Service-Centers

Organisational unit: Centralised Services

1 - 215 out of 215Page size: 500

Research output

  1. 2025
  2. Published

    DigiTeRRI: Responsible Innovation in industry territories

    Hörlesberger, M. & Kriszt, B., 2025, Strategies For Responsible Innovation : Perspectives, Projects, and Tools for Co-creating the Future e Want. Martinuzzi, A. (ed.). 1. Auflage ed. London and New York: Routledge, p. 199 24 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  3. Published

    Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing

    Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Interaction of Binder and Powder in Processing of Titanium by MEX-AM

    Kukla, C., Gordo, E., Schuschnigg, S., Villemur, J., Luna, P. & Holzer, C., 2025, The 7th Powder Metallurgy and Additive Manufacturing of Titanium (PMTi 2024): Selected peer-reviewed extended articles based on abstracts presented at the 7th International Conference on Powder Metallurgy and Additive Manufacturing of Titanium (PMTi2024). Gordo Odériz, E. & Ruiz-Navas, E. M. (eds.). Trans Tech Publications, p. 93-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    On the Road Towards Understanding Squats - Metallographic Investigations of Rails

    Gschwandl, T., Spalek, A., Antretter, T. & Daves, W., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 314-323 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Roles of Responsible Research and Innovation keys in the additive manufacturing web of innovation value chains and business

    Kriszt, B., Jimenez Iturriza, I. & Hörlesberger, M., 2025, Strategies For Responsible Innovation: Perspectives, Projekts, and Tools for Co-creation the Future We Want. Martinuzzi, A. (ed.). 1- Auflage ed. London and New York: Routledge, p. 125 20 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  7. 2024
  8. Published

    Feedstock Development for Material Extrusion of Aluminium: Printability and Debinding

    Schuschnigg, S., Momeni, V. & Kukla, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials New Perspectives. Leoben, Vol. 32. p. 132 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Environmental Social Governance (ESG) ... Distraction or Revolution?

    Posch, W. (Publisher), Feichtinger, G. (Publisher) & Kircher, V. (Publisher), 6 Nov 2024, 12 p.

    Research output: Book/Report › Book › Research

  10. Published

    SDG12 in Conversation with the Arts: Transversal Responses - Filling the Gaps

    Gritzner, K., Kollnig, S. & Glogowski, D., 19 Sept 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour

    Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept 2024, In: Materials Science and Engineering: A. 915.2024, November, 14 p., 147270.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminium

    Momeni, V., Shahroodi, Z., Hufnagl, M., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 8 Aug 2024, In: Results in Engineering. 23.2024, September, 12 p., 102692.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection Molding

    Momeni, V., Luca, S., Gonzalez-Gutierrez, J., Cano, S., Sueur, E., Shahroodi, Z., Schuschnigg, S., Kukla, C. & Holzer, C., Jul 2024, In: Applied Sciences (Switzerland). 14.2024, 13, 15 p., 5638.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Bio-Based Backbone for Highly Reactive Metal Alloys Feedstocks for MEX

    Holzer, C., Momeni, V., Pöhle, G., Riecker, S., Schuschnigg, S. & Kukla, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  15. Published

    Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion Moulding

    Rathfelder, S., Schuschnigg, S., Kukla, C., Holzer, C. & Burkhardt, C., 18 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 2, 19 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection moulding

    Sadaf, M., Cano Cano, S., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály, L., Kukla, C., Kitzmantel, M., Nanni, F. & Gonzalez-Gutierrez, J., 21 Feb 2024, (E-pub ahead of print) In: Journal of Materials Research and Technology. 29.2024, March-April, p. 4433-4444 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Complexity in Action: Inter- and Transdisciplinarity in EURECA-PRO

    Gritzner, K. & Kollnig, S., 29 Jan 2024, In: Berg- und hüttenmännische Monatshefte : BHM. 16.2024, 2, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Polylactic Acid (PLA) as Backbone for the Fused Filament Fabrication (FFF) of Aluminium

    Kukla, C., Momeni, V., Schuschnigg, S. & Holzer, C., 2024, Proceedings - Euro PM 2024 Congress and Exhibition. (Proceedings - Euro PM 2024 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. 2023
  20. Published

    Susmagpro

    Schuschnigg, S. & Kukla, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Debinding And Sintering Strategies For Fused Filament Fabrication Of Aluminium Alloys

    Poehle, G., Quadbeck, P., Riecker, S., Kukla, C., Momeni, V. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Filament Development for Metallic Fused Filament Fabrication of Aluminium Alloys

    Kukla, C., Momeni, V., Poehle, G., Riecker, S. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Education 4.0: MiReBooks: Development and Usage of Mixed Reality for Teaching Mining in Higher Education

    Murphy, M., Labrador Ortega, M., Moser, P. & Feiel, S., 6 Jul 2023, p. 1485-1492. 8 p.

    Research output: Contribution to conference › Presentation › Education › peer-review

  25. Published

    Paving the way for sustainable consumption and production patterns through research of a European University Alliance

    Kircher, V., Moser, P., Feiel, S. & Griebler, A., Jul 2023, p. 378-379. 2 p.

    Research output: Contribution to conference › Abstract › peer-review

  26. Published

    Current challenges in NdFeB permanent magnets manufacturing by Powder Injection Molding (PIM): A review

    Crozier-Bioud, T., Momeni, V., Gonzalez-Gutierrez, J., Kukla, C., Luca, S. & Rolere, S., May 2023, In: Materials today. Physics. 34.2023, May, 13 p., 101082.

    Research output: Contribution to journal › Review article › peer-review

  27. Published

    Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology

    Liu, D., Hentschel, L., Lin, G., Kukla, C., Schuschnigg, S., Ma, N., Wallis, C., Momeni, V., Kitzmantel, M. & Sui, G., 25 Apr 2023, In: Journal of Materials Engineering and Performance. 32.2023, 20, p. 9174-9181 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Research Progress on Low-Pressure Powder Injection Molding

    Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.

    Research output: Contribution to journal › Review article › peer-review

  29. Published

    About responsibility in production and consumption

    Kollnig, S., 2023, Global Challenges for a Sustainable Society. The European University for Responsible Consumption and Production.. Springer, (Springer Proceedings in Earth and Environmental Sciences).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  30. Published

    Validation Of Alternative Binders for Pellet Extrusion 3D Printing Of 316L Steels

    de la Camacha, A. G., Tabares, E., Jiménez-Morales, A., Schsuchnigg, S., Kukla, C., Cano, S. & Gordo, E., 2023.

