Chair of Physical Metallurgy (420)

Organisational unit: Chair

1001 - 1100 out of 2,174Page size: 100

Research output

  1. 2013
  2. Published

    Alloying-related trends from first principles: An application to the Ti-Al-X-N system

    Holec, D., Zhou, L., Rachbauer, R. & Mayrhofer, P. H., 2013, In: Journal of applied physics. 113, p. 113510-1-113510-8

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a beta-phase containing TiAl alloy

    Schmölzer, T., Liss, K.-D., Kirchlechner, C., Mayer, S., Stark, A., Peel, M. & Clemens, H., 2013, In: Intermetallics. 39, p. 25-33

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Anormales Kornwachstum im HS 6-5-2-5

    Martinschitz, C., 2013

    Research output: Thesis › Diploma Thesis

  5. Published

    Approach for the simulation of hydrogen diffusion in cold-worked high-strength multiphase steels in combination with experimental procedure

    Bergmann, C., 2013, 65 p.

    Research output: Thesis › Diploma Thesis

  6. Published

    Atomistic insights into milling mechanisms in an fe-Y2O3 model alloy

    Ressel, G., Holec, D., Fian, A., Mendez Martin, F. & Leitner, H., 2013, In: Applied physics / A (Series A, Materials science & processing).

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Atom probe study of vanadium interphase precipitates and randomly distributed vanadium precipitates in ferrite

    Nöhrer, M., Zamberger, S., Primig, S. & Leitner, H., 2013, In: Micron. 54-55, p. 57-64

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Characterization of closely crystallographically related phases in gamma-TiAl alloys by HEXRD and TEM imaging

    Gabrisch, H., Mayer, S., Pyczak, F., Rackel, M., Lorenz, U., Schell, N., Schreyer, A. & Stark, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Charakterisierung der Legierung EN-AW 6016 hinsichtlich mikrostruktureller Einflüsse auf die mechanischen Eigenschaften und das Korrosionsverhalten

    Schneider, C. P., 2013

    Research output: Thesis › Diploma Thesis

  10. Published

    Charaktersierung des Rissinitierung- und Rissfortschrittverhaltens von Schweißverbindungen hochfester Baustähle mittels Replika-Technik

    Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2013, Prakt. Met. Sonderband 45. p. 127-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Comparison the carbon distribution in continuously and conventionally hardened martensite in a 42CrMo4

    Sackl, S. C., Zuber, M., Primig, S. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Critical thickness for GaN thin film on AlN substrate

    Coppeta, R. A., Ceric, H., Holec, D. & Grasser, T., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Critical thickness for GaN thin film on AlN substrate

    Coppeta, R. A., Ceric, H., Holec, D. & Grasser, T., 2013, Integrated Reliability Workshop Final Report (IRW), 2013 IEEE International. p. 133-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Design, processing, microstructure, properties and applications of advanced intermetallic TiAl alloys

    Clemens, H. & Mayer, S., 2013, In: Advanced engineering materials. 15, p. 191-215

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001)

    Mühlbacher, M., Sartory, B., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Diffusive and massive phase transformations in Ti-Al-Nb alloys - Modelling and experiments

    Gamsjäger, E., Liu, Y., Rester, M., Puschnig, P., Draxl, C., Clemens, H., Dehm, G. & Fischer, F. D., 2013, In: Intermetallics. 38, p. 126-138

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Direct or indirect: Influence of type of retained austenite decomposition during tempering on the toughness of a hot-work tool steel

    Lerchbacher, C., Zinner, S. & Leitner, H., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 564, p. 163-168

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Eigenschaftscharakterisierung von Warmarbeitsstählen für Strukturbauteile

    Aigner, A., 2013, 53 p.

    Research output: Thesis › Diploma Thesis

  20. Published

    Einfluss von Aluminium auf das Nitrieren von Schnellarbeitsstählen

    Sackl, S. C., Kellezi, G. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Einfluss von Aluminium auf die tribologischen Eigenschaften von Schnellarbeitsstählen

    Jonke, M., 2013

    Research output: Thesis › Diploma Thesis

  22. Published

    Einfluss von Niob auf die Karbidausbildung im K490 PM

    Kaiser, S., 2013, 82 p.

