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Chemisches Recycling von gemischten Kunststoffabfällen als ergänzender Recyclingpfad zur Erhöhung der Recyclingquote

    Schwabl, D., Schubert, T., Lechleitner, A., Bauer, M. & Lehner, M., 6 Nov 2019, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 72.2020, February, p. 47–60 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    Kinetic Modeling of Industrial Plastic Pyrolysis

    Lechleitner, A., Schubert, T., Lehner, M. & Hofer, W., Nov 2019, International Conference on Polygeneration Strategies 19: Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  131. Published

    Result reliability in comparative solid waste processing experiments

    Khodier, K., Sarc, R. & Lehner, M., 9 Oct 2019.

    Research output: Contribution to conference › Poster › Transfer

  132. Published

    Smart solid waste processing plant: vision and pathway

    Khodier, K., Curtis, A., Sarc, R., Lehner, M., O'Leary, P. & Pomberger, R., 8 Oct 2019.

    Research output: Contribution to conference › Presentation › Research

  133. Published

    método e disposição para a produção de ferro gusa líquido ou produtos precursores de aço líquido

    Georg, A., Hado, H., Johann, W., Johannes, L. S., Kurt, W., Martin, S., Robert, M. & Thomas, E., 24 Sept 2019, IPC No. F27D 17/ 00 A I, Patent No. BRPI0908724, Priority date 30 Jan 2009, Priority No. WO2009EP51058

    Research output: Patent

  134. E-pub ahead of print

    Scenario analysis of implementing a power-to-gas and biomass gasification system in an integrated steel plant: A techno-economic and environmental study

    Rosenfeld, D., Böhm, H., Lindorfer, J. & Lehner, M., 15 Sept 2019, (E-pub ahead of print) In: Renewable energy . 147.2020, Part 1, March, p. 1511-1524 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    Sampling and analysis of coarsely shredded mixed commercial waste. Part I: procedure, particle size and sorting analysis

    Khodier, K., Viczek, S. A., Curtis, A., Aldrian, A., O'Leary, P., Lehner, M. & Sarc, R., 7 Sept 2019, In: International journal of environmental science and technology. 2019, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Reduction of Iron Oxides with Hydrogen–A Review

    Spreitzer, D. & Schenk, J., 18 Aug 2019, In: Steel research international. 90.2019, 10, 17 p., 1900108.

    Research output: Contribution to journal › Article › Transfer › peer-review

  137. E-pub ahead of print

    Iron Ore Reduction by Hydrogen Using a Laboratory Scale Fluidized Bed Reactor: Kinetic Investigation—Experimental Setup and Method for Determination

    Spreitzer, D. & Schenk, J., 24 Jul 2019, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 5, p. 2471-2484 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Co-utilization of converter sludge-containing dedust wastewater in iron ore sintering to save fresh water, enhance quality and reduce pollution

    Wang, Y., Zhang, J., Liu, Z., Du, C., Schenk, J., Shao, J. & Zhang, Y., 21 Jun 2019, In: Journal of Cleaner Production. 234.2019, 10 October, p. 157-170 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Multilinear modelling of particle size distributions

    Khodier, K., Lehner, M. & Sarc, R., 6 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  140. Published

    Characterization of coke surface using topographic and specific surface area measurement techniques

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Guenbati, A., Janhsen, U. & Schulten, M., Jun 2019, METEC-ESTAD 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. Published

    Extended performance comparison of different pressure drop, hold-up and flooding point correlations for packed columns

    Wolf-Zöllner, V., Seibert, F. & Lehner, M., 20 May 2019, In: Chemical Engineering Research and Design. 147.2019, July, p. 699-708 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Reduction of Haematite Using Hydrogen Thermal Plasma

    Naseri Seftejani, M., Schenk, J. & Zarl, M. A., 16 May 2019, In: Materials. 12.2019, 10, 22 p., 1608.

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    Rohstoffliches Recycling - Welche Möglichkeiten und Chancen gibt es?

    Pomberger, R. & Lehner, M., 15 May 2019, Österreichische Abfallwirtschaftstagung 2019: Vom Wert- zum Werkstoff.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  144. Published

    Standardisierte Aufbereitung CH4-basierter Gase: Projekt „Greening the Gas”, Task 3.2

    Ellersdorfer, M. & Lehner, M., 15 May 2019.

    Research output: Contribution to conference › Poster › Research

  145. Published

    Structural Change of Coke During the Burden Descent in an Experimental Blast Furnace

    Bhattacharyya, A., Rantitsch, G., Wiener, J., Schenk, J., Pethke, J. & Fredriksson, U., May 2019, AISTECH 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  146. Published

    Dynamic Operation of a Power-to-Gas System for Integrated Steelworks

    Wolf-Zöllner, P., Krammer, A., Medved, A. R. & Lehner, M., 29 Apr 2019.

    Research output: Contribution to conference › Poster › Research

  147. Published

    Dynamic Operation of a Power-to-Gas System for Integrated Steelworks

    Wolf-Zöllner, P., Krammer, A., Medved, A. R. & Lehner, M., 29 Apr 2019, 15th Minisymposium Verfahrenstechnik and 6th Partikelforum Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Evaluating Particle Size Distributions of Solid Waste - what is "good"?

    Khodier, K., Sarc, R., Lehner, M. & O'Leary, P., 29 Apr 2019.

    Research output: Contribution to conference › Poster › Research

  149. Published

    Further development of an alternative organic protein concept - Project REsect

    Himler, L., Lehner, M., Friedacher, A. & Ertl, C., 29 Apr 2019, p. 119. 1 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  150. Published

    Installation and hydraulic measurement of ceramic structured packings

    Capo Tous, F., Wolf-Zöllner, V. M. & Lehner, M., 29 Apr 2019, 15th Minisymposium Verfahrenstechnik & 6th Partikelforum: Conference Proceedings. Leoben

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  151. Published

    Analytical and numerical determination of the heat transfer coefficient between scrap and hot metal based on small-scale experiments

    Penz, F. M., Tavares, R. P., Weiss, C., Schenk, J., Ammer, R., Pastucha, K. & Klösch, G., 24 Apr 2019, In: International journal of heat and mass transfer. 138.2019, August, p. 640-646 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  152. Published

    Das Potenzial der Nassaufbereitung von Kunststoffabfällen

    Schwabl, D., Lehner, M. & Bauer, M., 9 Apr 2019.

    Research output: Contribution to conference › Presentation › Research

  153. E-pub ahead of print

    Residual Processing in the European Steel Industry: A Technological Overview

    Rieger, J. & Schenk, J., 3 Apr 2019, (E-pub ahead of print) In: Journal of Sustainable Metallurgy. 5.2019, 3, p. 295-309 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Evaluation of the Influences of Scrap Melting and Dissolution during Dynamic Linz–Donawitz (LD) Converter Modelling

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., Apr 2019, In: Processes : open access journal. 7.2019, 4

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    A Review of Steel Scrap Melting in Molten Iron-Carbon Melts

    Penz, F. M. & Schenk, J., 1 Jan 2019, In: Steel research international. 2019, 20 p., 1900124.

    Research output: Contribution to journal › Review article › peer-review

  156. Published

    Diffusive steel scrap melting in carbon-saturated hot metal-Phenomenological investigation at the solid-liquid interface

    Penz, F. M., Schenk, J., Ammer, R., Klösch, G., Pastucha, K. & Reischl, M., 1 Jan 2019, In: Materials. 12.2019, 8, 1358.

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    Evaluation of mixing and mass transfer at ternium Brazil's BOF through cold model experiments

    Silveira, D. C. O., Ribeiro, M. A., Salgado, R. S., Tavares, R. P., Maia, B. T., De Carvalho, D. A. G. & Schenk, J., 1 Jan 2019, Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 979-986 8 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. Published

    Kinetics and Mechanisms of Dolime Dissolution in Steelmaking Slag

    Cheremisina, E., Schenk, J., Nocke, L., Paul, A. & Wimmer, G., 1 Jan 2019, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1269 - 1276 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  159. Published

    Structural change of coke structure during the burden descend in an experimental blast furnace

    Bhattacharyya, A., Rantitsch, G., Wiener, J., Schenk, J., Pethke, J. & Fredriksson, U., 1 Jan 2019, Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 263-268 6 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  160. Published

    Thermodynamic Model of Ion-Exchange Process as Exemplified by Cerium Sorption from Multisalt Solutions

    Cheremisina, O. V., Schenk, J., Cheremisina, E. A. & Ponomareva, M. A., 1 Jan 2019, In: Journal of Mining Institute. 237.2019, p. 307-316 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  161. Published

    Evaluating Particle Size Distributions of Solid Waste - what is "good"?

    Khodier, K., Sarc, R., Lehner, M. & O'Leary, P., 2019, Conference Proceedings of 15th Minisymposium Verfahrenstechnik and 6th Partikelforum, Montanuniversitaet Leoben, Austria, 29th-30th April 2019. p. 85

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    INFLUENCE OF TEMPERATURE, PRESSURE AND RESIDENCE TIME ON THE CONTINUOUS LDPE CO PYROLYSIS

    Schubert, T., Lehner, M., Hofer, W. & Lechleitner, A., 2019, ISFR 2019 Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    INFLUENCE OF TEMPERATURE, PRESSURE AND RESIDENCE TIME ON THE CONTINUOUS LDPE CO PYROLYSIS

    Schubert, T., Lehner, M., Hofer, W. & Lechleitner, A., 2019.

    Research output: Contribution to conference › Poster › Research

  164. Published

    Influence of reaction pressure on co-pyrolysis of LDPE and a heavy petroleum fraction

    Schubert, T., Lehner, M., Karner, T., Hofer, W. & Lechleitner, A., 2019, In: Fuel Processing Technology. 193.2019, October, p. 204-211 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  165. Published

    KIC RawMaterials: Iron Balance—Austria

    Wolfinger, T., Spreitzer, D., Zarl, M., Pichler, A. & Schenk, J., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 183 - 187 5 p.

    Research output: Contribution to journal › Article › Research

  166. Published

    KINETIC MODELING OF PYROLYSIS WITHIN THE SCOPE OF INDUSTRIAL PLASTIC FEEDSTOCK RECYCLING

    Lechleitner, A., Schubert, T., Lehner, M. & Hofer, W., 2019.

    Research output: Contribution to conference › Abstract › peer-review

  167. Published

    KINETIC MODELING OF PYROLYSIS WITHIN THE SCOPE OF INDUSTRIAL PLASTIC FEEDSTOCK RECYCLING

    Lechleitner, A., Schubert, T., Lehner, M. & Hofer, W., 2019, ISFR 2019 Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  168. Published

    Microstructural Evolution of Blast Furnace Coke During Experimental Heating —The IFORS Approach

    Rantitsch, G., Bhattacharyya, A. & Schenk, J., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 2019, 130, p. 1 - 4 4 p.

    Research output: Contribution to journal › Article › Research

  169. Published

    Multilinear modelling of particle size distributions

    Khodier, K., Lehner, M. & Sarc, R., 2019, Proceedings of the 8th International Workshop on Compositional Data Analysis (CoDaWork2019). Egozcue, J. J., Graffelman, J. & Ortego, M. I. (eds.). p. 82-85

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    Reactor modeling to determine Arrhenius constants of plastic pyrolysis

    Lechleitner, A., Schubert, T., Lehner, M. & Hofer, W., 2019, 15th Minisymposium Verfahrenstechnik und 6th Partikelforum.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    Reactor modeling to determine Arrhenius constants of plastic pyrolysis

    Lechleitner, A., Schubert, T., Lehner, M. & Hofer, W., 2019.

    Research output: Contribution to conference › Poster › Research

  172. 2018
  173. Published

    Dissolution of Scrap in Hot Metal under Linz-Donawitz (LD) Steelmaking Conditions

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., 18 Dec 2018, In: Metals : open access journal . 8.2018, 1078, 9 p., 1078.

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Thermodynamic of Liquid Iron Ore Reduction by Hydrogen Thermal Plasma

    Naseri Seftejani, M. & Schenk, J., 11 Dec 2018, In: Metals : open access journal . 8, 12, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Abrasiveness of mining slurries: influence of the morphology, concentration of slurries, mean grain size and nature of the abrasive particles

    Moreira, V. E. S., Silva, F. C., Quintao, V. M., Siqueira, F., Kaelber, F., Meinhold, S., Schenk, J. & Rodrigues da Costa, A., 3 Dec 2018.