    Research output: Contribution to conference › Paper › peer-review

  31. 2022
  32. Published

    Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

    Sadaf, M., Cano Cano, S., Gonzalez-Gutierrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály , L., Kitzmantel, M. & Nanni, F., 16 Nov 2022, In: Polymers / Molecular Diversity Preservation International. 14.2022, 22, 23 p., 4962.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Das Bibliothekspersonal mittlerer Qualifikation an Österreichs Universitäten: Historische Entwicklung, aktuelle Rolle und Aufstiegsperspektiven

    Slama, C. & Zechner-Matscheko, E., 2 Nov 2022, In: Mitteilungen der Vereinigung Österreichischer Bibliothekarinnen & Bibliothekare. 75.2022, 2, p. 410-461 51 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Teaching and Research in the Digital World.

    Lagoudakis, M., Gkizeli, M., Fotiou, A., Fragkedaki, D. & Kollnig, S., 6 Oct 2022, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 10, p. 489–494 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Eight Become One: the EURECA-PRO University Network

    Kircher, V., Feiel, S., Bongaerts, J. C., Sishchuk, J., Drebenstedt, C., Lagoudakis, M., Fragkedaki, K., García-Llamas, P., Suárez-Corona, A., Fernández-Raga, M., Baelo-Álvarez, R., Górski, M., Pawełczyk, M., Hochstein, S., Walter, S., Speck, M., Ravas, O., Van Hellemont, E. & Vancauwenbergh, S., 4 Oct 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167:2022, 10, p. 462-471 10 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  36. Published

    The (R)Evolution of European Education Policy: European Higher Education Alliances

    Moser, P., Feiel, S. & Kircher, V., 12 Sept 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 10, p. 457-461 5 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  37. Published

    Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding

    Ghasemi-Mobarakeh, L., Cano, S., Momeni, V., Liu, D., Duretek, I., Riess, G., Kukla, C. & Holzer, C., 2 Sept 2022, In: Polymers. 14.2022, 17, 15 p., 3653.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Developing a Feedstock for the Fused Filament Fabrication (FFF) of Aluminium

    Momeni, V., Shahroodi, Z., Kukla, C. & Holzer, C., Sept 2022, Conference: 2nd International Conference on Polymer Process Innovation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    CARRIER ROLLER WITH SENSOR FOR SENSING SIGNALS BEING CHARACTERISTIC FOR TEMPERATURE AND STRAIN AT A ROLLER SHAFT

    Moser, P. (Inventor), Kern, W. (Inventor), Grießer, T. (Inventor) & Feiel, S. (Inventor), 11 May 2022, IPC No. G01B 7/ 16 A N, Patent No. EP3995418, Priority date 9 Nov 2020, Priority No. EP20200206481

    Research output: Patent

  40. Published

    ROCK ANCHOR WITH SENSOR FOR MEASURING A MECHANICAL TENSION

    Feiel, S. (Inventor), Kern, W. (Inventor), Griesser, T. (Inventor) & Moser, P. (Inventor), 5 May 2022, IPC No. F16B 31/ 02 A I, Patent No. US2022136389, Priority date 6 Feb 2020, Priority No. WO2020EP53028

    Research output: Patent

  41. Published

    Forschungsdimension der European University on Responsible Consumption and Production – EURECA-PRO

    Kircher, V., Griebler, A., Feiel, S. & Moser, P., 11 Mar 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 4, p. 187-192 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Metal fused filament fabrication of the nickel-base superalloy IN 718

    Thompson, Y., Zissel, K., Förner, A., Gonzalez-Gutierrez, J., Kukla, C., Neumeier, S. & Felfer, P., 3 Feb 2022, In: Journal of materials science. 57.2022, June, p. 9541-9555 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Crossing Boundaries for Sustainable Development

    Kollnig, S., 2022, In: Forum : Discussing international education. 2022, Summer, p. 36-38 3 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  44. Published

    D2.4 FINAL CONCEPTUAL MODEL ON WEB OF INNOVATION VALUE CHAINS IN ADDITIVE MANUFACTURING: IAMRRI_D2_4

    Soetanto, D., Spring, M., Sischarenco, E., Kriszt, B., Jimenez Iturriza, I., Bierwirth, A., Hörlesberger, M., Wepner, B. & Kasztler, A., 2022, 69 p.

    Research output: Book/Report › Commissioned report › Research

  45. Published

    D5.2 SIMULATION RESULTS - COLLECTION OF ALL SCENARIOS AND ASSUMPTIONS, MODEL INPUT DATA, SIMULATIONS RESULTS, INCLUD-ING CALIBRATION OF THE MODEL AND SUMMARY OF THE MAIN INSIGHTS COMING FROM THE SIMULATIONS: IAMRRI_D5.2_V1

    Cozzoni, E., Ponsiglione, C., Passavanti, C., Kriszt, B. & Windisch-Kern, C., 2022, 34 p.

    Research output: Book/Report › Commissioned report › Research

  46. Published

    D5.3 STRATEGIC RECOMMENDATIONS: STRATEGIC RECOMMENDATIONS ON RRI OPENINGS IN THE WIVC IN AM (IAMRRI_D5.3_V1)

    Jimenez Iturriza, I., Arroyo, A., Luomaranta, T., Martinsuo, M., Hörlesberger, M., Cozzoni, E., Kriszt, B., Nguyen, N., Sobota, V., van de Kaa, G. & Soetanto, D., 2022, 28 p.

    Research output: Book/Report › Commissioned report › Research

  47. Published

    D6.4 SUMMARY OF THE FUTURE CONFERENCE: D6.4 The future conference (named IAMRRI Future Talk) reflects the entire work undertaken throughout the project including the foresight process. The reflexion of foresight and discussion points are given, this open-up the developed scenarios and the RRI understanding of the future.

    Hörlesberger, M., Wepner, B. & Kriszt, B., 2022, 15 p.

    Research output: Book/Report › Commissioned report › Research

  48. Published

    D7.4 PROJECT BOOKLET AND PROJECT VIDEOS ONLINE: WP7 Dissemination

    Kriszt, B., 2022, 59 p.