    Research output: Thesis › Diploma Thesis

  23. Published

    Elastic constants and critical thicknesses of ScGaN and ScAlN

    Zhang, S., Fu, W. Y., Holec, D., Humphreys, C. J. & Moram, M. A., 2013, In: Journal of applied physics. 114, p. 2435161-243516-6

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Elastoplastic Buckling as Source of Misinterpretation of Micropillar-Tests

    Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D. & Rammerstorfer, F. G., 2013, In: Acta materialia. 61, p. 4996-5007

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Evolution of the omega-phase and its effect on the hardness of the beta-phase in Ti-44Al-4Nb-1Mo alloys

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    First investigations on a TNM TiAl alloy processed by spark plasma sintering

    Voisin, T., Monchoux, J.-P., Clemens, H. & Couret, A., 2013, First investigations on a TNM TiAl alloy processed by spark plasma sintering. Materials Research Society : MRS, p. 17-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    First-principles study of elastic properties of cubic Cr1-xAlxN alloys

    Zhou, L., Holec, D. & Mayrhofer, P. H., 2013, In: Journal of applied physics. 113, p. 043511-1-043511-8

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Focused ion beam sample preparation of mechanically alloyed iron powders for Atom Probe Tomography

    Mendez Martin, F., Ressel, G. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Gefüge und Eigenschaften der intermetallischen TNM-Legierung

    Schloffer, M., 2013

    Research output: Thesis › Doctoral Thesis

  30. Published

    Gefüge und Eigenschaften einer mehrphasigen intermetallischen Titanaluminidlegierung für innovative Leichtbauanwendungen

    Gaitzenauer, A., Schenk, M., Kuchling, W., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 113-117

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Grain boundary segregations in technically pure molybdenum

    Babinsky, K., Primig, S., Knabl, W., Lorich, A., Weingärtner, T., Weidow, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Grain boundary segregations in technically pure molybdenum

    Leitner, K., 2013

    Research output: Thesis › Diploma Thesis

  33. Published

    High temperature oxidation protection of multi-phase Mo-containing TiAl-alloys by the fluorine effect

    Donchev, A., Pflumm, R., Mayer, S., Clemens, H. & Schütze, M., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Influence of the thermal route on the peak-aged microstructures in an Al-Mg-Si aluminum alloy

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Sologubenko, A. S. & Uggowitzer, P. J., 2013, In: Scripta materialia. 68, p. 158-161

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of welding parameters on the fatigue behaviour of high strength steels

    Horn, A., Panzenböck, M., Clemens, H. & Posch, G., 2013, In: Materialwissenschaft und Werkstofftechnik. 44, p. 889-896

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    In situ high-energy XRD study of the hot-deformation behavior of a novel gamma-TiAl alloy

    Stark, A., Schwaighofer, E., Mayer, S., Clemens, H., Lippmann, T., Lottermoser, L., Schreyer, A. & Pyczak, F., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 71-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Interfacial and inter- diffusion studies of epitaxial TiN/Cu layers on MgO (001) - A comprehensive approach by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Keckes, J., Lu, J., Lars, H. & Mitterer, C., 2013.

    Research output: Contribution to conference › Presentation › Research › peer-review

  38. Published

    Kurzzeitkriechverhalten intermetallischer TNM Titanaluminid-Legierungen

    Kastenhuber, M., 2013

    Research output: Thesis › Diploma Thesis

  39. Published

    Magnetic field strength influence on the reactive magnetron sputter deposition of Ta2O5

    Hollerweger, R., Holec, D., Paultisch, J., Rachbauer, R., Polcik, P. & Mayrhofer, P. H., 2013, In: Journal of physics / D, Applied physics. 46, p. 335203-335210

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Metallographic characterization of the molybdenum based alloy MHC by a color etching technique

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Materials characterization. 77, p. 63-69

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Microstructure – Property Relationship in a Near Net Shape Forged γ-TiAl Based Alloy

    Gaitzenauer, A., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Microstructure-strength correlation of Mo-Hf and Mo-Hf-C alloys

    Pöhl, C., 2013, 120 p.

