Chair of Mechanical Engineering (140)

Organisational unit: Chair

501 - 600 out of 1,376Page size: 100

Research output

  1. 2016
  2. Published

    Crack growth in 1:3 scale specimens - experiments and modelling

    Simunek, D., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Crack propagation analysis and rehabilitation by HFMI of pre-fatigued welded structures

    Leitner, M., Barsoum, Z. & Schäfers, F., 2016, In: Welding in the world.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Die Auswirkung von gussrauen Oberflächen auf die Schwingfestigkeit von gegossenem Aluminium im Automobilbau

    Aigner, M., 2016

    Research output: Thesis › Master's Thesis

  5. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, Proceedings of the ICMFM18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Effect of weld defects on the fatigue strength of ultra high-strength steels

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 2016, In: Procedia Engineering. 160, p. 214-222

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Einfluss der Vorverfestigung auf statisches und zyklisches Kriechverhalten von Ti-6Al-4V

    Koch, M., 2016

    Research output: Thesis › Master's Thesis

  8. Published

    Einflüsse auf die Schwingfestigkeit eines hochfesten Stahls bei Schwingspielzahlen größer 1E7

    Seisenbacher, B., 2016, 120 p.

    Research output: Thesis › Master's Thesis

  9. Published

    Einfluss von Überlasten auf die Langzeitfestigkeit

    Theil, N., 2016

    Research output: Thesis › Doctoral Thesis

  10. Published

    Einfluss von verschleißreduzierenden Hartschichten auf das Schwingfestigkeitsverhalten

    Steinwender, F., 2016

    Research output: Thesis › Master's Thesis

  11. Published

    Entstehungsmechanismen von Zinkspitzen beim Widerstandspunktschweißen an feuerverzinkten Stahlfeinblechen

    Hofmann, P., 2016

    Research output: Thesis › Diploma Thesis

  12. Published

    Entwicklung einer Programmierung zur Durchführung von statischen und dynamischen Torsionsprüfungen

    Oberhofer, F., 2016

    Research output: Thesis › Master's Thesis

  13. Published

    Entwicklung eines Prüfstandes zur Charakterisierung der Betriebsfestigkeit unter multiaxialer Beanspruchung

    Schuscha, M., 2016

    Research output: Thesis › Diploma Thesis

  14. Published

    Experimental evaluation of cutting forces for chipping process and developement of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, CD-ROM Proceedings of the World Conference on Timber Engineering: WCTE 2016. Eberhardsteiner, J., Winter, W., Fadai, A. & Pöll, M. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Experimental evaluation of cutting forces for chipping process and developement of wood material model

    Pichler, P., 2016. 8 p.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Experimental evaluation of cutting forces for chipping process and development of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, WCTE 2016 - World Conference on Timber Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Fatigue strength of fillet welded specimens focussing on angular distortion: XIII-2634-16

    Ottersböck, M. (Co-editor), Leitner, M. & Stoschka, M. (Co-editor), 2016.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    High temperature abrasion in sinter plants and their cost efficient wear protection

    Varga, M., 2016

    Research output: Thesis › Doctoral Thesis

  20. Published

    Influence of size effect and stress gradient on the high-cycle fatigue strength of a 1.4542 steel

    Milosevic, I., Winter, G., Grun, F. & Kober, M., 2016, In: Procedia Engineering. 160, p. 61-68

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Influence of Size Effect and Stress Gradient on the High-cycle Fatigue Strength of a 1.4542 Steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 2016, In: Procedia Engineering. 160, p. 61-68

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Influence of Size Effect and Stress Gradient on the High-cycle Fatigue Strength of a 1.4542 Steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 2016, p. 61-68.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    Influence of the levelling process on the mechanical properties of heavy steel plates

    Kaltenbrunner, T., Antretter, T., Ecker, W., Kaiser, R., Gänser, H.-P. & Parteder, E., 2016, Proceedings of Rolling '16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Mechanical post-treatment of induction-hardened surface layers to optimize fatigue strength of crankshafts

    Leitner, M., Tuncali, Z., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Mechanische und Thermomechanische Ermüdungseigenschaften von wärmebehandelten Aluminium-Silizium Gusslegierungen

    Huter, P., 2016

    Research output: Thesis › Doctoral Thesis

  26. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Bergmann, P., Grün, F., Godor, I. & Herbst, K., 2016, In: Design of Machines and Structures. 6, 1, p. 5-14 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Modeling Wear of Journal Bearings

    Bergmann, P. & Grün, F., 2016. 6 p.