    Research output: Book/Report › Commissioned report › Research

  49. Published

    Filamentbasierter 3D-Druck für Metalle, Hartmetalle und Cermets

    Kukla, C., Duretek, I. & Lengauer, W., 2022, Pulvermetallurgie in Wissenschaft und Praxis: Pulvermetallurgie - vielfältige Prozesse und Werkstoffe. Broeckmann, C., Danninger, H. & Kaletsch, A. (eds.). Vol. 37. p. 75-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    High-resolution characterization of precipitates in multi-layer submerged-arc welded 2.25Cr-1Mo-0.25V steel

    Fleißner-Rieger, H., Kremmer, T., Brabetz, M., Krein, R., Pahr, H., Peruzzi, M. & Schnitzer, R., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103299.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Roadmap für die digitale Transformation der Obersteiermark: European Union Horizon 2020 research and innovation programme - grant agreement n°873010

    Kriszt, B., Schmidbauer, J., Weber, E. & Edler, F., 2022, 12 p. Leoben

    Research output: Other contribution › Transfer

  52. 2021
  53. Published

    GEBIRGSANKER MIT SENSOR ZUR MESSUNG MECHANISCHER SPANNUNG

    Feiel, S. (Inventor), Kern, W. (Inventor), Griesser, T. (Inventor) & Moser, P. (Inventor), 29 Dec 2021, IPC No. E21D 21/ 02 A I, Patent No. EP3927942, Priority date 6 Feb 2020, Priority No. WO2020EP53028

    Research output: Patent

  54. Published

    Europe's mining innovation trends and their contribution to the sustainable development goals: Blind spots and strong points

    Endl, A., Tost, M., Hitch, M., Moser, P. & Feiel, S., 11 Dec 2021, In: Resources Policy. 74.2021, December, 11 p., 101440.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

    Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72.2021, November, p. 604-612 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Sieben Jahre EIT RawMaterials Regional Center in Leoben – Rohstoffforschung im Kontext Globaler Entwicklung

    Bertignoll, H. & Feiel, S., 6 Oct 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 10, p. 478-484 7 p.

    Research output: Contribution to journal › Article › Transfer

  57. Published

    EURECA-PRO: The European University on Responsible Consumption and Production

    Pichler, L., Egger, J., Feiel, S., Kircher, V. & Kosciuszko, A., 16 Sept 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 10, p. 500-504 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Material extrusion additive manufacturing of multi-material components

    Cano Cano, S., Valy, L., Liu, D., Maurer, P., Ma, N., Czernilofsky, F., Schuschnigg, S., Sui, G., Kitzmantel, M., Kukla, C. & Gonzalez-Gutierrez, J., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 184 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium

    Thompson, Y., Polzer, M., Gonzalez-Gutierrez, J., Kasian, O., Heckl, J. P., Dalbauer, V., Kukla, C. & Felfer, P., 12 Sept 2021, In: Advanced Engineering Materials. 23.2021, 12, 12 p., 2100380.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    EURECA-PRO, The European University on Responsible Consumption and Production: An Alliance for Sustainability

    Feiel, S., Frühauf, S., Pichler, L., Kircher, V., Kosciuszko, A. & Egger, J., 8 Sept 2021, p. 153. 167 p.

    Research output: Contribution to conference › Paper › peer-review

  61. Published

    Rock bolt having sensor for measuring mechanical tension

    Feiel, S. (Inventor), Kern, W. (Inventor), Griesser, T. (Inventor) & Moser, P. (Inventor), 26 Aug 2021, IPC No. E21D 21/ 02 A I, Patent No. AU2020223803, Priority date 6 Feb 2020, Priority No. WO2020EP53028

    Research output: Patent

  62. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    EURECA-PRO, The European University Alliance on Responsible Consumption and Production

    Moser, P., Feiel, S., Barbknecht, K.-D., Diamadopoulos, E., Mężyk, A., Baelo, R., Radu, S. M., Hilmer, L. & Komnitsas, K., 30 Jun 2021, Proceedings of the European Metallurgical Conference 2021. 1 ed. Clausthal, Vol. 1. p. 1-15 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

    Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks

    Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Interim Report for the Activities of the First Half Year 2021A | Austrian branch Centre Mining Education UNESCO

    Voica, A., Brandl, J., Trettler, M. & Kucheryavaya, A., 2021, 52 p.

    Research output: Book/Report › Commissioned report › Research

  67. Published

    Phase constitution in an intermetallic Ti-37Al-10Nb alloy: what we can learn about the phase equilibria

    Rashkova, B., Brabetz, M., Mendez Martin, F., Distl, B., Hauschildt, K., Stein, F. & Clemens, H., 2021.

    Research output: Contribution to conference › Poster › Research

  68. Published

    Regional Development with RRI Approach

    Hörlesberger , M. & Kriszt, B., 2021, p. 168.

    Research output: Contribution to conference › Paper › peer-review

  69. Published

    The IAMRRI Booklet: Future Talk on Innovation in Additive Manufacturing & Openings for Responsible Research and Innovation

    Kriszt, B., 2021

    Research output: Book/Report › Anthology › Research

  70. 2020
  71. Published

    Selective Laser Melting of a Near-alpha Ti6242S Alloy for High-Performance Automotive Parts

    Fleißner-Rieger, C., Pfeifer, T., Jörg, T., Kremmer, T., Brabetz, M., Clemens, H. & Mayer, S., 17 Dec 2020, In: Advanced engineering materials. 2021, p. 1-12 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Rheological Behaviour of Highly Filled Materials for Injection Moulding and Additive Manufacturing: Effect of Particle Material and Loading

    Bek, M., Gonzalez-Gutierrez, J., Kukla, C., Pušnik Crešnar, K., Maroh, B. & Slemenik Perše, L., 2 Nov 2020, In: Applied Sciences : open access journal. 10, 22, p. 1-23 23 p., 7993.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Factors Affecting the Properties of POM-based Feedstocks for Fused Filament Fabrication/FFF

    Kukla, C., Hentschel, L., Cano Cano, S., Kitzmantel, M., Holzer, C. & Gonzalez-Gutierrez, J., 5 Oct 2020. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  74. Published

    GEBIRGSANKER MIT SENSOR ZUR MESSUNG MECHANISCHER SPANNUNG

    Moser, P. (Inventor), Feiel, S. (Inventor), Kern, W. (Inventor) & Griesser, T. (Inventor), 27 Aug 2020, IPC No. E21D 21/ 02 A I, Patent No. WO2020169356, Priority date 19 Feb 2019, Priority No. AT20190060039