    Research output: Contribution to conference › Paper › peer-review

  176. Published

    Dissolution behaviour of ULC steel in carbon saturated hot metal

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., Dec 2018, In: Metallurgia Italiana. 110.2018, 11-12, p. 36-45 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  177. Published

    Influence of Iron Minerals on the Volume, Strength, and CO2 Gasification of Ferro-coke

    Xu, R., Zheng, H., Wang, W., Schenk, J. & Xue, Z., Dec 2018, In: Energy and Fuels. 32, 12, p. 12118-12127

    Research output: Contribution to journal › Article › Research › peer-review

  178. Published

    Experimental determination of the strength and reactivity of lumpy and briquetted chars from non-coking coals under melter-gasifier conditions

    Bhattacharyya, A., Schenk, J. & Heckmann, H., 26 Nov 2018, In: Ironmaking and steelmaking. 45, 10, p. 907-912

    Research output: Contribution to journal › Article › Research › peer-review

  179. Published

    Performance comparison of different pressure drop, hold-up and flooding point correlations for packed columns

    Wolf-Zöllner, V., Seibert, F. & Lehner, M., 16 Nov 2018, In: Chemical Engineering Research and Design. 141.2019, January, p. 388-401 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  180. Published

    Freisetzungsbestimmende Mechanismen von Schwermetallen in Stahlwerksschlacken - Analyse, Modellierung, Synthesen

    Neuhold, S. F., Vollprecht, D., Presoly, P., Schenk, J. & Adamczyk, B., 7 Nov 2018, Recy & DepoTech 2018: Vorträge-Konferenzband. Leoben, p. 135-140 122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  181. Published

    Transport Properties of HPSR Gases

    Naseri Seftejani, M. & Schenk, J., 24 Oct 2018, The Chinese Society for Metals.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  182. Published

    Guest Editorial - EUROMAT 2017 Symposia on Processing

    Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., Oct 2018, In: Journal of Materials Engineering and Performance. 27.2018, 10, p. 4981-4982

    Research output: Contribution to journal › Editorial › peer-review

  183. Published

    Effect of the Particle Size of Iron Ore on the Pyrolysis Kinetic Behaviour of Coal-Iron Ore Briquettes

    Zheng, H., Wang, W., Xu, R., Zan, R., Schenk, J. & Xue, Z., 29 Sept 2018, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 11, 10, 16 p., 2595.

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    THERMODYNAMIC ASPECTS OF HYDROGEN PLASMA SMELTING REDUCTION OF IRON OXIDES

    Naseri Seftejani, M. & Schenk, J., 20 Sept 2018, Austrian Society for Metallurgy and Materials: ASMET. ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    Extended performance comparison of different pressure drop, hold-up and flooding point correlations for packed columns

    Wolf-Zöllner, V. M., Seibert, F. & Lehner, M., 17 Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  186. Published

    MICROSTRUCTURAL EVOLUTION OF BLAST FURNACE COKE DURING EXPERIMENTAL HEATING – THE IFORS APPROACH

    Rantitsch, G., Bhattacharyya, A. & Schenk, J., Sept 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  187. Published

    STRUCTURAL CHARACTERIZATION OF COKE FROM THE TUYERE REGION OF THE BLAST FURNACE

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Janhsen, U. & Guenbati, A., Sept 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  188. Published

    Kinetics of molten iron oxides reduction using hydrogen

    Naseri Seftejani, M. & Schenk, J., Jul 2018, In: Metallurgia Italiana. n. 7/8 2018, 0026-0843, p. 5-14 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  189. Published

    Development of Honeycomb Methanation Catalyst and Its Application in Power to Gas Systems

    Biegger, P., Kirchbacher, F., Medved, A. R., Miltner, M., Lehner, M. & Harasek, M., 27 Jun 2018, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 11.2018, 7, 17 p., 1679.

    Research output: Contribution to journal › Article › Research › peer-review

  190. Published

    DISSOLUTION BEHAVIOUR OF ULC STEEL IN CARBON SATURATED HOT METAL

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., 13 Jun 2018, p. ICS070. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  191. Published

    The way to a carbon free steelmaking

    Sormann, A., Schenk, J., Naseri Seftejani, M., Zarl, M. A. & Spreitzer, D., 10 Jun 2018.

    Research output: Contribution to conference › Paper › peer-review

  192. Published

    Modelling the dependence of sinter bed permeability on sinter porosity and structure

    Höftberger, A., Bhattacharyya, A., Schenk, J., Weiß, C., Schaffer, C. & Schuster, E., Jun 2018, Proceedings of ADMET 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    Sink–float density separation of post-consumer plastics for feedstock recycling

    Bauer, M., Lehner, M., Schwabl, D., Flachberger, H., Kranzinger, L., Pomberger, R. & Hofer, W., 24 May 2018, In: Journal of Material Cycles and Waste Management. 20.2018, July, p. 1781–1791 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  194. Published

    Characterization of Ironmaking Raw Materials Using Computed Tomography

    Bhattacharyya, A., Schenk, J., Habe, D. & Oberdorfer, B., May 2018, AISTECH 2018 Proceedings. p. 211 216 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. Published

    Output-oriented analysis of the wet mechanical processing of polyolefin-rich waste for feedstock recycling

    Kranzinger, L. J., Pomberger, R., Schwabl, D., Flachberger, H., Bauer, M., Lehner, M. & Hofer, W., May 2018, In: Waste management & research. p. 445 - 453

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Evolution of Metallurgical Properties and Microstructures of Lump Coal During the Descending Process in COREX Gasifier

    Xu, R., Zheng, H., Wang, W., Schenk, J., Bhattacharyya, A., Xue, Z. & Song, M., 18 Apr 2018, In: International journal of coal preparation and utilization. p. 1-17 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    Kinetic modeling of pyrolysis wihtin the scope of plastic feedstoock recycling

    Lechleitner, A., Schubert, T., Lehner, M. & Hofer, W., 5 Apr 2018.

    Research output: Contribution to conference › Poster › Research

  198. Published

    Comparison of wet-mechanic density separators for post-consumer plastics

    Schwabl, D., Bauer, M., Flachberger, H., Pomberger, R., Lehner, M., Kranzinger, L. J. & Hofer, W., 4 Apr 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  199. Published

    Process Equipment for the Implementation of Industry 4.0-Approaches on Mechanical Treatment of Municipal Solid Waste

    Khodier, K., Sarc, R., Lehner, M., Pomberger, R. & O'Leary, P., 4 Apr 2018.

    Research output: Contribution to conference › Poster › Research

  200. Published

    Underground Sun Conversion

    Biegger, P., Kittinger, F. & Lehner, M., 4 Apr 2018, Book of Abstracts. Samhaber, W., Schneiderbauer, S. & Rezaei, M. (eds.). 1 ed. Linz, p. 4-9 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  201. Published

    Underground Sun Conversion

    Biegger, P., Kittinger, F. & Lehner, M., 4 Apr 2018.

    Research output: Contribution to conference › Poster › Research

  202. Published

    Investigation of the content hexavalent chromium occurred in slags during steel making process

    Cheremisina, E. & Schenk, J., 1 Apr 2018, In: Ćernye metally : dvuchnedel'nyj proizvodstvenno-techničeskij žurnal po problemam černoj metallurgii . 4, p. 11-12 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    Process Equipment for the Implementation of Industry 4.0-Approaches on Mechanical Treatment of Municipal Solid Waste

    Khodier, K., Sarc, R., Lehner, M., Pomberger, R. & O'Leary, P., Apr 2018, 14th Minisymposium chemical & process engineering and 5th particle forum: Book of Abstracts. Samhaber, W. M., Schneiderbauer, S. & Rezaei, M. (eds.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  204. Published

    Gasification Reactivity and Structure Evolution of Metallurgical Coke under H2O/CO2 Atmosphere

    Xu, R., Dai, B., Wang, W., Schenk, J., Bhattacharyya, A. & Xue, Z., 15 Feb 2018, In: Energy and Fuels. 32, 2, p. 1188-1195 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  205. Published

    Fundamentals of hydrogen plasma smelting reduction (HPSR) of iron oxides, a new generation of steelmaking processes

    Naseri Seftejani, M. & Schenk, J., 6 Feb 2018.

    Research output: Contribution to conference › Paper › peer-review

  206. Published

    Analysis of the Alkali Flow in Ironmaking Reactors by a Thermochemical Approach: Blast Furnace

    Pichler, A., Hauzenberger, F., Schenk, J., Stocker, H. & Thaler, C., 1 Feb 2018, In: Steel research international. 89, 2, 1700303.

    Research output: Contribution to journal › Article › Research › peer-review

  207. Published

    Effect of iron ore type on the thermal behaviour and kinetics of coal-iron ore briquettes during coking

    Xu, R., Dai, B., Wang, W., Schenk, J. & Xue, Z., 12 Jan 2018, In: Fuel Processing Technology. 173.2018, May, p. 11-20 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  208. Published

    Hydrogen in natural gas pipelines and related equipment

    Biegger, P., Lehner, M. & Medved, A. R., 10 Jan 2018, Leoben. 74 p.

    Research output: Book/Report › Commissioned report › Transfer

  209. Published

    Dissolution rate of various MgO materials in steel and secondary metallurgy slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., 1 Jan 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Association for Iron and Steel Technology, AISTECH, Vol. 2018-May. p. 1103-1115 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  210. Published

    Kinetics of hydrogen plasma smelting reduction of iron oxides

    Seftejani, M. N. & Schenk, J., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  211. Published

    Experimental and modeling approach of LDPE thermal cracking for feedstock recycling

    Schubert, T., Lehner, M. & Hofer, W., 2018, 14th MINISYMPOSIUM CHEMICAL & PROCESS ENGINEERING and 5th PARTICLE FORUM Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Extended performance comparison of different pressure drop, hold-up and flooding point correlations for packed columns

    Wolf-Zöllner, V. M., Seibert, F. & Lehner, M., 2018, Papers of the 11th International Conference on Distillation and Absorption: DA2018, 16-19 September, 2018, Florence, Italy. p. 43 48 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  213. Published

    Performanzvergleich verschiedener Modelle zur Berechnung des Druckverlustes und des Flutpunktes in Packungskolonnen

    Wolf-Zöllner, V. M., Seibert, F. & Lehner, M., 2018.

    Research output: Contribution to conference › Abstract › peer-review

  214. Published

    Performanzvergleich verschiedener Modelle zur Berechnung des Druckverlustes und des Flutpunktes in Packungskolonnen

    Wolf-Zöllner, V. M., Seibert, F. & Lehner, M., 2018.

    Research output: Contribution to conference › Presentation › Research › peer-review

  215. Published

    Stepwise treatment of ashes and slags by dissolution, precipitation of iron phases and carbonate precipitation for production of raw materials for industrial applications

    Höllen, D., Berneder, I., Capo Tous, F., Stöllner, M., Sedlazeck, K. P., Schwarz, T., Aldrian, A. & Lehner, M., 2018, In: Waste management. 78, p. 750 - 762

    Research output: Contribution to journal › Article › Research › peer-review

  216. 2017
  217. Published

    TOWARDS CO2 LEAN IRONMAKING – A REASONABLE WAY FOR INDIA´S STEEL INDUSTRY

    Schenk, J., 11 Dec 2017, 3rd nternational Conference on Science and Technology of Ironmaking & Steelmaking. Kanpur, India

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  218. Published

    Calculation Model to Quantify the Amount of Carry-Over Slag From Primary Metallurgical Plants

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., Dec 2017, In: Bulletin. The Journal of Refractory Innovations. 1, Autumn, p. 76 - 81 6 p.

    Research output: Contribution to journal › Article › Research

  219. Published

    Chromium Stability in Steel Slags

    Cheremisina, E. & Schenk, J., Nov 2017, In: Steel research international. 88.2017, 11, 7 p., 1700206.

    Research output: Contribution to journal › Article › Research › peer-review

  220. Published

    Performance comparison of different pressure drop, hold-up and flooding point correlations for packed columns

    Wolf-Zöllner, V. M., Seibert, F. & Lehner, M., 3 Oct 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  221. Published

    Performance comparison of different pressure drop, hold-up and flooding point correlations for packed columns

    Wolf-Zöllner, V. M., Seibert, F. & Lehner, M., 3 Oct 2017.

    Research output: Contribution to conference › Abstract › peer-review

  222. Published

    Bestandsaufnahme und mögliche Perspektiven der nassmechanischen Aufbereitung von Altkunststoffen für das rohstoffliche Recycling

    Bauer, M., Lehner, M., Schwabl, D., Flachberger, H., Kranzinger, L. J., Pomberger, R. & Hofer, W., 6 Sept 2017, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 69.2017, 11-12, p. 446-459 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  223. Published

    Kein sechswertiges Chrom in Stahlwerksschlacken

    Cheremisina, E. & Schenk, J., Aug 2017, In: Stahl und Eisen. 137, 8, p. 33-34 2 p.

