Chair of Materials Physics (430)

Organisational unit: Chair

601 - 700 out of 1,985Page size: 100

Research output

  1. 2018
  2. E-pub ahead of print

    Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume

    Maity, T., Prashanth, K. G., Balçi, Ö., Wang, Z., Jia, Y. D. & Eckert, J., 25 May 2018, (E-pub ahead of print) In: Composites Part B: Engineering. 150.2018, 1 October, p. 7-13 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation

    Leitner, A., Maier-Kiener, V. & Kiener, D., 24 May 2018, In: Nanomaterials. 8.2018, 6, p. 1-12 12 p., 366.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Effect of boron addition on thermal and mechanical properties of Co-Cr-Mo-C-(B) glass-forming alloys

    Kim, J. T., Hong, S. H., Bian, X., Gokuldoss, P. K., Song, K., Eckert, J., Park, J. M. & Kim, K. B., 17 May 2018, In: Intermetallics. 99.2018, August, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves

    Leitner, A., Maier-Kiener, V. & Kiener, D., 15 May 2018, In: Materials and Design. 146.2018, May, p. 69-80 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Effect of processing temperature on the microstructural characteristics of Cu-Ag nanocomposites: From supersaturation to complete phase decomposition

    Kormout, K. S., Ghosh, P., Bachmaier, A., Hohenwarter, A. & Pippan, R., 8 May 2018, In: Acta Materialia. 154.2018, 1 August, p. 33-44 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Electrosorption of Hydrogen in Pd-Based Metallic Glass Nanofilms

    Sarac, B., Karazehir, T., Mühlbacher, M., Kaynak, B., Gammer, C., Schöberl, T., Sarac, A. S. & Eckert, J., 1 May 2018, In: ACS Applied Energy Materials. 1.2018, 6, p. 2630-2646 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Influence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy Alloy

    Schuh, B., Völker, B., Todt, J., Kormout, K. S., Schell, N. & Hohenwarter, A., 24 Apr 2018, In: Materials. 11.2019, 5, 18 p., 662.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Mechanical Behavior at the Nanoscale: What’s in your Toolbox?

    Cordill, M. & Weinberger, C. R., 19 Apr 2018, In: JOM. 70.2018, 7, p. 1065-1067 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Unzerstörbares Material: Krone der Wissenschaft

    Kiener, D., 17 Apr 2018, In: Kronen-Zeitung. p. 34

    Research output: Contribution to journal › Article › Transfer

  12. Published

    A heat treatable TiB2/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties

    Wang, P., Gammer, C., Brenne, F., Niendorf, T., Eckert, J. & Scudino, S., 10 Apr 2018, In: Composites Part B: Engineering. 147.2018, 15 August, p. 162-168 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Inkjet Printed Wiring Boards with Vertical Interconnect Access on Flexible, Fully Compostable Cellulose Substrates

    Samusjew, A., Lassnig, A., Cordill, M. J., Krawczyk, K. & Grießer, T., 1 Apr 2018, In: Advanced Materials Technologies. 3, 4, 1700250.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Micromechanical properties of macerals in coals from the Ukrainian Donets Basin: maturity trends and implications for unconventional hydrocarbon production

    Vranjes, S., Schöberl, T., Misch, D., Kiener, D. & Sachsenhofer, R., Apr 2018.

    Research output: Contribution to conference › Abstract › peer-review

  15. Published

    Dual self-organised shear banding behaviours and enhanced ductility in phase separating Zr-based bulk metallic glasses

    Zhang, Z. Q., Song, K. K., Sun, B. A., Wang, L., Cui, W. C., Qin, Y. S., Han, X. L., Xue, Q. S., Peng, C. X., Sarac, B., Spieckermann, F., Kaban, I. & Eckert, J., 29 Mar 2018, In: Philosophical magazine. 98.2018, 19, p. 1744-1764 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing

    Alfreider, M., Kozic, D., Kolednik, O. & Kiener, D., 27 Mar 2018, (E-pub ahead of print) In: Materials and Design. 148.2018, 15 June, p. 177-187 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Interfacial mutations in the Al-polyimide system

    Putz, B., Milassin, G., Butenko, Y., Völker, B., Gammer, C., Semprimoschnig, C. & Cordill, M., 22 Mar 2018, In: Surface and interface analysis. 50.2018, 5, p. 579-586 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites

    Sun, H., Song, K., Han, X., Xing, H., Li, X., Wang, S., Kim, J., Chawake, N., Maity, T., Wang, L. & Eckert, J., 20 Mar 2018, In: Metals : open access journal . 8.2018, 3, p. 196 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    A new device for high-temperature in situ GISAXS measurements

    Fritz-Popovski, G., Bodner, S. C., Sosada-Ludwikowska, F., Maier, G. A., Morak, R., Chitu, L., Bruegemann, L., Lange, J., Krane, H. G. & Paris, O., 5 Mar 2018, In: Review of scientific instruments. 89.2018, 3, 035103.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion

    Ghosh, P., Kormout, K. S., Todt, J., Lienert, U., Keckes, J. & Pippan, R., 2 Mar 2018, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233.2018, 3, p. 794-806 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors

    Kauschke, V., Gebert, A., Calin, M., Eckert, J., Scheich, S., Heiss, C. & Lips, K. S., 28 Feb 2018, In: PLOS ONE. 13.2018, 2, 17 p., e0193468.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed

    Salman, O., Funk, A., Waske, A., Eckert, J. & Scudino, S., 15 Feb 2018, In: Technologies. 6.2018, 25, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Anisotropy in local microstructure – Does it affect the tensile properties of the SLM samples?

    Maity, T., Chawake, N., Kim, J. T., Eckert, J. & Prashanth, K. G., 15 Feb 2018, In: Manufacturing Letters. 15.2018 Part A, January, p. 33-37 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Local-structure change rendered by electronic localization-delocalization transition in cerium-based metallic glasses

    Luo, Q., Schwarz, B., Swarbrick, J. C., Bednarčik, J., Zhu, Y., Tang, M., Zheng, L., Li, R., Shen, J. & Eckert, J., 12 Feb 2018, In: Physical Review B. 97.2018, 6, 7 p., 064104.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Amorphous martensite in β-Ti alloys

    Zhang, L., Zhang, H., Ren, X., Eckert, J., Wang, Y., Zhu, Z., Gemming, T. & Pauly, S., 6 Feb 2018, In: Nature Communications. 9.2018, 1, 8 p., 506.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Waste management and attitudes towards cleanliness in medieval central Europe

    Havlíček, F., Pokorná, A. & Zálešák, J., 6 Feb 2018, (E-pub ahead of print) In: Journal of landscape ecology. 10.2017, 3, p. 266-287 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures

    Wang, P., Deng, L., Prashanth, K. G., Pauly, S., Eckert, J. & Scudino, S., 1 Feb 2018, In: Journal of alloys and compounds. 735.2018, February, p. 2263-2266 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys

    Han, X. L., Song, K. K., Zhang, L. M., Xing, H., Sarac, B., Spieckermann, F., Maity, T., Muehlbacher, M., Wang, L., Kaban, I. & Eckert, J., 1 Feb 2018, In: Journal of Materials Engineering and Performance. 27.2018, 3, p. 1005-1015 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Thermally-triggered Dual In-situ Self-healing Metallic Materials

    Kim, J. T., Kim, H. J., Hong, S. H., Park, H. J., Kim, Y. S., Hwang, Y. J., Jeong, Y. B., Park, J. Y., Park, J. M., Sarac, B., Wang, W. M., Eckert, J. & Kim, K. B., 1 Feb 2018, (E-pub ahead of print) In: Scientific reports. 8.2018, 1, 10 p., 2120.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Optimizing mechanical properties of Fe 26.7 Co 26.7 Ni 26.7 Si 8.9 B 11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition

    Zhang, Z., Song, K. K., Guo, S., Xue, Q. S., Xing, H., Cao, C. D., Dai, F. P., Völker, B., Hohenwarter, A., Maity, T., Chawake, N., Kim, J. T., Wang, L., Kaban, I. & Eckert, J., 23 Jan 2018, In: Scientific reports. 9.2019, 360, 14 p., 360.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Influence of Nb on the microstructure and fracture toughness of (Zr0.76Fe0.24)100-xNbx nano-eutectic composites

    Maity, T., Dutta, A., Jana, P. P., Prashanth, K. G., Eckert, J. & Das, J., 11 Jan 2018, In: Materials. 11.2018, 1, 9 p., 113.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

    Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, p. 562-570 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Electrically reversible cracks in an intermetallic film controlled by an electric field