    Research output: Patent

  75. Published

    ROCK ANCHOR WITH SENSOR FOR MEASURING MECHANICAL TENSION

    Moser, P. (Inventor), Feiel, S. (Inventor), Kern, W. (Inventor) & Griesser, T. (Inventor), 27 Aug 2020, IPC No. E21D 21/ 02 A I, Patent No. CA3130662, Priority date 6 Feb 2020, Priority No. WO2020EP53028

    Research output: Patent

  76. Published

    Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

    Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

    Research output: Contribution to journal › Article › Research

  77. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Carbon prices for meeting the Paris agreement and their impact on key metals

    Tost, M., Hitch, M., Lutter, S., Feiel, S. & Moser, P., Apr 2020, In: The Extractive Industries and Society. 7.2020, 2, p. 593-599 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Tools for Teaching Mining Students in Virtual Reality based on 360° Video Experiences

    Kalkofen, D., Shohei, M., Ladinig, T., Feiel, S., Labrador Ortega, M., Moser, P., Drebenstedt, C., Ebner, M., Shepel, T., Hitch, M., Laine, T., Tibbett, J., Gabl, S., Daling, L. & Abdelrazeq , A., Mar 2020, 2020 IEEE Conference on Virtual Reality and 3D User Interfaces . p. 455-459 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

    Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb 2020, In: Applied Sciences : open access journal. 10.2020, 4, 18 p., 1471.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Austrian Materials Foresight: Foresight für Hochleistungswerkstoffe zur Stärkung des Wissens- und Produktionsstandortes Österreich

    Hribernik , B., Kriszt, B. & Hörlesberger, M., Feb 2020, 107 p.

    Research output: Other contribution › Transfer

  82. Published

    Ecosystem services costs of metal mining and pressures on biomes

    Tost, M., Murguia, D., Hitch, M., Lutter, S., Luckeneder, S., Feiel, S. & Moser, P., Jan 2020, In: The Extractive Industries and Society. 7.2020, 1, p. 79-86 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Chicken for Everyone? A cultural political economy of the popularity of chicken meat in Bolivia.

    Kollnig, S., 2020, In: Gastronomica. 2020, 4*Winter, p. 36-48 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Interim Report for the Activities of the First Half Year 2020A | Austrian branch Centre Mining Education UNESCO

    Voica, A., 2020, 30 p.

    Research output: Book/Report › Commissioned report › Research

  85. Published

    Production of multimaterial components by material extrusion - Fused filament fabrication (ME-FFF)

    Kukla, C., Cano, S., Moritz, T., Müller-Köhn, A., Günther, A., Hampel, S. & Holzer, C., 2020, Euro PM 2018 Congress and Exhibition. (Euro PM 2018 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Report for the Activities of the Year 2020

    Voica, A., Trettler, M. & Kucheryavaya, A., 2020, 48 p.

    Research output: Book/Report › Commissioned report › Research

  87. Published

    The ‘good people’ of Cochabamba city: ethnicity and race in Bolivian middle-class food culture

    Kollnig, S., 2020, In: Latin American and Caribbean ethnic studies. 15.2020, 1, p. 23-43 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. 2019
  89. Published

    IAMRRI D2.3 DRAFT ON WEB OF INNOVATION VALUE CHAINS

    Spring, M., Soetanto, D., Martinsuo, M., Luomaranta, T., van de Kaa, G., Sobota, V., Ortt, R., van Beers, C., Hörlesberger, M., Bierwirth, A. & Kriszt, B., 17 Dec 2019, 37 p.

    Research output: Book/Report › Commissioned report › Research

  90. Published

    IAMRRI D2.2 Definitions and Conceptualisations: Intermediary report for project IAMRRI - Webs of innovation and value chains of additive manufacturing under consideration of responsible research and innovation

    van de Kaa, G., Sobota, V., Spring, M., Soetanto, D., Martinsuo, M., Luomaranta, T., Bierwirth, A., Kriszt, B., Nguyen, N. & Jimenez Iturriza, I., 13 Dec 2019

    Research output: Book/Report › Commissioned report › Research

  91. Published

    Weiterbildung nach Maß: Lehrgang „TUSI – Tunnelsicherheit in Bau und Betrieb“

    Löschnauer, J., Galler, R., Wenighofer, R. & Wohltran, N., 2 Dec 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 12, p. 492-496 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Influence of stearic acid in feedstocks for FFF and PIM

    Kukla, C., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 16 Oct 2019.

    Research output: Contribution to conference › Paper › peer-review

  93. Published

    Der Filamentdruck als Verfahren zur Herstellung von metallischen Komponenten

    Kukla, C. & Maurath, J., Oct 2019, In: Galvanotechnik : älteste Fachzeitschrift für die Praxis der Oberflächentechnik. 110.2019, 10, p. 1856-1861 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Steel parts produced by material extrusion additive manufacturing, solvent debinding and sintering

    Gonzalez-Gutierrez, J., Thompson, Y., Cano Cano, S., Felfer, P., Kukla, C. & Holzer, C., 30 Sept 2019, Materials Science and Technology 2019 Conference Proceedings. p. 264-266 3 p. 139-137130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel

    Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C. & Felfer, P., 9 Sept 2019, In: Additive Manufacturing. 30.2019, December, 8 p., 100861.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    ThermoDrill – Development of an alternative drilling technology for deep geothermal applications

    Stoxreiter, T., Rehatschek, K. & Hofstätter, H., 1 Sept 2019, In: World of mining, surface & underground. 71.2019, 5, p. 276-282 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

    Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug 2019, In: International Journal of Refractory Metals and Hard Materials. 82.2019, August, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Fused Filament Fabrication of Metals and Ceramics for Special Applications

    Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug 2019, 9 ed. Leykam Buchverlag. 15 p. (Industrial Management; no. 9)

    Research output: Book/Report › Anthology › Research

  99. Published

    Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

    Kukla, C., Cano Cano, S., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 15 May 2019, In: Powder Metallurgy. 2019, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 9 Apr 2019. 1 p.

    Research output: Contribution to conference › Poster › Research

  101. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Bek, M., Gonzalez-Gutierrez, J., Slemenik Perše, L., Holzer, C. & Kukla, C., 8 Apr 2019, p. 117-117. 1 p.

    Research output: Contribution to conference › Abstract

  102. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Rohstoffe und Bildungsaktivitäten des RIC Leoben

    Haslinger, U. & Meier, A., 1 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 173-177 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Filament-extrusion 3D printing of hardmetal and cermet parts

    Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Kukla, C., 25 Mar 2019, p. 77-78. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  105. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  106. E-pub ahead of print

    MiReBooks - Mixed Reality Lehrbücher für das bergbau Studium

    Bertignoll, H., Labrador Ortega, M., Feiel, S. & Moser, P., 20 Feb 2019, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 178-182 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  107. E-pub ahead of print

    Raw Materials as a Driver of Economic Growth and Job Creation in the Transition to an Innovation-driven Low-carbon and Circular Economy

    Moser, P. & Feiel, S., 19 Feb 2019, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 156-158 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    ThermoDrill - Project Description and Preliminary Results

    Stoxreiter, T. & Rehatschek, K., 15 Feb 2019.

    Research output: Contribution to conference › Presentation › Research

  109. E-pub ahead of print

    Resources Innovation Center an der Montanuniversität Leoben – Ressourcenforschung im Kontext der globalen Entwicklung

    Moser, P. & Feiel, S., 12 Feb 2019, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 159-163 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Fused Filament Fabrication (FFF) of Metal-Ceramic Components

    Abel, J., Scheithauer, U., Janics, T., Hampel, S., Cano Cano, S., Müller-Köhn, A., Günther, A., Kukla, C. & Moritz, T., 11 Jan 2019, In: JoVE. 2019, 143, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Energieschwamm Bruck an der Mur: Projektbericht im Rahmen des Programms Stadt der Zukunft

    Böckl, B., Kriechbaum, L., Kienberger, T., Wohltran, N., Hermann, R., Fritz, M., Rauter, R. & Baumgartner, R., 2019, Wien. 62 p.

    Research output: Book/Report › Commissioned report › Research

  112. Published

    Industrial Chicken Meat and the Good Life in Bolivia

    Kollnig, S., 2019, In Defense of Farmers: The Future of Agriculture in the Shadow of Corporate Power.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  113. Published

    Teaching and learning for critical thinking within interdisciplinary fields

    Kollnig, S., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  114. 2018
  115. Published

    Rheology of Highly Filled Polymers

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 3 Oct 2018, Polymer Rheology. Rivera-Armenta, J. L. & Salazar-Cruz, B. A. (eds.). London, United Kingdom, p. 153- 173 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  116. Published

    Potential of Extrusion Based 3D-printed Hardmetal and Cermet Parts

    Kitzmantel, M., Lengauer, W., Duretek, I., Schwarz , V., Kukla, C., Lieberwirth, C., Morrison, V., Wilfinger, T. & Neubauer, E., 30 Sept 2018, p. 938-945. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  117. Published

    Influence of filler types onto the viscosity of highly filled polymers.

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 19 Sept 2018, International Conference on Polymers and Moulds Innovations: Conference Proceedings. Pontes, A. (ed.). Guimaraes, Portugal, Vol. 8. 6 p. P120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  118. Published

    Metal Mining’s Environmental Pressures: A Review and Updated Estimates on CO2 Emissions,Water Use, and Land Requirements

    Tost, M., Bayer, B., Hitch, M., Lutter, S., Moser, P. & Feiel, S., 14 Aug 2018, In: Sustainability / Molecular Diversity Preservation International (MDPI) . 2018, 10, 14 p., 2881.

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11.2018, 5, 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  120. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  121. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 255 -256 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Highly-filled Polymers for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Holzer, C. & Kukla, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 93-102 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    Simulationsgestützter Vergleich von additiv gefertigten zu konventionellen hochwärmeleitfähigen Formeinsätzen für Spritzgießwerkzeuge

    Berger-Weber, G., Zorn, D., Panzl, G. & Bevc, F., 1 Mar 2018, 2 p. Linz

    Research output: Other contribution › Research

  124. Published

    The state of environmental sustainability considerations in mining

    Tost, M., Hitch, M., Chandurkar, V., Moser, P. & Feiel, S., 7 Feb 2018, In: Journal of Cleaner Production. 2018, 182, p. 969 977 p.

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    Highly filled polymers in production technologies

    Kukla, C., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  126. Published

    The Coloniality of Taste: A political ecology of middle class food practices in a Bolivian city

    Kollnig, S., 2018, Lund, Schweden.

    Research output: Book/Report › Book › Research

  127. 2017
  128. Published

    Special Binder Systems for Metal Powders in Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J., Arbeiter, F., Burkhardt, C., Hampel, S., Kukla, C. & Holzer, C., 14 Dec 2017, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  129. Published

    Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dec 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Vol. 33. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  130. Published

    Isotropic NdFeB hard magnets: MIM production using recycled powders with and without Nd additions

    Burkhardt, C., Weber, O., Podmiljsak, B., Gonzalez-Gutierrez, J., Kukla, C., Degri, M., Harris, I. R. & Walton, A., 1 Dec 2017, In: Powder injection moulding international. 11, 4, p. 75-81 7 p.

    Research output: Contribution to journal › Article › Research

  131. Published

    3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts

    Gonzalez-Gutierrez, J., Godec, D., Guran, R., Spörk, M., Kukla, C. & Holzer, C., 15 Nov 2017, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 57.2018, 1-2, p. 117-120 4 p., 669.15:621.775:669.015:66.049.4:621.385.833=111.

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Feedstocks for metal injection moulding: Effect of particle charcateristics and binder composition on the rheological properties and the morphology of metal injection moulding feedstocks

    Kukla, C. & Gonzalez-Gutierrez, J., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 127 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  133. Published

    Resource Efficient Production of Magnets: Utilization of recycled rare earth magnetic material for the production of magnets with complex structure and geometry via additive manufacturing and metal injection moulding

    Gonzalez-Gutierrez, J. & Kukla, C., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  134. Published

    The production of magnets by FFF - Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Burkhardt, C., Weber, O. & Holzer, C., 1 Oct 2017, Euro PM2017 Congress & Exhibition. Milan, Italy: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    Is it time for a Global Mining Initiative 2.0?

    Tost, M., Chandurkar, V., Hitch, M., Moser, P. & Feiel, S., 28 Jun 2017, Mineral Exploitation and Sustainability - Proceedings of SDIMI 2017. Vol. Vol2. p. 41-47 7 p. (Geo-Resources Environment and Engineering; vol. Vol2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  136. Published

    Development of highly-filled polymer compounds for fused filament fabrication of ceramics and solvent debinding

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Kukla, C. & Holzer, C., 27 Jun 2017.