    Research output: Contribution to journal › Letter

  224. Published

    BOCAL PARA A INJEÇÃO DE GÁS CONTENDO OXIGÊNIO EM UM DISPOSITIVO DE FERRO GUSA DOTADO DE UM TUBO DE INSERÇÃO INJETOR

    Stefan, L., Marinko, L-N., Georg, A., Franz, B., Johannes, L. S., Martin, S., Thomas, S., Bogdan, V., Wieder, K. & Wurm, J., 11 Jul 2017, IPC No. F27D 3/ 16 A I, Patent No. BRPI0922727, Priority date 5 Nov 2009, Priority No. WO2009EP64685

    Research output: Patent

  225. Published

    Mechanical Processing of Post-Consumer Plastics for Feedstock Recycling

    Schwabl, D., Flachberger, H., Bauer, M., Lehner, M., Kranzinger, L. J., Pomberger, R. & Hofer, W., 23 Jun 2017.

    Research output: Contribution to conference › Paper

  226. Published

    Mechanical Processing of Post-Consumer Plastics for Feedstock Recycling

    Schwabl, D., Flachberger, H., Kranzinger, L. J., Pomberger, R., Bauer, M., Lehner, M. & Hofer, W., 23 Jun 2017.

    Research output: Contribution to conference › Presentation › Research

  227. Published

    Effect of Scrap Composition on the Thermodynamics and Kinetic Modelling of BOF Converter

    Penz, F. M., Bundschuh, P., Schenk, J., Pastucha, K., Panhofer, H. & Paul, A., 11 Jun 2017, p. 1-10. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  228. Published

    INVESTIGATION OF THE SPECIFIC SURFACE AREA AND PORE STRUCTURE OF BLAST FURNACE SINTERS

    Bhattacharyya, A., Schenk, J., Schaffer, C., Schadler, S. & Schuster, E., Jun 2017, European Steel Technology and Application Days ESTAD 2017: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. Published

    The Effect of H2O on the Reactivity and Microstructure of Metallurgical Coke

    Wang, W., Bowen, D., Xu, R., Schenk, J., Wang, J. & Xu, Z., 24 May 2017, In: Steel research international. 88.2017, 8, p. 1-9 9 p., 1700063.

    Research output: Contribution to journal › Article › Research › peer-review

  230. Published

    Calculation model to quantify the amount of carry-over slag from primary metallurgical aggregates

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., 11 May 2017, Proceedings of ISDM Conference 2017. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  231. Published

    A new methanation and membrane based power-to-gas process for the direct integration of raw biogas - Feasability and Comparison

    Kirchbacher, F., Biegger, P., Miltner, M., Lehner, M. & Harasek, M., 9 May 2017, In: Energy. 146.2018, 1 March, p. 34-46 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  232. Published

    Power-to-Gas: Die Rolle der chemischen Speicherung in einem Energiesystem mit hohen Anteilen an erneuerbarer Energie

    Lehner, M., Biegger, P. & Medved, A. R., 8 May 2017, In: Elektrotechnik und Informationstechnik : e & i. 134.2017, 134, p. 246-251 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  233. Published

    Characterization and Utilization of Natural Zeolites in Technical Applications

    Stocker, K., Ellersdorfer, M., Lehner, M. & Raith, J., Apr 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 4, p. 142-147

    Research output: Contribution to journal › Article › Research

  234. Published

    Performance comparison of different pressure drop correlations for packed columns

    Wolf-Zöllner, V. M., Seibert, F. & Lehner, M., 30 Mar 2017.

    Research output: Contribution to conference › Paper › peer-review

  235. Published

    Vergleichende Betrachtung der Trennstufen eines Aufbereitungsprozesses für polyolefinreiche Altkunststofffraktionen

    Schwabl, D., Flachberger, H., Bauer, M., Lehner, M., Kranzinger, L. J., Pomberger, R. & Hofer, W., 30 Mar 2017.

    Research output: Contribution to conference › Presentation › Research

  236. Published

    Vergleichende Betrachtung der Trennstufen eines Aufbereitungsprozesses für polyolefinreiche Altkunststofffraktionen

    Schwabl, D., Flachberger, H., Bauer, M., Lehner, M., Kranzinger, L. J., Pomberger, R. & Hofer, W., 30 Mar 2017, 13th Minisympsium Verfahrenstechnik: Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  237. Published

    Combination of CO2-methanation and membrane gas treatment in an innovative Power to Gas concept

    Biegger, P., Kirchbacher, F., Medved, A. R., Miltner, M., Lehner, M. & Harasek, M., 29 Mar 2017, Book of Abstracts. 4 p. 1.3.3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  238. Published

    Kombination von CO2-Methanisierung mittels Wabenkatalysator und Membran-Gasaufbereitung in einem innovativen PtG-Konzept

    Biegger, P., Kirchbacher, F., Miltner, M., Medved, A. R., Lehner, M. & Harasek, M., 15 Mar 2017, Kurzfassungen. p. 34 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  239. Published

    Influence of Magnesium Oxide content on kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Ludwig, N., Paul, A. & Wimmer, G., 17 Jan 2017, In: ISIJ international. 57.2017, 2, p. 304-313 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  240. Published

    Technische Dokumentation und Beurteilung der Vorreinigungsanlage für Brauereiabwässer (UASB-Anlage) der Brauerei Göss

    Ellersdorfer, M. & Lehner, M., 17 Jan 2017, 17 p.

    Research output: Book/Report › Commissioned report › Transfer

  241. Published

    A KINETIC LUMPING APPROACH FOR SOLVENT-BASED LDPE-CRACKING

    Schubert, T., Lehner, M. & Hofer, W., 2017, 9th International Symposium on Feedstock Recycling of Polymeric Materials (9th ISFR 2017).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  242. Published

    A holistic approach for the characterization of coke for optimized usage in the blast furnace ironmaking process

    Bhattacharyya, A. & Schenk, J., 2017.

    Research output: Contribution to conference › Paper › peer-review

  243. Published

    Lumped Kinetic Modeling – Kinetikmodell zur Abschätzung von Produktausbeuten für die lösungsmittelbasierte Pyrolyse von Polyolefinen

    Schubert, T., Lehner, M. & Hofer, W., 2017, Jahrestreffen Frankfurt II Jahrestreffen der ProcessNet-Fachgruppen Abfallbehandlung und Wertstoffrückgewinnung, Energieverfahrenstechnik, Gasreinigung, Hochtemperaturtechnik, Rohstoffe.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  244. Published

    Möglichkeiten und Grenzen von Modellen zur Vorhersage der Auslaugbarkeit von Stahlwerksschlacken

    Höllen, D., Neuhold, S., Mudersbach, D., Schüler, S., Sommerauer, H., Griessacher, T., Dijkstra, J., van Zomeren, A., Presoly, P., Schenk, J. & Pomberger, R., 2017, Mineralische Nebenprodukte und Abfälle: Aschen, Schlacken, Stäube und Baurestmassen. Vol. 4. p. 205-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  245. Published

    Optimization of Coal Briquettes for Lower Reactivity and Higher Strength under Melter-gasifier Conditions

    Bhattacharyya, A., Heckmann, H., Schenk, J. & Wurm, J., 2017.

    Research output: Contribution to conference › Paper › peer-review

  246. Published

    “Sink or float” - Density separation of post- consumer plastics for feedstock recycling

    Bauer, M., Lehner, M., Schwabl, D., Flachberger, H., Kranzinger, L. J., Pomberger, R. & Hofer, W., 2017, Book of Abstracts: 9th international Symposium on Feedstock Recycling of Polymeric Materials, July 10th - 13th, 2017 at VSB-Technical University of Ostrava, Ostrava, Czech Republic. Ostrava, p. 19-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  247. 2016
  248. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Dec 2016, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-6

    Research output: Contribution to journal › Article › Research

  249. Published

    Mass balance study of a multistage process for the carbonation of mineral resources

    Berneder, I., Lehner, M., Capo Tous, F. & Enengel, M., 14 Nov 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  250. Published

    Evaluation of the Potential for Reduction of CO2 Emissions at the Secondary Metallurgy

    Gerasev, A., Bundschuh, P., Schenk, J., Viertauer, A., Trummer, B., Arth, G., Rössler, R. & Reisinger, P., 1 Nov 2016, In: RHI bulletin : the journal of refractory innovations. 2016, 1, p. 28-34 7 p.

    Research output: Contribution to journal › Article › Research

  251. Published

    Thermodynamische Modellierung der Schlackenfahrweise in der Sekundärmetallurgie

    Penz, F., Bundschuh, P., Griessacher, T. & Schenk, J., 13 Oct 2016, Schlacken-Symposium 2016: Kreislaufwirtschaft stabil weiter entwickeln. p. 153-166 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  252. Published

    Hydrogen as Reducing Agent in Ironmaking and Steemaking - Status, Potentials, Challenges

    Schenk, J., 4 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  253. Published

    ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  254. Published

    EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY AND TO REDUCE THE CO2 EMISSION OF THE STEEL PRODUCTION IN EUROPE

    Schenk, J. & Lüngen, H-B., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings. Linz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  255. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Sept 2016, 7th European Coke and Ironmaking Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  256. Published

    2. Zwischenbericht RSA Plastic Reborn

    Schwabl, D., Kranzinger, L., Bauer, M., Flachberger, H., Lehner, M. & Pomberger, R., 16 Aug 2016, Eigenverlag. 49 p.

    Research output: Book/Report › Commissioned report › Research

  257. Published

    Hydrogen as Reducing Agent in Iron and Steel Production - Status, Potentials, Challenges

    Schenk, J., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  258. Published

    Das Erdgasnetz als Energiespeicher für erneuerbare Energie

    Lehner, M., 8 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  259. Published

    Determination of the specific surface area of cokes and chars for simulated process conditions of blast furnace and smelting reduction routes

    Bhattacharyya, A., Schenk, J., Thaler, C. & Stocker, H., Jun 2016, SCANMET V Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  260. Published

    Methanation Process Development utilizing Ceramic Honeycomb Catalysts

    Lehner, M., 20 May 2016.

    Research output: Contribution to conference › Presentation › Research

  261. Published

    Influence of slag properties on the alkali-cycle of a blast furnace

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 16 May 2016, Proceedings of the AISTech 2016. p. 341-352

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  262. Published

    Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions

    Bhattacharyya, A., Schenk, J., Letofsky-Papst, I. & Albering, J., May 2016, Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  263. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies—Part 2: Characterization and Evaluation of Worldwide Traded Fine Iron Ore Brands

    Pichler, A., Mali, H., Plaul, J. F., Schenk, J., Skorianz, M. & Weiss, B., May 2016, In: Steel research international. 87.2016, 5, p. 642-652 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  264. Published

    método para remover co2 de gases de descarga, tais como gases de descarga de plantas para produzir ferro bruto ou gases de descarga de plantas de gás síntese

    Jan-Friedemann, P., Johannes, L. S., Kurt, W. & Robert, M., 26 Apr 2016, IPC No. C01B 32/ 50 A I, Patent No. BR112012005539, Priority date 7 Sept 2010, Priority No. WO2010EP63099

    Research output: Patent

  265. Published

    Examination of the influences on the absorption of SO2 into seawater in a packed mini column and a pilot column

    Wolf, V., Lehner, M. & Draxler, J., 12 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  266. Published

    Bilanzierung eines mehrstufigen Prozesses zur Karbonatisierung mineralischer Rohstoffe

    Niesenbacher, I. & Lehner, M., 30 Mar 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  267. Published

    Bilanzierung eines mehrstufigen Prozesses zur Karbonatisierung mineralischer Rohstoffe

    Niesenbacher, I. & Lehner, M., 30 Mar 2016, 12th Minisymposium Verfahrenstechnik Conference Proceedings. p. 91-94

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  268. Published

    Methanation of CO2 from biogas in Power-to-Gas application

    Medved, A., Biegger, P. & Lehner, M., 30 Mar 2016, p. 123-126. 4 p.

    Research output: Contribution to conference › Poster › Research

  269. Published

    Vergleich der Trägermaterialien y-Al2O3 und t-ZrO2 in der katalytischen Methanisierung von CO2

    Biegger, P., Medved, A. & Lehner, M., 30 Mar 2016, p. 27-30. 4 p.