    Liu, Z. Q., Liu, J. H., Biegalski, M. D., Hu, J.-M., Shang, S. L., Ji, Y., Wang, J. M., Hsu, S. L., Wong, A. T., Cordill, M., Gludovatz, B., Marker, C., Yan, H., Feng, Z. X., You, L., Lin, M. W., Ward, T. Z., Liu, Z. K., Jiang, C. B. & Chen, L. Q. & 3 others, Ritchie, R. O., Christen, H. M. & Ramesh, R., 3 Jan 2018, In: Nature Communications. 41.2018, 9, 7 p., 9.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Nanoindentation creep behavior of Cu–Zr metallic glass films

    Wang, Y., Zhang, J., Wu, K., Liu, G., Kiener, D. & Sun, J., 2 Jan 2018, In: Materials Research Letters [Elektronische Ressource]. 6.2018, 1, p. 22-28 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    MnFePSi-Based Magnetocaloric Packed Bed Regenerators: Structural Details Probed by X-Ray Tomography: Structural details probed by X-ray tomography

    Funk, A., Zeilinger, M., Miehe, A., Sopu, D., Eckert, J., Dötz, F. & Waske, A., 1 Jan 2018, In: Chemical engineering science : Génie chimique. 175.2018, 16 January, p. 84-90 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties

    Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P. & Hohenwarter, A., 1 Jan 2018, In: Acta materialia. 142.2018, 1 January, p. 201-212 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors

    Kim, S. Y., Lee, G. Y., Park, G. H., Kim, H. A., Lee, A. Y., Scudino, S., Prashanth, K. G., Kim, D. H., Eckert, J. & Lee, M. H., Jan 2018, (E-pub ahead of print) In: Scientific reports (London : Nature Publishing Group). 8.2018, 12 p., 1090.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered Ti N-SiOx thin film

    Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M. C., Mitterer, C., Niese, S. & Kubec, A., 2018, In: Acta materialia. 144, p. 862-873

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Adhesion of critical interfaces in microelectronics

    Kleinbichler, A., 2018

    Research output: Thesis › Doctoral Thesis

  40. Published

    Atomic-scale characterization of severely deformed nanocrystalline alloys

    Guo, J., 2018

    Research output: Thesis › Doctoral Thesis

  41. Published

    Bulk metallic glass composites fabricated via high pressure torsion

    Krämer, L., 2018

    Research output: Thesis › Doctoral Thesis

  42. Published

    Challenges and solutions in conducting elastic-plastic fracture mechanics experiments inside an SEM

    Alfreider, M., Kozic, D. (Co-editor), Kolednik, O. (Co-editor) & Kiener, D. (Co-editor), 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Combinatorial study of process parameters, microstructure and mechanical properties in Inconel 718 parts produced by additive manufacturing

    Bodner, S., 2018, 62 p.

    Research output: Thesis › Master's Thesis

  44. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2018, In: International journal of refractory metals & hard materials. 71, p. 280-284

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Der Einfluss des Gefüges auf die Biegeeigenschaften von AHSS und UHSS Güten

    Suppan, C., 2018

    Research output: Thesis › Doctoral Thesis

  46. Published

    Electro-mechanical behavior of Al/Mo bilayers studied with in situ straining methods

    Kreiml, P., Rausch, M., Terziyska, V., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M., 2018, In: Thin solid films. p. 131-136

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Electromechanical properties of cathodic arc deposited high entropy alloy thin films on polymer substrates

    Xia, A., Glushko, O., Cordill, M. & Franz, R., 2018, In: Journal of vacuum science & technology / A (JVST). p. 010601-1-010601-4

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Enhanced Ti0.84Ta0.16N diffusion barriers, grown by a hybrid sputtering technique with no substrate heating, between Si (001) wafers and Cu overlayers

    Mühlbacher, M., Greczynski, G., Sartory, B., Schalk, N., Lu, J., Petrov, I., Greene, J. E., Hultman, L. & Mitterer, C., 2018, In: Scientific reports (London : Nature Publishing Group). p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Evolution of structure and mechanical properties of nanocrystalline multi-layered arc-evaporated AlCrN-AlTiN coatings upon thermal loading revealed by X-ray nanodiffraction and tribological investigation