    Research output: Contribution to conference › Paper

  28. Published

    Modeling Wear of Journal Bearings

    Bergmann, P. & Grün, F., 2016.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Multiaxial fatigue assessment of crankshafts by local stress and critical plane approach

    Leitner, M., Grün, F., Tuncali, Z., Steiner, R. & Chen, W., 2016, In: Frattura ed Integrità Strutturale .

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016, 11th International Conference on Multiaxial Fatigue & Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Neuentwicklung einer optimierten Hacktrommel von schnelllaufenden Holzzerkleinerern

    Gschliesser, U., 2016

    Research output: Thesis › Master's Thesis

  33. Published

    Numerische Simulation induktiver Bauteilerwärmung komplexer Geometrien

    Renhart, P., 2016, 111 p.

    Research output: Thesis › Diploma Thesis

  34. Published

    Numerische und versuchstechnische Bewertung von tribologischen Kontakten

    Stadler, G., 2016

    Research output: Thesis › Master's Thesis

  35. Published

    Reibungsreduktion ins hochbelasteten, geschmierten Kontatken durch Kugelstrahlen

    Moder, J. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Simulation des Kugelstrahlens zur prozessbasierten Bauteilauslegung

    Messner, M., 2016

    Research output: Thesis › Diploma Thesis

  37. Published

    SIMULATIVE INVESTIGATIONS OF HIGHLY LOADED CONTACTS CONSIDERING SURFACE ROUGHNESS

    Moder, J. & Grün, F., 2016, Tagungsband ÖTG Symposium 2016.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 2016, Proceedings des DVM Arbeitskreises Zuverlässigkeit tribologischer Systeme. p. 1-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Stability of HFMI-treatment induced residual stresses during fatigue

    Leitner, M., Khurshid, M. & Barsoum, Z., 2016.

    Research output: Contribution to conference › Presentation › Research

  40. Published

    Stability of HFMI-treatment induced residual stresses during fatigue

    Leitner, M., Khurshid, M. & Barsoum, Z., 2016.

    Research output: Contribution to conference › Paper

  41. Published

    Tribometric assessment towards functionality of current and future journal bearing systems

    Summer, F., 2016

    Research output: Thesis › Doctoral Thesis

  42. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, WCCM XII & APCOM VI. p. 1220 1224 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, p. 1220. 1224 p.

    Research output: Contribution to conference › Presentation › Research

  44. Published

    Wear detection by acoustic emissions

    Bergmann, P., Grün, F. & Stadler, G., 2016, Tribologie in Industrie und Forschung: Vortragsunterlagen. Franek, F., Pauschitz, A. & Badisch, E. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Wear detection by acoustic emissions

    Bergmann, P., Grün, F. & Stadler, G., 2016.

    Research output: Contribution to conference › Presentation › Research

  46. 2015
  47. Published

    Fatigue Strength of HFMI-treated and Stress-relief Annealed High-strength Steel Weld Joints: Fatigue Design 2015, International Conference Proceedings, 6th Edition

    Leitner, M., Gerstbrein, S., Ottersböck, M. & Stoschka, M., 31 Dec 2015, In: Procedia Engineering. 133, p. 477-484 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Jahresendbericht_2015

    Primetzhofer, A., 31 Dec 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Thermo-Mechanical Finite Element Simulation and Fatigue Life Assessment of a Copper Mould for Continuous Casting of Steel: Fatigue Design 2015, International Conference Proceedings, 6th Edition

    Srnec Novak, J., Benasciutti, D., De Bona, F., Stanojevic, A. & Huter, P., 29 Dec 2015, In: Procedia Engineering. 133, p. 688–697

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Zwischenbericht Quasistatische, HCF und TMF Versuche an zwei Al-Werkstoffen

    Huter, P., 10 Dec 2015, 15 p.