    Research output: Contribution to conference › Presentation › Research

  270. Published

    Vergleich der Trägermaterialien y-Al2O3 und t-ZrO2 in der katalytischen Methanisierung von CO2

    Biegger, P., Medved, A. & Lehner, M., 30 Mar 2016, 12. Minisymposium Verfahrenstechnik - Conference Proceedings. Graz, p. 27-30 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  271. Published

    Schlacken und Aschen für CO2-Speicherung und Verwertung

    Höllen, D., Stöllner, M., Pleßl, K., Niesenbacher, I., Treimer, R. & Lehner, M., 11 Mar 2016, 6. Wissenschaftskongress Abfall- und Ressurcenwirtschaft. Berlin, p. 97-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  272. Published

    Untersuchung der Einflussparameter auf die Absorption von SO2 in Meerwasser an einer Minifüllkörperkolonne und einer Technikumskolonne

    Wolf, V., Lehner, M., Pesendorfer, S. & Khodier, K., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  273. Published

    Methanisierung im Umfeld von Power-to-Gas

    Biegger, P., Medved, A., Lehner, M., Ebner, H. & Friedacher, A., 10 Feb 2016, Kurzfassungsband 14.Symposium Energieinnovation. Graz, Vol. Kurzfassungsband. p. 463-464 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  274. Published

    RSA Plastic Reborn

    Schwabl, D., Kranzinger, L., Bauer, M., Flachberger, H., Lehner, M. & Pomberger, R., 8 Feb 2016.

    Research output: Contribution to conference › Poster › Research

  275. Published

    Prozesskette zum stofflichen Recycling von Kunststoffabfällen

    Lehner, M. & Bauer, M., 28 Jan 2016.

    Research output: Contribution to conference › Presentation › Research

  276. Published

    Study on Oxide Inclusion Dissolution in Secondary Steelmaking Slags using High Temperature Confocal Scanning Laser Microscopy

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y-B., Bernhard, C. & Schenk, J., Jan 2016, In: Steel research international. 87, 1, p. 57-67

    Research output: Contribution to journal › Article › Research › peer-review

  277. Published

    Einfluss der sekundärmetallurgischen Schlackenchemie auf das Auflösungsverhalten von Al2O3 und MA-Spinell Partikeln in ausgewählten Laborversuchen

    Goriupp, J., Schenk, J., Klösch, G. & Alexander, P., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 3, p. 102 107 p.

    Research output: Contribution to journal › Article › Research

  278. Published

    Karbonatisierung von Aschen und Schlacken zur Erzeugung von Wertstofffraktionen

    Höllen, D., Pleßl, K., Stöllner, M., Sedlazeck, P., Schwarz, T., Berneder, I., Treimer, R. & Lehner, M., 2016, Recy&DepoTech 2016: Tagungsband zur 13. Recy & DepoTech-Konferenz. p. 167-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  279. Published

    Optimierung der Betriebsparameter einer Versuchsanlage am Beispiel Plastic Reborn

    Schwabl, D., Kranzinger, L., Bauer, M., Flachberger, H., Lehner, M., Pomberger, R. & Himler, L., 2016.

    Research output: Contribution to conference › Poster › Research

  280. Published

    Optimierung der Betriebsparameter einer Versuchsanlage am Beispiel Plastic Reborn

    Schwabl, D., Kranzinger, L., Bauer, M., Flachberger, H., Lehner, M., Pomberger, R. & Himler, L., 2016, 12th Minisymposium Verfahrenstechnik at Graz University of Technology: Conference Proceedings. Graz, p. 143-146 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  281. Published

    Prozesskette zum stofflichen Recycling von Kunststoffabfällen

    Lehner, M., Bauer, M. & Hofer, W., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 6, p. 246-251

    Research output: Contribution to journal › Article › Research

  282. Published

    Smart Exergy Leoben

    Steinmüller, H., Tichler, R., Kienberger, T., Gawlik, W., Lehner, M., Muggenhumer, G., Kriechbaum, L., Böckl, B., Winter, A., Biegger, P., Fazeni, K., Goers, S., Vopava, J., Ellersdorfer, M., Medved, A. R. & Mayrhofer, J., 2016, 136 p.

    Research output: Book/Report › Commissioned report › Research

  283. Published

    Weiterentwicklung eines nassmechanischen Aufbereitungsverfahrens für Altkunststofffraktionen

    Schwabl, D., Kranzinger, L., Bauer, M., Flachberger, H., Lehner, M., Pomberger, R., Hofer, W., Himler, L. & Czerniak, M., 2016, Tagungsband zur 13. Recy & DepoTech-Konferenz. Leoben, p. 173-178 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  284. 2015
  285. Published

    processo e dispositivo para a separação de substância sólidas em formato de partículas de uma corrente de gás

    Johannes, L. S., Norbert, R., Robert, M. & Thomas, E., 15 Dec 2015, IPC No. B01D 50/ 00 A I, Patent No. BRPI0919875, Priority date 29 Sept 2009, Priority No. WO2009EP62605

    Research output: Patent

  286. Published

    método e dispositivo para operação de um processo de redução de fundição

    Johannes, L. S., Kurt, W. & Robert, M., 8 Dec 2015, IPC No. F02C 6/ 00 A I, Patent No. BRPI0919615, Priority date 29 Sept 2009, Priority No. WO2009EP62607

    Research output: Patent

  287. Published

    processo para a produção de aglomerados de condutores de ferro finamente particulados

    Hado, H., Hans, H. S., Johannes, L. S. & Christian, B., 1 Dec 2015, IPC No. C22B 5/ 14 A I, Patent No. BRPI0918140, Priority date 17 Aug 2009, Priority No. WO2009EP60609

    Research output: Patent

  288. Published

    Behavior of Chromium, Nickel, Lead, Zinc, Cadmium, and Mercury in the Blast Furnace - A Critical Review of Literature Data and Plant Investigations

    Trinkel, V., Mallow, O., Thaler, C., Schenk, J., Rechberger, H. & Fellner, J., 19 Nov 2015, In: Industrial and engineering chemistry research. 54, 47, p. 11759-11771 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  289. Published

    Evaluation of the capabilities of direct and smelting reduction processes to enhance the energy efficiency of the steel production in Europe

    Schenk, J., 12 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  290. Published

    Wasserstoff als Reduktionsmittel für die Eisen‐ und Rohstahlerzeugung – Ist‐Situation, Potentiale und Herausforderungen

    Schenk, J., 11 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  291. Published

    aparelho para remover o co2 dos gases de exaustão de usinas para produção de ferro gusa.

    Johannes, L. S. & Robert, M., 3 Nov 2015, IPC No. C21B 13/ 00 A I, Patent No. BR212012005399U, Priority date 6 Sept 2010, Priority No. WO2010EP63023

    Research output: Patent

  292. Published

    Untersuchung des Auflöseverhaltens oxidischer Einschlüsse in CaO-Al2O3-SiO2-MgO Schlacken mittels Hochtemperatur-Laser-Scanning Konfokalmikroskopie

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y-B., Bernhard, C. & Schenk, J., 2 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  293. Published

    método para o controle de um processo de transformação

    Bernhard, H. S., Franz, W., Harald, F., Heinrich, R. M., Johannes, L. S., Kurt, W. & Stefan, S., 27 Oct 2015, IPC No. C21B 5/ 00 A I, Patent No. BRPI0915069, Priority date 7 May 2009, Priority No. WO2009EP55545

    Research output: Patent

  294. Published

    Effect of variable process conditions on the reactivity, strength and structural features of blast furnace cokes

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Thaler, C. & Stocker, H., 5 Oct 2015, p. 606-607.

    Research output: Contribution to conference › Paper › peer-review

  295. Published

    Kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Tappeiner, T., Sormann, A. & Wimmer, G., 5 Oct 2015, Asia Steel International Conference 2015 Proceedings. 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  296. Published

    CHALLENGES AND LIMITING FACTOS FOR THE RECYCLING OF STEEL SCRAP IN EUROPE

    Bundschuh, P. & Schenk, J., 1 Oct 2015, MINING THE TECHNOSPHERE: "Drivers and Barriers, Challenges and Opportunities". Lederer, J., Laner, D., Rechberger, H. & Fellner, J. (eds.). 1 ed. Wien, Vol. 1. p. 131-135 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  297. Published

    Contribution of the Chair of Ferrous Metallurgy at the Montanuniversitaet Leoben to Enhance the Sustainability of Steel Production and Application

    Schenk, J., Bernhard, C. & Michelic, S., Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 10, p. 489-494

    Research output: Contribution to journal › Article › Research › peer-review

  298. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies. Part 1: Method for the Determination

    Skorianz, M., Mali, H., Pichler, A., Plaul, F., Schenk, J. & Weiss, B., 28 Sept 2015, In: Steel research international. 87, 5, p. 633-641 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  299. Published

    Ashes and Slags as Secondary Resources for CO2 Capture and Utilization

    Höllen, D., Niesenbacher, I., Treimer, R., Stöllner, M., Melcher, F. & Lehner, M., 11 Sept 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft: MinPet 2015 - Abstracts. Vol. 161. p. 50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  300. Published

    Slags and Ashes as Secondary Resources for CO2 Capture and Utilization

    Höllen, D., Niesenbacher, I., Treimer, R., Stöllner, M., Melcher, F. & Lehner, M., 11 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  301. Published

    Slags and Ashes as Secondary Resources for CO2 Capture and Utilization

    Höllen, D., Niesenbacher, I., Treimer, R., Stöllner, M. & Lehner, M., 7 Sept 2015.

    Research output: Contribution to conference › Poster › Research

  302. Published

    MODEL DEVELOPMENT OF ADDITIVES DISSOLUTION IN THE BOF PROCESS

    Godinho de Carvalho, D. A., Schenk, J. & Adilson Castro, J., 17 Aug 2015, Conference Proceedings ABM Week, August 17th-21st, 2015, Rio de Janeiro, RJ, Brazil.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  303. Published

    Characterization of Ferrous Burden Material for Use in Ironmaking Technologies/Charakterisierung stuckiger Eisentrager fur den Einsatz in der Eisenerzeugung

    Hanel, M., Schenk, J. F., Mali, H., Hauzenberger, F., Thaler, C. M. & Stocker, H., 1 Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 7, p. 316-319 4 p.

    Research output: Contribution to journal › Article › Research

  304. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 17 Jun 2015, Procdeedings 2nd European Steel Technology and Application Days ESTAD. Düsseldorf, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  305. Published

    Effect of Interaction Area on the Thermodynamics and Kinetic Modelling of BOF Converter

    Bundschuh, P., Schenk, J., Schütt, S., Sormann, A. & Panhofer, H., 12 May 2015, Proceedings of The 6th International Congress on the Science and Technology of Steelmaking. p. 151 - 154 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  306. Published

    Chemistry vs. Morphology vs. Reducibility — Some (Non-) Existing Correlations

    Hanel, M., Kain-Bückner, B., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 593-602 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  307. Published

    Experimental Analysis of the Interfacial Wetting Phenomena Between Slag and Coke Surface Under Simulated Conditions of the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Arth, G., Stocker, H. & Thaler, C., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 713-721 077_30431-5159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  308. Published

    Modification of the Billet and Schultes-Model for the hydraulic modelling of random and structured packing

    Wolf, V., Lehner, M. & Hoffmann, K., 28 Apr 2015, Conference proceedings: 2015 Spring Meeting & 11th Global Congress on Process Safety. New York, 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  309. Published

    Hydraulisches Modell zur Berechnung einer neuartigen Gitterstrukturpackung

    Wolf, V. & Lehner, M., 14 Apr 2015, 11. Minisymposium Verfahrenstechnik: Proceedings. Wien: BOKU - Univ. of Natural Resources [u.a.], p. 212 217 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  310. Published

    Influences of the experimental setup configuration on mass transfer measurements in absorption systems

    Wolf, V., Lehner, M. & Hoffmann, K., 13 Apr 2015, In: Chemical Engineering Research and Design. 99, p. 228-235 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  311. Published

    Modifizierung des Billet und Schultes-Modells zur hydraulischen Modellierung von Füllkörpern und Packungen

    Wolf, V., Lehner, M. & Hoffmann, K., 27 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  312. Published

    Einflüsse der Versuchsgestaltung auf Stoffübertragungsmessungen bei Absorptions-Modellsystemen

    Wolf, V., Lehner, M. & Hoffmann, K., 25 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  313. Published

    Gas purging benefits in the BOF: A focus on material efficiency and CO2 emission reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Vol. 2. p. 2031-2040 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  314. Published

    Impact of different heat capacity functions on thermodynamic and kinetic modeling of the basic oxygen furnace

    Bundschuh, P., Schenk, J., Schütt, S., Panhofer, H. & Sormann, A., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Association for Iron and Steel Technology, AISTECH, Vol. 2. p. 2090-2098 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  315. Published

    Book of Abstracts: 8th International Symposium on Feedstock Recycling of Polymeric Materials, September 7th - 10th, 2015 at Montanuniversitaet Leoben, Leoben, Austria

    Bauer, M. & Lehner, M. (ed.), 2015, Leoben. 167 p.

