Raul Bermejo

101 - 150 out of 219Page size: 50

Research output

  1. 2015
  2. Published

    High temperature mechanical properties of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 273, p. 237-243

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Influence of temperature and humidity on the strength of Low Temperature Co-fired Ceramics

    Krautgasser, C., Danzer, R., Supancic, P. & Bermejo, R., 2015, In: Journal of the European Ceramic Society. 35, p. 1823–1830

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling

    Röhrig, S., Krautgasser, C., Bermejo, R., Jones, J. L., Supancic, P. & Deluca, M., 2015, In: Journal of the European Ceramic Society. 35, p. 4321-4325 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Strength of an Electrolyte Supported Solid Oxide Fuel Cell

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kuebler, J., 2015, In: Journal of power sources. 297, p. 158-167 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Thermography and Complemetary Measurements as Tool to Detect Micro-Irregularities in Electronic Components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 2015, In: Journal of ceramic science and technology. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Towards mussels under stress: novel concepts to design tough and reliable advanced ceramics: novel concepts to design tough and reliable advanced ceramics

    Bermejo, R., 2015

    Research output: Thesis › Habilitation thesis › peer-review

  9. Published

    Understanding the edge crack phenomenon in ceramic laminates

    Sevecek, O., Kotoul, M., Leguillon, D. P., Martin, E. & Bermejo, R., 2015, In: Frattura ed integrità strutturale. 34, 10, p. 408-416 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2014
  11. E-pub ahead of print

    Effect of aging on the onset of cracks due to redistribution of residual stresses in functionally graded environmental barrier coatings of mullite/ZrO2

    Mesquita-Guimarães, J., Garcia, E., Osendi, M. I., Sevecek, O. & Bermejo, R., 29 Jan 2014, (E-pub ahead of print) In: Composites / B. 61.2014, May, p. 199-205 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Evaluation of subcritical crack growth in low temperature co-fired ceramics

    Bermejo, R., Supancic, P., Krautgasser, C. & Danzer, R., 10 Jan 2014, Mechanical Properties and Performance of Engineering Ceramics and Composites VIII - A Collection of Papers Presented at the 37th International Conf. on Advanced Ceramics and Composites, ICACC 2013. 2 ed. Vol. 34. p. 161-172 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Analysis on the mechanical strength of WC-Co cemented carbides under uniaxial and biaxial bending

    Torres, Y., Bermejo Moratinos, R., Gotor, F. J., Chicardi, E. & Llanes, L., 2014, In: Materials and Design. 55, p. 851-856

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Determination of strength and fracture toughness of small ceramic discs using the small punch test and the ball-on-three-balls test

    Rasche, S., Strobl, S., Kuna, M., Bermejo Moratinos, R. & Lube, T., 2014, In: Procedia Materials Science. p. 961-966

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Effect of residuel stresses on the strength of glass-ceramic multilayer composites different microstructures

    Bermejo Moratinos, R., Krautgasser, C., Deluca, M., Strobl, S., Kraleva, I., Petschenig, I., Aldrian, F., Supancic, P. & Danzer, R., 2014, Praktische Metallographie Sonderband. p. 169-174

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Improved Fracture Behavior of Alumina Microstructural Composites with Highly Textured Compressive Layers

    Chang, Y., Bermejo Moratinos, R. & Messing, G. L., 2014, In: Journal of the American Ceramic Society. 97, p. 3643-3651

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Influence of the T-stress on the crack bifurcation phenomenon in ceramic laminates

    Sevecek, O., Bermejo Moratinos, R., Profant, T. & Kotoul, M., 2014, In: Procedia Materials Science. 3, p. 1062-1067

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Mechanical Characterization of Ceramics: Designing with Brittle Materials

    Bermejo Moratinos, R. & Danzer, R., 2014, Comprehensive Hard Materials. p. 285-298

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  20. Published

    Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites

    Majer, Z., Pletz, M., Krautgasser, C., Nalik, L., Hutar, P. & Bermejo Moratinos, R., 2014, In: Procedia Materials Science. 3, p. 2071-2076

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    On the determination of the stress-free temperature for alumina-zirconia multilayer structures

    Chlup, Z., Hadraba, H., Drdlik, D., Maca, K., Dlouhy, I. & Bermejo, R., 2014, In: Ceramics International : CI. 40.2014, 4, p. 5787-5893 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Processing and characterisation of cermet/hardmetal laminates with strong interfaces

    Gotor, F. J., Bermejo Moratinos, R., Cordoba, J. M., Chicardi, E., Medri, V., Dalle Fabbriche, D. & Torres, Y., 2014, In: Materials and Design. 58, p. 226-233

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

    Macurova, K., Angerer, P., Antretter, T., Bermejo Moratinos, R., Maia, W., Schöngrundner, R., Krivec, T., Morianz, M. & Brizoux, M., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2013
  25. Published

    Layered Ceramics

    Bermejo, R. & Deluca, M., 1 May 2013, Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties: Second Edition. Amsterdam: Elsevier, p. 733-751 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Crack path prediction in layered ceramics designed with residual stresses