    Research output: Contribution to conference › Presentation › Research

  137. Published

    SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

    Gonzalez-Gutierrez, J., Godec, D., Kukla, C., Schlauf, T., Burkhardt, C. & Holzer, C., 8 Jun 2017, 16th International Scientific Conference on Production Engineering. Udiljak, T. (ed.). Zadar, Croatia, p. 99 104 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Fused Filament Fabrication (FFF) of PIM Feedstocks

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Hampel, S., Burkhardt, C., Moritz, T. & Holzer, C., 7 Jun 2017, ACTAS DEL VI CONGRESO NACIONAL DE PULVIMETALURGIA Y I CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Herranz, G., Ferrari, B. & Cabrera, J. M. (eds.). Ciudad Real, Spain, Vol. 6. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. Published

    Fused Filament Fabrication for the production of metal and/or ceramic parts and feedstocks therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017, 19th Plansee Seminar. Reutte, Austria: Plansee AG, Vol. 19. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    Fused Filament Fabrication for the Production of Metal and/or Ceramic Parts and Feedstocks Therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  141. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    MOLECULAR DYNAMICS SIMULATIONS AS A TOOL FOR MATERIAL SELECTION IN METAL INJECTION MOULDING FEEDSTOCKS

    Gooneie, A., Gonzalez-Gutierrez, J., Kukla, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Ljubljana, Slovenia, Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    The SDS process: A viable way for the production of metal parts

    Kukla, C., Gonzalez-Gutierrez, J., Hampel, S., Burkhardt, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  144. Published

    Metal Injection Moulding for the Production of Recycled Rare Earth Magnets

    Gonzalez-Gutierrez, J., Walton, A., Schlauf, T., Burkhardt, C., Kukla, C., Krispin, M. & Holzer, C., 20 Apr 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  145. Published

    Rheology of PIM feedstocks

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 9 Feb 2017, In: Metal Powder Report. 72, 1, p. 39-44 6 p.

    Research output: Contribution to journal › Article › Research

  146. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S. & Holzer, C., 2017.

    Research output: Contribution to conference › Paper › peer-review

  147. Published

    Emergence of Differential Social License: A Case of Impact and Benefit Agreements in Nunavut, Canada

    Hitch, M., Tost, M., Moser, P. & Feiel, S., 2017, Proceedings of the 8th International Conference on Sustainable Development in the Minerals Industry.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Testing of clustering algorithms on different 3D seismic models

    Amtmann, J., Eichkitz, C. G., Schreilechner, M. G., Hofer, D., Gegenhuber, N. & Jud, M. F., 2017, 79th EAGE Conference and Exhibition 2017. (79th EAGE Conference and Exhibition 2017).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. 2016
  150. Published

    Landfill Mining: Developing a comprehensive assessment method

    Hermann, R., Wolfsberger, T., Pomberger, R. & Sarc, R., Nov 2016, In: Waste management & research. 34.2016, 11, p. 1157-1163 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    Lanfill Mining: Entwicklung eines gesamtheitlichen Bewertungsverfahrens

    Hermann, R., Pomberger, R. & Wolfsberger, T., Nov 2016, Tagungsband zur 13. Recy & DepoTech-Konferenz. Pomberger, R. (ed.). 1 ed. Leoben, Vol. 13. p. 547 - 554 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  152. Published

    Metal Injection Moulding of NdFeB Based on Recycled Powders

    Imgrund, P., Weber, O., Schlauf, T., Pischang, K., Pickering, L., Walton, A., Gonzalez-Gutierrez, J., Kukla, C. & Burkhardt, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  153. Published

    Properties for PIM Feedstocks Used in Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  154. Published

    Landfill mining - development of a holistic assessment procedure

    Hermann, R., Wolfsberger, T. & Pomberger, R., 19 Sept 2016, ISWA WORLD CONGRESS 2016 - Uniting Ideas For Successful Waste Management. Stanisavljevic, N., Fellner, J., Hossain, S. & Levis, J. W. (eds.). Novi Sad

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Holzer, C., Kukla, C., Duretek, I., Schuschnigg, S. & Gonzalez-Gutierrez, J., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  156. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, p. 299. 1 p.

    Research output: Contribution to conference › Abstract

  157. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France, Vol. 32. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. Published

    Models to Predict the Viscosity of Metal Injection Molding Feedstock Materials as Function of Their Formulation

    Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I. & Holzer, C., 28 May 2016, In: Metals : open access journal . 6.2016, 6, p. 129-146 17 p., 129.

    Research output: Contribution to journal › Article › Research › peer-review

  159. E-pub ahead of print

    Landfill Mining: Development of a cost simulation model

    Wolfsberger, T., Pinkel, M., Polansek, S., Sarc, R., Hermann, R. & Pomberger, R., 8 Feb 2016, (E-pub ahead of print) In: Waste management & research. 34.2016, Issue 4, p. 356-367 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    Holistic assessment of a landfill mining pilot project in Austria: Methodolgy and application

    Hermann, R., Baumgartner, R., Vorbach, S., Wolfsberger, T., Ragossnig, A. & Pomberger, R., 2016, In: Waste management & research. p. 646-657 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  161. Published

    Kritische Rohstoffe in Österreichs Abfällen - Eine unterschätzte Schatzkammer?

    Pfandl, K., Hermann, R. & Kreindl, G., 2016.