    Research output: Book/Report › Anthology › Research

  316. Published

    Depolymerisation von polyolefinreichen Kunststoffabfällen durch lösungsmittelbasiertes thermisches Cracken

    Schubert, T. & Lehner, M., 2015, Tagungsband des 11. Minisymposiums Verfahrenstechnik.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  317. Published

    Effect of alkaline elements on the reactivity, strength and structural properties of blast furnace cokes

    Bhattacharyya, A., Schenk, J., Rantitsch, G., Thaler, C. & Stocker, H., 2015, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 54, 3, p. 503-506

    Research output: Contribution to journal › Article › Research › peer-review

  318. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 2015, In: RHI bulletin : the journal of refractory innovations. 1, p. 37-42 6 p.

    Research output: Contribution to journal › Article › Research

  319. Published

    MECHANISM AND INFLUENCES OF SOLVENT-BASED THERMAL CRACKING OF POLYOLEFIN-RICH POST-CONSUMER PLASTICS

    Schubert, T. & Lehner, M., 2015, Book of Abstracts of the 8th International Symposium on Feedstock Recycling of Polymeric Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  320. Published

    Mechanical preparation of post-consumer plastics for feedstock recycling

    Bauer, M., Lehner, M. & Hofer, W., 2015, Book of Abstracts: 8th international Symposium on Feedstock Recycling of Polymeric Materials, September 7th - 10th, 2015 at Montanuniversitaet Leoben, Austria. Leoben, p. 49-52

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  321. Published

    Standardized Iron Ore Characterization Methodology for Metallurgy

    Kolb, F., Mali, H., Pichler, A. & Schenk, J., 2015, In: Practical metallography = Praktische Metallographie. 52, p. 5-20

    Research output: Contribution to journal › Article › Research › peer-review

  322. Published

    Thermochemical modelling of the alkali balance in modern blast furnaces

    Pichler, A., Schenk, J., Hauzenberger, F., Thaler, C. & Stocker, H., 2015, ASIA Steel International Conference 2015 - Proceedings. 7A-7: Iron and Steel Institute of Japan

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  323. Published

    Untersuchungen zum Löseprozess mineralischer Rohstoffe

    Niesenbacher, I. & Lehner, M., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  324. Published

    Untersuchungen zum Löseprozess mineralischer Rohstoffe

    Niesenbacher, I. & Lehner, M., 2015, Proceedings 11. Minisymposium Verfahrenstechnik. Wieb: BOKU - Univ. of Natural Resources [u.a.], p. 235-238

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  325. Published

    Utilization potential of ultramafic rocks in Austria in view of hydrometallurgical processing and mineral carbonation

    Treimer, R., Melcher, F., Moser, P., Niesenbacher, I., Lehner, M. & Höllen, D., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Vol. 161. p. 124

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  326. 2014
  327. Published

    Transport und Speicherung von Wasserstoff im Erdgasnetz

    Felder, A., Biegger, P. & Lehner, M., 24 Sept 2014, Leoben. 54 p.

    Research output: Book/Report › Commissioned report › Transfer

  328. Published

    Research Studio Austria - Karbonatisierung mineralischer Rohstoffe

    Niesenbacher, I. & Lehner, M., 17 Jun 2014, 10. Minisymposium der Verfahrenstechnik Proceedings. Wien, p. 103-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  329. Published

    Research Studio Austria - Karbonatisierung mineralischer Rohstoffe

    Niesenbacher, I. & Lehner, M., 17 Jun 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  330. Published

    PROCESSO E DISPOSITIVO PARA PRODUÇÃO DE MATERIAL FUNDIDO

    Franz, H., Johannes, S., Martin, S., Bogdan, V., Kurt, W., Johann, W., Robert, M. & Norbert, R., 29 Apr 2014, IPC No. C21B 13/ 00 A I, Patent No. BRPI0719882, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  331. Published

    PROCESSO E DISPOSITIVO PARA PRODUÇÃO DE MATERIAL FUNDIDO

    Franz, H., Robert, M., Norbert, R., Johannes, S., Martin, S., Bogdan, V., Kurt, W. & Johann, W., 15 Apr 2014, IPC No. C21B 13/ 14 A I, Patent No. BRPI0719172, Priority date 1 Oct 2007, Priority No. WO2007EP08514

    Research output: Patent

  332. Published

    Editorial

    Kepplinger, W. & Schenk, J., 1 Apr 2014, In: Steel research international. 85, 4, 1 p.

    Research output: Contribution to journal › Editorial › peer-review

  333. Published

    Assessing the quality of metallurgical coke by Raman Spectroscopy

    Rantitsch, G., Bhattacharyya, A., Schenk, J. & Lünsdorf, K., 2014, In: International journal of coal geology. 130, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  334. Published

    Behaviour of chars from non-coking coals under different conditions of smelting reduction processes

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, Proceedings of 4th VDEh-CSM Conference on Metallurgical Fundamentals. p. 58-65

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  335. Published

    Characterization and assessment of lump COREX® chars under various process conditions

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, ESTAD and JSI 2014 - Abstract Booklet. p. 324-325

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  336. Published

    DEVELOPMENT OF AN UPSCALABLE RECYCLING PROCESS FOR POLYOLEFINS AND OTHER POST-CONSUMER PLASTIC FRACTIONS VIA SOLVENT-BASED DEPOLYMERIZATION

    Lederer, C., Lehner, M. & Hofer, W., 2014, In: Journal of Material Cycles and Waste Management.

    Research output: Contribution to journal › Article › Research › peer-review

  337. Published

    Dissolution behavior of CaO in BOF-process and its effect on the kinetics of metallurgical reactions

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H., Sormann, A. & Klösch, G., 2014, Seminar on Metallurgical Fundamentals. p. 106-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  338. Published

    Effect of alkaline elements on the reactivity, strength and structural properties of blast furnace cokes

    Bhattacharyya, A., Schenk, J., Rantitsch, G., Thaler, S. & Stocker, H., 2014, Proceedings of SHMD 2014. p. 412-412

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  339. Published

    Einflüsse auf Stoffaustauschversuche bei Füllkörpern und Packungen

    Wolf, V. & Lehner, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  340. Published

    Einflüsse bei der experimentellen Bestimmung der Stoffaustauscheigenschaften von Füllkörpern und Packungen

    Wolf, V. & Lehner, M., 2014, Proceedings of the 10th Minisymposium Verfahrenstechnik. p. 154-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  341. Published

    Entwicklung eines katalytischen Prozesses zur Methanisierung von CO2 aus industriellen Quellen

    Biegger, P., Felder, A. & Lehner, M., 2014, Chemie Ingenieur Technik Special Issue: ProcessNet-Jahrestagung 2014 und 31. DECHEMA-Jahrestagung der Biotechnologen Volume 86, Issue 9, pages 1430–1431, September, 2014. p. 1430-1431

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  342. Published

    Entwicklung eines nassen mechanischen Aufbereitungsverfahrens zur Bereitstellung einer polyolefinreichen Altkunststofffraktion für das chemische Recycling

    Bauer, M. & Lehner, M., 2014, 10. Minisymposium der Verfahrenstechnik - Proceedings. p. 7-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  343. Published

    Image analysis for evaluation of iron ore carriers

    Kain-Bückner, B., Mali, H., Schenk, J., Hanel, M., Thaler, C., Stocker, H. & Hauzenberger, F., 2014, Sonderbände der Praktischen Metallographie 46. p. 215-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  344. Published

    Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H. & Sormann, A., 2014, Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process. p. 89-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  345. Published

    Influence of alkalis on mechanical properties of lumpy iron carriers during reduction

    Pichler, A., Schenk, J., Hanel, M., Mali, H., Thaler, C., Hauzenberger, F. & Stocker, H., 2014, Conference Proceedings to the 23rd International Conference on Metallurgy and Materials. p. 40-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  346. Published

    Influences of the experimental setup configuration on mass transfer measurements in absorption systems

    Wolf, V., Lehner, M. & Hoffmann, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  347. Published

    Influences of the experimental setup configuration on mass transfer measurements in absorption systems

    Wolf, V., Lehner, M. & Hoffmann, K., 2014, 10th International Conference on Distillation and Absorption 2014 - Book of Full Papers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  348. Published

    Methan als Speicher für erneuerbare Energien und zur CO2-Verwertung

    Biegger, P., Felder, A. & Lehner, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  349. Published

    Methan als Speicher für erneuerbare Energien und zur CO2-Verwertung

    Biegger, P., Felder, A. & Lehner, M., 2014, DepoTech 2014: Abfallwirtschaft, Abfallverwertung und Recycling, Deponietechnik und Altlasten ; Tagungsband zur 12. DepoTech Konferenz, Montanuniversität Leoben, Österreich, 4. - 7. November 2014 . p. 665-668

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  350. Published

    Methan als Speicher für erneuerbare Energien und zur CO2-Verwertung

    Biegger, P., Felder, A. & Lehner, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  351. Published

    Methanisierung von CO2 als chemischer Energiespeicher

    Biegger, P., Felder, A. & Lehner, M., 2014, Tagungsband des 10. Minisymposium Verfahrenstechnik. p. 83-86

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  352. Published

    Power to Gas - eine Systemanalyse

    Steinmüller, H., Tichler, R., Friedl, C., Furtlehner, M., Lindorfer, J., Schwarz, M., Koppe, M., Biegger, P., Felder, A., Lehner, M., Harasek, M., Makaruk, A., Miltner, M., Fraubaum, M., Haider, M., Begluk, S., Gawlik, W., Haas, R. & Ajanovic, A., 2014, 390 p.

    Research output: Book/Report › Commissioned report › Research

  353. Published

    Power-to-Gas: Technology and Business Models

    Lehner, M., Tichler, R., Steinmüller, H. & Koppe, M., 2014

    Research output: Book/Report › Book › Research

  354. Published

    Reducibility of a Hematitic Lump Ore at different near Blast Furnace Conditions

    Hanel, M., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 2014, 1st ESTAD & 31st JSI . p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  355. Published

    Stoffliches Recycling Polyolefin-reicher Kunststofffraktionen

    Lehner, M., Bauer, M. & Hofer, W., 2014, DepoTech 2014 - Abfallwirtschaft, Abfallverwertung und Recycling, Deponietechnik und Altlasten - Tagungsband zur 12. DepoTech- Konferenz. p. 593-598

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  356. Published

    Thermochemical Calculation of the Quaternary CaO–SiO2–Al2O3–MgO System at 1600°C for Predicting the MgO-Saturation and MgO–MgO · Al2O3 Equilibrium of Secondary Metallurgical Slag

    Goriupp, J., Schenk, J., Klösch, G. & Hiebler, M., 2014, In: Steel research international. 85, p. 564-569

    Research output: Contribution to journal › Article › Research › peer-review

  357. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 1: The Description of the BOF Model

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 537-543

    Research output: Contribution to journal › Article › Research › peer-review

  358. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 2: The Model Validation

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 544-563

    Research output: Contribution to journal › Article › Research › peer-review

  359. 2013
  360. Published

    Abtrennung von Polyolefinen aus kunststoffreichen Abfallströmen mittels NIR- sensorbasierten Sortiertechnologie und Sortierzentrifuge

    Bauer, M. & Lehner, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  361. Published

    Abtrennung von Polyolefinen aus kunststoffreichen Abfallströmen mittels NIR- sensorbasierten Sortiertechnologie und Sortierzentrifuge

    Bauer, M. & Lehner, M., 2013, 9. Minisymposium der Verfahrenstechnik - Tagungsband. p. 92-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  362. Published

    Application of Thermodynamic and Kinetic Model for Converter Steelmaking to Optimize Manganese Yield in Crude Steel

    Lytvynyuk, Y., Schenk, J., Hiebler, M., Mizelli, H. & Sormann, A., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 457-458