    Research output: Book/Report › Commissioned report › Research

  51. Published

    Schwingfestigkeit ultrahochfester Schweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 30 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Fatigue crack growth under constant and variable amplitude loading at semi-elliptical and V-notched steel specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 18 Nov 2015, p. 348-361.

    Research output: Contribution to conference › Presentation › Research › peer-review

  53. Published

    START-STOP OPERATION AS INFLUENCE FACTOR ON PLAIN BEARING LIFETIME

    Summer, F., Grün, F., Offenbecher, M. & Lainé, E., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  54. Published

    International Conference on Materials, Processing and Product Engineering: Thermal Stability of Residual Stresses in Ti-6Al-4V components

    Stanojevic, A., Oberwinkler, B. & Angerer, P., 3 Nov 2015, p. 69. 69 p.

    Research output: Contribution to conference › Abstract › peer-review

  55. Published

    International Conference on Materials, Processing and Product Engineering: Estimation of Material Parameters in Nonlinear Hardening Plasticity Models and Strain Life Curves for CuAg Alloy

    Stanojevic, A., Srnec Novak, J., Benasciutti, D., De Bona, F., De Luca, A. & Raffaglio, Y., 3 Nov 2015, p. 68. 68 p.

    Research output: Contribution to conference › Abstract › peer-review

  56. Published

    Effect of post-weld heat treatment on the fatigue strength of HFMI-treated mild steel joints

    Leitner, M., Mössler, W., Putz, A. & Stoschka, M., 1 Nov 2015, In: Welding in the world. 59, 6, p. 861-873 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Quantifizierung der ermüdungsrelevanten Mikroporengrößen mittels CT-Analyse an Aluminium Gussbauteilen

    Garb, C., Kainzinger, P. & Tauscher, M., 8 Oct 2015, Bericht 142, Betriebsfestigkeits - Bauteile und Systeme unter komplexer Belastung, 42. Tagung des Arbeitskreises Betriebsfestigkeit. p. 313 - 322 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Accepted/In press

    Effect of local stress state on fatigue strength of welded T-joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 27 Sept 2015, (Accepted/In press) Mathematical Modelling of Weld Phenomena 11. p. 1-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    CHARACTERISATION OF SEVERAL LUBRICANTS IN CASE OF DIE FORGING OF ALUMINIUM ALLOYS BY THE RING COMPRESSION TEST

    Milosevic, I. & Hatzenbichler, T., 22 Sept 2015, 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Concept of Fatigue Design Methodology for short fibre reinforced Polymers considering Environmental Conditions

    Primetzhofer, A., Pinter, G., Mösenbacher, A. & Haslinger, T., 22 Sept 2015.

    Research output: Contribution to conference › Paper

  61. Published

    The 13th World Conference on Titanium 2015: Stability of Residual Stresses in Ti-6Al-4V Components due to Mechanical Loads

    Stanojevic, A., Maderbacher, H., Oberwinkler, B. & Angerer, P., 16 Aug 2015.

    Research output: Contribution to conference › Abstract › peer-review

  62. Published

    Final report-HCF and TMF tests on specimens of an aluminium cast material

    Huter, P., 14 Aug 2015

    Research output: Book/Report › Commissioned report › Research

  63. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Pinter, G. & Mösenbacher, A., 24 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  64. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 24 Jul 2015. 10 p.

