Helmut Clemens

(Former)

Research output

  1. 2024
  2. Published

    Materials science-based guidelines to develop robust hard thin film materials

    Mayrhofer, P. H., Clemens, H. & Fischer, F.-D., 3 Jun 2024, In: Progress in materials science. 146.2024, December, 57 p., 101323.

    Research output: Contribution to journalReview articlepeer-review

  3. 2023
  4. Published

    Emissivity measurements conducted on intermetallic γ-TiAl-based alloys for aeronautical applications

    Usategui, L., López-Ferreno, I., Echániz, T., Sainz-Menchón, M., Musi, M., Clemens, H. & López, G. A., 1 Nov 2023, In: Journal of Materials Research and Technology. 27.2023, November-December, p. 3170-3179 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  5. E-pub ahead of print

    High-temperature microstructure evolution of an advanced intermetallic nano-lamellar γ-TiAl-based alloy and associated diffusion processes

    Nó, M. L., Klein, T., Clemens, H. & San Juan, J. M., 4 Oct 2023, (E-pub ahead of print) In: Acta materialia. 261.2023, 1 December, 13 p., 119380.

    Research output: Contribution to journalArticleResearchpeer-review

  6. E-pub ahead of print

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, (E-pub ahead of print) In: Journal of alloys and compounds. 2023, 969, 7 p., 172400.

    Research output: Contribution to journalArticleResearchpeer-review

  7. E-pub ahead of print

    Alloying elements in intermetallic γ-TiAl based alloys – A review on their influence on phase equilibria and phase transformations

    Musi, M., Graf, G., Clemens, H. & Spörk-Erdely, P., 9 Jul 2023, (E-pub ahead of print) In: Advanced engineering materials. 26.2024, 4, 26 p., 2300610.

    Research output: Contribution to journalReview articlepeer-review

  8. E-pub ahead of print

    Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

    Graf, G., Spörk-Erdely, P., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Klein, T., 30 Jun 2023, (E-pub ahead of print) In: Journal of magnesium and alloys. 2023, 11, p. 1944-1958 15 p.

    Research output: Contribution to journalArticleResearchpeer-review

  9. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 2023, 161, 9 p., 107962.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Glide and mixed climb dislocation velocity in γ-TiAl investigated by in-situ transmission electron microscopy

    Galy, B., Musi, M., Hantcherli, M., Molénat, G., Couret, A., Spörk-Erdely, P., Clemens, H. & Monchoux, J.-P., 15 Apr 2023, In: Scripta materialia. 228.2023, 15 April, 8 p., 115333.

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    Phase stability of TiAl-based BCC high entropy alloys

    Hatzenbichler, L., Zeisl, S., Clemens, H. & Holec, D., 7 Apr 2023, In: Intermetallics. 158.2023, July, 9 p., 107893.

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    A TEM study of a dislocations in the ßo phase of an intermetallic TNM-TiAl alloy

    Molénat, G., Monchoux, J.-P., Musi, M., Spörk-Erdely, P., Clemens, H. & Couret, A., 15 Mar 2023, In: Scripta materialia. 226.2023, 15 March, 6 p., 115247.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    Influence of focus offset on the microstructure of an intermetallic γ-TiAl based alloy produced by electron beam powder bed fusion

    Ghibaudo, C., Wartbichler, R., Marchese, G., Clemens, H., Ugues, D. & Biamino, S., 3 Mar 2023, In: Journal of manufacturing processes. 89.2023, 3 March, p. 132-141 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Mar 2023, In: International journal of refractory metals & hard materials. 113.2023, June, 4 p., 106173.

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Evolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formats

    Jakob, S., Lorich, A., Knabl, W., Stark, A., Staron, P., Clemens, H. & Spörk-Erdely, P., Jan 2023, In: International journal of refractory metals & hard materials. 110.2023, January, 7 p., 106032.

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    A comprehensive study on the metallographic preparation of W-Re samples for high resolution electron-based microscopy

    Sommerauer, M., Clemens, H., Maier-Kiener, V. & Siller, M., 2023, Pract. Metallograp.. Vol. 60. p. 171-186

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  18. Published

    Ballistic tests on hot-rolled Ti-6Al-4V plates: Experiments and numerical approaches

    Janda, A., Ralph, B., Demarty, Y., Sorger, M., Ebenbauer, S., Prestl, A., Siller, I., Stockinger, M. & Clemens, H., 2023, In: Defence Technology. 26.2023, August, p. 39-53 15 p.

    Research output: Contribution to journalArticleResearchpeer-review

  19. 2022
  20. Published
  21. E-pub ahead of print

    On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder

    Musi, M., Clemens, H., Stark, A. & Spörk-Erdely, P., 26 Nov 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 6, 6 p., 2201242.

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published
  23. Published

    Microstructure, Plasticity and Ductility of a TNM+ Alloy Densified by Spark Plasma Sintering

    Musi, M., Deshayes, C., Molénat, G., Toualbi, L., Galy, B., Spörk-Erdely, P., Hantcherli, M., Monchoux, J.-P., Thomas, M., Clemens, H. & Couret, A., 8 Nov 2022, In: Metals : open access journal . 12.2022, 11, 22 p., 1915.

    Research output: Contribution to journalArticleResearchpeer-review

  24. E-pub ahead of print

    The effect of zirconium on the Ti-(42-46 at.%)Al system

    Musi, M., Kardos, S., Hatzenbichler, L., Holec, D., Stark, A., Allen, M., Güther, V., Clemens, H. & Spörk-Erdely, P., 2 Oct 2022, (E-pub ahead of print) In: Acta materialia. 241.2022, December, 13 p., 118414.

    Research output: Contribution to journalArticleResearchpeer-review

  25. E-pub ahead of print

    Plasticity and brittleness of the ordered βo phase in a TNM-TiAl alloy

    Molénat, G., Galy, B., Musi, M., Toualbi, L., Thomas, M., Clemens, H., Monchoux, J.-P. & Couret, A., 6 Sept 2022, (E-pub ahead of print) In: Intermetallics. 151.2022, December, 11 p., 107653.

    Research output: Contribution to journalArticleResearchpeer-review

  26. E-pub ahead of print

    In-situ high-temperature EBSD characterization during a solution heat treatment of hot-rolled Ti-6Al-4V

    Janda, A., Ebenbauer, S., Prestl, A., Siller, I., Clemens, H. & Spörk-Erdely, P., 8 Aug 2022, (E-pub ahead of print) In: Materials characterization. 192.2022, October, 12 p., 112207.

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    How Si affects the microstructural evolution and phase transformations of intermetallic 𝛾-TiAl based alloys

    Musi, M., Galy, B., Stark, A., Schell, N., Hantcherli, M., Monchoux, J.-P., Couret, A., Clemens, H. & Spörk-Erdely, P., 12 Jun 2022, In: Materialia. 24.2022, August, 11 p., 101475.

    Research output: Contribution to journalArticleResearchpeer-review

  28. E-pub ahead of print

    Revealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA III

    Krohmer, E., Schmeiser, F., Wahlmann, B., Rosigkeit, J., Graf, G., Spörk-Erdely, P., Clemens, H., Staron, P., Körner, C., Reimers, W. & Uhlmann, E., 10 Jun 2022, (E-pub ahead of print) In: Review of scientific instruments. 93.2022, 6, 14 p., 065104.

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Microstructure Evolution of a New Precipitation-Strengthened Fe–Al–Ni–Ti Alloy down to Atomic Scale

    Godor, F. R., Palm, M., Liebscher, C., Stein, F., Turk, C., Leitner, K., Rashkova, B. & Clemens, H., 26 May 2022, In: Metals : open access journal . 12.2022, 6, 16 p., 906.

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    Quench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: An in situ SAXS and HEXRD study

    Graf, G., Spörk-Erdely, P., Staron, P., Stark, A., Mendez Martin, F., Clemens, H. & Klein, T., 1 Apr 2022, In: Acta materialia. 227.2022, 1 April, 12 p., 117727.

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Phase transformations and phase stability in the Ti–44 at.%Al–(0–7 at.%) Mo system

    Musi, M., Clemens, H., Stark, A., Staron, P. & Spörk-Erdely, P., Apr 2022, In: Intermetallics. 143.2022, April, 9 p., 107484.

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    On the existence of orthorhombic martensite in a near-α titanium base alloy used for additive manufacturing

    Fleißner-Rieger, C., Tunes, M. A., Gammer, C., Jörg, T., Pfeifer, T., Musi, M., Mendez Martin, F. & Clemens, H., 15 Mar 2022, In: Journal of alloys and compounds. 897.2022, 15 March, 10 p., 163155.

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Formation and evolution of precipitates in an additively manufactured near-α titanium base alloy

    Fleißner-Rieger, C., Schönmaier, H., Musi, M., Stadler, M., Gschiel, H., Turk, C., Pfeifer, T. & Clemens, H., Mar 2022, In: Materialia. 21.2022, March, 6 p., 101366.

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published

    Optimization of the post-process heat treatment strategy for a Near-α Titanium base alloy produced by laser powder bed fusion

    Fleißner-Rieger, C., Pfeifer, T., Turk, C. & Clemens, H., 28 Jan 2022, In: Materials. 15.2022, 3, p. 1-14 14 p., 1032.

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published

    In-situ observation of the phase evolution during an electromagnetic-assisted sintering experiment of an intermetallic γ -TiAl based alloy

    Musi, M., Galy, B., Monchoux, J.-P., Couret, A., Clemens, H. & Mayer, S., 1 Jan 2022, In: Scripta materialia. 206.2022, 1 January, 4 p., 114233.

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published
  37. Published

    Microstructural adjustment of hot-rolled Ti–6Al–4V based on a CCT diagram

    Janda, A., Ebenbauer, S., Prestl, A., Siller, I. & Clemens, H., 2022, In: Materials science and technology. 38.2022, 13, p. 957-964 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published
  39. Published

    Study of the phase transformation behavior of a γ-TiAl based alloy during an adapted spark plasma sintering process

    Musi, M., Galy, B., Monchoux, J.-P., Couret, A., Clemens, H. & Spörk-Erdely, P., 2022.

    Research output: Contribution to conferencePosterResearch

  40. 2021
  41. Published

    How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted y-TiAl based alloy

    Wimler, D., Käsznar, K., Musi, M., Breuning, C., Markl, M., Keckes, J., Clemens, H., Körner, C. & Mayer, S., 15 Dec 2021, In: Materials and Design. 212.2021, 15 December, 13 p., 110187.

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published

    Effects of tungsten alloying and fluorination on the oxidation behavior of intermetallic titanium aluminides for aerospace applications

    Donchev, A., Mengis, L., Couret, A., Mayer, S., Clemens, H. & Galetz, M., Dec 2021, In: Intermetallics. 139.2021, December, 14 p., 107270.

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Grain boundary segregation in Ni-base alloys: A combined atom probe tomography and first principles study

    Ebner, A., Jakob, S., Clemens, H., Pippan, R., Maier-Kiener, V., He, S., Ecker, W., Scheiber, D. & Razumovskiy, V. I., Dec 2021, In: Acta materialia. 221.2021, December, 10 p., 117354.

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action

    Wartbichler, R., Clemens, H., Mayer, S., Ghibaudo, C., Rizza, G., Galati, M., Iuliano, L., Biamino, S. & Ugues, D., Dec 2021, In: Advanced engineering materials. 23.2021, 12, 22 p., 2101199.

    Research output: Contribution to journalArticleResearchpeer-review

  45. Published

    Microstructure evolution induced by the intrinsic heat treatment occurring during wire-arc additive manufacturing of an Al-Mg-Zn-Cu crossover alloy

    Klein, T., Graf, G., Staron, P., Stark, A., Clemens, H. & Spörk-Erdely, P., 15 Nov 2021, In: Materials letters. 303.2021, 15 November, 4 p., 130500.

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Rate-depending plastic deformation behaviour in a nickel-base alloy under hydrogen influence

    Ebner, A., Plesiutschnig, E., Clemens, H., Pippan, R. & Maier-Kiener, V., 3 Nov 2021, In: International Journal of Hydrogen Energy . 46.2021, 76, p. 38132-38143 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    Microstructure and mechanical properties of novel TiAl alloys tailored via phase and precipitate morphology

    Wimler, D., Lindemann, J., Kremmer, T., Clemens, H. & Mayer, S., Nov 2021, In: Intermetallics. 138.2021, November, 10 p., 107316.

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    On the evolution of banded microstructures in an electron beam melted Ti-48Al-2Cr-2Nb alloy

    Wartbichler, R., Clemens, H., Mayer, S., Ghibaudo, C., Rizza, G., Galati, M., Iuliano, L., Biamino, S. & Ugues, D., 5 Oct 2021.