    Research output: Contribution to journal › Article › Research › peer-review

  363. Published

    COMPARISON OF SOLVENT-BASED POST-CONSUMER PLASTICS DEPOLYMERIZATION TO STATE-OF-THE-ART TECHNOLOGIES

    Lederer, C. & Lehner, M., 2013, COMPARISON OF SOLVENT-BASED POST-CONSUMER PLASTICS DEPOLYMERIZATION TO STATE-OF-THE-ART TECHNOLOGIES. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  364. Published

    Characterization of Different Lump Ore Brands According to Industrial Scale Process Conditions by Means of Reducibility Testing and Morphological Investigation

    Hanel, M., Skorianz, M., Schenk, J., Mali, H., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, AISTech 2013 Proceedings. p. 447-456

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  365. Published

    Characterization of burden material for ironmaking by means of reduction tests with morphological characterization

    Hanel, M., Mali, H., Thaler, C., Stocker, H., Hauzenberger, F., Skorianz, M. & Schenk, J., 2013, The ISIJ-VDEh-Jernkontoret Joint Symposium. p. 145-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  366. Published

    Charakterisierung von Rohmaterialien für die Eisenerzherstellung mit Bildverarbeitung

    Hanel, M., Kain-Bückner, B., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 445-446

    Research output: Contribution to journal › Article › Research › peer-review

  367. Published

    Das Auflösungsverhalte von Al2O3 und MgO*Al2O3 Partikeln mit definierter Oberfläche in hoch MgO-hätligen sekundärmetallurgischen Pfannenschlacken

    Goriupp, J. & Schenk, J., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 468-469

    Research output: Contribution to journal › Article › Research › peer-review

  368. Published

    EE-Methan aus CO2: Entwicklung eines katalytischen Prozesses zur Methanisierung von CO2 aus industriellen Quellen

    Biegger, P., Felder, A. & Lehner, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  369. Published

    EE-Methan aus CO2: Entwicklung eines katalytischen Prozesses zur Methanisierung von CO2 aus industriellen Quellen

    Biegger, P., Felder, A. & Lehner, M., 2013, Book of Abstracts zum 9. Minisymposium der Verfahrenstechnik. p. 105-107

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  370. Published

    Einflüsse bei der experimentellen Bestimmung der hydraulischen Parameter von Füllkörpern und Packungen

    Wolf, V. & Lehner, M., 2013, 9. Minisymposium der Verfahrenstechnik, Book of Abstracts. p. 73-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  371. Published

    Einflüsse bei der hydraulischen Vermessung von Füllkörpern und Packungen

    Wolf, V. & Lehner, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  372. Published

    Enhancement of Efficiency in Crude Iron Production Using an Increased Amount of Pellet Feed

    Schmidt, L., Köpplmayr, D., Plaul, F. & Schenk, J., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 449-450

    Research output: Contribution to journal › Article › Research › peer-review

  373. Published

    Evaluation of an Upscalable Process Concept for Solvent-based Thermal Depolymerization of Polyolefins in Pilot Plant Test Series

    Lederer, C. & Lehner, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  374. Published

    Industrial Gas Cleaning Processes - Trends and Perspectives

    Lehner, M., 2013, Filtech 2013. p. 9-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  375. Published

    Laseroptisches Messsystem am Lehrstuhl für Verfahrenstechnik des Industriellen Umweltschutzes

    Rieger, J. & Lehner, M., 2013, In: vju. 26.04.2013, p. 6-7

    Research output: Contribution to journal › Article › Research › peer-review

  376. Published

    Post- consumer plastics in Austria and their potential for chemical recycling

    Bauer, M. & Lehner, M., 2013, ISWA World Congress 2013 Vienna. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  377. Published

    Power-to-Gas: Eine Option zur chemischen Speicherung und zum Transport von erneuerbaren Energien

    Lehner, M. & Steinmüller, H., 2013, Ressourceneffizienz Konzepte, Anwendungen und Best-Practice Beispiele. p. 7-17

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  378. Published

    Review of post-consumer plastic preparation in Austria and new approaches for feedstock recycling

    Bauer, M. & Lehner, M., 2013, Abstracts. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  379. Published

    Structural Characterization of Metallurgical Coke by Raman Spectroscopy

    Rantitsch, G., Schenk, J., Lünsdorf, K., Bhattacharyya, A., Hanel, M., Wallner, D. & Kaltenböck, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 447-448

    Research output: Contribution to journal › Article › Research › peer-review

  380. Published

    Vergleich der Trocken- und Nasssortierung von Altkunststofffraktionen zur Erzeugung eines polyolefinreichen Feedstocks für das rohstoffliche Recycling

    Bauer, M. & Lehner, M., 2013, O.Universitätsprofessor Dr. Karl E. Lorber Festschrift zur Emeritierung. p. 139-150

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  381. 2012
  382. Published

    Sind Direktreduktions- und Schmelzreduktionsverfahren Optionen für eine zukünftige effiziente Stahlerzeugung in Europa?

    Schenk, J., 8 Nov 2012.

    Research output: Contribution to conference › Presentation › Research

  383. Published

    Hydrodynamic and Mass Transfer Processes of a New Grid-Structured Plastic Packing

    Wolf, V., Lehner, M. & Hoffmann, K., 22 Jun 2012.

    Research output: Contribution to conference › Presentation › Research › peer-review

  384. Published

    Verfahren und Vorrichtung zur Herstellung von zumindest teilweise reduzierten Metallerzen und/oder Metallen

    Schenk, J., Eder, T., Hauzenberger, F. & Millner, R., 15 Mar 2012, Patent No. A795/2010

    Research output: Patent

  385. Published

    Integration of the blast furnace route and the FINEX ®- process for low CO 2 hot metal production

    Thaler, C., Tappeiner, T., Schenk, J. L., Kepplinger, W. L., Plaul, J. F. & Schuster, S., 1 Feb 2012, In: Steel research international. 83, 2, p. 181-188 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  386. Published

    Altkunststoffe - Stoffströme, Aufbereitung und Verwertung

    Bauer, M. & Lehner, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  387. Published

    Altkunststoffe - Stoffströme, Aufbereitung und Verwertung

    Bauer, M. & Lehner, M., 2012, 8. Minisymposium der Verfahrenstechnik - Book of Abstracts. p. 77-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  388. Published

    Carbon Capture and Utilization (CCU) - Verfahrenswege und deren Bewertung

    Lehner, M., Ellersdorfer, M., Treimer, R., Moser, P., Theodoridou, V. & Biedermann, H., 2012, EnInnov2012 - 12. Symposium Energieinnovation, Alternativen für die Energiezukunft Europas. p. 178-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  389. Published

    Carbon Capture and Utilization (CCU) - Verfahrenswege und deren Bewertung

    Lehner, M., Ellersdorfer, M., Treimer, R., Moser, P., Theodoridou, V. & Biedermann, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 63-69

    Research output: Contribution to journal › Article › Research › peer-review

  390. Published

    Classification of fine ores regarding their reducibility with tests in a lab scale fluidized bed reactor and petrographical analysis

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F. & Thaler, C., 2012, AIST 2012 Proceedings. p. 531-542

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  391. Published

    Comparison of Basic Oxygen Furnace Bottom Gas Purging Options

    Kollmann, T., Jandl, C., Schenk, J., Mizelli, H., Höfer, W., Viertauer, A. & Hiebler, M., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 8-15

    Research output: Contribution to journal › Article › Research › peer-review

  392. Published

    Dynamic Refractory Wear Test Method for Magnesia-Carbon Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  393. Published

    Evaluation of reducibility of iron ore fines by reduction tests under fluidized bed conditions and petrographical investigations

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F., Weiss, B. & Hanel, M., 2012, Proceedings of Asia Steel Conference 2012. p. 000-000

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  394. Published

    Forschungsschwerpunkt Recycling an der Montanuniversität Leoben

    Flachberger, H., Antrekowitsch, H., Lehner, M., Lorber, K., Pomberger, R. & Raupenstrauch, H., 2012, Recycling und Rohstoffe. p. 291-314

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  395. Published

    Hydrodynamic and Mass Transfer Processes of the Grid-Structured Plastic Packing Hiflow Plus

    Wolf, V., Lehner, M. & Hoffmann, K., 2012,

    11th World Filtration Congress & Exhibition, USB-Stick

    .     p. G14-01-1-G14-01-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  396. Published

    Hydrodynamic and Mass Transfer Processes of the Grid-Structured Plastic Packing Hiflow Plus

    Wolf, V., Lehner, M. & Hoffmann, K., 2012,

    11th World Filtration Congress & Exhibition, Abstract Book

    .     p. 51-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  397. Published

    Integration of the Blast Furnace Route and the FINEX-Process for Low CO2 Hot Metal Production

    Thaler, C., Tappeiner, T., Schenk, J., Kepplinger, W., Plaul, J. F. & Schuster, S., 2012, In: Steel research international. 83, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  398. Published

    Mineralogical and structural evolution of iron ore fines reduced in a lab scale fluidized bed reactor

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F., Pichler, A. & Hanel, M., 2012, Proceedings of 6th International Congress on the Science and Technology of Ironmaking - ICSTI. p. 2347-2359

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  399. Published

    Quantifying of a Dynamic Refractory Wear Test Setup for MgO-C Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 340-344

    Research output: Contribution to journal › Article › Research › peer-review

  400. Published

    The importance of sulfur in the iron and steel industry

    Goriupp, J. & Schenk, J., 2012, The XII. International Symposium for Desulfurization of Hot Metal and Steel. p. 33-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  401. Published

    Thermodynamic and Kinetic Simulation of the Manganese Ore Addition in the Steelmaking Converter

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2012, Asia Steel 2012. p. 49-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  402. Published

    Von CCS zu CCU - Verfahrenswege zur CO2-Nutzung

    Biegger, P., Lehner, M. & Ellersdorfer, M., 2012, In: vju. 07.05.2012, p. 11-13

    Research output: Contribution to journal › Article › Research › peer-review

  403. Published

    Von CCS zu CCU - Verfahrenswege zur CO2-Nutzung

    Biegger, P., Ellersdorfer, M. & Lehner, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  404. Published

    Von CCS zu CCU - Verfahrenswege zur CO2-Nutzung

    Biegger, P., Ellersdorfer, M. & Lehner, M., 2012, Book of Abstracts - 8. Minisymposium Verfahrenstechnik. p. 86-91

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  405. 2011
  406. Published

    Verfahren zur Entfernung von CO2 aus Abgasen von Anlagen zur Roheisenherstellung

    Schenk, J. & Millner, R., 15 Apr 2011, Patent No. A.1440/2009

    Research output: Patent

  407. Published

    PROCESS AND DEVICE FOR PRODUCING PIG IRON OR LIQUID STEEL PRECURSORS.

    Johannes, L. S., Jan-Friedemann, P. & Christian, B., 5 Apr 2011, IPC No. C21B 13/ 00 A I, Patent No. MX2010013382, Priority date 27 Apr 2009, Priority No. WO2009EP55047

    Research output: Patent

  408. Published

    Düse zum Eindüsen von sauerstoffhaltigem Gas in ein Roheisenaggregat mit Kantenschutz durch auswechselbares Einsatzstück

    Schenk, J., Aichinger, G., Berner, F., Lechner, S., Lekic-Ninic, M., Plaul, J-F., Schmidt, M., Söntgen, T., Vuletic, B., Wieder, K. & Wurm, J., 15 Mar 2011, Patent No. A 1862/2008

    Research output: Patent

  409. Published

    Balance model of the Finex process to estimate the overall energy consumption of the process

    Thaler, C., Schenk, J. & Plaul, J. F., 15 Feb 2011, In: Stahl und Eisen. 131, 2, p. 31-37

    Research output: Contribution to journal › Article › Research › peer-review

  410. Published

    Structural and morphological changes during reduction of hematite to magnetite and wustite in hydrogen rich reduction gases under fluidised bed conditions

    Weiss, B., Sturn, J., Voglsam, S., Strobl, S., Mali, H., Winter, F. & Schenk, J., Jan 2011, In: Ironmaking and steelmaking. 38.2011, 1, p. 65-73 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  411. Published

    Bilanzmodell des FINEX-Prozesses ermöglicht die Abschätzung des Gesamtenergieverbrauchs

    Thaler, C., Schenk, J. & Plaul, J. F., 2011, In: Stahl und Eisen. 131, p. 31-37

    Research output: Contribution to journal › Article › Research › peer-review

  412. Published

    Carbon Capture and Utilization, Vorstudie

    Antrekowitsch, H., Biedermann, H., Ellersdorfer, M., Hofstätter, H., Lehner, M., Matthäi, S., Moser, P., Oberndorfer, M., Theodoridou, V., Treimer, R. & Wagner, C., 2011