    Research output: Contribution to conference › Paper

  65. Published

    Tribological study of crankshaft bearing systems: Comparison of forged steel and cast iron counterparts under start–stop operation

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 8 Jul 2015, In: Wear. 338-339, p. 232-241

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Fatigue strength of welded ultra high-strength steel joints

    Ottersböck, M., Leitner, M., Stoschka, M. & Maurer, W., 3 Jul 2015.

    Research output: Contribution to conference › Paper

  67. Published

    HCF and TMF tests on specimens of an aluminium cast material (sampling position cylinder head – combustion chamber)

    Huter, P., 1 Jul 2015, 12 p.

    Research output: Book/Report › Commissioned report › Research

  68. Published

    Effect of loading type on welded and HFMI-treated T-joints: XIII-2584-15

    Ottersböck, M., Leitner, M. & Stoschka, M., 29 Jun 2015.

    Research output: Contribution to conference › Paper

  69. Published

    Application of local approaches to assess the fatigue crack: XIII-WG3-36-15

    Stoschka, M., Leitner, M. & Ottersböck, M., 28 Jun 2015. 18 p.

    Research output: Contribution to conference › Presentation › Research

  70. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  71. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015, 10th International FEMFAT User Meeting 2015 HANDOUT: Ligthweight Design and New Materials. Steyr, 28 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Simulative Investigations of a Close-to-Component Journal Bearing System and Comparison with Test Data

    Bergmann, P., Grün, F., Godor, I. & Hager, G., 5 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  73. Published

    Tribometric assessment of start stop journal bearing wear with the aid of a component close test methodology

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 3 Jun 2015, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    12th International Conference on the Mechanical Behavior on of Materials: Thermal Stability of Residual Streses in Ti-6Al-4V components

    Stanojevic, A., Maderbacher, H., Angerer, P. & Oberwinkler, B., 10 May 2015.

    Research output: Contribution to conference › Abstract

  75. Published

    Influence of Manufacturing Technology on the Loadability of Gear Systems

    Grün, F., Godor, I. & Dietrich, A., 17 Apr 2015, Proceedings of the European All-Wheel Drive Congress 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Material fatigue models and design methodology for short fibre reinforced polymers based on damage accumulation hypothesis

    Pinter, G., Mösenbacher, A., Maier, J., Primetzhofer, A. & Guster, C., 31 Mar 2015, Proceedings 16th International Conference on Deformation Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Quartalsreviewbericht_Q1-2015

    Primetzhofer, A., 30 Mar 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Quartalsreviewbericht_Q2-2015

    Primetzhofer, A., 30 Mar 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Quartalsreviewbericht_Q3-2015

    Primetzhofer, A., 30 Mar 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Quartalsreviewbericht_Q4-2015

    Primetzhofer, A., 30 Mar 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Hyperworks applicaton examples regarding structural steel lightweight design

    Stoschka, M., 20 Mar 2015. 37 p.

    Research output: Contribution to conference › Presentation › Transfer

  82. Published

    Study of the support effect of welded high-strength steel joints

    Ottersböck, M., Leitner, M. & Stoschka, M., 5 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  83. Published

    Stützwirkungseffekt bei der Ermüdungsfestigkeit hochfester Stahlschweißverbindungen

    Ottersböck, M., Leitner, M. & Stoschka, M., 12 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  84. Published

    Damage prediction for un-coated and coated aluminum alloys under thermal and mechanical fatigue loadings based on a modified plastic strain energy approach: Lightweight Materials and Structural Solutions for Transport Applications

    Azadi, M., Farrahi, G. H., Winter, G., Huter, P. & Eichlseder, W., 5 Feb 2015, In: Materials and Design. 66, 5, p. 587 595 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Analysemodell zur Bewertung von Potenzial und effektiver Nutzung von Strukturbauteilen aus faserverstärkten Kunststoffen hinsichtlich Steifigkeit und Festigkeit

    Lembeck, A., 2015

    Research output: Thesis › Diploma Thesis

  86. Published

    Application studies for the fatigue strength improvement of welded structures by high-frequency mechanical impact (HFMI) treatment

    Yildirim, H. C., Leitner, M., Marquis, G. B., Stoschka, M. & Barsoum, Z., 2015.