    Research output: Contribution to conferencePosterResearch

  49. Published

    Electrons meet alloy development: A γ-TiAl-based alloy showcase

    Holec, D., Abdoshahi, N., Gehringer, D., Hatzenbichler, L., Sakic, A. & Clemens, H., 18 Sept 2021, In: Advanced engineering materials. 24.2022, 14 p., 2100977.

    Research output: Contribution to journalArticleResearchpeer-review

  50. Published

    An atomistic view on Oxygen, antisites and vacancies in the γ-TiAl phase

    Razumovskiy, V. I., Ecker, W., Wimler, D., Fischer, F.-D., Appel, F., Mayer, S. & Clemens, H., Sept 2021, In: Computational materials science. 197.2021, September, 8 p., 110655.

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published

    Influence of Nb on Ti diffusion in γ-TiAl intermetallics studied by mechanical spectroscopy

    Ibanez-Perez, J., No, M. L., Oehring, M., Clemens, H. & San Juan, J. M., 25 Jun 2021, In: Journal of alloys and compounds. 867.2021, June, 8 p., 158880.

    Research output: Contribution to journalArticleResearchpeer-review

  52. E-pub ahead of print

    In Situ Investigation of the Rapid Solidification Behavior of Intermetallic γ-TiAl-Based Alloys Using High-Energy X-Ray Diffraction

    Graf, G., Rosigkeit, J., Krohmer, E., Staron, P., Krenn, R., Clemens, H. & Spörk-Erdely, P., 23 Jun 2021, (E-pub ahead of print) In: Advanced engineering materials. 23.2021, 11, 7 p., 2100557 .

    Research output: Contribution to journalArticleResearchpeer-review

  53. Published
  54. Published

    Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 24 May 2021, In: Materials and Design. 207.2021, September, 8 p., 109848.

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published

    High temperature nanoindentation as a tool to investigate plasticity upon phase transformations demonstrated on Cobalt

    Kappacher, J., Tkadletz, M., Clemens, H. & Maier-Kiener, V., May 2021, In: Materialia. 16.2021, May, 9 p., 101084.

    Research output: Contribution to journalArticleResearchpeer-review

  56. Published

    Designing advanced intermetallic titanium aluminide alloys for additive manufacturing

    Wimler, D., Lindemann, J., Reith, M., Kirchner, A., Allen, M., Vargas, W. G., Franke, M., Klöden, B., Weißgärber, T., Güther, V., Schloffer, M., Clemens, H. & Mayer, S., Apr 2021, In: Intermetallics. 131.2021, April, p. 1-10 10 p., 107109.

    Research output: Contribution to journalArticleResearchpeer-review

  57. Published

    Geometrical model for calculating the effect of surface morphology on total x-ray output of medical x-ray tubes

    Siller, M., Minkkinen, M., Bogust, P., Jelinek, A., Schatte, J., Bostrom, N., Greenland, K., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., Apr 2021, In: Medical physics. 48.2021, 4, p. 1546-1556 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  58. Published

    Thermal Expansion of a Multiphase Intermetallic Ti-Al-Nb-Mo Alloy Studied by High-Energy X-ray Diffraction

    Staron, P., Stark, A., Schell, N., Spörk-Erdely, P. & Clemens, H., 4 Feb 2021, In: Materials. 14.2021, 4, p. 1-13 13 p., 727.

    Research output: Contribution to journalArticleResearchpeer-review

  59. Published
  60. Published

    Controlling the high temperature deformation behavior and thermal stability of ultra-fine-grained W by re alloying

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 25 Jan 2021, In: Journal of Materials Research. 2021, 12, p. 2408-2419 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  61. E-pub ahead of print

    Laser powder bed fusion of an engineering intermetallic TiAl alloy

    Schimbäck, D., Braun, J., Leichtfried, G., Clemens, H. & Mayer, S., 22 Jan 2021, (E-pub ahead of print) In: Materials and Design. 201.2021, March, 11 p., 109506.

    Research output: Contribution to journalArticleResearchpeer-review

  62. Published
  63. Published

    An additively manufactured titanium alloy in the focus of metallography

    Fleißner-Rieger, C., Pogrielz, T., Obersteiner, D., Pfeifer, T., Clemens, H. & Mayer, S., 2021, In: Practical metallography = Praktische Metallographie. 58, 1, p. 4-31 28 p.

    Research output: Contribution to journalArticleResearchpeer-review

  64. Published

    How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 2021, In: Acta materialia. 2021, 216, 11 p., 117110.

    Research output: Contribution to journalArticleResearchpeer-review

  65. Published

    In situ observation of the phase evolution during a physical simulation of the spark plasma sintering process of a γ-TiAl based alloy

    Musi, M., Galy, B., Monchoux, J.-P., Couret, A., Clemens, H. & Mayer, S., 2021.

    Research output: Contribution to conferencePosterResearch

  66. Published

    Phase constitution in an intermetallic Ti-37Al-10Nb alloy: what we can learn about the phase equilibria

    Rashkova, B., Brabetz, M., Mendez Martin, F., Distl, B., Hauschildt, K., Stein, F. & Clemens, H., 2021.

    Research output: Contribution to conferencePosterResearch

  67. Published
  68. 2020
  69. Published

    Exploring structural changes, manufacturing, joining, and repair of intermetallic γ-TiAl-based alloys: Recent progress enabled by in situ synchrotron X-Ray techniques

    Spörk-Erdely, P., Staron, P., Liu, J., Kashaev, N., Stark, A., Hauschildt, K., Maawad, E., Mayer, S. & Clemens, H., 19 Dec 2020, In: Advanced engineering materials. 23.2020, 11, 32 p., 2000947.

    Research output: Contribution to journalArticleResearchpeer-review

  70. Published

    Selective Laser Melting of a Near-alpha Ti6242S Alloy for High-Performance Automotive Parts

    Fleißner-Rieger, C., Pfeifer, T., Jörg, T., Kremmer, T., Brabetz, M., Clemens, H. & Mayer, S., 17 Dec 2020, In: Advanced engineering materials. 2021, p. 1-12 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  71. Published

    In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy

    Burtscher, M., Alfreider, M., Schmuck, K., Clemens, H., Mayer, S. & Kiener, D., 11 Nov 2020, In: Journal of Materials Research. 2021, 12, p. 2465-2478 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  72. Published

    High-temperature phenomena in an advanced intermetallic nano-lamellar γ-TiAl-based alloy. Part I: Internal friction and atomic relaxation processes

    Usategui, L., Klein, T., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., Nov 2020, In: Acta materialia. 200, 200, p. 442-454 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  73. Published

    Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation

    Siller, M., Schatte, J., Gerzoskovitz, S., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., Nov 2020, In: International journal of refractory metals & hard materials. 92.2020, November, 11 p., 105285.

    Research output: Contribution to journalArticleResearchpeer-review

  74. Published

    An Advanced TiAl Alloy for High-Performance Racing Applications

    Burtscher, M., Klein, T., Lindemann, J., Lehmann, O., Fellmann, H., Güther, V., Clemens, H. & Mayer, S., 22 Oct 2020, In: Materials. 13.2020, 21, p. 1-14 14 p., 4720.

    Research output: Contribution to journalArticleResearchpeer-review

  75. Published

    The Development and Characterization of High-Performance Materials: A Retrospective Article

    Clemens, H., Sept 2020, In: Practical metallography = Praktische Metallographie. 57.2020, 9, p. 614-649 36 p.

    Research output: Contribution to journalArticleResearchpeer-review

  76. Published

    Novel intermetallic-reinforced near-α Ti alloys manufactured by spark plasma sintering

    Wimler, D., Lindemann, J., Gammer, C., Spörk-Erdely, P., Stark, A., Clemens, H. & Mayer, S., 5 Aug 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 792.2020, 5 August, 11 p., 139798.

    Research output: Contribution to journalArticleResearchpeer-review

  77. Published
  78. Published

    A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy

    Ebner, A. S., Brinckmann, S., Plesiutschnig, E., Clemens, H., Pippan, R. & Maier-Kiener, V., 16 Mar 2020, In: JOM. 72.2020, 5, p. 2020-2029 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  79. E-pub ahead of print

    Heat Treatments and Critical Quenching Rates in Additively Manufactured Al–Si–Mg Alloys

    Hitzler, L., Hafenstein, S., Mendez Martin, F., Clemens, H., Sert, E., Öchsner, A., Merkel, M. & Werner, E., 5 Feb 2020, (E-pub ahead of print) In: Materials. 13.2020, 3, 17 p., 720.

    Research output: Contribution to journalArticleResearchpeer-review

  80. Published
  81. 2019
  82. Published

    Microstructural characterization of molybdenum grain boundaries by micropillar compression testing and atom probe tomography

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 5 Dec 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 12, p. 776-786 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  83. Published

    Electron beam melting of a β-solidifying intermetallic titanium aluminide alloy

    Wartbichler, R., Clemens, H. & Mayer, S., 1 Dec 2019, In: Advanced engineering materials. 21.2019, 12, 5 p., 1900800.

    Research output: Contribution to journalArticleResearchpeer-review

  84. Published

    The creep behavior of a fully lamellar γ-TiAl based alloy

    Burtscher, M., Klein, T., Mayer, S., Clemens, H. & Fischer, F. D., 1 Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106611.

    Research output: Contribution to journalArticleResearchpeer-review

  85. Published
  86. Published

    Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum

    Jakob, S., Leitner, A., Lorich, A., Eidenberger-Schober, M., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Jul 2019, In: Materials & design. 182.2019, 15 November, p. 1-9 9 p., 107998.

    Research output: Contribution to journalArticleResearchpeer-review

  87. Published

    Microstructural Evolution and Mechanical Properties of an Advanced γ-TiAl Based Alloy Processed by Spark Plasma Sintering

    Wimler, D., Lindemann, J., Clemens, H. & Mayer, S., 9 May 2019, In: Materials. 12.2019, 9, 12 p., 1523.

    Research output: Contribution to journalArticleResearchpeer-review

  88. Published

    Thermal Expansion and Other Thermodynamic Properties of α2-Ti3Al and γ-TiAl Intermetallic Phases from First Principles Methods

    Holec, D., Abdoshahi, N., Mayer, S. & Clemens, H., 19 Apr 2019, In: Materials. 12.2019, 8, 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  89. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  90. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  91. Published

    In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution

    Erdely, P., Staron, P., Stark, A., Klein, T., Clemens, H. & Mayer, S., Feb 2019, In: Acta materialia. 164.2019, February, p. 110-121 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  92. Published
  93. Published

    Evidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy

    Musi, M., Erdely, P., Rashkova, B., Clemens, H., Stark, A., Staron, P., Schell, N. & Mayer, S., Jan 2019, In: Materials characterization. 147.2019, January, p. 398-405 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  94. Published
  95. Published

    Beryllium – A challenge for preparation and mechanical characterization

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 10, p. 624-633 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  96. Published

    Exploring the mechanical character of molybdenum grain boundaries via nanoindentation and three-point-bending

    Jakob, S., Leitner, A., Hohenwarter, A., Lorich, A., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., 2019.

    Research output: Contribution to conferencePosterResearch

  97. Published

    Formation of an orthorhombic transition phase in a Ti-Al-3Mo alloy: in situ synchrotron diffraction and TEM studies

    Rashkova, B., Musi, M., Erdely, P., Stark, A., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2019.

