Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

401 - 450 out of 1,066Page size: 50

Research output

  1. 2017
  2. Published

    Thermodynamische Untersuchung der Fe-Ecke des Fe-C-Si-Mn Systems

    Romankiewicz, M., 2017

    Research output: Thesis › Master's Thesis

  3. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Untersuchungen zur Fehlerquellenidentifikation an Stahlproben durch Nutzung des SILENOS-Prüfsystems

    Klußmann, Z., 2017

    Research output: Thesis › Master's Thesis

  5. Published

    Untersuchung zur Optimierung von Schweißschlacken für das Lichtbogenhandschweißen mit Fülldrahtelektrode

    Mayer, P. M., 2017

    Research output: Thesis › Master's Thesis

  6. 2016
  7. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    HT-LSCM - A valuable tool for surface microstructure investigations

    Fuchs, N., Krobath, R., Bernhard, C., Ilie, S. & Xia, G., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Dec 2016, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-6

    Research output: Contribution to journal › Article › Research

  10. Published

    Evaluation of the Potential for Reduction of CO2 Emissions at the Secondary Metallurgy

    Gerasev, A., Bundschuh, P., Schenk, J., Viertauer, A., Trummer, B., Arth, G., Rössler, R. & Reisinger, P., 1 Nov 2016, In: RHI bulletin : the journal of refractory innovations. 2016, 1, p. 28-34 7 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Thermodynamische Modellierung der Schlackenfahrweise in der Sekundärmetallurgie

    Penz, F., Bundschuh, P., Griessacher, T. & Schenk, J., 13 Oct 2016, Schlacken-Symposium 2016: Kreislaufwirtschaft stabil weiter entwickeln. p. 153-166 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Hydrogen as Reducing Agent in Ironmaking and Steemaking - Status, Potentials, Challenges

    Schenk, J., 4 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Austenite grain growth investigated by complementary in-situ techniques

    Gamsjäger, E., Tichauer, W., Lederhaas, B., Garcin, T. & Militzer, M., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY AND TO REDUCE THE CO2 EMISSION OF THE STEEL PRODUCTION IN EUROPE

    Schenk, J. & Lüngen, H.-B., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings. Linz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Sept 2016, 7th European Coke and Ironmaking Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    In-situ Beobachtung des Verhaltens nichtmetallischer Einschlüsse mittels Hochtemperatur- Laser-Scanning- Konfokalmikroskopie

    Michelic, S. K., Dieguez Salgado, U., Loder, D. & Bernhard, C., Sept 2016, In: Giesserei-Praxis. 67.2016, 9, p. 337-340 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Experimental und numerical investigations on cooling efficiency of Air-Mist nozzles on steel during continuous casting

    Arth, G., Taferner, M., Bernhard, C. & Michelic, S. C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012033.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. K. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Metallurgical approach of development of a hot crack resistant metal-cored wire

    Stein, H., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Microsegregation Model with Local Equilibrium Partition Coefficients During Solidification of Steels

    You, D., Bernhard, C., Wieser, G. & Michelic, S., Jul 2016, In: Steel research international. 87.2016, 7, p. 840-849 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., Michelic, S. K. & Bernhard, C., 28 Jun 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161.2016, 7, p. 315-320 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Hydrogen as Reducing Agent in Iron and Steel Production - Status, Potentials, Challenges

    Schenk, J., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  24. Published

    Near net shape casting - current status and future perspectives

    Bernhard, C., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  25. Published

    Characterization and Analysis of Non-Metallic Inclusions in Low-Carbon Fe–Mn–Si–Al TWIP Steels

    Liu, H., Liu, J., Michelic, S. K., Shen, S., Su, X., Wu, B. & Ding, H., 15 Jun 2016, In: Steel research international. 87.2016, 12, p. 1723-1732 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Determination of the specific surface area of cokes and chars for simulated process conditions of blast furnace and smelting reduction routes

    Bhattacharyya, A., Schenk, J., Thaler, C. & Stocker, H., Jun 2016, SCANMET V Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    A transient 2D solidification model for defect prevention in the continuous casting process

    Bernhard, C., 25 May 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., 16 May 2016, Proceedings AISTech 2016. Pittsburgh, USA, p. 2497-2506 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Influence of slag properties on the alkali-cycle of a blast furnace

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 16 May 2016, Proceedings of the AISTech 2016. p. 341-352

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Research on continuous casting at University of Leoben - An overview

    Bernhard, C., 11 May 2016.