    Klima, S., Jäger, N., Meindlhumer, M., Hruby, H., Keckes, J. & Daniel, R., 2018.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Fracture toughness and microstructural stability of heavily deformed tungsten materials

    Nikolic, V., 2018

    Research output: Thesis › Doctoral Thesis

  51. Published

    Microstructural Characterization of a Laser Surface Remelted Cu-Based Shape Memory Alloy

    Da Silva, M. R., Gargarella, P., Wolf, W., Gustmann, T., Kiminami, C. S., Pauly, S., Eckert, J. & Bolfarini, C., 2018, In: Materials Research. 21.2018, 3, 10 p., e20171044.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Nanoscale residual stress depth profiling by focused ion beam milling and eigenstrain analysis

    Korsunsky, A. M., Salvati, E., Lunt, A. G. J., Sui, T., Mughal, Z. M., Daniel, R., Keckes, J., Bemporad, E. & Sebastiani, M., 2018, In: Materials and Design. 145, p. 55-64

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    New insights into the oxidation behaviour of AlCrSiN coatings and an new approach to avoid trans-interface diffusion at elevated temperatures

    Jäger, N., Klima, S., Meindlhumer, M., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2018.

    Research output: Contribution to conference › Poster › Research

  54. Published

    Plasticity Enhancement of Composite and Nanoscaled Metallic Glasses

    Sopu, D., Stoica, M. & Eckert, J., 2018, NIC Symposium 2018. Jülich, Vol. 49. p. 281 - 289 (Publication Series of the John von Neumann Institute for Computing (NIC) NIC Series; vol. 49).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films

    Schoeppner, R., Taylor, A. A., Cordill, M., Zbib, H. M., Michler, J. & Bahr, D. F., 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, p. 485-492 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Processing – Structure – Property Relationships in Selected Iron-Based Nanostructures

    Müller, T., 2018

    Research output: Thesis › Doctoral Thesis

  57. Published

    Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites

    Song, K. K., Han, X., Pauly, S., Qin, Y. S., Kosiba, K., Peng, C. X., Gong, J. H., Chen, P. X., Wang, L., Sarac, B., Ketov, S., Mühlbacher, M., Spieckermann, F., Kaban, I. & Eckert, J., 2018, In: Materials and Design. 139.2018, 5 February, p. 132-140 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Simulation von Rissen in höchstfesten Stahlblechen mit einem Trefftz-Element für Mixed-Mode-Beanspruchungen

    Hartmann, J., 2018

    Research output: Thesis › Doctoral Thesis

  59. Published

    Spherical nanoindentation as an efficient tool to assess thermo-mechanical behavior of nanoporous Au

    Leitner, A., Maier-Kiener, V. & Kiener, D., 2018.

    Research output: Contribution to conference › Poster › Research

  60. Published

    Sputter deposition of Mo-based multicomponent thin films from rotatable targets : Experiment and simulation

    Rausch, M., Pavlovic, M., Kreiml, P., Cordill, M., Winkler, J. & Mitterer, C., 2018, In: Applied surface science. 455, p. 1029-1036

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Steel laminates with highly improved fracture toughness

    Kasberger, R., 2018

    Research output: Thesis › Doctoral Thesis

  62. Published

    The electro-mechanical properties of cathodic arc deposited high entropy alloy thin films on polymer substrates

    Xia, A., Glushko, O., Cordill, M. & Franz, R., 2018.

    Research output: Contribution to conference › Poster › Research

  63. Published

    Thermodynamic stability and mechanical properties of nanocrystalline high-entropy alloys

    Schuh, B., 2018

    Research output: Thesis › Doctoral Thesis

  64. Published

    Thermo-mechanical behaviour of Mo-Ag thin films

    Trost, C. O. W., 2018

    Research output: Thesis › Master's Thesis

  65. Published

    Towards Radiation Tolerant Materials: Evaluation of Radiation Effects in interface-rich, nanostructured Cu-Fe-Ag

    Wurmshuber, M., 2018

    Research output: Thesis › Master's Thesis

  66. 2017
  67. Published

    Complementary High Spatial Resolution Methods in Materials Science and Engineering

    Paris, O., Lang, D., LI, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Popovski, G., Ganser, C., Teichert, C. & Clemens, H., 31 Dec 2017, In: Advanced engineering materials. 19.2017, 4, 22 p., 1600671.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Daniel Kiener is awarded an ERC Consolidator Grant

    Kiener, D., 21 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  69. Published

    Am Weg zu unzerstörbaren Werkstoffen

    Kiener, D., 14 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  70. Published

    Internal stress and defect-related free volume in submicrocrystalline Ni studied by neutron diffraction and difference dilatometry

    Kotzurek, J. A., Hofmann, M., Simic, S., Pölt, P., Hohenwarter, A., Pippan, R., Sprengel, W. & Würschum, R., 13 Dec 2017, In: Philosophical Magazine Letters. 97.2017, 11, p. 450-458 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    2 Millionen für Super-Werkstoffe

    Kiener, D., 7 Dec 2017, In: Kleine Zeitung - Helle Köpfe. p. 30

    Research output: Contribution to journal › Article › Transfer

  72. E-pub ahead of print

    Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., 6 Dec 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, p. 819 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. E-pub ahead of print

    Structural modification through pressurized sub-Tg annealing of metallic glasses

    Foroughi, A., Ashuri, H., Tavakoli, R., Stoica, M., Şopu, D. & Eckert, J., 6 Dec 2017, (E-pub ahead of print) In: Journal of applied physics. 122.2017, 21, 215106.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Auf dem Weg zu unzerstörbaren Werkstoffen

    Kiener, D., 5 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  75. Published

    Auf dem Weg zu unzerstörbaren Werkstoffen

    Kiener, D., 5 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  76. Published

    Auf dem Weg zu unzerstörbaren Werkstoffen

    Kiener, D., 4 Dec 2017

    Research output: Non-textual form › Web publication/site › Transfer

  77. Published

    A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics

    Rounaghi, S. A., Vanpoucke, D. E. P., Eshghi, H., Scudino, S., Esmaeili, E., Oswald, S. & Eckert, J., Dec 2017, In: Journal of alloys and compounds. 729.2017, 30 December, p. 240-248 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Designing a multifunctional Ti-2Cu-4Ca porous biomaterial with favorable mechanical properties and high bioactivity

    Zhang, L., He, Z. Y., Tan, J., Calin, M., Prashanth, K. G., Sarac, B., Völker, B., Jiang, Y. H., Zhou, R. & Eckert, J., Dec 2017, In: Journal of alloys and compounds. 727.2017, 15 December, p. 338-345 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Interface and stability analysis of Tantalum- and Titanium nitride thin films onto Lithiumniobate

    Vogel, U., Oswald, S. & Eckert, J., Dec 2017, In: Applied surface science. 425.2017, 15 December, p. 254-260 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Masing-Gedächtnispreis 2017

    Kiener, D., Dec 2017, In: Triple m. 2017, 5, p. 19 1 p.

    Research output: Contribution to journal › Article › Transfer

  81. Published

    Powder metallurgical processing of low modulus beta-type Ti-45Nb to bulk and macro-porous compacts

    Schmidt, R., Pilz, S., Lindemann, I., Damm, C., Hufenbach, J., Helth, A., Geissler, D., Henss, A., Rohnke, M., Calin, M., Zimmermann, M., Eckert, J., Lee, M. H. & Gebert, A., Dec 2017, In: Powder technology : an international journal on the science and technology of wet and dry particulate systems. 322.2017, December, p. 393-401 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. E-pub ahead of print

    Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification

    Balci, Ö., Prashanth, K. G., Scudino, S., Somer, M. & Eckert, J., Dec 2017, (E-pub ahead of print) In: Particulate science and technology : an international journal. 37.2019, 3, p. 286-291 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Strain dependence of diffusion in Zr-based bulk amorphous alloy

    Lee, A. Y., Song, J.-K., Oh, H.-R., Kim, H.-A., Kim, S.-Y., Kwon, A.-R., Park, E.-S., Lim, C.-H., Eckert, J. & Lee, M.-H., Dec 2017, In: Journal of applied physics. 122.2017, 24, 245105.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Unzerstörbare Werkstoffe

    Kiener, D., Dec 2017, In: Triple m. 5, p. 12

    Research output: Contribution to journal › Article › Transfer

  85. Published

    ERC Grants bringen zehn Millionen Euro nach Österreich

    Kiener, D., 28 Nov 2017, In: Wiener Zeitung.

    Research output: Contribution to journal › Article › Transfer

  86. Published

    Neues Kapitel in ERC-Erfolgsgeschichte: Zehn Consolidator Grants gehen nach Österreich

    Kiener, D., 28 Nov 2017

    Research output: Non-textual form › Web publication/site › Transfer

  87. Published

    Zehn hochdotierte EU-Förderpreise

    Kiener, D., 28 Nov 2017

    Research output: Non-textual form › Web publication/site › Transfer

  88. Published

    Zehn Millionen-Förderungen des EU-Forschungsrats nach Österreich

    Kiener, D., 28 Nov 2017

    Research output: Non-textual form › Web publication/site › Transfer

  89. Published

    Zehn Millionen-Förderungen des EU-Forschungsrats nach Österreich

    Kiener, D., 28 Nov 2017

    Research output: Non-textual form › Web publication/site › Transfer

  90. Published

    Bond length deviation in CuZr metallic glasses

    Peng, C. X., Şopu, D., Song, K. K., Zhang, Z.-T., Wang, L. & Eckert, J., 27 Nov 2017, In: Physical review : B, Condensed matter and materials physics. 96.2017, 17, 8 p., 174112.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Gradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffraction

    Todt, J., Keckes, J., Winter, G., Staron, P. & Hohenwarter, A., 27 Nov 2017, In: Scripta Materialia. 146.2018, 15 March, p. 178-181 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Wetting behavior and reactivity between liquid Gd and ZrO2 substrate

    Turalska, P., Homa, M., Bruzda, G., Sobczak, N., Kaban, I., Mattern, N. & Eckert, J., 13 Nov 2017, In: Journal of Mining and Metallurgy, Section B: Metallurgy. 53.2017, 3, p. 285-293 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Giant thermal expansion and alpha-precipitation pathways in Ti-alloys

    Bönisch, M., Panigrahi, A., Stoica, M., Calin, M., Ahrens, E., Zehetbauer, M. J., Skrotzki, W. & Eckert, J., 10 Nov 2017, In: Nature Communications. 8.2017, 9 p., 1429.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Substrate-Influenced Thermo-Mechanical Fatigue of Copper Metallizations: Limits of Stoney's equation

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 9 Nov 2017, In: Materials. 10.2017, 11, 8 p., 1287.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Development and application of a heated in-situ SEM micro-testing device

    Fritz, R. & Kiener, D., 1 Nov 2017, In: Measurement. 110.2017, November, p. 356-366 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Nov 2017, In: Acta materialia. 140.2017, November, p. 176-187 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Influencing the crystallization of Fe80Nb10B10 metallic glass by ball milling

    Ramasamy, P., Shahid, R. N., Scudino, S., Eckert, J. & Stoica, M., Nov 2017, In: Journal of alloys and compounds. 725.2017, 25 November, p. 227-236 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites

    Liu, X., Li, C., Eckert, J., Prashanth, K. G., Renk, O., Teng, L., Liu, Y., Bao, R., Tao, J., Shen, T. & Yi, J., Nov 2017, In: Materials characterization. 133.2017, November, p. 122-132 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Strength distribution and fracture analyses of LiNbO3 and LiTaO3 single crystals under biaxial loading

    Gruber, M., Kraleva, I., Supancic, P., Bielen, J., Kiener, D. & Bermejo, R., Nov 2017, In: Journal of the European Ceramic Society. 37, 14, p. 4397-4406

    Research output: Contribution to journal › Article › Research › peer-review

  100. E-pub ahead of print

    Resolving alternating stress gradients and dislocation densities across AlxGa1-xN multilayer structures on Si(111)

    Reisinger, M., Tomberger, M., Zechner, J., Daumiller, I., Sartory, B., Ecker, W., Keckes, J. & Lechner, R. T., 16 Oct 2017, (E-pub ahead of print) In: Applied physics letters. 111.2017, 16, p. 162103 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer

    Hammer, R., Todt, J., Keckes, J., Sartory, B., Parteder, G., Kraft, J. & Defregger, S., 15 Oct 2017, In: Materials and Design. 132.2017, 15 October, p. 72-78 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. E-pub ahead of print

    Influence of severe plastic deformation and specimen orientation on the fatigue crack propagation behavior of a pearlitic steel

    Leitner, T., Trummer, G., Pippan, R. & Hohenwarter, A., 13 Oct 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 710.2018, 5 January, p. 260-270 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...3 4 5 6 7 8 9 10 ...20 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112