    Research output: Contribution to conferencePosterResearch

  98. Published

    High-Resolution characterization of intermetallic TiAI-Powder for additive Manufacturing

    Wimler, D., Gammer, C., Eckert, J., Mendez Martin, F., Lindemann, J., Clemens, H. & Mayer, S., 2019, Euro PM2019 - Powders for AM - Powder Production. p. 1-5

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  99. Published

    Materialographie intermetallischer Titanaluminide - die (additive) Fertigung macht den Unterschied

    Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 21-30

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  100. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 210 - 214 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  101. Published

    Mikrostruktur- und Phasenanalyse einer additiv gefertigten intermetallischen TiAl Legierung mittels metallographischer Methoden und hochenergetischer Röntgenstrahlung

    Jop, M., Wartbichler, R., Staron, P., Maawad, E., Mayer, S. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 155-162

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  102. Published
  103. 2018
  104. E-pub ahead of print

    Metallurgical processing of titanium aluminides on industrial scale

    Güther, V., Allen, M., Klose, J. & Clemens, H., 26 Sept 2018, (E-pub ahead of print) In: Intermetallics. 103.2018, December, p. 12-22 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  105. Published

    Die Grenzen der Austenitrückkonstruktion eines mehrphasigen Stahles in unterschiedlichen Gefügemodifikationen

    Weißensteiner, I., Thomas, H., Clemens, H. & Maier-Kiener, V., 19 Sept 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 301-306 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  106. E-pub ahead of print

    Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 27 Jul 2018, (E-pub ahead of print) In: Acta materialia. 158.2018, 1 October, p. 193-205 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  107. Published

    Grain boundary segregation engineering in as-sintered molybdenum for improved ductility

    Leitner, K., Lutz, D., Knabl, W., Eidenberger-Schober, M., Huber, K., Lorich, A., Clemens, H. & Maier-Kiener, V., 20 Jul 2018, In: Scripta materialia. 156.2018, November, p. 60-63 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  108. Published

    High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 10 Jul 2018, In: Materials characterization. 144.2018, October, p. 182-190 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  109. Published

    Effect of Morphological Differences on the Cold Formability of an Isothermally Heat-Treated Advanced High-Strength Steel

    Weißensteiner, I., Suppan, C., Hebesberger, T., Winkelhofer, F., Clemens, H. & Maier-Kiener, V., 10 Apr 2018, In: JOM. 70.2018, 8, p. 1567-1575 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  110. E-pub ahead of print

    Intermetallics: Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance

    Kastenhuber, M., Klein, T., Clemens, H. & Mayer, S., 2 Apr 2018, (E-pub ahead of print) In: Intermetallics. 97.2018, June, p. 27-33 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  111. E-pub ahead of print

    Pathways of phase transformation in β-phase-stabilized σ/γ-TiAl alloys subjected to two-step heat treatments

    Klein, T., Holec, D., Clemens, H. & Mayer, S., 9 Mar 2018, (E-pub ahead of print) In: Scripta materialia. 149.2018, May, p. 70-74 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  112. E-pub ahead of print

    Pulvermetallurgische Herstellung von innovativen Hochtemperaturwerkstoffen

    Clemens, H., Mayer, S. & Heilmaier, M., 5 Feb 2018, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 5, p. 270-276 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  113. Published

    How grain boundary chemistry controls the fracture mode of molybdenum

    Leitner, K., Scheiber, D., Jakob, S., Primig, S., Clemens, H., Povoden-Karadeniz, E. & Romaner, L., 9 Jan 2018, In: Materials and Design. 142.2018, 15 March, p. 36-43 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  114. Published

    Advanced Titanium Aluminides - How to Improve the Creep Resistance via Compsitional and Microstructural Optimization

    Mayer, S., Kastenhuber, M. & Clemens, H., 2018, Materials Science Forum. Vol. 941.2018. p. 1484-1489 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  115. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journalArticleResearchpeer-review

  116. Published

    Aspekte der Pulvercharakterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 219-228

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  117. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 327-332

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  118. Published

    Beryllium - Eine Herausforderung für Präparation und mechanische Charakterisierung

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 183-188

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  119. Published

    Characterization of anisotropic pores and spatially oriented precipitates in sintered Mo-base alloys using small-angle neutron scattering

    Karge, L., Lang, D., Schatte, J., Gilles, R., Busch, S., Leibenguth, P., Clemens, H. & Petry, W., 2018, In: Journal of applied crystallography. 51.2018, p. 1706-1714 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  120. Published

    Deformation behaviour of γ-TiAl based sheets studied by means of in situ synchrotron X-ray diffraction

    Erdely, P., Maawad, E., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conferencePosterResearch

  121. Published
  122. Published
  123. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, In: International journal of refractory metals & hard materials. 73.2018, June, p. 199-203 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  124. Published
  125. Published

    Kombination von Nanoindentation und Mikroskopie zur Untersuchung von Aluminium-Legierungen im grob- und ultrafeinkörnigen Zustand

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 177-182

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  126. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  127. Published
  128. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 151-156

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  129. Published

    Mikrostrukturelle Charakterisierung von Molybdän- Korngrenzen mittels Mikrosäulen-Druckversuchen und Atomsondenuntersuchungen

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 171-176

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  130. Published
  131. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  132. Published

    Strain-induced martensitic transformation in a Co-Cr-W-Mo alloy probed by nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2018, Proceedings of the International Conference on Martensitic Transformations. p. 247-250

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  133. Published

    Synchrotron X-rays in the development of multi-phase intermetallic TiAl alloys

    Erdely, P., Staron, P., Stark, A., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conferencePosterResearch

  134. Published

    Wie die Mikrostruktur von Hochleistungswerkstoffen deren mechanische Eigenschaften beeinflusst - eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, Fortschritte in der Metallographie : Sonderbände der Praktischen Metallographie. 1 ed. DGM, Vol. 52. p. 3-13

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  135. 2017
  136. Published
  137. Published

    Impact of Alloying on Stacking Fault Energies in γ-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 17 Nov 2017, In: Applied Sciences : open access journal. 7.2017, 11, 11 p., 1193.

    Research output: Contribution to journalArticleResearchpeer-review

  138. Published

    Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

    Spörk, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 5 Oct 2017, In: Materials and Design. 131.2017, 5 October, p. 286-296 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  139. E-pub ahead of print

    On grain boundary segregation in molybdenum materials

    Leitner, K., Felfer, P. J., Holec, D., Cairney, J. M., Knabl, W., Lorich, A., Clemens, H. & Primig, S., 11 Sept 2017, (E-pub ahead of print) In: Materials and Design. 135.2017, 5 December, p. 204-212 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  140. E-pub ahead of print

    Phase transformations in a β-solidifying γ-TiAl based alloy during rapid solidification

    Kastenhuber, M., Klein, T., Rashkova, B., Weißensteiner, I., Clemens, H. & Mayer, S., 1 Sept 2017, (E-pub ahead of print) In: Intermetallics. 91.2017, December, p. 100-109 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  141. Published

    Crack path identification in a nanostructured pearlitic steel using atom probe tomography

    Leitner, T., Sackl, S., Völker, B., Riedl, H., Clemens, H., Pippan, R. & Hohenwarter, A., 24 Aug 2017, In: Scripta Materialia. 142.2018, 1 January, p. 66-69 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  142. Published

    Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, 14, p. 2658-2667 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  143. E-pub ahead of print

    Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

    Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 9 Jun 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 495-502 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  144. E-pub ahead of print

    Atom probe study of B2 order and A2 disorder of the FeCo matrix in an Fe-Co-Mo-alloy

    Turk, C., Leitner, H., Schemmel, I., Clemens, H. & Primig, S., 19 Mar 2017, (E-pub ahead of print) In: Micron. 98.2017, July, p. 24-33 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  145. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journalArticleResearchpeer-review

  146. E-pub ahead of print

    Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures

    Klein, T., Usategui, L., Rashkova, B., Nó, M. L., San Juan, J. M., Clemens, H. & Mayer, S., 20 Feb 2017, (E-pub ahead of print) In: Acta materialia. 128.2017, 15 April, p. 440-450 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  147. Published

    The Use of Fluorine to Protect β-Solidifying γ-TiAl-Based Alloys against High-Temperature Oxidation

    Donchev, A., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 13 Feb 2017, In: MRS Advances. 2017, May, p. 1361-1367 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  148. E-pub ahead of print

    Impact of Mo on the ωo phase in β-solidifying TiAl alloys: An experimental and computational approach

    Klein, T., Schachermayer, M., Holec, D., Rashkova, B., Clemens, H. & Mayer, S., 1 Feb 2017, (E-pub ahead of print) In: Intermetallics. 85.2017, June, p. 26-33 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  149. Published

    Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel

    Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 7 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600658.

    Research output: Contribution to journalArticleResearchpeer-review

  150. Published

    Advanced Intermetallic TiAl Alloys

    Clemens, H. & Mayer, S., 2017, Materials Science Forum. 879 ed. Vol. 2017. p. 113-118 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  151. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  152. Published

    Atom probe study of prior austenite grain bounda-ries of zinc-coated press hardened steel

    Hofer, C., Kurz, T., Clemens, H. & Schnitzer, R., 2017, 2017 CHS2 Conference Proceedings. p. 383-390

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  153. Published
  154. Published

    Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmoelzer, T., Liss, K.-D., Staron, P., Stark, A., Schwaighofer, E., Lippmann, T., Clemens, H. & Mayer, S., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 395-424

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  155. Published
  156. Published

    Deformation mechanisms and texture evolution in a multi-phase TiAl alloy investigated by means of synchrotron radiation

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017.

    Research output: Contribution to conferencePosterResearch

  157. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126.2017, March, p. 145-153 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  158. Published

    Effect of microstructural instability on the creep resistance of an advanced intermetallic γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2017, In: Intermetallics. 80.2017, January, p. 1-9 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  159. Published

    In situ Experiments with Synchrotron High-Energy X-rays and Neutrons

    Staron, P., Fischer, T., Lippmann, T., Stark, A., Daneshpour, S., Schnubel, D., Uhlmann, E., Gerstenberger, R., Camin, B., Reimers, W., Eidenberger, E., Clemens, H., Huber, N. & Schreyer, A., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 365-376

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  160. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2017, 19th Plansee Seminar. p. 21/1-21/10

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  161. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H., Mayer, S. & Scheu, C., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 3-20

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  162. Published

    Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 2017, In: Materials and Design. 115.2017, 5 February, p. 479-485 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  163. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications

    Staron, P., Schreyer, A., Clemens, H. & Mayer, S., 2017, 2 ed. Wiley-VCH . 462 p.

    Research output: Book/ReportScholarly edition

  164. Published

    Physical metallurgy of the molybdenum base alloy MHC

    Lang, D., Schatte, J., Knabl, W. & Clemens, H., 2017, 19th Plansee Seminar. p. 5/1-5/9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  165. Published

    Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities

    Lang, D., Povoden-Karadeniz, E., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2017, In: Journal of alloys and compounds. 695.2017, 25 February, p. 372-381 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  166. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  167. Published
  168. 2016
  169. Published
  170. Published

    Creep Behavior of a β-solidifying TiAl Alloy with Fully Lamellar Microstructure

    Burtscher, M., Klein, T., Mayer, S. & Clemens, H., 28 Nov 2016.

    Research output: Contribution to conferencePresentationResearch

  171. Published

    Improved ductility and toughness of an FeCoMo alloy

    Turk, C., Kellezi, G., Schemmel, I., Leitner, H. & Clemens, H., 5 Oct 2016.

    Research output: Contribution to conferencePresentationResearch

  172. Published

    Advancement of Compositional and Microstructural Design of Intermetallic γ-TiAl Based Alloys Determined by Atom Probe Tomography

    Klein, T., Clemens, H. & Mayer, S., 6 Sept 2016, In: Materials. 9.2016, 9, p. 755-774 20 p., 755.

    Research output: Contribution to journalArticleResearchpeer-review

  173. Published

    Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel

    Sackl, S. C., Zuber, C., Clemens, H. & Primig, S., 3 May 2016, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 47.2016, July, p. 3694-3703 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  174. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 28 Apr 2016.

    Research output: Contribution to conferencePresentationResearch

  175. Published

    Transmission Kikuchi Diffraction: A technique to support the atom probe specimen preparation

    Babinsky, K., Primig, S. & Clemens, H., 28 Apr 2016.

    Research output: Contribution to conferencePresentationResearch

  176. Published

    Textur- und Gefügeentwicklung in warmgewalzten und wärmebehandelten TNM-Blechen

    Erdely, P., Staron, P., Maawad, E., Schell, N., Bartels, A., Güther, V., Rothe, C., Klose, J., Mayer, S. & Clemens, H., 13 Apr 2016, p. 1-13.

    Research output: Contribution to conferencePresentationResearch

  177. Published

    Designkriterien für kriechfeste Titanaluminid-Legierungen

    Clemens, H. & Mayer, S., 12 Apr 2016, p. 1-18.

    Research output: Contribution to conferencePresentationResearch

  178. Published

    Korngrenzen in technisch reinem Molybdän: Eine atomare Untersuchung mittels Atomsondentomographie

    Babinsky, K., Primig, S., Knabl, W., Lorich, A., Clemens, H. & Sackl, S. C., 12 Apr 2016, p. 1-15. 15 p.

    Research output: Contribution to conferencePresentationResearch

  179. Published

    MATERIAL FOR A GAS TURBINE COMPONENT, METHOD FOR PRODUCING A GAS TURBINE COMPONENT AND GAS TURBINE COMPONENT

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 29 Feb 2016, IPC No. C22F 1/ 18 A I, Patent No. PL2227571T, Priority date 18 Oct 2008, Priority No. EP20080841961

    Research output: Patent

  180. Published
  181. Published

    In Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide Alloy

    Erdely, P., Schmoelzer, T., Schwaighofer, E., Clemens, H., Staron, P., Stark, A., Liss, K.-D. & Mayer, S., 4 Jan 2016, In: Metals : open access journal . 6.2016, 1, p. 1-27 27 p.