    Research output: Contribution to conference › Presentation › Transfer

  31. Published

    Charakterisierung der Erstarrungsmechanismen beim Vergießen großer Blöcke mit einem neuen Gießverfahren

    Riedler, M., Michelic, S. & Bernhard, C., 10 May 2016.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., 10 May 2016.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions

    Bhattacharyya, A., Schenk, J., Letofsky-Papst, I. & Albering, J., May 2016, Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies—Part 2: Characterization and Evaluation of Worldwide Traded Fine Iron Ore Brands

    Pichler, A., Mali, H., Plaul, J. F., Schenk, J., Skorianz, M. & Weiss, B., May 2016, In: Steel research international. 87.2016, 5, p. 642-652 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    método para remover co2 de gases de descarga, tais como gases de descarga de plantas para produzir ferro bruto ou gases de descarga de plantas de gás síntese

    Jan-Friedemann, P. (Inventor), Johannes, L. S. (Inventor), Kurt, W. (Inventor) & Robert, M. (Inventor), 26 Apr 2016, IPC No. C01B 32/ 50 A I, Patent No. BR112012005539, Priority date 7 Sept 2010, Priority No. WO2010EP63099

    Research output: Patent

  36. Published

    Thermodynamic optimization of individual steel database by means of systematic DSC measurements according the CALPHAD approach

    Presoly, P., Six, J. & Bernhard, C., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012013.

    Research output: Contribution to journal › Conference article › peer-review

  37. E-pub ahead of print

    Systematic investigation of acicular ferrite formation on laboratory scale

    Loder, D. & Michelic, S., 6 Apr 2016, (E-pub ahead of print) In: Materials science and technology. 33.2017, 2, p. 162-171 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Characteristics of AlN inclusions in low carbon Fe-Mn-Si-Al TWIP steel produced by AOD-ESR method

    Liu, H., Liu, J., Michelic, S. K., Wei, F., Zhuang, C., Han, Z. & Li, S., 18 Mar 2016, (E-pub ahead of print) In: Ironmaking and steelmaking. 43.2016, 3, p. 171-179 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Study on Oxide Inclusion Dissolution in Secondary Steelmaking Slags using High Temperature Confocal Scanning Laser Microscopy

    Michelic, S. K., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., Jan 2016, In: Steel research international. 87.2016, 1, p. 57-67 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Anpassung von Mikroseigerungsmodellen durch Heißrissuntersuchungen an erstarrendem Stahl

    Bernhard, M. C., 2016

    Research output: Thesis › Master's Thesis

  41. Published

    Bestimmung von Kriterien zur Beurteilung der Sinterqualität

    Pankratz, C., 2016

    Research output: Thesis › Master's Thesis

  42. Published

    Betriebsmessungen mit dem LIBS-Verfahren zur Bestimmung der Zusammensetzung von LD-Schlacken

    Brunnbauer, C., 2016

    Research output: Thesis › Master's Thesis

  43. Published

    Bewertung des Potenzials nichtmetallischer Einschlüsse zur azikularferritischen Keimung in verschiedenen Stahlgüten

    Mayerhofer, A., Loder, D. & Michelic, S., 2016.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Dissolution kinetics of CaO and MgO in converter steelmaking slags

    Cheremisina, E., 2016

    Research output: Thesis › Doctoral Thesis

  45. Published

    Einfluss der Abkühlbedingungen auf ausgewählte Eigenschaften und Eigenspannungen in warmumgeformten zylindrischen Hohlkörpern

    Frosch, G., 2016

    Research output: Thesis › Master's Thesis

  46. Published

    Einfluss der Mischgutfeuchte, der Korngrößenverteilung und weiteren agglomerationsrelevanten Korneigenschaften von Sintereinsatzmischungen auf den Druckverlust über die Schüttungen und die Sinterleistung

    Griesser, A. S., 2016

    Research output: Thesis › Master's Thesis

  47. Published

    Einfluss der sekundärmetallurgischen Schlackenchemie auf das Auflösungsverhalten von Al2O3 und MA-Spinell Partikeln in ausgewählten Laborversuchen

    Goriupp, J., Schenk, J., Klösch, G. & Alexander, P., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 3, p. 102 107 p.

    Research output: Contribution to journal › Article › Research

  48. Published

    Ermittlung der spezifischen Wärmekapazität mittels HT-DSC von höher legierten Stählen

    Gruber, B., 2016

    Research output: Thesis › Master's Thesis

  49. Published

    Evaluation of the potential for reduction of CO2-emissions at the secondary metallurgy

    Gerasev, A., 2016

    Research output: Thesis › Master's Thesis

  50. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 8 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Influence of alkalis on the process behavior of iron carriers in different ironmaking reactors

    Pichler, A., 2016

    Research output: Thesis › Doctoral Thesis

  52. Published

    In-situ Beobachtung von Austenitkornwachstum und Phasenumwandlungen in Stählen mittels Hochtemperatur-Laser-Scanning-Konfokal-Mikroskopie

    Fuchs, N., 2016

    Research output: Thesis › Master's Thesis

Previous 1...5 6 7 8 9 10 11 12 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201