    Research output: Thesis › Doctoral Thesis

  43. Published

    Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2013, Recrystallization and Grain Growth V. Trans Tech Publications, p. 353-356 4 p. (Materials Science Forum; vol. 753).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Nanomechanics of Carbon Nanotubes

    Sun, Y. W., Dunstan, D. J., Hartmann, M. & Holec, D., 2013, PAMM - Proceedings in Applied Mathematics and Mechanics. p. 7-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Nanomechanics of Carbon Nanotubes

    Sun, Y. W., Dunstan, D. J., Hartmann, M. & Holec, D., 2013, In: Proceedings in applied mathematics and mechanics. 13, p. 7-10

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Near conventional forging of an advanced TiAl alloy

    Huber, D., Clemens, H. & Stockinger, M., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 23-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    On the precipitation mechanism in the molybdenum based alloy MHC

    Lang, D., Pöhl, C., Schatte, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    On the precipitation of Hf-rich carbides in the molybdenum base alloy MHC

    Lang, D., Pöhl, C., Schatte, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Optimized Hot-forming of an Intermetallic Multi-phase gamma-TiAl based alloy

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 29-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Phase characterization of multi-phase advanced high strength steels

    Hofer, C., Primig, S., Pichler, A., Krammerbauer, J. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings

    Riedl, H., Holec, D., Rachbauer, R., Polcik, P., Hollerweger, R., Paulitsch, J. & Mayrhofer, P. H., 2013, In: Surface & coatings technology. 235, p. 174-180

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N thin films

    Riedl, H., Hollerweger, R., Holec, D., Rachbauer, R., Polcik, P. H., Paulitsch, J. & Mayrhofer, P. H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Phase transformations and grain growth in TNM based alloys

    Klein, T., 2013

    Research output: Thesis › Diploma Thesis

  55. Published

    Precipitation behavior of different micro-alloyed 0.2 wt% C steels

    Nöhrer, M., 2013, 113 p.

    Research output: Thesis › Doctoral Thesis

  56. Published

    Relaxation processes at high temperatures in an TiAl-Nb-Mo intermetallics

    Simas, P., Schmölzer, T., Mayer, S., No, M. L., Clemens, H. & Juan, J. S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 41-46

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Schwingfestigkeitsverhalten von Edelstählen in Wasser

    Borchert, M., 2013, 76 p.

    Research output: Thesis › Diploma Thesis

  58. Published

    Solid solution hardening of molybdenum-hafnium alloys: Experiments and Modeling

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 559, p. 643-650

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Solid solution softening of polycrystalline molybdenum-hafnium alloys

    Pöhl, C., Schatte, J. & Leitner, H., 2013, In: Journal of alloys and compounds. 576, p. 250-256

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Stabilization criteria for cubic AlN in TiN/AlN and CrN/AlN bi-layer systems

    Chawla, V., Holec, D. & Mayrhofer, P. H., 2013, In: Journal of physics / D, Applied physics. 46, p. 045305-1-045305-8

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Strain induced decomposition and precipitation of carbides in a molybdenum-hafnium-carbon alloy

    Pöhl, C., Lang, D., Schatte, J. & Leitner, H., 2013, In: Journal of alloys and compounds. 579, p. 422-431

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    The Effect of Cooling Rate on the Microstructure and its Influence on Toughness of two Types of Tool Steels Studied by High Resolution Techniques

    Lerchbacher, C., 2013

    Research output: Thesis › Doctoral Thesis

  63. Published

    The evolution of Y distribution during the processing route of mechnically alloyed iron studied by means of atom probe tomography

    Ressel, G., Primig, S. & Leitner, H., 2013, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 104, p. 1088-1095

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Thermodynamic calculations of phase equilibria and phase fractions of a beta-solidifying TiAl alloy using the CHALPAD approach