    Research output: Contribution to journalArticleResearchpeer-review

  182. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conferencePresentationResearch

  183. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H., Smarsly, W., Güther, V. & Mayer, S., 2016, 13th World Conference on Titanium. USA, p. 1189–1200 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  184. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conferencePresentationResearch

  185. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conferencePresentationResearch

  186. Published

    Analyse einer Co-Cr-W Legierung mittels korrelativer Mikroskopie und Nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conferencePresentationResearch

  187. Published
  188. Published
  189. Published

    Correlative microscopy of a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Micron. 81, p. 1-7

    Research output: Contribution to journalArticleResearchpeer-review

  190. Published

    Correlative study of grain boundary segregation in sintered molybdenum alloys

    Lutz, D., Leitner, K., Huber, K., Lorich, A., Maier-Kiener, V. & Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  191. Published
  192. Published

    Effect of different bainite morphologies on the formability of advanced high strength steels

    Weißensteiner, I., Hebesberger, T. & Clemens, H., 2016.

    Research output: Contribution to conferencePosterResearch

  193. Published

    Einfluss von Aluminium auf die Karbidbildung im Schnellarbeitsstahl

    Kellezi, G., Leitner, H. & Clemens, H., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 3, p. 108-115 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  194. Published

    Evolution of strain-induced hafnium carbides in a molybdenum base MoeHfeC alloy studied by small-angle neutron scattering and complementary methods

    Lang, D., Karge, L., Schatte, J., Gilles, R., Dallinger, R., Weißensteiner, I., Staron, P., Knabl, W., Primig, S. & Clemens, H., 2016, In: Journal of alloys and compounds. 688, p. 619-631 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  195. Published

    Evolution of texture and microstructure in multi-phase TNM sheets during hot rolling and subsequent heat treatments

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Rothe, C., Klose, J., Clemens, H. & Mayer, S., 2016. 1 p.

    Research output: Contribution to conferencePosterResearch

  196. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  197. Published

    Forged Intermetallic γ-TiAl Based Alloy Low Pressure Turbine Blade in the Geared Turbofan

    Habel, U., Heutling, D., Kunze, C., Smarsly, W., Das, G. & Clemens, H., 2016, 13th World Conference on Titanium. USA, p. 1223–1227 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  198. Published

    Fracture Behavior and Delamination Toughening of Molybdenum in Charpy Impact Tests

    Leitner, K., Primig, S., Knabl, W., Lorich, A., Stickler, R. & Clemens, H., 2016, In: JOM. 68, 11, p. 2854-2863 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  199. Published

    Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

    Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 511-518 8 p., 662.

    Research output: Contribution to journalArticleResearchpeer-review

  200. Published

    Improved ductility and toughness of a Fe-Co-Mo alloy

    Turk, C., Kellezi, G., Schemmel, I., Leitner, H. & Clemens, H., 2016, 10th TOOL Conference 2016 – Tool 2016 – DoubleTree by Hilton Hotel Bratislava. p. 112-129 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  201. Published

    Influence of impurities on the fracture behavior of molybdenum-hafnium alloys

    Babinsky, K., Primig, S., Knabl, W., Lorich, A. & Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  202. Published

    Intermetallic titanium aluminides in aerospace applications – processing, microstructure and properties

    Clemens, H. & Mayer, S., 2016, In: Materials at High Temperatures. 33, p. 560-570 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  203. Published

    Metallographie & Werkstoffentwicklung: Eine persönliche Bestandsaufnahme

    Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  204. Published

    Microstructural and mechanical characterization of a hot-extruded TiAl alloy for high-performance racing applications

    Lehmann, O., Burtscher, M., Klein, T., Lindemann, J., Güther, V., Fellmann, H. & Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  205. Published
  206. Published

    Modeling Concepts for Intermetallic Titanium Aluminides

    Appel, F., Clemens, H. & Fischer, F. D., 2016, In: Progress in materials science. 81, p. 55-124

    Research output: Contribution to journalArticleResearchpeer-review

  207. Published
  208. Published
  209. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conferencePresentationResearch

  210. Published

    On the chemistry of the carbides in a molydbenum base Mo-Hf-C alloy produced by powder metallurgy

    Lang, D., Pöhl, C., Holec, D., Schatte, J., Povoden-Karadeniz, E., Knabl, W., Clemens, H. & Primig, S., 2016, In: Journal of alloys and compounds. 654, p. 445-454

    Research output: Contribution to journalArticleResearchpeer-review

  211. Published

    On the evolution of secondary hardening carbides during continuous versus isothermal heat treatment of high speed steel HS 6-5-2

    Sackl, S. C., Leitner, H., Clemens, H. & Primig, S., 2016, In: Materials characterization. p. 323-330 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  212. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy Via Correlative Microscopy

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, In: Practical metallography = Praktische Metallographie. 53, 7, p. 450-461 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  213. Published

    Phasencharakterisierung mittels korrelativer Mikroskopie an einer biokompatiblen Co-Cr-W Legierung

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, Sonderbände der Praktischen Metallographie: Fortschritte in der Metallographie. Vol. 48. p. 151-156 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  214. Published

    Precipitation-strengthened high-temperature ferrites

    Godor, F., Liebscher, C., Stein, F., Palm, M., Rashkova, B., Maier-Kiener, V., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  215. Published

    Preferential site occupancy of alloying elements in TiAl-based phases

    Holec, D., Reddy, R. K., Klein, T. & Clemens, H., 2016, In: Journal of applied physics. 119, p. 1-6 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  216. Published
  217. Published

    Silicon distribution and silicide precipitation during annealing in an advanced multi-phase g-TiAl based alloy

    Klein, T., Rashkova, B., Holec, D., Clemens, H. & Mayer, S., 2016, In: Acta materialia. 110, p. 236-245 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  218. Published
  219. Published

    Specimen preparation to analyze the fracture surface of nanocrystalline pearlite

    Sackl, S. C., Leitner, T., Turk, C., Riedl, H. & Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  220. Published

    Status of Titanium Aluminide for Aero Engine Applications

    Clemens, H., Schloffer, M. & Smarsly, W., 2016.

    Research output: Contribution to conferencePresentationResearch

  221. Published
  222. Published

    Texture evolution in multi-phase TNM sheet materials measured by means of high-energy X-ray diffraction

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conferencePosterResearch

  223. 2015
  224. Published

    Improving the creep behavior and microstructural stability of an advanced γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Mayer, S. & Clemens, H., 14 Dec 2015.

    Research output: Contribution to conferencePresentationResearch

  225. Published

    Material para un componente de turbina de gas, procedimiento para la fabricación de un componente de turbina de gas, así como componente de turbina de gas

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 15 Oct 2015, IPC No. C22F 1/ 18 A I, Patent No. ES2548243T, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  226. Published

    Ab initio study on stacking faults in gamma-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2 Oct 2015.

    Research output: Contribution to conferencePosterResearch

  227. E-pub ahead of print

    Characterization of the high temperature deformatin behavior of two intermetallic TiAl-Mo alloys

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 18 Sept 2015, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 648.2015, 11 November, p. 208-216 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  228. E-pub ahead of print

    Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 21 May 2015, (E-pub ahead of print) In: Acta materialia. 94.2015, 1 August, p. 205-213 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  229. Published

    Enhancing the operation temperature of TiAl-alloys

    Kastenhuber, M., Rashkova, B., Mayer, S. & Clemens, H., 19 May 2015.

    Research output: Contribution to conferencePresentationResearch

  230. E-pub ahead of print

    Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 14 Apr 2015, (E-pub ahead of print) In: Intermetallics. 63.2015, August, p. 19-26 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  231. Published

    Microstructural investigations of a nanocrystalline high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H. & Pippan, R., 8 Apr 2015, p. 319.

    Research output: Contribution to conferencePosterResearchpeer-review

  232. Published

    Boron grain boundary segregation in a heat treatable steel

    Haslberger, P., Turk, C., Babinsky, K., Caliskanoglu, D., Clemens, H. & Primig, S., 15 Mar 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 5, p. 204-208 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  233. Published

    Interplay between effect of Mo and chemical disorder on the stability of β/βo-TiAl phase

    Holec, D., Legut, D., Isaeva, L., Souvatzis, P., Clemens, H. & Mayer, S., 1 Jan 2015, In: Intermetallics. 61, p. 85-90 6 p., 5631.

    Research output: Contribution to journalArticleResearchpeer-review

  234. Published

    Advanced intermetallic titanium aluminides

    Clemens, H., Mayer, S., Smarsly, W., Haberl, U. & Güther, V., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  235. Published
  236. Published

    B2 order transformation in a Fe - 25 at% Co-9 at% Mo alloy

    Turk, C., Kellezi, G., Harald, L., Peter, S., Gan, W., Clemens, H. & Primig, S., 2015, Materials Research Society Symposium Proceedings Vol. 1760. Vol. 1760.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  237. Published

    Bruchverhalten von technisch reinem Molybdan im Kerbschlagbiegeversuch

    Babinsky, K., Lorich, A., Knabl, W., Stickler, R., Clemens, H. & Primig, S., 2015, p. 277.

    Research output: Contribution to conferencePosterResearchpeer-review

  238. Published

    Comparison of continuous and isothermal tempering of a High Speed Steel

    Sackl, S. C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2015, Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials . p. 99-100

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  239. Published

    Comparison of the continuous and isothermal tempering of a HS 6-5-2 high speed steel

    Sackl, S. C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  240. Published

    Correlative microscopy and atom probe tomography of the M-A constituent in a carbide-free bainite

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conferencePosterResearch

  241. Published

    Decording the nanostructure of advanced TiAl alloys

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015, 2 p.

    Research output: Book/ReportCommissioned reportTransferpeer-review

  242. Published
  243. Published

    Evolution of strain-induced precipitates in a molybdenum base Mo-Hf-C alloy

    Lang, D., Karge, L., Schatte, J., Gilles, R., Staron, P., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conferencePosterResearchpeer-review

  244. Published

    Evolution of strain-induced precipitates in a molybdenum base Mo-Hf-C alloy

    Lang, D., Dallinger, R., Karge, L., Schatte, J., Gilles, R., Knabl, W., Staron, P., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  245. Published

    Evolution of strain-induced precipitates in a molybdenum base Mo-Hf-C alloy

    Lang, D., Schatte, J., Knabl, W., Dallinger, R., Clemens, H. & Primig, S., 2015, Proceedings of the 2015 International Conference on Powder Metallurgy & Particulate Materials. Bingert, S. R. & Luk, S. H. (eds.). p. 08-1-08-7

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  246. Published

    Evolution of strain-induced precipitates in a molybdenum-base Mo-Hf-C alloy

    Lang, D., Schatte, J., Knabl, W., Dallinger, R., Clemens, H. & Primig, S., 2015, In: International Journal of Powder Metallurgy. 51, 4

    Research output: Contribution to journalArticleResearchpeer-review

  247. Published

    Evolution of the ω-phase in a multi-phase TiAl alloy and its effect on hardness

    Rashkova, B., Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  248. Published

    Grain boundary study of technically pure molybdenum by combining APT and TKD

    Babinsky, K., Knabl, W., Lorich, A., De Kloe, R., Clemens, H. & Primig, S., 2015, In: Ultramicroscopy. 159, p. 445-451 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  249. Published

    Grain growth and β to α transformation behavior of a β-solidifying TiAl alloy

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2015, In: Advanced engineering materials. 17, 6, p. 786-790

    Research output: Contribution to journalArticleResearchpeer-review

  250. Published
  251. Published

    Honda Foundation Report Nr. 155: The role of materials in progress and limit of technological evolution

    Clemens, H., 2015

    Research output: Book/ReportCommissioned reportTransferpeer-review

  252. Published

    Influence of discontinuous precipitation on the creep behavior of a ß-solidified γ-TiAl based alloy

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 249-258

    Research output: Contribution to journalArticleResearchpeer-review

  253. Published

    Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD

    Turk, C., Clemens, H., Primig, S., Kellezi, G. & Leitner, H., 2015, In: Practical metallography = Praktische Metallographie. 52, 6, p. 323-333

    Research output: Contribution to journalArticleResearchpeer-review

  254. Published

    In-situ Charakterisierungsmethoden: Ein wichtiges Werkzeug bei der Entwicklung von intermetallischen Titanaluminiden

    Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  255. Published

    In-situ high-energy X-ray diffraction on an intermetallic ß-stabilised γ-TiAl based alloy

    Erdely, P., Stark, A., Clemens, H. & Mayer, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 221-225

    Research output: Contribution to journalArticleResearchpeer-review

  256. Published
  257. Published

    In-situ study of the time-temperature-transformation behaviour of an intermetallic γ-TiAl based alloy

    Erdely, P., Werner, R., Schwaighofer, E., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  258. Published
  259. Published

    Intermetallische Titanaluminide als innovative Hochtemperaturleichtbauwerkstoffe – wie materialographische Methoden zu ihrer Entwicklung beigetragen haben

    Clemens, H. & Mayer, S., 2015, Praktische Metallographie. Vol. Sonderband 47 . p. 19-28

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  260. Published
  261. Published
  262. Published
  263. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  264. Published

    Microstructural characterization of intermetallic Mo-containing TiAl-Si alloys after high temperature deformation

    Godor, F., Werner, R., Lindemann, J., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conferencePresentationResearch

  265. Published

    Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with molybdenum content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Schöberl, T., Clemens, H. & Mayer, S., 2015, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 106, p. 1-7

    Research output: Contribution to journalArticleResearchpeer-review

  266. Published

    Microstructure characterization of intermetallic γ-TiAl based alloys after high-temperature deformation

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 239-248

    Research output: Contribution to journalArticleResearchpeer-review

  267. Published

    On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy

    Lang, D., Pöhl, C., Holec, D., Schatte, J., Povoden-Karadeniz, E., Knabl, W., Primig, S. & Clemens, H., 2015.