    Research output: Contribution to conference › Presentation › Research

  87. Published

    Beitrag zur Schwingfestigkeit von HFMI-behandelten Proben und Diskussion lokaler Ansätze zur Bauteilauslegung

    Stoschka, M. & Leitner, M., 2015. 19 p.

    Research output: Contribution to conference › Presentation › Research

  88. Published

    Contact Fatigue Life Investigation and Wear Mechanisms of Different Case Hardened and Nitrided Steels

    Trausmuth, A., Gódor, I. & Dietrich, A., 2015, Key engineering materials. 604 ed. Vol. 2014. p. 51-54 4 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  89. Published

    Crack propagation analysis and rehabilitation by HFMI of pre-fatigued welded structures

    Leitner, M., Barsoum, Z. & Schäfers, F., 2015.

    Research output: Contribution to conference › Presentation › Research

  90. Published

    Crack propagation analysis of welded joints by numerical and experimental investigations

    Shah, S., 2015

    Research output: Thesis › Diploma Thesis

  91. Published

    Development of a Fatigue Testing System for CFRP Under Combined Cyclic and Impact Load

    Bärnthaler, C., 2015

    Research output: Thesis › Master's Thesis

  92. Published

    Development of Ring on Disc Tests for Elastomeric Sealing Materials

    Hausberger, A., Grün, F., Godor, I., Pinter, G. & Schwarz, T., 2015, Proceedings of the International Tribology Conference 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Entwicklung einer Prüfmethodik zur Charakterisierung der Haftfestigkeit im Gusszustand gießtechnisch hergestellter Aluminium-Verbundwerkstoffe

    Reisenberger, J. J., 2015

    Research output: Thesis › Master's Thesis

  94. Published

    Entwicklung einer Umlaufbiegeprüfmaschine zur Bewertung des Größeneffekts zyklisch beanspruchter Komponenten

    Doppler, M., 2015

    Research output: Thesis › Master's Thesis

  95. Published

    Fatigue assessment of universal cardan joint based on laboratory specimen tests

    Palma, P., Leitner, M. & Grün, F., 2015.

    Research output: Contribution to conference › Paper

  96. Published

    Fatigue crack growth under constant and variable amplitude loading at semi-elliptical and V-notched steel specimens

    Simunek, D., Leitner, M., Maierhofer, J. & Gänser, H.-P., 2015, In: Procedia Engineering. p. 348-361

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Fatigue strength of HFMI-treated high-strength steel joints under constant and variable amplitude block loading

    Leitner, M., Gerstbrein, S., Ottersböck, M. J. & Stoschka, M., 2015, In: Procedia Engineering. 101, p. 251-258 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Fretting tests for elastomeric sealing materials

    Hausberger, A., Godor, I., Schwarz, T., Berer, M. & Tockner, M., 2015.

    Research output: Contribution to conference › Poster › Research

  99. Published

    Integration of Local Material Properties into Fatigue Design for Engineering Materials

    Kainzinger, P., Grün, F., Redik, S. & Mösenbacher, A., 2015.

    Research output: Contribution to conference › Presentation › Research

  100. Published

    Investigation of Influences on the Material Behavior of sgfr Plastics based on a Local S/N-curves Concept

    Primetzhofer, A., Mösenbacher, A., Grün, F. & Koblmiller, T., 2015.

    Research output: Contribution to conference › Poster › Research

  101. Published

    Korrosionsuntersuchungen von verschraubten Mg-Komponenten

    Jakob, T., 2015

    Research output: Thesis › Diploma Thesis

  102. Published

    Leichtbaupotential geschweißter Strukturen aus hochfestem Stahl

    Leitner, M., 2015, In: Schweiß- & Prüftechnik.

    Research output: Contribution to journal › Article › Research

Previous 12 3 4 5 6 7 8 9 ...14 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401