Chair of Functional Materials and Materials Systems (425)

Organisational unit: Chair

351 - 400 out of 682Page size: 50

Research output

  1. 2017
  2. Published

    Tailoring age hardening of Ti1-xAlxN by Ta alloying

    Großmann, B., Jamnig, A., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 13 Sept 2017, In: Journal of vacuum science & technology / A (JVST). 35.2017, 6, 6 p., 060604.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Electro-mechanical behavior of sputter-deposited molybdenum-aluminum multilayers

    Kreiml, P., Rausch, M. (Co-editor), Franz, R. (Co-editor), Winkler, J. (Co-editor), Mitterer, C. (Co-editor) & Cordill, M. J., 11 Sept 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. E-pub ahead of print

    Influence of Ar ion etching on the surface topography of cemented carbide cutting inserts

    Gassner, M., Schalk, N., Sartory, B., Pohler, M., Czettl, C. & Mitterer, C., 24 Aug 2017, (E-pub ahead of print) In: International journal of refractory metals & hard materials. 69.2017, December, p. 234-239 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    composição de resina adequada para impressão e método de impressão com o uso da mesma

    Andreas, O. (Inventor), Florian, M. (Inventor), Janine, B. (Inventor), Martina, G. (Inventor), Matthias, E. (Inventor), Meinhart, R. (Inventor) & Thomas, G. (Inventor), 15 Aug 2017, IPC No. C08L 101/ 16 A I, Patent No. BR112016023872, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  6. Published

    Deformation behavior of Re alloyed Mo thin films on flexible substrates: In situ fragmentation analysis supported by first-principles calculations

    Jörg, T., Music, D., Hauser, F., Cordill, M., Franz, R., Köstenbauer, H., Winkler, J., Schneider, J. M. & Mitterer, C., 7 Aug 2017, In: Scientific reports (London : Nature Publishing Group). 2017, 7, 10 p., 7374.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Pattern decomposition for residual stress analysis: a generalization taking into consideration elastic anisotropy and extension to higher-symmetry Laue classes

    Schoderböck, P., Leibenguth, P. & Tkadletz, M., Aug 2017, In: Journal of applied crystallography. 50.2017, 4, p. 1011-1020 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Chemical composition and properties of MoAl thin films deposited by sputtering from MoAl compound targets

    Lorenz, R., O'Sullivan, M., Sprenger, D., Lang, B. & Mitterer, C., 18 May 2017, In: Journal of vacuum science & technology / A (JVST). 35.2017, 6 p., 041504.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Solvothermal synthesis, nanostructural characterization and gas cryo-adsorption studies in a metal-organic framework (IRMOF-1) material

    Tzitzios, V., Kostoglou, N., Giannouri, M., Basina, G., Tampaxis, C., Charakambopoulou, G., Steriotis, T., Polychronopouloe, K., Doumanidis, C. C., Mitterer, C. & Rebholz, C., 4 May 2017, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 42.2017, 37, p. 23899-23907 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Towards high-rate magnetron sputter deposition: Influence of discharge power on deposition process and coating properties

    Saringer, C., 25 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  11. E-pub ahead of print

    Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess

    Zalesak, J., Holec, D., Matko, I., Petrenec, M., Sartory, B., Koutna, N., Daniel, R., Pitonak, R. & Keckes, J., 5 Apr 2017, (E-pub ahead of print) In: Acta materialia. 131.2017, 1 June, p. 391-399 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Selective interface toughness measurements of layered thin films

    Konetschnik, R., Daniel, R., Brunner, R. & Kiener, D., 9 Mar 2017, In: AIP Advances. 7.2017, 3, 5 p., 035307.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Deformation Mechanisms in Magnetron Sputtered Thin Film Metallic Glasses

    Mühlbacher, M., Gammer, C., Konetschnik, R., Schöberl, T., Mitterer, C. & Eckert, J., Mar 2017.

    Research output: Contribution to conference › Poster › Research

  15. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    Oesterreicher, A. (Inventor), GRIEßER, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 23 Feb 2017, IPC No. C09D 181/ 02 A I, Patent No. US2017051112, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  16. Published

    Resin composition suitable for printing and printing method utilizing the same

    安德烈亚斯·厄斯特赖歇尔, A. (Inventor), 托马斯·格里塞尔, T. (Inventor), 马蒂亚斯·埃德勒, M. (Inventor), 弗洛里安·莫斯特格尔, F. (Inventor), 马丁娜·加斯纳, M. (Inventor), 迈因巴尔特·罗特, M. (Inventor) & 亚尼内·比利亚尼, J. (Inventor), 22 Feb 2017, IPC No. C08G 75/ 14 A I, Patent No. CN106456831, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  17. Published

    ZUM DRUCKEN GEEIGNETE HARZZUSAMMENSETZUNG UND DRUCKVERFAHREN DAMIT

    Oesterreicher, A. (Inventor), Griesser, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 22 Feb 2017, IPC No. C08L 101/ 16 A I, Patent No. EP3131952, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  18. Published

    Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Robl, W., Zechner, J. & Mitterer, C., 9 Feb 2017, In: Journal of vacuum science & technology / B (JVST). 35.2017, 2, 11 p., 022201.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHOD UTILIZING THE SAME

    외스터라이허안드레아스 (Inventor), 그리쎄어토마스 (Inventor), 에들러마티아스 (Inventor), 모스테겔플로리안 (Inventor), 가스너마르티나 (Inventor), 로스마인하트 (Inventor) & 빌리아니야니네 (Inventor), 26 Jan 2017, IPC No. C09D 4/ 00 A I, Patent No. KR20170010309, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  20. Published

    Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion

    Völker, B., Jäger, N., Calin, M., Zehetbauer, M. J., Eckert, J. & Hohenwarter, A., 15 Jan 2017, In: Materials & design. 114.2017, 15 January, p. 40-46 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Industrial-scale sputter deposition of molybdenum oxide thin films: Microstructure evolution and properties

    Pachlhofer, J., Martin-Luengo, A. T., Franz, R., Franzke, E., Köstenbauer, H., Winkler, J., Bonanni, A. & Mitterer, C., 4 Jan 2017, In: Journal of vacuum science & technology / A (JVST). 35.2017, 2, 8 p., 021504.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Arc evaporated Ti-Al-N/Cr-Al-N multilayer coating systems for cutting applications

    Teppernegg, T., Czettl, C., Michotte, C. & Mitterer, C., 2017, 19th Plansee Seminar. p. 94/1-94/12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Carbon-based nanoporous materials for hydrogen storage

    Kostoglou, N., 2017

    Research output: Thesis › Doctoral Thesis

  24. Published

    Chemical composition and properties of MoAl thin films deposited by sputtering from MoAl compound targets

    Lorenz, R., O'Sullivan, M., Sprenger, D., Lang, B. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Chemical composition and properties of MoAl thin films deposited sputtering from MoAl compound targets

    Lorenz, R., O`Sullivan, M., Sprenger, D., Lang, B. & Mitterer, C., 2017, 19th Plansee Seminar. p. 91/1-91/11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Hofer, C., Keckes, J., Deluca, M., Pohler, M. & Czettl, C., 2017.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2017, 19th Plansee Seminar. p. 88/1-88/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Design of Molybdenum-based Thin Films for Flexible Electronics

    Jörg, T., 2017

    Research output: Thesis › Doctoral Thesis

  29. Published

    Hard coatings with designed anisotropic thermal conductivity

    Skalnik, K., 2017

    Research output: Thesis › Diploma Thesis

  30. Published

    Hydrogen storage and selective gas separation performance of a nanoporous carbon cloth-like material

    Kostoglou, N., Babic, B., Matovic, B., Constantinides, G., Charalambopoulou, G., Steriotis, T., Baker, M., Polychronopoulou, K., Mitterer, C. & Rebholz, C., 2017.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2017, 19th Plansee Seminar. p. 92/1-92/11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Influence of the Ta content on microstructure, properties and thermal stability of arc evaporated Ti Al Ta N hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M., Jamnig, A. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Influence of the Ta content on microstructure, properties and thermal stabiltiy of arc evaporated Ti1-x-yAlxTayN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M., Jamnig, A. & Mitterer, C., 2017, 19th Plansee Seminar. p. 96/1-96/12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Micromechanical testing of CVD diamond coated WC-Co hard metals

    Thomma, P., Tritremmel, C., Klünsner, T., Czettl, C. & Mitterer, C., 2017, 19th Plansee Seminar. p. 70/1-70/7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Microstructural, grain boundary and interface design of nanostructured thin films: towards structure-property functionalization

    Daniel, R., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  37. Published

    Microstructure, mechanical properties and application behavior of Cr1-xTaxN hard coatings

    Pohler, M., Schalk, N., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2017, 19th Plansee Seminar. p. 53/1-53/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage

    Kostoglou, N., Koczwara, C., Prehal, C., Terziyska, V., Babic, B., Matovic, B., Constantinides, G., Tampaxis, C., Charakambopoulou, G., Steriotis, T., Hinder, S., Baker, M., Polychronopoulou, K., Doumanidis, C. C., Paris, O., Mitterer, C. & Rebholz, C., 2017, In: Nano Energy. 40.2017, October, p. 49-64 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    New insights into the oxidation behaviour of AlCrSiN coatings and a new approach to avoid trans-interface diffusion at elevated temperatures

    Jäger, N., Klima, S., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2017.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 687-693 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Spatial distribution of plasma properties in a dc-magnetron discharge and influence of the discharge power

    Saringer, C., Pajdarova, A. D., Baroch, P., Zorn, K., Franz, R. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Sputter deposition of amorphous carbon thin films in argon, neon and helium atmospheres

    Oberroither, C., 2017

    Research output: Thesis › Diploma Thesis

  43. Published

    Straightforward measurement of thermal conductivity of hard coatings with the TDTR method

    Winkler, M., Tkadletz, M., Schalk, N., Mitterer, C., Bartholomé, K., Pohler, M. & Czettl, C., 2017.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Structural investigations on TiAlN coatings alloyed with C

    Konstantiniuk, F., 2017

    Research output: Thesis › Master's Thesis

  45. Published

    Towards high-rate magnetron sputter deposition: Influence of the discharge power on deposition process and coating properties

    Saringer, C., 2017

    Research output: Thesis › Doctoral Thesis

  46. 2016
  47. Published

    Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

    Bermejo, R., Daniel, R., Schuecker, C., Paris, O., Danzer, R. & Mitterer, C., 26 Dec 2016, In: Advanced engineering materials. 19, 4, 15 p., 1600683.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Resin composition suitable for printing and printing method utilizing the same

    Oesterreicher, A. (Inventor), Griesser, T. (Inventor), Edler, M. (Inventor), Mostegel, F. (Inventor), Gassner, M. (Inventor), Roth, M. (Inventor) & Billiani, J. (Inventor), 17 Nov 2016, IPC No. C08L 101/ 16 A I, Patent No. AU2015248910, Priority date 14 Apr 2015, Priority No. WO2015EP58082

    Research output: Patent

  49. E-pub ahead of print

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M. C., Mitterer, C. & Keckes, J., 2 Oct 2016, (E-pub ahead of print) In: Acta materialia. 122.2017, 1 January, p. 130-137 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Comparison of reactive magnetron sputter deposition of TiNx and TiOx as a function of the discharge power

    Saringer, C., Franz, R., Zorn, K. & Mitterer, C., 14 Sept 2016.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Advances in coating and thin film characterization

    Mitterer, C., 13 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Nanoporous graphene derived by plasma processing: Properties towards hydrogen adsorption and selective carbon dioxide/methan gas separation

    Kostoglou, N., Tian, M., Holyfield, L., Ting, V., Mays, T., Tampaxis, C., Steriotis, T., Polychronopoulou, K., Walters, I., Mitterer, C. & Rebholz, C., 13 Sept 2016.

    Research output: Contribution to conference › Poster › Research

Previous 1...4 5 6 7 8 9 10 11 ...14 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben
  • Main phone number: +43 3842 402 4201