    Research output: Book/Report › Commissioned report › Transfer

  413. Published

    Hydraulisches Modell und Rechenprogramm für Stoffaustauscheinbauten

    Lehner, M. & Wolf, V., 2011, In: vju. p. 30-31

    Research output: Contribution to journal › Article › Research › peer-review

  414. Published

    Hydrodynamic and mass transfer characteristic of a novel grid-structured plastic packing

    Lehner, M., Hoffmann, K. & Geipel, W., 2011, In: Heat and mass transfer. 47, p. 1035-1041

    Research output: Contribution to journal › Article › Research › peer-review

  415. Published

    Industrial fluidised bed direct reduction kinetics of hematite ore fines in H2 rich gases at elevated pressure

    Weiss, B., Sturn, J., Voglsam, S., Winter, F. & Schenk, J., 2011, In: Chemical engineering science : Génie chimique. 66.2011, 4, p. 703-708 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  416. Published

    Recent status of fluidized bed technologies for producing iron input materials for steelmaking

    Schenk, J., 2011, In: Particuology. 9, 1, p. 14-23

    Research output: Contribution to journal › Article › Research › peer-review

  417. Published

    Reduction Technologies for the Recycling of Iron and Steel Residues

    Schenk, J., 2011, 3. Seminar Networking between Zinc and Steel. p. 63-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  418. Published

    Thermodynamic and Kinetic Modelling of the Devan adization Process in the Steelmaking Converter

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2011, 6th European Oxygen Steelmaking Conference 2011 (EOSC 2011). p. 657-664

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  419. Published

    Usage of FINEX® LRI (low reduced iron) in the blast furnace

    Thaler, C., Tappeiner, T., Schenk, J., Kepplinger, W., Plaul, J. F. & Schuster, S., 2011, 2nd International Conference and Exhibition on Clean Technologies in the Steel Industry. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  420. 2010
  421. Published

    Verfahren und Vorrichtung zum Abtrennen von partikelförmigen Feststoffen von einem Gasstrom

    Schenk, J., Eder, T., Millner, R. & Rein, N., 15 Nov 2010, Patent No. A 1659/2008

    Research output: Patent

  422. Published

    Verfahren zur Herstellung von Agglomeraten

    Schenk, J., Böhm, C., Heckmann, H. & Stiasny, H. H., 15 Sept 2010, Patent No. A 1419/2008

    Research output: Patent

  423. Published

    Instalacion y procedimiento para la depuracion de gas de proceso para una instalacion de fusion por reduccion, que comprende una instalacion conjunta para la separacion por goteo en la que desembocan tanto el primer sistema de lavado que conduce el gas de alto horno como tambien el segundo sistema de lavado que conduce el gas generador.

    Martin, S., Kurt, W., Johann, W., Sin-Myoung, K. & Johannes, L. S., 4 Jun 2010, IPC No. C21B 13/ 14 A I, Patent No. CL2009001489, Priority date 27 Jun 2008, Priority No. AT20080001026

    Research output: Patent

  424. Published

    Metodo y planta para obtener arrabio o productos de acero liquido que comprende fundir una primera porcion de insumos ferrosos parcilamente reducidos en un reactor de fusion, con aporte de portadores de carbono y gas que contiene oxigeno, y alimentar una segunda porcion de insumos ferrosos parcialmente reducidos a un reactor a un reactor de reduccion de fusion.

    Christian, B., Jan-Friedemann, P. & Johannes, L. S., 4 Jun 2010, IPC No. F27B 1/ 00 A I, Patent No. CL2009001362, Priority date 6 Jun 2008, Priority No. AT20080000920

    Research output: Patent

  425. Published

    Procedimiento para el analisis microscopico de sustancias añadidas para un proceso de transformacion, para producir productos metalurgicos empleando gases de proceso, en una o varias etapas, con ondas electro-magneticas polarizadas o no polarizadas, o microscopia electronica, empleando en el analisis multietapas luz polarizada en direcciones diferentes.

    Johannes, S., Kurt, W., Harald, F., Heinrich, M., Stefan, S., Bernhard, S. & Franz, W., 4 Jun 2010, IPC No. G05D 21/ 00 A I, Patent No. CL2009001374, Priority date 6 Jun 2008, Priority No. AT20080000921

    Research output: Patent

  426. Published

    Nozzle for injecting gas containing oxygen into a pig iron device having an injector insertion pipe

    Johann, W., Stefan, L., Marinko, L-N., Georg, A., Franz, B., Jan-Friedemann, P., Johannes, L. S., Martin, S., Thomas, S., Bogdan, V. & Kurt, W., 3 Jun 2010, IPC No. F27D 3/ 16 A I, Patent No. AU2009319139, Priority date 5 Nov 2009, Priority No. WO2009EP64685

    Research output: Patent

  427. Published

    Verfahren zur Steuerung eines Transformationsverfahrens

    Schenk, J., Fischer, H., Mali, H., Schuster, S., Spuida, B. H., Wieder, K. & Winter, F., 15 May 2010, Patent No. A 921/2008

    Research output: Patent

  428. Published

    Method and device for operating a smelting reduction process

    Robert, M., Schenk, J. L. & Kurt, W., 29 Apr 2010, IPC No. F02C 6/ 00 A I, Patent No. AU2009306565, Priority date 29 Sept 2009, Priority No. WO2009EP62607

    Research output: Patent

  429. Published

    Method and device for separating particulate solids from a gas flow

    Eder, T., Robert, M., Rein, N. & Johannes, L. S., 29 Apr 2010, IPC No. B01D 50/ 00 A I, Patent No. AU2009306564, Priority date 29 Sept 2009, Priority No. WO2009EP62605

    Research output: Patent

  430. Published

    Process for producing agglomerates of finely particulate iron carriers

    Heckmann, H., Christian, B., Johannes, L. S. & Stiasny, H. H., 18 Mar 2010, IPC No. C22B 5/ 14 A I, Patent No. AU2009291046, Priority date 17 Aug 2009, Priority No. WO2009EP60609

    Research output: Patent

  431. Published

    Prozessgas-Reinigungseinrichtung für eine Schmelzreduktionsanlage zur Gewinnung von Roheisen

    Schenk, J., Kang, S. M., Schmidt, M. & Wurm, J., 15 Mar 2010, Patent No. A 1026/2008

    Research output: Patent

  432. Published

    Verfahren und Vorrichtung zur Herstellung von Roheisen und flüssigen Stahlvorprodukten

    Schenk, J., Böhm, C. & Jan-Friedemann, P., 15 Mar 2010, Patent No. A 920/2008

    Research output: Patent

  433. Published

    Experimental and morphological investigations of the reduction from coarse hematite to magnetite and wustite under fluidized bed conditions

    Weiss, B., Sturn, J., Voglsam, S., Strobl, S., Mali, H., Winter, F. & Schenk, J., 1 Feb 2010, In: Steel research international. 81, 2, p. 93-99 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  434. Published

    Method and device for producing molten material

    Hauzenberger, F., Rein, N., Wieder, K., Schenk, J., Vuletic, B., Schmidt, M., Wurm, J. & Millner, R., 27 Jan 2010, IPC No. C21B 13/ 14 A I, Patent No. CN101636510, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  435. Published

    Bilanzmodell des FINEX®-Prozesses zur Abschätzung von CO2-Emissionen

    Thaler, C., Schenk, J. & Plaul, J. F., 2010, DepoTech 2010. p. 649-653

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  436. Published

    Bilanzmodell des FINEX®-Prozesses zur Abschätzung von CO2-Emissionen

    Thaler, C., Plaul, J. F. & Schenk, J., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  437. Published

    Influence of Auxiliary Fuel Injection to Tuyeres on Flame Temperature and Flooding Limits in the FINEX® Process: A Theoretical Investigation

    Schenk, J., Ahn, S-G. & Thaler, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 518-522

    Research output: Contribution to journal › Article › Research › peer-review

  438. Published

    Linking of Computer Assisted Thermodynamics with Automated SEM/EDS Measurements for the Characterization of Non-Metallic Inclusions in Steel

    Wiener, J., Wieser, G. & Schenk, J., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  439. 2009
  440. Published

    Method of controlling a transformation process

    Stefan, S., Spuida, B. H., Wieder, K., Johannes, L. S., Mali, H. R., Kurt, W., Winter, F. & Fischer, H., 10 Dec 2009, IPC No. C21B 5/ 00 A I, Patent No. AU2009254074, Priority date 7 May 2009, Priority No. WO2009EP55545

    Research output: Patent

  441. Published

    Process and device for producing pig iron or liquid steel precursors

    Schenk, J. L., Jan-Friedemann, P. & Christian, B., 10 Dec 2009, IPC No. C21B 13/ 00 A I, Patent No. AU2009254062, Priority date 27 Apr 2009, Priority No. WO2009EP55047

    Research output: Patent

  442. Published

    Obituary for Prof. Wilfried Krieger

    Schenk, J., Dec 2009, In: Steel research international. 80, 12, p. 866-866

    Research output: Contribution to journal › Article › Research › peer-review

  443. Published

    Method and device for producing liquid pig iron or liquid steel precursor products

    Georg, A., Wieder, K., Schenk, J. L., Hado, H., Martin, S., Wurm, J., Hado, H., Eder, T., Robert, M. & Johann, W., 24 Sept 2009, IPC No. F27D 17/ 00 A I, Patent No. AU2009226806, Priority date 30 Jan 2009, Priority No. WO2009EP51058

    Research output: Patent

  444. Published

    Method and device for producing molten material

    Hauzenberger, F., Millner, R., Rein, N., Schenk, J., Schmidt, M., Vuletic, B., Wieder, K. & Wurm, J., 9 Sept 2009, IPC No. C21B 13/ 00 A I, Patent No. CN101528948, Priority date 13 Oct 2006, Priority No. DE20061048601

    Research output: Patent

  445. Published

    VERFAHREN UND VORRICHTUNG ZUR HERSTELLUNG VON GESCHMOLZENEM MATERIAL

    Schenk, J., Hauzenberger, F., Millner, R., Rein, N., Schmidt, M., Vuletic, B., Wieder, K. & Wurm, J., 29 Jul 2009, Patent No. 07818595.6

    Research output: Patent

  446. Published

    METHOD AND DEVICE FOR PRODUCING MOLTEN MATERIAL.

    Bogdan, V., Kurt, W., Johann, W., Franz, H., Robert, M., Norbert, R., Martin, S. & Johannes, L. S., 22 Apr 2009, IPC No. C21B 13/ 00 A I, Patent No. MX2009003732, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  447. Published

    METHOD AND DEVICE FOR PRODUCING MOLTEN MATERIAL.

    Bogdan, V., Kurt, W., Johann, W., Franz, H., Robert, M., Norbert, R., Martin, S. & Johannes, L. S., 22 Apr 2009, IPC No. C21B 13/ 14 A I, Patent No. MX2009003725, Priority date 1 Oct 2007, Priority No. WO2007EP08514

    Research output: Patent

  448. Published

    Empirical reduction diagrams for reduction of iron ores with H2 and CO gas mixtures considering non-stoichiometries of oxide phases

    Weiss, B., Sturn, J., Winter, F. & Schenk, J. L., Apr 2009, In: Ironmaking and steelmaking. 36.2009, 3, p. 212-216 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  449. Published

    Evaluation of the Limiting Regime in Iron Ore Fines Reduction with H2-Rich Gases in Fluidized Beds: Fe2O3 to Fe3O4

    Sturn, J., Voglsam, S., Weiss, B., Schenk, J. & Winter, F., 25 Feb 2009, In: Chemical Engineering & Technology. 32.2009, 3, p. 392-397 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  450. Published

    Fluidized-bed technology for the production of iron products for steelmaking

    Plaul, F. J., Böhm, C. & Schenk, J. L., 1 Feb 2009, In: Journal of the Southern African Institute of Mining and Metallurgy. 109, 2, p. 121-128 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  451. Published

    Method and device for producing metals and/or metals initial products

    Schmidt, M., Schenk, J., Hauzenberger, F., Stockinger, J. & Wurm, J., 28 Jan 2009, IPC No. F27D 3/ 00 A I, Patent No. ZA200705780, Priority date 23 Dec 2004, Priority No. AT20040002168

    Research output: Patent

  452. Published

    processo e aparelho para produzir metais e/ou produtos metÁlicos primÁrios

    Franz, H., Johannes, S., Martin, S., Josef, S. & Johann, W., 20 Jan 2009, IPC No. F27D 3/ 00 A I, Patent No. BRPI0519403, Priority date 6 Dec 2005, Priority No. WO2005EP13042

    Research output: Patent

  453. Published

    Collection of fine particles by novel wet electrostatic precipitator

    Bologa, A., Paur, H-R., Lehner, M., Seifert, H., Wäscher, T. & Woletz, K., 2009, In: IEEE Transactions on Industry Applications. 46, p. 2170-2177

    Research output: Contribution to journal › Article › Research › peer-review

  454. Published

    FINEX - Ein Wunschtraum der Eisen- und Stahlindustrie wurde Wirklichkeit

    Schenk, J., 2009, In: Scale up. p. 8-9

    Research output: Contribution to journal › Article › Research › peer-review

  455. 2008

  456. Development and current status of the COREX® process with special focus on COREX Baosteel

    Siuka, D., Schenk, J. & Böhm, C., 1 Dec 2008, 3rd International Meeting on Ironmaking and 2nd International Symposium on Iron Ore. p. 678-686 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  457. Published

    Method for reducing a particulate material containing a metal, especially iron ore

    Konstantin, M., Johann, R., Siegfried, Z., Hanspeter, O., Johannes, S. & Leopold, W. K., 29 May 2008, IPC No. C21B 13/ 14 A I, Patent No. AU2002331402B, Priority date 28 Aug 2002, Priority No. WO2002AT00254

    Research output: Patent

  458. Published

    Method and device for producing molten material

    Robert, M., Bogdan, V., Johann, W., Norbert, R., Kurt, W., Franz, H., Johannes, S. & Martin, S., 24 Apr 2008, IPC No. C21B 13/ 14 A I, Patent No. AU2007312665, Priority date 1 Oct 2007, Priority No. WO2007EP08514

    Research output: Patent

  459. Published

    Method and device for producing molten material

    Wieder, K., Schenk, J., Bogdan, V., Martin, S., Wurm, J., Millner, R., Hauzenberger, F., Rein, N., Kurt, W., Schenk, J., Bogdan, V., Martin, S., Johann, W., Robert, M., Hauzenberger, F. & Rein, N., 24 Apr 2008, IPC No. C21B 13/ 00 A I, Patent No. AU2007312666, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  460. Published

    Fluidized-bed technology for the production of iron products for steelmaking

    Plaul, F., Böhm, C. & Schenk, J., 2008, Proceedings IFSA 2008. p. 334-346

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  461. Published

    Limiting Steps in Multistage Iron Ore Fines Reduction with H2-rich Gases in Fluidized Beds at Elevated Pressure

    Sturn, J., Weiss, B., Winter, F. & Schenk, J., 2008, Proceedings of the 9th International Conference on Circulating Fluidized Beds. p. 47-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  462. 2007
  463. Published

    Comparison of the Reduction Kinetics of Hematite with CO-rich and H2-rich gases at elevated pressure

    Sturn, J., Weiss, B., Schuster, S., Winter, F. & Schenk, J., 2007, Comparison of the Reduction Kinetics of Hematite with CO-rich and H2-rich gases at elevated pressure. p. 58-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  464. Published

    Reduction Kinetics of Coarse Hematite in Pressurized Fluidized Beds

    Weiss, B., Schuster, S., Winter, F., Mali, H. & Schenk, J., 2007, Proceeding AISTech. p. 45-52

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  465. Published

    Reduction of iron ore fines with CO-rich gases under pressurized fluidized bed conditions

    Pawlik, C., Schuster, S., Eder, N., Winter, F., Mali, H., Fischer, H. & Schenk, J. L., 2007, In: ISIJ international. 47, 2, p. 217-225

    Research output: Contribution to journal › Article › Research › peer-review

  466. 2006
  467. Published

    Verfahren und Vorrichtung zur Erzeugung von Metallen und/oder Metallvorprodukten

    Schenk, J., Schmidt, M., Hauzenberger, F., Stockinger, J. & Wurm, J., 15 Jun 2006, Patent No. A 2168/2004

    Research output: Patent

  468. Published

    Application of Fluidized Bed Technology for Reduction of Fine Iron Ore in Ironmaking Processes

    Schenk, J., 2006, Conference of 19 th FBC. p. 25-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  469. Published

    DIe Direktreduktion von Feineisenerzen in Druckwirbelschichtreaktoren: Experimentelle Untersuchungen und morphologische Betrachtung zur Übertragung auf industrielle Prozesse

    Schuster, S., Winter, F., Mali, H., Kühas, T. & Schenk, J., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 462-468

    Research output: Contribution to journal › Article › Research › peer-review

  470. Published

    From Fine Ore to Hot Metal

    Schenk, J. & Lee, H. G., 2006, Conference Proceedings of IS 06. p. 35-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  471. Published

    Iron ore reduction in a continuously operated multistage lab-scale fluidized bed reactor—Mathematical modeling and experimental results

    Thurnhofer, A., Schuster, S., Löffler, G., Habermann, A., Winter, F., Hofbauer, H., Schenk, J. & Zirngast, J., 2006, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 37.2006, August, p. 655-673 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  472. Published

    Reduction Kinetics of Coarse Hematite Iron Ore in Fluidized Bed Reactors at Elevated Pressure

    Schuster, S., Pawlik, C., Winter, F., Mali, H., Fischer, H. & Schenk, J., 2006, Conference of 19 th FBC. p. 75-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  473. Published

    Reduction of Iron Ores with CO-rich and H2-rich Gases: A Detailed Evaluation for Industrial Fluidized Bed Processes

    Schuster, S., Pawlik, C., Winter, F., Mali, H., Fischer, H. & Schenk, J., 2006, Proceedings of AISTech. p. 86-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  474. 2005
  475. Published

    Characterization of the Reduction of Iron Ore Fines with CO-rich Gases under Pressurized Fluidized Bed Conditions

    Pawlik, C., Eder, N., Thurnhofer, A., Winter, F., Mali, H., Fischer, H. & Schenk, J., 2005, Proceeding IFSA. p. 89-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  476. Published

    Iron Ore Reduction in a Laboratory-scale Fluidized Bed Reactor-Effect of Pre-reduction on Final Reduction Degree

    Thurnhofer, A., Schachinger, M., Winter, F., Mali, H. & Schenk, J., 2005, In: ISIJ international. 45, p. 151-158

    Research output: Contribution to journal › Article › Research › peer-review

  477. Published

    Modelling Iron Ore Reduction for Processes using Consecutive Fluidized Bed Reactors

    Schuster, S., Thurnhofer, A., Winter, F., Fischer, H. & Schenk, J., 2005, Proceeding IFSA. p. 65-72

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  478. 2004
  479. Published

    Meeting the New Challenge in Iron Making with COREX and FINEX Technology

    Wieder, K., Schenk, J., Böhm, C. & Aichinger, C., 2004, Conference. p. 51-57

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  480. Published

    Methods for Assessing the Properties of Fine Iron Ores for Reduction Processes

    Hauzenberger, F., Reidetschläger, J., Mali, H. & Schenk, J., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 385-392

    Research output: Contribution to journal › Article › Research › peer-review

  481. Published

    Reduction Behaviour of Hematite to Magnetite under Fluidized Bed Conditions

    Feilmayr, C., Thurnhofer, A., Winter, F., Mali, H. & Schenk, J., 2004, In: ISIJ international. 44, p. 1125-1133

    Research output: Contribution to journal › Article › Research › peer-review

  482. 2003
  483. Published

    Systeme zur Abgasreinigung bei dezentralen Rückstandsverbrennungen in der chemischen Industrie

    Lehner, M. & Hoffmann, A., 2003, In: Chemie-Ingenieur-Technik. 75, p. 823-830

    Research output: Contribution to journal › Article › Research › peer-review

  484. 2002

  485. A new method for the determination of iron ore reducibility under fluidized bed conditions

    Habermann, A., Winter, F., Hofbauer, H., Zirngast, J., Schenk, J. L. & Hiebler, M., 1 Feb 2002, In: Iron and steel maker : I & SM. 28, 2, p. 49-54 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  486. 2001
  487. Published

    Separation of dust, halogen and PCCD/F in a compact wet scrubber

    Lehner, M., Mayinger, F. & Geipel, W., 2001, In: Transactions of the Institution of Chemical Engineers / B, Process safety and environmental protection. 79, p. 109-116

    Research output: Contribution to journal › Article › Research › peer-review

  488. 2000

  489. Experimental study on the kinetics of fluidized bed iron ore reduction

    Habermann, A., Winter, F., Hofbauer, H., Zirngast, J. & Schenk, J. L., 1 Jan 2000, In: ISIJ international. 40, 10, p. 935-942 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  490. Published

    Technology for an increased portion of fine ore in the COREX process

    Schenk, J. L., Wallner, F., Kepplinger, W. L., Shin, M. K., Cho, M. Y. & Lee, I. O., 1 Jan 2000, In: Scandinavian Journal of Metallurgy. 29, 2, p. 81-91 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  491. 1999

  492. FINEX (R): a new process for production of hot metal from fine ore and coal

    Joo, S., Kim, H. G., Lee, I. O., Schenk, J., Gennari, U. & Hauzenberger, F., Aug 1999, In: Scandinavian Journal of Metallurgy. 28.1999, 4, p. 178-183 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  493. Published

    Abscheidung von PCDD/F in Füllkörperkolonnen

    Lehner, M., 1999, VDI-Bericht 1478. p. 651-654

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  494. Published

    Applied Optical Measurements: Application, Theoretical, Experimental

    Lehner, M. & Mewes, D., 1999, Berlin: Springer. (Heat and Mass Transfer)

    Research output: Book/Report › Book › Research

  495. Published

    Convective Flow and Pool Boiling: Theoretical, Experimental

    Lehner, M. & Mayinger, F., 1999, Philadelphia.

    Research output: Book/Report › Book › Research

  496. 1998

  497. Direct use of fine iron ore in the Corex® process

    Joo, S., Shin, M. K., Cho, M., Lee, S. D., Lee, J. H., Lee, I. O., Schenk, J. L., Kepplinger, W. L., Wallner, F., Gennari, U. R., Hauzenberger, F. & Nagl, M., 1 Dec 1998, In: Iron and steel maker : I & SM. 25, 7, p. 39-43 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  498. Published

    Process for the continuous conveying of a fine-grained and/or pulverized

    Johannes, S., Michael, N. & Walter, R. K., 21 Jun 1998, IPC No. F27D 3/ 18 A I, Patent No. TW334507B, Priority date 16 Oct 1996, Priority No. TW19960112626

    Research output: Patent

  499. Published

    Aerosol Separation Efficiency of a Venturi Scrubber Working in Self-Priming Mode

    Lehner, M., 1998, In: Aerosol science and technology. 28, 5, p. 389-402

    Research output: Contribution to journal › Article › Research › peer-review

  500. Published

    Betriebserfahrungen und Abscheideleistungen eines integrierten Kompaktwäschers zur Reinigung von Müllverbrennungsabgasen

    Lehner, M., Mayinger, F., Babinsky, A., Müller, F. & Geipel, W., 1998, VDI-Bericht 1387. p. 385-394

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  501. 1996
  502. Published

    A PROCESS FOR THE DIRECT REDUCTION OF PARTICULATE IRON-OXIDE- CONTAINING MATERIAL.

    Siegfried, Z., Johannes, L. S., Karl, C. & Konstantin, M., 30 Nov 1996, IPC No. C22B 13/ 02 A I, Patent No. MY108789, Priority date 22 May 1992, Priority No. AT19920001066

    Research output: Patent

  503. 1995
  504. Published

    Operating results and aerosol deposition of a venturi-scrubber in self-priming operation

    Mayinger, F. & Lehner, M., 1995, In: Chemical engineering & processing: Process intensification. 34, 3, p. 283-288

    Research output: Contribution to journal › Article › Research › peer-review

  505. 1994
  506. Published

    Integrierter Kompaktwäscher aus Füllkörperkolonne und Venturiwäscher im Selbstansaugbetrieb

    Lehner, M. & Mayinger, F., 1994, In: Chemie-Ingenieur-Technik. 66, p. 1234-1235

    Research output: Contribution to journal › Article › Research › peer-review

  507. 1993
  508. Published

    Aerosolabscheidung im Venturiwäscher mit mehrstufiger Eindüsung der Waschflüssigkeit im Selbstansaugbetrieb

    Lehner, M., Glückert, U. & Mayinger, F., 1993, In: Chemie-Ingenieur-Technik. 65, p. 1355-1357

    Research output: Contribution to journal › Article › Research › peer-review

Advanced filters

All authors

Reset

to
Reset filters