    Research output: Contribution to conferencePosterResearch

  268. Published

    Order Transition and its impact on mechanical properties of a Fe - 25 at% Co-9 at% Mo alloy

    Turk, C., Kellezi, G., Harald, L., Clemens, H. & Primig, S., 2015, p. 307.

    Research output: Contribution to conferencePosterResearchpeer-review

  269. Published

    Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum

    Primig, S., Clemens, H., Knabl, W., Lorich, A. & Stickler, R., 2015, In: International journal of refractory metals & hard materials. 48, p. 179-186

    Research output: Contribution to journalArticleResearchpeer-review

  270. Published

    Oxidation protection of multiphase Mo-containing γ-TiAl-based alloys under cyclic test conditions

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2015, Materials Research Society Symposium Proceedings Vol. 1760.

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  271. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., Völker, B., Pippan, R. & George, E. P., 2015.

    Research output: Contribution to conferencePosterResearch

  272. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., George, E. P., Völker, B. & Pippan, R., 2015.

    Research output: Contribution to conferencePresentationResearch

  273. Published

    Preparation of carbide-free bainitic steels for EBSD investigations

    Hofer, C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 384-395

    Research output: Contribution to journalArticleResearchpeer-review

  274. Published

    Pulvermetallurgie von intermetallischen Titanaluminiden

    Mayer, S. & Clemens, H., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, p. 513 - 516 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  275. Published

    Reconstruction of grain boundaries by crystallographic features: A method applicable for reflectron data?

    Babinsky, K., Gault, B., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conferencePresentationResearch

  276. Published

    Segregation of C and si in lamellar microstructures of β-solidifying γ-TiAl-based alloys

    Klein, T., Rashkova, B., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  277. Published

    Stacking fault energies and the generalized stacking fault energy of γ-TiAl (ongoing Masterthesis)

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  278. Published

    Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel

    Hofer, C., Harald, L., Winkelhofer, F., Clemens, H. & Primig, S., 2015, In: Materials characterization. 102, p. 85-91

    Research output: Contribution to journalArticleResearchpeer-review

  279. Published

    Texture evolution during deformation of a Mo-Hf-C alloy studied with electron backscatter diffraction

    Lang, D., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 226-230

    Research output: Contribution to journalArticleResearchpeer-review

  280. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  281. Published
  282. 2014
  283. Published
  284. Published

    60. Metallkunde Jubiläumskolloquium - Abstractband

    Mitterer, C. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  285. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  286. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014, Materials Research Society Symposium Proceedings Vol. 1760 Materials Research Society.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  287. Published

    Advanced Steels

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  288. Published
  289. Published

    A novel approach for site-specific atom probe specimen preparation by FIB and transmission-EBSD

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  290. Published

    A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014, In: Ultramicroscopy. 144, p. 9-18

    Research output: Contribution to journalArticleResearchpeer-review

  291. Published

    APT/FIM and neutron diffraction study of the ordering mechanism in a Fe-Co-Mo-alloy

    Turk, C., Primig, S., Clemens, H., Leitner, H. & Kellezi, G., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  292. Published

    Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy

    Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In: Acta materialia. 65, p. 338-350

    Research output: Contribution to journalArticleResearchpeer-review

  293. Published
  294. Published

    Atom probe study of grain boundaries in technically pure molybdenum

    Babinsky, K., Knabl, W., Lorich, A., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  295. Published

    Atom probe tomography of carbides occuring in "carbide-free" bainitic steels

    Hofer, C., Winkelhofer, F., Krammerbauer, J., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  296. Published

    B2 order transformation in a Fe - 25 at% Co - 9 at% Mo alloy

    Turk, C., Kellezi, G., Leitner, H., Gan, W., Staron, P., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  297. Published
  298. Published
  299. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2014, Advanced Materials Research. p. 807-812

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  300. Published
  301. Published
  302. Published

    Development status, applications and perspectives of advanced intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2014, Materials Science Forum. p. 15-20

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  303. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  304. Published
  305. Published

    EBSD Untersuchungen von warmumgeformten Superduplexstahl

    Primig, S., Ragger, K., Clemens, H. & Buchmayr, B., 2014, Sonderbände der Praktischen Metallographie 46. p. 107-112

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  306. Published
  307. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer beta-erstarrenden gamma-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 189-194

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  308. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer β-erstarrenden γ-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, p. 189-194.

    Research output: Contribution to conferencePresentationResearchpeer-review

  309. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 101-106

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  310. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, p. 101-106.

    Research output: Contribution to conferencePresentationResearchpeer-review

  311. Published

    Elektrolytisches Polieren vs. Vibrationspolieren: Entwicklung einer Präparationsmethode zur EBSD-Analyse der Mo-Basislegierung MHC

    Lang, D., Schatte, J., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 59-64

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  312. Published

    Evolution of the omega-phase in a beta-stabilized multi-phase TiAl alloy and its effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Schwaighofer, E., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  313. Published

    Evolution of the ordered omega phase in a beta-stabilized multi-phase TiAl alloy and its effect on hardness

    Schloffer, M., Rashkova, B., Schöberl, T., Schwaighofer, E., Zhang, Z., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 64, p. 241-252

    Research output: Contribution to journalArticleResearchpeer-review

  314. Published

    Evolution of the ω-Phase in a β-stabilized multi-phase TiAl alloy and ist effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  315. Published

    First principles study on the impact of chemical disorder and Mo alloying on stability of the cubic b/bo phase in TiAl

    Holec, D., Legut, D., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  316. Published

    Fortschritte in der Metallographie 46

    Mayer, S. (Editor), Panzenböck, M. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  317. Published

    Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

    Leitner, T., Schloffer, M., Mayer, S., Eßlinger, J., Clemens, H. & Pippan, R., 2014, In: Intermetallics. 53, p. 1-9

    Research output: Contribution to journalArticleResearchpeer-review

  318. Published

    Gefügecharakterisierung intermetallischer gamma-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 113-118

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  319. Published

    Gefügecharakterisierung intermetallischer γ-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, p. 113-118.

    Research output: Contribution to conferencePresentationResearchpeer-review

  320. Published

    High Performance Materials

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  321. Published

    High-temperature oxidation behavior of multi-phase Mo-containing gamma-TiAl-based alloys

    Pflumm, R., Donchev, A., Mayer, S., Clemens, H. & Schütze, M., 2014, In: Intermetallics. 53, p. 45-55

    Research output: Contribution to journalArticleResearchpeer-review

  322. Published

    Hochtemperatur Laser-Scanning Konfokal-Mikroskopie zur in-situ Untersuchung von Kornwachstum und Phasenumwandlungen in intermetallischen gamma-TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 195-200

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  323. Published
  324. Published

    Induction hardening vs conventional hardening of a heat treatable steel

    Sackl, S. C., Leitner, H., Zuber, M., Clemens, H. & Primig, S., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45A, p. 5657-5666

    Research output: Contribution to journalArticleResearchpeer-review

  325. Published
  326. Published
  327. Published
  328. Published

    Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Mayer, S., Lindemann, J., Klose, J., Smarsly, W. & Guether, V., 2014, In: Intermetallics. 44, p. 128-140

    Research output: Contribution to journalArticleResearchpeer-review

  329. Published

    Microstructure and texture evolution in an intermetallic β-stabilized TiAl alloy during forging and subsequent isothermal annealing

    Gaitzenauer, A., Stark, A., Gosslar, D., Clemens, H. & Mayer, S., 2014, In: Advanced engineering materials. 16, p. 445-451

    Research output: Contribution to journalArticleResearchpeer-review

  330. Published

    Microstructure evolution and grain refinement process in an intermetallic TiAl alloy with high Mi content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  331. Published

    Microstructures and mechanical properties of a multi-phase beta-solidifying TiAl alloy densified by spark plasma sintering

    Voisin, T., Monchoux, J.-P., Hantcherli, M., Mayer, S., Clemens, H. & Couret, A., 2014, In: Acta materialia. 73, p. 107-115

    Research output: Contribution to journalArticleResearchpeer-review

  332. Published

    Mikrostruktur - Eigenschaftsbeziehung einer warmumgeformten intermetallischen γ-TiAl-Legierung

    Lehner, A., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  333. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 361-366

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  334. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, p. 361-366.

    Research output: Contribution to conferencePresentationResearchpeer-review

  335. Published

    New findings on the atomistic mechanisms active during mechanical milling of a Fe-Y2O3 model alloy

    Ressel, G., Parz, P., Primig, S., Leitner, H., Clemens, H. & Puff, W., 2014, In: Journal of applied physics. 115, p. 1243131-1243137

    Research output: Contribution to journalArticleResearchpeer-review

  336. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2014, Advanced Materials Research. p. 598-603

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  337. Published

    Oxidation protection of multiphase Mo containing gamma-TiAl based alloys

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  338. Published
  339. Published

    Phasenumwandlungen und Kornwachstumsverhalten in β-stabilisierten TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  340. Published

    Phase transformations and grain growth behaviour in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  341. Published

    Phase transformations and grain growth in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 289-290

    Research output: Contribution to journalArticleResearchpeer-review

  342. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 71-76

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  343. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, p. 71-76.

    Research output: Contribution to conferencePresentationResearchpeer-review

  344. Published

    Thermal properties of Ti-Al alloys: A combined theoretical and experimental approach

    Holec, D., Schmölzer, T., Legut, D., Staron, P. & Clemens, H., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  345. Published

    The use of in-situ characterization techniques for the development of intermetallic titanium aluminides

    Mayer, S., Schwaighofer, E., Schloffer, M. & Clemens, H., 2014, Materials Science Forum. p. 2097-2102

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  346. Published

    Untersuchung des Selbstanlasseffektes von Martensit mit Hilfe von Atomsondentomographie

    Sackl, S. C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 209-214

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  347. Published

    Verein Leobener Werkstoffwissenschafter - Rückblick und Vorschau anlässlich des 25jährigen Bestehens

    Clemens, H., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 395-396

    Research output: Contribution to journalArticleResearchpeer-review

  348. Published

    Widmannstätten austenite formation in a superduplex steel

    Primig, S. & Clemens, H., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  349. 2013
  350. Published

    3D Characterization of an Intermetallic beta/gamma-Titanium aluminide alloy

    Engstler, M., Mayer, S., Pauly, C., Clemens, H. & Mücklich, F., 2013, In: Advanced engineering materials. 15, p. 1125-1128

    Research output: Contribution to journalArticleResearchpeer-review

  351. Published

    59. Metallkunde-Kolloquium - Abstractband

    Mitterer, C. (Editor) & Clemens, H. (Editor), 2013, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  352. Published

    Advanced beta-solidiying titanium aluminides – Development status and perspectives

    Clemens, H., Schloffer, M., Schwaighofer, E., Werner, R., Gaitzenauer, A., Rashkova, B., Schmölzer, T., Pippan, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 3-16

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  353. Published

    An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a beta-phase containing TiAl alloy

    Schmölzer, T., Liss, K.-D., Kirchlechner, C., Mayer, S., Stark, A., Peel, M. & Clemens, H., 2013, In: Intermetallics. 39, p. 25-33

    Research output: Contribution to journalArticleResearchpeer-review

  354. Published

    Charaktersierung des Rissinitierung- und Rissfortschrittverhaltens von Schweißverbindungen hochfester Baustähle mittels Replika-Technik

    Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2013, Prakt. Met. Sonderband 45. p. 127-132

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  355. Published
  356. Published

    Design, processing, microstructure, properties and applications of advanced intermetallic TiAl alloys

    Clemens, H. & Mayer, S., 2013, In: Advanced engineering materials. 15, p. 191-215

    Research output: Contribution to journalArticleResearchpeer-review

  357. Published
  358. Published

    Elastoplastic Buckling as Source of Misinterpretation of Micropillar-Tests

    Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D. & Rammerstorfer, F. G., 2013, In: Acta materialia. 61, p. 4996-5007

    Research output: Contribution to journalArticleResearchpeer-review

  359. Published

    Evolution of the omega-phase and its effect on the hardness of the beta-phase in Ti-44Al-4Nb-1Mo alloys

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2013.

    Research output: Contribution to conferencePosterResearchpeer-review

  360. Published

    First investigations on a TNM TiAl alloy processed by spark plasma sintering

    Voisin, T., Monchoux, J.-P., Clemens, H. & Couret, A., 2013, First investigations on a TNM TiAl alloy processed by spark plasma sintering. Materials Research Society : MRS, p. 17-22

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  361. Published

    Gefüge und Eigenschaften einer mehrphasigen intermetallischen Titanaluminidlegierung für innovative Leichtbauanwendungen

    Gaitzenauer, A., Schenk, M., Kuchling, W., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 113-117

    Research output: Contribution to journalArticleResearchpeer-review

  362. Published

    High temperature oxidation protection of multi-phase Mo-containing TiAl-alloys by the fluorine effect

    Donchev, A., Pflumm, R., Mayer, S., Clemens, H. & Schütze, M., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  363. Published

    Influence of welding parameters on the fatigue behaviour of high strength steels

    Horn, A., Panzenböck, M., Clemens, H. & Posch, G., 2013, In: Materialwissenschaft und Werkstofftechnik. 44, p. 889-896

    Research output: Contribution to journalArticleResearchpeer-review

  364. Published

    In situ high-energy XRD study of the hot-deformation behavior of a novel gamma-TiAl alloy

    Stark, A., Schwaighofer, E., Mayer, S., Clemens, H., Lippmann, T., Lottermoser, L., Schreyer, A. & Pyczak, F., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 71-76

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  365. Published

    Microstructure – Property Relationship in a Near Net Shape Forged γ-TiAl Based Alloy

    Gaitzenauer, A., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013.

    Research output: Contribution to conferencePosterResearchpeer-review

  366. Published

    Near conventional forging of an advanced TiAl alloy

    Huber, D., Clemens, H. & Stockinger, M., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 23-28

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  367. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2013.

    Research output: Contribution to conferencePosterResearchpeer-review

  368. Published

    Optimized Hot-forming of an Intermetallic Multi-phase gamma-TiAl based alloy

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 29-34

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  369. Published

    Relaxation processes at high temperatures in an TiAl-Nb-Mo intermetallics

    Simas, P., Schmölzer, T., Mayer, S., No, M. L., Clemens, H. & Juan, J. S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 41-46

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  370. Published

    Thermodynamic calculations of phase equilibria and phase fractions of a beta-solidifying TiAl alloy using the CHALPAD approach

    Werner, R., Schloffer, M., Schwaighofer, E., Clemens, H. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 59-64

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  371. 2012
  372. Published

    58. Metallkunde-Kolloquium - Abstractband

    Mitterer, C. (Editor), Clemens, H. (Editor) & Kneißl, A. (Editor), 2012, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  373. Published

    Eigenschaftsoptimiertes Warmumformen einer intermetallischen Titanaluminid-Legierung

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 319-322

    Research output: Contribution to journalArticleResearchpeer-review

  374. Published

    Herstellung und Eigenschaften von hochfesten, vergüteten Grobblechen

    Egger, R., Grill, R. & Clemens, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 332-339

    Research output: Contribution to journalArticleResearchpeer-review

  375. Published

    Hot Deformation of Cast and Extruded TiAl: An In-situ Diffraction Study

    Schmölzer, T., Liss, K.-D., Mayer, S., Yan, K., Reid, M., Dippenaar, R., Peel, M. & Clemens, H., 2012,

    Proceedings of International Conference of Processing & Manufacturing of Advanced Materials

    .
    p. 1725-1730

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  376. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journalArticleResearchpeer-review

  377. Published

    Influence of the heating rate on the recrystallization behavior of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, p. 316-324

    Research output: Contribution to journalArticleResearchpeer-review

  378. Published

    In situ forging experiments at HARWI II with advanced TiAl alloys: HASYLAB Annual Report

    Stark, A., Schwaighofer, E., Mayer, S., Lottermoser, L., Lippmann, T., Oehring, M., Clemens, H., Pyczak, F. & Schreyer, A., 2012

    Research output: Non-textual formWeb publication/siteResearch

  379. Published

    In Situ Study of Gamma-TiAl Lamellae Formation in Supersaturated alpha 2-Ti3Al Grains

    Cha, L., Schmölzer, T., Zhang, Z., Mayer, S., Clemens, H., Staron, P. & Dehm, G., 2012, In: Advanced engineering materials. 14, p. 299-303

    Research output: Contribution to journalArticleResearchpeer-review

  380. Published

    In situ study of the hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy: HASYLAB Annual Report

    Schwaighofer, E., Stark, A., Lottermoser, L., René, K., Clemens, H., Mayer, S. & Schell, N., 2012

    Research output: Non-textual formWeb publication/siteResearch

  381. Published

    In situ synchrotron radiation study during hot compressive deformation of a novel gamma TiAl alloy

    Stark, A., Schwaighofer, E., Mayer, S., Lippmann, T., Lottermoser, L., Pyczak, F., Clemens, H. & Schreyer, A., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  382. Published

    In situ synchrotron study of B19 phase formation in an intermetallic gamma-TiAl alloy

    Schmölzer, T., Stark, A., Schwaighofer, E., Lippmann, T., Mayer, S. & Clemens, H., 2012, In: Advanced engineering materials. 14, p. 445-448

    Research output: Contribution to journalArticleResearchpeer-review

  383. Published

    Micro- and nanostructure evolution in intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2012, Ti-2011 - Proceedings of the 12th World Conference on Titanium. p. 395-403

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  384. Published

    Microstructural evolution and mechanical properties of a cast and heat-treated TiAl alloy

    Schwaighofer, E., Lindemann, J., Klose, J., Guether, V., Schloffer, M., Schmölzer, T., Clemens, H. & Mayer, S., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  385. Published

    Microstructure development and hardness of a powder metallurgical multi phase y-TiAl based alloy

    Schloffer, M., Iqbal, F., Gabrisch, H., Schwaighofer, E., Schimansky, F.-P., Mayer, S., Stark, A., Lippmann, T., Göken, M., Pyczak, F. & Clemens, H., 2012, In: Intermetallics. 22, p. 231-240

    Research output: Contribution to journalArticleResearchpeer-review

  386. Published

    Microstructure evolution and grain refinement processes in the intermetallic TiAl-Mo alloy system

    Rashkova, B., Sailer, C., Clemens, H., Schöberl, T., Spiradek-Hahn, K., Brabetz, M., Dehm, G. & Mayer, S., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  387. Published
  388. Published

    Textural evolution during dynamic recovery and static recrystallization of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 4794-4805

    Research output: Contribution to journalArticleResearchpeer-review

  389. Published

    The effect of molybdenum on the phase transformation behavior of beta/gamma-TiAl alloys

    Mayer, S., Sailer, C., Lindemann, J., Lippmann, T., Takeyama, M., Staron, P. & Clemens, H., 2012, Ti-2011 - Proceedings of the 12th World Conference on Titanium. p. 1421-1424

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  390. 2011
  391. Published

    MATERIAL FOR A GAS TURBINE COMPONENT, METHOD FOR PRODUCING A GAS TURBINE COMPONENT AND GAS TURBINE COMPONENT

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 4 Aug 2011, IPC No. C22C 30/ 00 A I, Patent No. US2011189026, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  392. Published

    ガスタービン構成部品のための材料、ガスタービン構成部品の製造方法、及びガスタービン構成部品

    Clemens, H. (Inventor) & Kremmer, S. (Inventor), 20 Jan 2011, IPC No. C22F 1/ 00 A N, Patent No. JP2011502213, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  393. Published

    57. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2011, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  394. Published

    A Novel Preparation Method for Lean Duplex Steels

    Panzenböck, M., Ragger, K., Chladil, H. & Clemens, H., 2011,

    Proceedings in Microscopy & Microanalysis

    .
    p. 1036-1037

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  395. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger, E., Schnitzer, R., Zickler, G., Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2011, In: Advanced engineering materials. p. 664-673

    Research output: Contribution to journalArticleResearchpeer-review

  396. Published

    Characterization of residual stresses in IN718 turbine discs by neutron diffraction and finite element modelling

    Staron, P., Cihak, U., Clemens, H., Stockinger, M. & Schreyer, A., 2011, Euro Superalloys 2010. Vol. 278. p. 102-107 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  397. Published

    Deformation Mechanisms in Micron-Sized PST-TiAl Compression Samples: Experiment and Model

    Rester, M., Fischer, F. D., Kirchlechner, C., Schmölzer, T., Clemens, H. & Dehm, G., 2011, In: Acta materialia. 59, p. 3410-3421

    Research output: Contribution to journalArticleResearchpeer-review

  398. Published

    Dynamic Recovery and Recrystallization During Hot-Working in an Advanced TiAl Alloy

    Schmölzer, T., Liss, K.-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 632-642

    Research output: Contribution to journalArticleResearchpeer-review

  399. Published

    Friction Welding of Intermetallic Titanium Aluminides: Microstructural Evolution and Mechanical Properties

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 572-581

    Research output: Contribution to journalArticleResearchpeer-review

  400. Published

    In situ diffraction experiments for the investigation of phase fractions and ordering temperatures in Ti-44 at% Al-(3-7) at% Mo alloys.

    Schmölzer, T., Mayer, S., Sailer, C., Haupt, F., Güther, V., Staron, P., Liss, K.-D. & Clemens, H., 2011, In: Advanced engineering materials. 13, p. 306-311

    Research output: Contribution to journalArticleResearchpeer-review

  401. Published

    In situ Experiments with Synchrotron High-Energy X-Rays and Neutrons

    Staron, P., Fischer, T., Lippmann, T., Stark, A., Daneshpour, S., Schnubel, D., Uhlmann, E., Gerstenberger, R., Camin, B., Reimers, W., Eidenberger, E., Clemens, H., Huber, N. & Schreyer, A., 2011, In: Advanced engineering materials. p. 658-663

    Research output: Contribution to journalArticleResearchpeer-review

  402. Published

    In-situ TEM heating study of the y lamellae formation inside the alpha2 matrix of a Ti-45Al-7.5Nb alloy

    Cha, L., Clemens, H., Dehm, G. & Zhang, Z., 2011, In: Advanced materials. 146-147, p. 1365-1368

    Research output: Contribution to journalArticleResearchpeer-review

  403. Published
  404. Published
  405. Published

    Light-weight Intermetallic Titanium Aluminides - Status of Research and Development

    Clemens, H. & Smarsly, W., 2011, Euro Superalloys 2010 . p. 551-556 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  406. Published

    Mechanical Properties and Fatigue behaviour of copper interconnect Ribbon

    Pedevilla, M., Panzenböck, M., Clemens, H. & Mitrovitz, N., 2011, Proceedings 26th European Photovoltaic Solar Energy Conference and Exhibition. p. 3547-3549

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  407. Published

    Mechanical Spectroscopy in Advanced TiAl-Nb-Mo Alloys at High Temperature

    Simas, P., Schmölzer, T., No, M. L., Clemens, H. & Juan, J. S., 2011, Materials Research Society symposium proceedings Vol. 1295. Materials Research Society : MRS, p. 139-144

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  408. Published

    Microstructural changes during annealing of LDX 2101 and SAF 2304 in the temperature range of 475 and 700 °C and their effects on the mechanical properties and corrosion behaviour

    Ghanimi, Y., Ragger, K., Panzenböck, M., Clemens, H. & Chladil, H., 2011,

    Proceedings of Stainless Steel World Conference & EXPO

    .
    p. 1-11

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  409. Published
  410. Published

    On phase equilibria and phase transformations in ß/y-TiAl alloys - a short review

    Mayer, S., Sailer, C., Schmölzer, T., Clemens, H., Lippmann, T., Staron, P., Güther, V. & Takeyama, M., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 438-442

    Research output: Contribution to journalArticleResearchpeer-review

  411. Published

    Phase Equilibria and Phase Transformations in Molybdenum-Containing TiAl Alloys

    Mayer, S., Sailer, C., Nakashima, H., Schmölzer, T., Lippmann, T., Staron, P., Liss, K.-D., Clemens, H. & Takeyama, M., 2011, Materials Research Society symposium proceedings Vol. 1295. Materials Research Society : MRS, p. 113-118

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  412. Published

    Phase fraction evolution in a multi-phase intermetallic gamma-TiAl based alloy: HASYLAB Annual Report

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Clemens, H., Stark, A., Staron, P., Lippmann, T. & Mayer, S., 2011

    Research output: Non-textual formWeb publication/siteResearch

  413. Published

    Phase transition and ordering behavior of ternary Ti-Al-Mo alloys using in-situ neutron diffraction

    Kabra, S., Yan, K., Mayer, S., Schmölzer, T., Reid, M., Dippenaar, R., Clemens, H. & Liss, K.-D., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 697-702

    Research output: Contribution to journalArticleResearchpeer-review

  414. Published

    Physical Metallurgy and Properties of ß-solidifying TiAl Based Alloys

    Clemens, H., Schmölzer, T., Schloffer, M., Schwaighofer, E., Mayer, S. & Dehm, G., 2011, Materials Research Society symposium proceedings Volume 1295. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  415. Published

    SANS Study of Carbon Addition in Ti-45Al-5Nb

    Staron, P., Schimansky, F.-P., Scheu, C. & Clemens, H., 2011, Materials Research Society symposium proceedings Vol. 1295. Materials Research Society : MRS, p. 195-200

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  416. Published

    SEM and TEM Investigations of Recovery and Recrystallization in Technically Pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2011, In: Practical metallography = Praktische Metallographie. p. 344-355

    Research output: Contribution to journalArticleResearchpeer-review

  417. Published
  418. Published

    The Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmölzer, T., Liss, K.-D., Peter, S., Mayer, S. & Clemens, H., 2011, In: Advanced engineering materials. p. 685-699

    Research output: Contribution to journalArticleResearchpeer-review

  419. Published
  420. 2010
  421. Published

    WERKSTOFF FÜR EIN GASTURBINENBAUTEIL, VERFAHREN ZUR HERSTELLUNG EINES GASTURBINENBAUTEILS SOWIE GASTURBINENBAUTEIL

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 15 Sept 2010, IPC No. C22F 1/ 18 A I, Patent No. EP2227571, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  422. Published

    56. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2010, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  423. Published

    Analysis of the multistage phase separation reaction in Fe-25 at% Co-9at%Mo

    Eidenberger, E., Schober, M., Schmölzer, T., Stergar, E., Peter, S., Leitner, H. & Clemens, H., 2010, In: Physica status solidi / A. p. 2238-2246

    Research output: Contribution to journalArticleResearchpeer-review

  424. Published

    Behaviour of a maraging steel under quasi-static and dynamic compressive loading

    Lach, E., Schnitzer, R., Leitner, H., Redjaimia, A. & Clemens, H., 2010, In: International journal of microstructure and materials properties (IJMMP). 5, p. 65-78

    Research output: Contribution to journalArticleResearchpeer-review

  425. Published

    Can local hot spots induce alpha2/gamma lamellae during incomplete massive transformation of gamma-TiAl alloys?

    Fischer, F. D., Cha, L., Dehm, G. & Clemens, H., 2010, In: Intermetallics. 18, p. 972-976

    Research output: Contribution to journalArticleResearchpeer-review

  426. Published

    Carbon Strengthening Mechanismus in Ti-48.5Al-0,4C and Ti-45Al-Nb-0.5C Studied by Small-angle Neutron

    Staron, P., Schimansky, F.-P., Scheu, C. & Clemens, H., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  427. Published

    Characterization of the Deformation Behavior of gamma-TiAl Based Alloys by In-situ X-ray Diffraction

    Schmölzer, T., Liss, K.-D., Rester, M., Yan, K., Peel, M. & Clemens, H., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  428. Published

    Characterization of TiAl by means of in-situ synchrotron radiation

    Schmölzer, T., Liss, K.-D., Zickler, G., Mayer, S. & Clemens, H., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  429. Published

    Charakterisierung einer Pulvermetallurgisch hergestellten TNM TM-Titanaluminid Legierung mittels komplementärer quantitativer Methoden

    Schloffer, M., Schmölzer, T., Mayer, S., Schwaighofer, E., Hawranek, G., Schimansky, F.-P., Pyczak, F. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 239-244

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  430. Published

    Dynamic Recovery and Recrystallization during Hot-Working in an advanced tial alloy

    Schmölzer, T., Liss, K.-D., Rester, M., Yan, K., Stark, A., Reid, M., Peel, M. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 215-220

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  431. Published

    Einfluss von Wärmebehandlungen auf das Gefüge einer mehrphasigen Titanalumind-Legierung

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Clemens, H. & Guether, V., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 221-226

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  432. Published

    Erholungs- und Rekristallisationsverhalten von technisch reinem Molybdän

    Primig, S., Leitner, H., Clemens, H., Stickler, R., Lorich, A., Knabl, W. & Köck, W., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 20-25

    Research output: Contribution to journalArticleResearchpeer-review

  433. Published

    Evolution of microstructure and texture in Ti-46Al-9Nb sheet material during tensile flow at elevated temperatures

    Bystrzanowski, S., Bartels, A., Stark, A., Gerling, R., Schimansky, F.-P. & Clemens, H., 2010, In: Intermetallics. p. 1046-1055

    Research output: Contribution to journalArticleResearchpeer-review

  434. Published

    Fortschritte in der Metallographie 42. 2010

    Kneißl, A. (Co-editor) & Clemens, H. (Co-editor), 2010, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  435. Published
  436. Published

    In situ small-angle neutron scattering study of the early stages of precipitation in Fe-25at% Co-9at% Mo and Fe-1at% Cu at 500°C

    Staron, P., Eidenberger, E., Schober, M., Sharp, M., Leitner, H., Schreyer, A. & Clemens, H., 2010, In: Journal of physics / Conference series. 247, p. 1-8

    Research output: Contribution to journalArticleResearchpeer-review

  437. Published

    Intermetallische y-Titanaluminid-Basislegierungen aus metallographischer Sicht

    Clemens, H. & Mayer, S., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 13-21

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  438. Published

    Kinetics of Precipitation in a Complex Hot-Work Tool Steel

    Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J., Fischer, F. D. & Staron, P., 2010, In: Steel research international. 81, p. 64-73

    Research output: Contribution to journalArticleResearchpeer-review

  439. Published
  440. Published

    Metallurgy, Microstructure and Properties of Intermetallic TiAl Ingots

    Güther, V., Rothe, C., Winter, S. & Clemens, H., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 325-329

    Research output: Contribution to journalArticleResearchpeer-review

  441. Published

    NEW SAMPLE ENVIRONMENTS FOR IN-SITU MATERIALS SCIENCE SYNCHROTRON RADIATION STUDIES

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  442. Published

    On the recrystallization behavior of technically pure molybdenum

    Primig, S., Leitner, H., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2010, In: International journal of refractory metals & hard materials. p. 703-708

    Research output: Contribution to journalArticleResearchpeer-review

  443. Published

    Phase fractions, transition and ordering temperatures in TiAl-Nb-Mo alloys: An in- and ex-situ study

    Schmölzer, T., Liss, K.-D., Zickler, G., Watson, I. J., Droessler, L., Wallgram, W., Buslaps, T., Studer, A. & Clemens, H., 2010, In: Intermetallics. p. 1544-1552

    Research output: Contribution to journalArticleResearchpeer-review

  444. Published

    Phase Transition and Ordering Temperatures of TiAl-Mo Alloys Investigated by In-Situ Diffraction Experiments

    Schmölzer, T., Mayer, S., Haupt, F., Zickler, G., Sailer, C., Lottermoser, L., Güther, V., Liss, K.-D. & Clemens, H., 2010, In: Materials Science Forum . p. 456-459

    Research output: Contribution to journalArticleResearchpeer-review

  445. Published
  446. Published

    Precipitation behavior of intermetallic NiAl particles in Fe-6 at.%Al-4 at.%Ni analyzed by SANS and 3DAP

    Schober, M., Lerchbacher, C., Eidenberger, E., Staron, P., Clemens, H. & Leitner, H., 2010, In: Intermetallics. p. 1553-1559

    Research output: Contribution to journalArticleResearchpeer-review

  447. Published

    Reibschweißen von intermetallischen Titanaluminiden - Gefügeentwicklung und mechanische Eigenschaften

    Mayer, S., Appel, L., Cramer, H. & Clemens, H., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 227-232

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  448. Published

    SEM and TEM investigations of recovery and recrystallization in Technically pure Molybdenum

    Primig, S., Leitner, H., Lorich, A., Knabl, W., Clemens, H. & Stickler, R., 2010, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 289-294

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  449. Published
  450. Published

    Short-term creep behavior of chromium rich hot-work tool steels

    Wurmbauer, H., Panzenböck, M., Leitner, H., Scheu, C. & Clemens, H., 2010, In: Materialwissenschaft und Werkstofftechnik. 41, p. 18-28

    Research output: Contribution to journalArticleResearchpeer-review

  451. Published

    Spinodal decomposition in Fe-25 at%Co-9 at%Mo

    Eidenberger, E., Schober, M., Staron, P., Caliskanoglu, D., Leitner, H. & Clemens, H., 2010, In: Intermetallics. p. 2128-2135

    Research output: Contribution to journalArticleResearchpeer-review

  452. Published

    Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

    Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, In: Intermetallics. 18, p. 509-517

    Research output: Contribution to journalArticleResearchpeer-review

  453. Published
  454. Published

    Texture Formation during Hot-Deformation of High-Nb Containing y-TiAl Based Alloys

    Stark, A., Schimansky, F.-P. & Clemens, H., 2010, Texture and anisotropy of polycrystals III : selected, peer reviewed papers from the 3rd International Conference on Texture and Anisotropy of Polycrystals (ITAP-3) held in Göttingen, Germany, 23 - 25 September 2009 . p. 301-306 (Solid state phenomena; vol. 160).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  455. Published

    The effect of Si on phase fractions and transition temperatures of a TiAl-Mo alloy: HASYLAB Annual Report

    Schmölzer, T., Mayer, S., Schwaighofer, E., Lippmann, T., Staron, P., Stark, A. & Clemens, H., 2010

    Research output: Non-textual formWeb publication/siteResearch

  456. Published

    Titan, Titanlegierungen und Titanaluminide - Basis für innovative Anwendungen

    Peters, M. & Clemens, H., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 402-408

    Research output: Contribution to journalArticleResearchpeer-review

  457. 2009
  458. Published

    MATERIAL FOR A GAS TURBINE COMPONENT, METHOD FOR PRODUCING A GAS TURBINE COMPONENT AS WELL AS A GAS TURBINE COMPONENT

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 30 Apr 2009, IPC No. C22F 1/ 18 A I, Patent No. CA2703906, Priority date 18 Oct 2008, Priority No. WO2008DE01702

    Research output: Patent

  459. Published

    Werkstoff für ein Gasturbinenbauteil, Verfahren zur Herstellung eines Gasturbinenbauteils sowie Gasturbinenbauteil

    Chladil, H. (Inventor), Guether, V. (Inventor), Helmut, C. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Smarsly, W. (Inventor), 30 Apr 2009, IPC No. C22C 21/ 00 A I, Patent No. DE102007051499, Priority date 27 Oct 2007, Priority No. DE20071051499

    Research output: Patent

  460. Published

    WERKSTOFF FÜR EIN GASTURBINENBAUTEIL, VERFAHREN ZUR HERSTELLUNG EINES GASTURBINENBAUTEILS SOWIE GASTURBINENBAUTEIL

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 30 Apr 2009, IPC No. C22F 1/ 18 A I, Patent No. WO2009052792, Priority date 27 Oct 2007, Priority No. DE20071051499

    Research output: Patent

  461. Published

    55. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2009, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  462. Published

    Changes in Tempering and its Effect on Precipitation Behaviour in a Hot-work Tool Steel

    Mayer, S., Leitner, H., Scheu, C., Siller, I. & Clemens, H., 2009, In: Steel research international. 80, p. 89-95

    Research output: Contribution to journalArticleResearchpeer-review

  463. Published

    Characterization of Reverted Austenite during Prolonged Ageing of Maraging Steel Corrax

    Höring, S., Abou-Ras, D., Wanderka, N., Leitner, H., Clemens, H. & Banhart, J., 2009, In: Steel research international. 80, p. 84-88

    Research output: Contribution to journalArticleResearchpeer-review

  464. Published
  465. Published
  466. Published

    Entwicklung eines Schmiedeverfahrens zur Umformung von intermetallischen Titanaluminiden

    Wallgram, W., Stockinger, M., Schmölzer, T. & Clemens, H., 2009, Forum für Metallurgie und Werkstofftechnik 2009. p. 49-52

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  467. Published

    Entwicklung und Eigenschaften intermetallischer Titanaluminide für Flugzeugtriebwerke