    Werner, R., Schloffer, M., Schwaighofer, E., Clemens, H. & Mayer, S., 2013, Materials Research Society symposium proceedings Volume 1516. Materials Research Society : MRS, p. 59-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Tunable optoelectronic and ferroelectric properties in Sc-based III-nitrides

    Zhang, S., Holec, D., Fu, W. Y., Humphreys, C. J. & Moram, M. A., 2013, In: Journal of applied physics. 114, p. 133510-1-133510-11

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Untersuchung des Umwandlungsverhaltens von Advanced High Strength Steels beim Galvannealing

    Suppan, C., 2013, 65 p.

    Research output: Thesis › Diploma Thesis

  67. Published

    Verbesserung der Zähigkeit von Werkzeugstählen durch Ausnutzen gezielter Festphasenumwandlungen

    Keplinger, A., 2013

    Research output: Thesis › Diploma Thesis

  68. 2012
  69. Published

    Modelling the micromorphology of heat treated Ti6Al4V forgings by means of spatial tessellations feasible for FEM analyses of microscale residual stresses

    Regener, B., Krempaszky, C., Werner, E. & Stockinger, M., Feb 2012, In: Computational materials science. 52, 1, p. 77-81 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    58. Metallkunde-Kolloquium - Abstractband

    Mitterer, C. (Editor), Clemens, H. (Editor) & Kneißl, A. (Editor), 2012, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  71. Published

    Abnormal grain growth in high-speed steels

    Schemmel, I., Martinschitz, C., Leitner, H. & Kellezi, G., 2012, Proceedings of the 9th International Tooling Conference. p. 81-87

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    A finite element model for carburisation of surface densified PM components

    Eck, S., Ishmurzin, A., Wlanis, T., Ebner, R., Hatzenbichler, T. & Planitzer, F., 2012, In: International journal of computational materials science and surface engineering. 5, 1, p. 16-30

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Atom probe study of the carbon distribution in a hardened martensitic hot-work tool steel X38CrMoV5-1

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, In: Micron. 43, p. 818-826

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Ausscheidungsverhalten der Ni-Basis-Superlegierung 718

    Turk, C., 2012

    Research output: Thesis › Diploma Thesis

  75. Published

    Basischarakterisierung der β-erstarrenden TNM™-Legierung für die Anwendung als Turbinenrad im Turbolader

    Müller, M., 2012

    Research output: Thesis › Diploma Thesis

  76. Published

    Carbon distribution and its influence on toughness in a hot-work tool steel X38CrMoV5-1

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Carbon Distribution and the influence on the tempering behaviour in a hot work tool steel aisi H11

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, Advanced Materials Research Vol. 409 / THERMEC 2011 Supplement. p. 702-706

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Characterization of the precipitation mechanism in the molybdenum based alloy MHC

    Lang, D., 2012, 105 p.

    Research output: Thesis › Diploma Thesis › peer-review

  79. Published

    Charakterisierung einer β-erstarrenden γ-Titanaluminid Basislegierung für Strahltriebwerksanwendungen

    Wallgram, W., 2012

    Research output: Thesis › Diploma Thesis

  80. Published

    Computer-aided modelling ranging from quantum, via atomistic to continuum level is used to support and interpret experimental observations, as well as to explore new basic-research areas

    Holec, D., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Determination of the mechanism of restoration in subtransus hot deformation of Ti-6Al-4V

    Warchomicka, F., Poletti, C., Stockinger, M. & Degischer, H. P., 2012, THERMEC 2011. Trans Tech Publications, p. 252-257 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Dynamic phase evolution in titanium alloy Ti-6A1-4V

    Homporová, P., Poletti, C., Stockinger, M. & Warchomicka, F., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 737-740 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Effect of Hf on structure and age hardening of Ti-Al-N thin films

    Rachbauer, R., Blutmager, A., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2667-2672

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Eigenschaftsoptimiertes Warmumformen einer intermetallischen Titanaluminid-Legierung