    Research output: Contribution to conference › Poster › Research

  162. Published

    Projekt AKRosA2 - Aufbereitung von Kritischen Rohstoffen aus speziellen Abfallströmen

    Pfandl, K., Kreindl, G. & Hermann, R., 2016, Österreiche Abfallwirtschaftstagung 2016: Das Produkt "Abfall". Ö. (ed.).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  163. Published

    Saludos de Bolivia! Grüße aus Bolivien

    Kollnig, S., 2016

    Research output: Other contribution › Research

  164. 2015
  165. Published

    DEVICE FOR MEASURING THE SHEAR STRESS OF A VISCOUS FLUID

    Zurk, A. P. (Inventor) & Kukla, C. (Inventor), 10 Dec 2015, IPC No. G01N 11/ 04 A I, Patent No. WO2015185746, Priority date 5 Jun 2014, Priority No. GB20140010012

    Research output: Patent

  166. Published

    Device for measuring the shear stress of a viscous fluid

    August, P. Z. (Inventor) & Christian, K. (Inventor), 9 Dec 2015, IPC No. G01N 11/ 04 A I, Patent No. GB2526861, Priority date 5 Jun 2014, Priority No. GB20140010012

    Research output: Patent

  167. Published

    método para o controle de um processo de transformação

    Bernhard, H. S. (Inventor), Franz, W. (Inventor), Harald, F. (Inventor), Heinrich, R. M. (Inventor), Johannes, L. S. (Inventor), Kurt, W. (Inventor) & Stefan, S. (Inventor), 27 Oct 2015, IPC No. C21B 5/ 00 A I, Patent No. BRPI0915069, Priority date 7 May 2009, Priority No. WO2009EP55545

    Research output: Patent

  168. Published

    Landfill mining: Development of a theoretical method for a preliminary estimate of the raw material potential of landfill sites

    Wolfsberger, T., Nispel, J., Sarc, R., Aldrian, A., Hermann, R., Höllen, D., Pomberger, R., Budischowsky, A. & Ragossnig, A., 16 Jul 2015, In: Waste management & research. 33, 7, p. 671-680 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    流動性基材で作製される部品の製造を制御するための音響ノイズ感知

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Müller, F. (Inventor) & Rath, G. (Inventor), 26 Mar 2015, IPC No. B29C 45/ 76 A I, Patent No. JP2015509054, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  170. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Muller, F. (Inventor), 29 Jan 2015, IPC No. B29C 45/ 76 A I, Patent No. US2015028507, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  171. Published

    Aqueous solution/metal interfaces investigated in operando by photoelectron spectroscopy

    Karslioʇlu, O., Nemšák, S., Zegkinoglou, I., Shavorskiy, A., Hartl, M., Salmassi, F., Gullikson, E. M., Ng, M. L., Rameshan, C., Rude, B., Bianculli, D., Cordones, A. A., Axnanda, S., Crumlin, E. J., Ross, P. N., Schneider, C. M., Hussain, Z., Liu, Z., Fadley, C. S. & Bluhm, H., 2015, In: Faraday Discussions. 180, p. 35-53 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    Energieschwamm Bruck an der Mur

    Kienberger, T. & Hermann, R., 2015, 2 p.

    Research output: Book/Report › Anthology › Research

  173. Published

    FFG-Leitprojekt: "addmanu.at" Generative Fertigung

    Adacker, C. (Editor), 2015, In: Triple m. 2015, 2, p. 9 1 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  174. Published

    Landfill mining: Resource potential of Austrian landfills – Evaluation and quality assessment of recovered municipal solid waste by chemical analyses

    Wolfsberger, T., Aldrian, A., Sarc, R., Hermann, R., Höllen, D., Budischowsky, A., Zöscher, A., Ragossnig, A. & Pomberger, R., 2015, In: Waste management & research. DOI: 10.1177/0734242X15600051, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Landfill Mining - Strategische Überlegungen für Massenabfalldeponien

    Wolfsberger, T., Pomberger, R., Zöscher, A. & Hermann, R., 2015, Erfahrungsaustausch Deponien 2015: Die Zukunft der Deponien und Baurestmassen. Ö.W. U. A. & V. Ö. E. (eds.). 2015: Österreichischer Wasser- und Abfallwirtschaftsverband, Wien, p. 1 - 11 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  176. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  177. 2014
  178. Published

    MESSUNG VON AKUSTISCHEM RAUSCHEN ZUR STEUERUNG DER HERSTELLUNG EINES BAUTEILS AUS EINEM FLIESSFÄHIGEN GRUNDMATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor), Müller, F. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Müller, F. (Inventor), 3 Dec 2014, IPC No. G01N 29/ 46 A I, Patent No. EP2807011, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  179. Published

    Acoustic noise sensing for controlling manufacture of a component part made of a flowable base material

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 12 Nov 2014, IPC No. B29C 45/ 76 A I, Patent No. CN104144778, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  180. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 8 Oct 2014, IPC No. B29C 45/ 76 A I, Patent No. KR20140119154, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  181. Published

    Landfill-Mining - Potenziale der stofflichen und energetischen Verwertung alter Hausmülldeponien

    Hermann, R., 1 Jul 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  182. Published

    Aktuelle Aktivitäten zu den Europäischen Rohstoffinitiativen

    Maier, A., Moser, P., Eichlseder, W., Mühlburger, M., Brugger, K., Antrekowitsch, H. & Hoscher, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 143-148

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    Feuerfestrecycling

    Strubel, S. & Adacker, C., 2014, In: Triple m. p. 7-7

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    Influence of the process parameters on the replication of microstructured freeform surfaces

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    Investigation of the Influence of Different Coatings on the Filling Behavior and Replication Quality of Microstructures in Injection Molding

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C., Holzer, C., Gruber, D. P., Macher, J. & Pacher, G., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. Published

    Microstructure evolution and grain refinement process in an intermetallic TiAl alloy with high Mi content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  187. Published

    Modelling of Rheological Behaviour of 316L Feedstocks with Different Powder Loadings and Binder Compositions

    Kukla, C., Duretek, I. & Holzer, C., 2014, Proceedings of the EuroPM2014 Conference. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  188. Published

    Tribocompound Polyamide

    Kriszt, B., 2014, Tribologie in der Industrie und Forschung - Symposium 2014. p. 155-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  190. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. 2013
  192. Published

    Acoustic sensing in plastics moulding process

    Rath, G. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor) & Müller, F. (Inventor), 24 Jul 2013, IPC No. B29C 45/ 76 A I, Patent No. GB2498586, Priority date 23 Jan 2012, Priority No. GB20120001067

    Research output: Patent

  193. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  194. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  195. Published

    Adhesion tendency of polymers to hard coatings

    Rebelo De Figueiredo, M., Bergmann, C., Ganser, C., Teichert, C., Kukla, C. & Mitterer, C., 2013, In: International polymer processing. 28, 4, p. 415-420 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Hör auf dein Werkzeug

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, In: Kunststoffe. p. 31-33

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    Measurement of the yield stress of a stainless steel feedstock

    Duretek, I., Kukla, C., Langecker, G. & Holzer, C., 2013, Euro PM2013 Proceedings Volume 1. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  198. Published

    Performance Evaluation of Purely Mechanical Wireless In-Mould Sensor for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, World Academy of Science Engineering and Technology. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  199. Published