    Clemens, H., 2009, Gefüge und Bruch. p. 177-187

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  468. Published

    Experimental Studies and Thermodynamic Simulations of Phase Transformations in Ti-(41-45) Al-4Nb-1Mo-0.1B Alloys

    Clemens, H., Böck, B., Wallgram, W., Schmölzer, T., Drössler, L. M., Zickler, G., Leitner, H. & Otto, A., 2009, Experimental Studies and Thermodynamic Simulations of Phase Transformations in Ti-(41-45) Al-4Nb-1Mo-0.1B Alloys. Materials Research Society : MRS, p. 115-120

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  469. Published

    High carbon solubility in a y-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening

    Scheu, C., Stergar, E., Schober, M., Cha, L., Clemens, H., Bartels, C., Schimansky, F.-P. & Cerezo, A., 2009, In: Acta materialia. 57, p. 1504-1511

    Research output: Contribution to journalArticleResearchpeer-review

  470. Published

    Hot-die Forging of a beta-stabilized gamma-TiAl Based Alloys

    Wallgram, W., Kremmer, S., Clemens, H., Otto, A. & Güther, V., 2009, Hot-die Forging of a beta-stabilized gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 109-114

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  471. Published

    Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys

    Cha, L., Scheu, C., Dehm, G., Schnitzer, R. & Clemens, H., 2009, Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 153-158

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  472. Published

    In Situ Characterization of a Nb and Mo Containing y-TiAl Based Alloy Using Neutron Diffraction and High-Temperature Microscopy

    Watson, B. I. J., Liss, K.-D., Clemens, H., Wallgram, W., Schmölzer, T., Hansen, T. C. & Reid, M., 2009, In: Advanced engineering materials. 11, p. 932-937

    Research output: Contribution to journalArticleResearchpeer-review

  473. Published

    In situ study of dynamic recrystallization and hot deformation behavior of a multiphase titanium aluminide alloy

    Liss, K.-D., Schmölzer, T., Yan, K., Reid, M., Peel, M., Dippenaar, R. & Clemens, H., 2009, In: Journal of applied physics. 106, p. 1-10

    Research output: Contribution to journalArticleResearchpeer-review

  474. Published

    Intermetallische Werkstoffe, Flugzeugtriebwerke, Nano und Klimaschutz - ein Widerspruch

    Clemens, H., 2009, Werkstoff- und Nanotechnologien - Rohstoff für Innovationen. p. 19-21

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  475. Published

    Microstructure and Tensile Ductility of a Ti-43Al-4Nb-1Mo-0.1B Alloy

    Drössler, L. M., Schmölzer, T., Wallgram, W., Cha, L., Das, G. & Clemens, H., 2009, Microstructure and Tensile Ductility of a Ti-43Al-4Nb-1Mo-0.1B Alloy. Materials Research Society : MRS, p. 121-126

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  476. Published

    Microstructure and Texture Formation During Near Conventional Forging of an Intermetallic Ti-45Al-5Nb Alloy

    Stark, A., Bartels, A., Clemens, H., Kremmer, S., Schimansky, F.-P. & Gerling, R., 2009, In: Advanced engineering materials. 11, p. 976-981

    Research output: Contribution to journalArticleResearchpeer-review

  477. Published
  478. Published

    New sample environments for in-situ materials science synchrotron radiation studies

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  479. Published

    On the Recrystallization Behavior of Technically Pure Molybdenum

    Primig, S., Leitner, H., Rodriguez Chavez, A., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2009, proc. in 17 th Plansee Seminar. p. 15/1-15/9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  480. Published

    Revealing deformation mechanisms in small dimensions with micro-compression and nanoindentation tests

    Rester, M., Kirchlechner, C., Motz, C., Pippan, R., Clemens, H. & Dehm, G., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  481. Published
  482. Published

    Technology and mechanical properties of advanced y-TiAl based alloys

    Wallgram, W., Schmölzer, T., Cha, L., Das, G., Güther, V. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1021-1029

    Research output: Contribution to journalArticleResearchpeer-review

  483. Published
  484. Published
  485. Published

    Triebwerke von morgen: effizient, leicht, leiste

    Clemens, H., 2009, Stoffe aus denen die Zukunft ist. p. 9-9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  486. Published

    Werkstoffe als Motor des Fortschritts

    Clemens, H., 2009, Stoffe aus denen die Zukunft ist. p. 15-15

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  487. Published

    Werkstoffwissenschaft

    Clemens, H., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154 Jg., p. 342-345

    Research output: Contribution to journalArticleResearchpeer-review

  488. 2008
  489. Published

    54. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2008, Eigenverlag.

    Research output: Book/ReportAnthologyResearch

  490. Published

    A beta-stabilized gamma-TiAl Based Alloy for improved processing performance

    Clemens, H., Chladil, H., Wallgram, W., Böck, B., Kremmer, S., Otto, A., Güther, V. & Bartels, A., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 217-228

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  491. Published

    Characteristics of the tensile flow behavior of Nb-46Al-9Nb sheet material – analysis of thermally-activated processes of plastic deformation

    Bystrzanowski, S., BARTELS, A., Clemens, H. & Gerling, R., 2008, In: Intermetallics. 16, p. 717-726

    Research output: Contribution to journalArticleResearchpeer-review

  492. Published

    Characterization of Phospholipid Bilayers on Ti-6Al-4V and Ti-6Al-7Nb

    Pressl, D., Teichert, C., Hlawacek, G., Clemens, H., Iliev, P. P., Schuster, A., Feyerabend, F. & Willumeit, R., 2008, In: Advanced engineering materials. 10, p. B47-B52

    Research output: Contribution to journalArticleResearchpeer-review

  493. Published

    Computational Analysis of the Precipitation Kinetics in a Complex Tool Steel

    Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J. & Fischer, F. D., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 410-415

    Research output: Contribution to journalArticleResearchpeer-review

  494. Published

    Design of Novel ß-solidifying TiAl Alloys with Adjustable ß/B2-phase Fraction and Excellent Hot-Workability

    Clemens, H., Wallgram, W., Kremmer, S., Güther, V., Otto, A. & Bartels, A., 2008, In: Advanced engineering materials. 10, p. 707-713

    Research output: Contribution to journalArticleResearchpeer-review

  495. Published

    Diffraction-based Residual Stress Analysis Applied to Problems in the Aircraft Industry

    Staron, P., Cihak, U., Clemens, H., Stockinger, M., Bayraktar, F. S., Vaidya, V. V., Kocak, M. & Schreyer, A., 2008, Neutrons and Synchrotron Radiation in Engineering Materials Science from Fundamentals to Material and Component Characterization. p. 389-412

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  496. Published

    Directional Atomic Rearrangements during Transformations between the apha- and gamma-phases in TiAl”

    Liss, K.-D., Stark, A., BARTELS, A., Clemens, H., Buslaps, T., Phelan, D. & Yeoh, L., 2008, In: Advanced engineering materials. 10, p. 389-392

    Research output: Contribution to journalArticleResearchpeer-review

  497. Published

    In- and Ex-situ Investigation of the beta-phase in a Nb and Mo Containing gamma-TiAl Based Alloy

    Clemens, H., Chladil, H., Wallgram, W., Zickler, G., Gerling, R., Liss, K.-D., Kremmer, S., Güther, V. & Smarsly, W., 2008, In: Intermetallics. 16, p. 827-833

    Research output: Contribution to journalArticleResearchpeer-review

  498. Published

    Influence of aluminium nitride on the high-temperature ductility of continuous cast slabs

    Winkelhofer, F., Parteder, E., Clemens, H., Leitner, H., Spiradek-Hahn, K. & Kozeschnik, E., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 159-172

    Research output: Contribution to journalArticleResearchpeer-review

  499. Published

    Influence of C and Nb Concentration on the High Temperature Deformation Behaviour of Nb-rich Gamma-TiAl Alloys

    Stark, A., Bartels, A., Schimansky, F.-P., Gerling, R. & Clemens, H., 2008, Ti-2007 Science and Technology. p. 685-688

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  500. Published

    INFLUENCE OF OXIDATION PROTECTIVE COATINGS ON THE DUCTILITY OF A gamma-TiAl BASED ALLOY

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008,

    The Minerals, Metals & Materials Society, 137th annual meeting proceedings

    .
    TMS, p. 305-313

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  501. Published

    In-situ Characterization of Phase Transformations and Microstructure Evolution in a gamma-TiAl Based Alloys

    Liss, K.-D., BARTELS, A., Clemens, H., Stark, A., Buslaps, T., Phelan, D. & Yeoh, L. A., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 137-144

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  502. Published

    In-situ high-temperature characterisation of phase transformations in intermetallic γ-TiAl alloys

    Zickler, G., Drössler, L., Clemens, H., Klaus-Dieter, L. & Hölzel, M., 2008

    Research output: Book/ReportCommissioned reportTransferpeer-review

  503. Published

    In-situ High-Temperature SAXS Studies of the Precipitation Kinetics in a Fe-Co-Mo Alloy

    Zickler, G., Eidenberger, E., Stergar, E., Leitner, H., Clemens, H., Lippmann, T., Staron, P., Fischer, T., Schreyer, A. & Novak, R., 2008

    Research output: Book/ReportCommissioned reportTransferpeer-review

  504. Published

    In-situ small-angle X-ray scattering study of the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy

    Zickler, G., Eidenberger, E., Leitner, H., Stergar, E., Clemens, H., Staron, P., Lippmann, T. & Schreyer, A., 2008, In: Materials characterization. 59, p. 1809-1813

    Research output: Contribution to journalArticleResearchpeer-review

  505. Published

    Intermetallische Werkstoffe für Anwendungen in Automobil- und Flugzeugtriebwerken

    Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 337-341

    Research output: Contribution to journalArticleResearchpeer-review

  506. Published

    Isothermal aging kinetics of NiAl precipitates in a secondary hardening steel

    Erlach, S., Siller, I., Leitner, H. & Clemens, H., 2008, In: International journal of microstructure and materials properties (IJMMP). 3, p. 373-382

    Research output: Contribution to journalArticleResearchpeer-review

  507. Published

    Kurzzeitkriechverhalten eines Warmarbeitsstahls

    Wurmbauer, H., Scheu, C., Panzenböck, M., Stergar, E., Leitner, H., Clemens, H. & Caliskanoglu, Z. D., 2008, Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung. p. 251-256

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  508. Published

    Microstructure and corresponding tensile properties of As-cast, beta-solidifying, gamma-TiAl based TNM alloys

    Güther, V., Otto, A., Klose, J., Rothe, C., Clemens, H., Kachler, W., Winter, S. & Kremmer, S., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 249-256

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  509. Published

    Microstructure and Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  510. Published

    Microstructure and Mechanical Properties of Ti-45Al-5Nb + (0 - 0.5C) Sheets

    Gerling, R., Schimansky, F. P., Stark, A., BARTELS, A., Kestler, H., Cha, L., Scheu, C. & Clemens, H., 2008, In: Intermetallics. 16, p. 689-697

    Research output: Contribution to journalArticleResearchpeer-review

  511. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H. & Scheu, C., 2008, Neutrons and Synchrotron Radiation in Engineering Materials Science from Fundamentals to Material and Component Characterization. p. 3-20

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  512. Published

    Nanometer-scaled lamellar microstructures in Ti–45Al–7.5Nb–(0; 0.5)C alloys and their influence on hardness

    Cha, L., Scheu, C., Clemens, H., Chladil, H., Dehm, G., Gerling, R. & BARTELS, A., 2008, In: Intermetallics. 16, p. 868-875

    Research output: Contribution to journalArticleResearchpeer-review

  513. Published

    Near Conventional Forging of Titanium Aluminides

    Kremmer, S., Chladil, H., Clemens, H., Otto, A. & Güther, V., 2008, Ti-2007 Science and Technology. p. 989-992

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  514. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science

    Reimers, W. (Co-editor), Pyzalla, A. (Co-editor), Schreyer, A. (Co-editor) & Clemens, H. (Co-editor), 2008, Weinheim: Wiley-VCH .

    Research output: Book/ReportBookResearch

  515. Published

    Observation of the precipitation behaviour of Fe-25Co-15Mo by SANS and 3DAP

    Eidenberger, E., Stergar, E., Staron, P., Leitner, H. & Clemens, H., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  516. Published

    On the Formation of Ordered w-phase in High Nb Containing γ-TiAl Based Alloys”

    Stark, A., BARTELS, A., Clemens, H. & Schimansky, F.-P., 2008, In: Advanced engineering materials. 10, p. 929-934

    Research output: Contribution to journalArticleResearchpeer-review

  517. Published

    On the influence of coating and oxidation on the mechanical properties of a gamma-TiAl based alloy

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008, In: Intermetallics. 16, p. 1206-1211

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 Next