    Bermejo Moratinos, R., 2013, Proceedings of the 4th International Conference on Crack Paths. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Fracture Behaviour of Layered Alumina Microstructural Composites with Highly Textured Layers

    Pavlacka, R., Bermejo Moratinos, R., Chang, Y., Green, D. J. & Messing, G. L., 2013, In: Journal of the American Ceramic Society. 96, p. 1577-1585

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Influence of the residual stresses on the crack deflection in ceramic laminates

    Sevecek, O., Kotoul, M., Profant, T. & Bermejo, R., 2013, 13th International Conference on Fracture 2013, ICF 2013. Vol. 2. p. 881-890 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Mechanical Properties of Low-Temperature Co-Fired Ceramics Fired at Different Temperatures

    Makarovic, K., Bermejo Moratinos, R., Kraleva, I., Holc, J., Hrovat, M., Bencan, A., zarnik, M. S., Belavic, D. & Kosec, M., 2013, Proceedings of the 48th International Conference on Microelectronics, Devices and Materials. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Prediction of the crack bifurcation in layered ceramics with high residual stresses

    Sevecek, O., Bermejo Moratinos, R. & Kotoul, M., 2013, In: Engineering Fracture Mechanics. 108, p. 120-138

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2013, Mechanical properties and performance of engineering ceramics and composites. Vol. VII. p. 163-174 (Ceramic engineering and science proceedings ; vol. 33, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

    Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, In: Engineering Fracture Mechanics. 100, p. 108-121

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2012
  35. Published

    Mechanical properties of low temperature co-fired ceramics: Testing methodologies for strength characterization

    Bermejo, R., Dec 2012, In: Informacije MIDEM. 42, 4, p. 254-259 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Effect of combined thermo-mechanical loading on the domain texture and the fracture resistance of lead zirconate titanate (PZT) ceramics

    Deluca, M., Krautgasser, C., Bermejo Moratinos, R., Foronda, H., Jones, J. & Supancic, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Experimental approach to assess the effect of metallization on the strength of functional ceramic components

    Bermejo Moratinos, R., Supancic, P., Aldrian, F. & Danzer, R., 2012, In: Scripta materialia. 66, p. 546-549

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Influence of measurement uncertainties on the determination of the Weibull modulus

    Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 251-255

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Layered ceramics with internal compressive stresses to improve strength and toughness

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Mechanical Characterization of PZT Ceramics for Multilayer Piezoelectric Actuators

    Bermejo Moratinos, R. & Deluca, M., 2012, In: Journal of ceramic science and technology. 3, p. 159-168

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Mechanical Properties of LTCC: Testing Methodologies for Strength Characterization

    Bermejo Moratinos, R., 2012, Proceedings of the 48th International Conference on Microelectronics, Devices and Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Ni–NiO composites obtained by controlled oxidation of green compacts

    Cabanas-Polo, S., Bermejo Moratinos, R., Ferrari, B. & Sanchez-Herencia, J., 2012, In: Corrosion science. 55, p. 172-179

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Seveck, O. & Danzer, R., 2012, International Conference on Advanced Ceramics and Composites. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Study of crack growth in multilayered ceramic/ceramic materials with strong interfaces

    Kotoul, M., Sevecek, O., Vyslouzil, T. & Bermejo, R., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    The effect of the phase composition on the mechanical properties of LTCC material

    Makarovic, K., Bermejo Moratinos, R., Kraleva, I., Bencan, A., Hrovat, M., Holc, J., Malic, B. & Kosec, M., 2012, In: International journal of applied ceramic technology. 10, p. 449-457

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    ZACCARINIITE, RhNiAs, A NEW PLATINUM-GROUP MINERAL FROM LOMA PEGUERA, DOMINICAN REPUBLIC

    Vymazalová, A., Laufek, F., Drabek, M., Stanley, C., Baker, R., Bermejo Moratinos, R., Garuti, G., Thalhammer, O., Proenza, J. & Longo, F., 2012, In: The Canadian Mineralogist. 50, p. 1321-1329

    Research output: Contribution to journal › Article › Research › peer-review

  48. 2011
  49. Published

    Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die Festigkeit

    Bermejo Moratinos, R., Sestakova, L., Kraleva, I., Supancic, P. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Evaluation of the Strength of Low Temperature Co-fired Ceramics under Biaxial Stress

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Krautgasser, C., Aldrian, F., Morrell, R. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, Key engineering materials. Vol. 465. p. 41-46 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  52. Published

    Fracture resistance of a doped PZT for multilayer actuators: Effect of mechanical load and temperature

    Bermejo Moratinos, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Influence of the Load Dependent Material Properties on the Performance of Multilayer Piezoelectric Actuators

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Krautgasser, C. & Supancic, P., 2011, IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials. p. 243-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Numerical investigation of the process of embedding components into printed circuit boards

    Pletz, M., Bermejo, R., Supancic, P., Stahr, J. & Morianz, M., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765814

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 Next
View graph of relations

Contact

Phone: 4100

Latest Research Output

View more (219)