    Presentation of a Novel Sensor Based on Acoustic Emission in Injection Molding

    Müller, F., Rath, G., Lucyshyn, T., Kukla, C., Burgsteiner, M. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 127, p. 4744-4749

    Research output: Contribution to journal › Article › Research › peer-review

  200. Published

    Resonant Acoustic Sensor System for the Wireless Monitoring of Injection Moulding

    Müller, F., O'Leary, P., Rath, G., Kukla, C., Harker, M., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the 2nd International Conference on Sensor Networks. p. 153-161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  201. Published

    Rheological behaviour of binder systems for PIM and mixing rules for calculation of viscosity

    Kukla, C., Duretek, I. & Holzer, C., 2013, EuroPM 2013 Proceedings. p. x-x

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  202. Published

    Variotherm Injection Molding Process with BFMold Technology and Electric Heating: Simulation and Experimental Validation

    Pichler, A., Rus, P., Kukla, C., Berger, G., Müller, F., Lucyshyn, T., Pacher, G. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  203. Published

    Wavelet Analysis for Structure-Borne Sound Generating Sensor in Injection Molding

    Rath, G., Müller, F., Kukla, C. & Lu, Z., 2013, 2013 International Conference on Applied Electronics. p. 233-236

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  204. 2012
  205. Published

    A Physical Model for a Quality Control Concept in Injection Molding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 124, p. 4926-4934

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    Aufbereitung in Österreich II - 75 Jahre Prof. Hans Jörg Steiner

    Flachberger, H. (Editor), Kolb, H. (Editor), Cirar, K. (Editor), Hasenhüttl, C. (Editor), Zepic-Soller, U. (Editor) & Waldl, G. (Editor), 2012, Leoben: Eigenverlag. (Aufbereitung in Österreich; vol. II)

    Research output: Book/Report › Book › Research

  207. Published

    Replication of Microstructured Freeform Surface Parts in Injection Molding

    Burgsteiner, M., Müller, F., Wolfberger, A., Lucyshyn, T., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  208. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  209. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  210. Published

    Stakeholder process in the City Bruck an der Mur: Lessons learned in developing a vision and designing an action for a smart city

    Hermann, R., 2012, Stakeholder process in the City Bruck an der Mur: Lessons learned in developing a vision.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  211. Published

    Wireless In-Mold Sensor for Injection Molding: A new Approach

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. 2011
  213. Published

    A new setup for viscosity measurements of fluids as a function of shear rate and pressure

    Gallaun, U., Zurk, A.-P., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society . p. 276-276

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  214. Published

    A physical model for a quality control concept in injection moulding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2011, Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society . p. 251-251

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  215. Published

    Influence of the heat transfer coefficient on the injection molding simulation of microstructures

    Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Conference Proceedings - ICIT & MPT 2011 . p. 141-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. 2009
  217. Published

    Method of controlling a transformation process

    Stefan, S. (Inventor), Spuida, B. H. (Inventor), Wieder, K. (Inventor), Johannes, L. S. (Inventor), Mali, H. R. (Inventor), Kurt, W. (Inventor), Winter, F. (Inventor) & Fischer, H. (Inventor), 10 Dec 2009, IPC No. C21B 5/ 00 A I, Patent No. AU2009254074, Priority date 7 May 2009, Priority No. WO2009EP55545

    Research output: Patent

  218. 2006
  219. Published

    BEG - 5A Aktion Servicewerkstätten/Walzbetriebe

    Löschnauer, J. & Jöbstl, O., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  220. Published

    EMPIRICAL-REPORT - TRIZ IN AUSTRIA FIRST EXPERIENCES WITH THE SUPPORT-TRAINING COURSE

    Jantschgi, J., 2006, MA TRIZ FEST 2006. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  221. Published

    Fostering Sustainability by Linking it with the Innovation Method TRIZ (Theory of Inventive Problem Solving) - Project Experiences

    Jantschgi, J., 2006, Accounting and Cleaner Production. p. 218-221

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  222. Published

    SUPPORT & EUROPEAN SUPPORT

    Jantschgi, J., 2006, Valorisation Conference on „Cross Cultural Business Competences". p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  223. Published

    TRIZ & Technologietransfer

    Jantschgi, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  224. Published

    TRIZ - Innovativer Irrgarten der Werkzeuge?

    Jantschgi, J., 2006, Innovation mit TRIZ. p. 59-72

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  225. Published

    TRIZ to improve material efficiency and energy efficiency of industrial production processes

    Jantschgi, J., 2006, Creativity, Quality and Efficiency - Building an Innovation Culture. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  226. Published

    Usage of Innovation tools to foster the Cooperation of University and Industry

    Jantschgi, J., 2006, Cooperation between the economic, academic and governmental spheres: Mechanisms and levers. p. 97-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  227. 2005
  228. Published

    Project Examples to start and foster Dissemination of TRIZ in Austria

    Jantschgi, J., 2005, MA TRIZ FEST 2005. p. 21-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. Published

    Thermal evolution of an extensional detachment as constrained by organic metamorphic data and thermal modeling: Graz Paleozoic Nappe Complex (Eastern Alps)

    Rantitsch, G., Sachsenhofer, R., Hasenhüttl, C., Russegger, B. & Rainer, T., 2005, In: Tectonophysics. 411, p. 57-72

    Research output: Contribution to journal › Article › Research › peer-review

  230. Published

    Thermal evolution of an extensional detachment as constrained by organic metamorphic data and thermal modeling: Graz Paleozoic Nappe Complex (Eastern Alps)

    Rantitsch, G., Sachsenhofer, R., Hasenhüttl, C., Russegger, B. & Rainer, T., 2005, Mitteilungen der Österreichischen Mineralogischen Gesellschaft 151. p. 105-105

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  231. Published

    Usage of TRIZ Tools in EU Projects to Foster Creativity in the Innovation Process

    Jantschgi, J., 2005, 13th Interdisciplinary Information Management Talks. p. 129-138

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  232. 2004
  233. Published

    Training Course SUPPORT fostering methodical product- abd process- development by combining TRIZ Tools and Sustainable Development

    Jantschgi, J., 2004, TRIZ Future Conference 2004. p. 383-393

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  234. 2002
  235. Published

    SME´s Innotool

    Jantschgi, J., 2002, TRIZ Future Conference 2002. p. 203-210

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 0