    Gaitzenauer, A., Müller, M., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 319-322

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Einfluss der Mikrolegierungselemente Niob und Vanadium auf den Vergütungsstahl 42CrMo4

    Moisi, D., 2012

    Research output: Thesis › Diploma Thesis

  86. Published

    Einfluss von Aluminium auf das Nitrieren von Schnellarbeitsstählen

    Sackl, S. C., 2012

    Research output: Thesis › Diploma Thesis

  87. Published

    Evolution of beta grain size during beta phase processing of Ti-6A1-4V

    Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 493-496 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    FEM-optimized thermomechanical processing of titanium alloy blades for steam turbines

    Stockinger, M., Zechner, W., Krenn, G. & Weber, G., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 298-301 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    FE2 scheme for simulation of thermo-mechanically induced phase transformations and residual stresses in Ti6A14V components

    Regener, B., Krempaszky, C., Werner, E. & Stockinger, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 632-636 5 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    First-principles study of the thermodynamic and elastic properties of eutectic Fe-Ti alloys

    Zhu, L.-F., Friák, M., Dick, A., Grabowski, B., Hickel, T., Liot, F., Holec, D., Schlieter, A., Kühn, U., Eckert, J., Ebrahimi, Z., Emmerich, H. & Neugebauer, J., 2012, In: Acta materialia. 60, p. 1594-1602

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Herstellung und Eigenschaften von hochfesten, vergüteten Grobblechen

    Egger, R., Grill, R. & Clemens, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 332-339

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Herstellung von hochfesten Grobblechen – Einfluss von Legierungselementen und Prozessbedingungen auf das Eigenschaftsprofil

    Egger, R., 2012, 163 p.

    Research output: Thesis › Doctoral Thesis

  93. Published

    Hochverformung von intermetallischen γ-Titanaluminiden

    Eidenberger, E., 2012

    Research output: Thesis › Diploma Thesis

  94. Published

    Hot Deformation of Cast and Extruded TiAl: An In-situ Diffraction Study

    Schmölzer, T., Liss, K.-D., Mayer, S., Yan, K., Reid, M., Dippenaar, R., Peel, M. & Clemens, H., 2012,

    Proceedings of International Conference of Processing & Manufacturing of Advanced Materials

    .     p. 1725-1730

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Increased thermal stability of Ti-Al-N thin films by Ta alloying

    Rachbauer, R., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 211, p. 98-103

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Influence of heat treatments on the microstructure of a multi-phase titanium aluminide alloy

    Schwaighofer, E., Schloffer, M., Schmölzer, T., Mayer, S., Lindemann, J., Guether, V., Klose, J. & Clemens, H., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 124-137

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Influence of proton irradiation on the precipitation kinetics and mechanical properties of intermetallic precipitation-hardened steel

    Hofer, C., 2012, 62 p.

    Research output: Thesis › Diploma Thesis › peer-review

  98. Published

    Influence of temperature and strain rate on dynamic softening processes in Allvac® 718Plus™

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 2012, THERMEC 2011. Trans Tech Publications, p. 2440-2445 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Influence of tempering temperature on the corrosion behaviour of plastic mould steels X38CrMo16

    Lerchbacher, C., Zinner, S. & Leitner, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 414-419

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Influence of the heating rate on the recrystallization behavior of molybdenum

    Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 535, p. 316-324

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    In situ forging experiments at HARWI II with advanced TiAl alloys: HASYLAB Annual Report

    Stark, A., Schwaighofer, E., Mayer, S., Lottermoser, L., Lippmann, T., Oehring, M., Clemens, H., Pyczak, F. & Schreyer, A., 2012

    Research output: Non-textual form › Web publication/site › Research

  102. Published

    In Situ Study of Gamma-TiAl Lamellae Formation in Supersaturated alpha 2-Ti3Al Grains

    Cha, L., Schmölzer, T., Zhang, Z., Mayer, S., Clemens, H., Staron, P. & Dehm, G., 2012, In: Advanced engineering materials. 14, p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...7 8 9 10 11 12 13 14 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben