Research output

1 - 100 out of 32,757Page size: 100

10
20
50
100

Sort by: 1st author

Published
The bulk and interfacial structures of the η (Al2Au) precipitate phase
Bourgeois, L., Zhang, Z., Li, J. & Medhekar, N., 2016, In: Acta materialia. 105.2016, 15 February, p. 284-293 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Effect of local loading on microstructure and enhanced mechanical property of large complex castings prepared by Al–Si–Fe–Mn–Mg–Cu alloy during squeeze casting
Meng, S., Gao, M., Liu, Y., Yang, L., Ma, H., LI, J., Wang, J. & Guan, R., 2024, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY.
Research output: Contribution to journal › Article › Research › peer-review
Published
Precipitation microstructure in Al-Si-Mg-Mn alloy with Zr additions
Vončina, M., Medved, J., Kores, S., Xie, P., Schumacher, P. & LI, J., Sept 2019, In: Materials characterization. 155.2019, September, 8 p., 109820.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure, texture evolution and tensile properties of extruded Mg-4.58Zn-2.6Gd-0.16Zr alloy
Xiao, L., Yang, G., Chen, J., Luo, S. F., Li, J. & Jie, W., 28 Jan 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 744.2019, January, p. 277-289 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and Tensile Properties of AZ61 Alloy Sheets Processed by High-Ratio Extrusion with Subsequent Direct Aging Treatment
Zhang, C-C., Wang, H-Y., Zha, M., Wang, C., Li, J-H., Yang, Z-Z. & Jiang, Q-C., 26 May 2018, In: Materials. 11.2018, 6, 11 p., 895.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and mechanical properties of Cu_xNb_1- _x alloys prepared by ball milling and high pressure torsion compacting
Abad, M. D., Parker, S., Kiener, D., Primorac, M. M. & Hosemann, P., 5 May 2015, In: Journal of alloys and compounds. 630, p. 117-125 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure and mechanical properties of novel CuNb alloys prepared by ball milling and high pressure torsion
Abad, M. D., Parker, S., Kiener, D., Primorac, M-M. & Hosemann, P., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Chemically induced fracturing in alkali feldspar
Abart, R., Schäffer, A. K., Scheidl, K. & Fischer, F. D., 2012.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Thermodynamic Model for Diffusion controlled Reaction Rim Growth in a Binary System: Application to the Forsterite-Enstatite-Quartz System
Abart, R., Petrishcheva, E., Fischer, F. D. & Svoboda, J., 2009, In: American Journal of Science. 309, p. 114-131
Research output: Contribution to journal › Article › Research › peer-review
Published
Evolution of chemically induced cracks in alkali feldspar: thermodynamic analysis
Abart, R., Petrishcheva, E., Habler, G., Sutter, C., Fischer, F-D., Predan, J., Kegl, M. & Rammerstorfer, F. G., 3 May 2022, In: Physics and Chemistry of Minerals. 49.2022, 14, 15 p., 14.
Research output: Contribution to journal › Article › Research › peer-review
Published
Production and characterization of a polysaccharide/polyamide blend from Pseudomonas atacamensis M7D1 strain for enhanced oil recovery application
Abbaspour, A., Jafari, A., Tarahomi, D. S., Mousavi, S. M. & Kharrat, R., 15 Jun 2023, In: International Journal of Biological Macromolecules. 240.2023, 15 June, 11 p., 124421.
Research output: Contribution to journal › Article › Research › peer-review
Published
A new method for polychromatic X-ray μLaue diffraction on a Cu pillar using an energy-dispersive pn-junction charge-coupled device
Abboud, A., Kirchlechner, C., Send, S., Micha, J. S., Ulrich, O., Pashniak, N., Strüder, L. W. J., Keckes, J. & Pietsch, U., 2014, In: Review of scientific instruments. 85, p. 1139011-1139018
Research output: Contribution to journal › Article › Research › peer-review
Published
Identification of potential candidates for Linear Rod Pump (LRP) applications in OMV PETROM and definition of standard LRP types
Abdalla, H., 2013
Research output: Thesis › Master's Thesis
Published
Differentiation of the Artificial Rocks in Mechanical Cutting Based on the Acoustic Emission Signals
Abdallah, A. S. M., 2021
Research output: Thesis › Master's Thesis
E-pub ahead of print
Large-scale underground hydrogen storage: Integrated modeling of reservoir-wellbore system
Abdellatif, M. M., Hashemi, M. & Azizmohammadi, S., 24 Feb 2023, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 48.2023, 50, p. 19160-19171 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Integrated Modeling of Underground Hydrogen Storage: Viking A Field, the North Sea
Abdellatif, M. M., 2022
Research output: Thesis › Master's Thesis
Published
Development of a Sand Prediction Model for a Gas Field Located in South Tunisia
Abdellatif, M., 2017
Research output: Thesis › Master's Thesis
Published
Feasibility of Surfactant-Based EOR Mechanisms in Microfluidics
Abdellatif, S., 2018
Research output: Thesis › Master's Thesis
Published
Suitability of Self-Reducing and Slag-Forming Briquettes for Electric Arc Furnace Use Based on Laboratory Tests
Abdelrahim, A., Aula, M., Iljana, M., Willms, T., Echterhof, T., Steinlechner, S., Mombelli, D., Mapelli, C., Omran, M., Preiss, S. & Fabritius, T., 26 Oct 2021, In: Steel research international.
Research output: Contribution to journal › Article › Research › peer-review
Published
Regular graphs with minimum spectral gap
Abdi, M., Ghorbani, E. & Imrich, W., Jun 2021, In: European journal of combinatorics . 95, 18 p., 103328.
Research output: Contribution to journal › Article › Research › peer-review
Published
Designing new biocompatible glass-forming Ti_75- _xZr₁₀Nb_xSi₁₅ (x = 0, 15) alloys: Corrosion, passivity, and apatite formation
Abdi, S., Oswald, S., Gostin, P. F., Helth, A., Sort, J., Barõ, M. D., Calin, M., Schultz, L., Eckert, J. & Gebert, A., 1 Jan 2016, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 104, 1, p. 27-38 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermal oxidation behavior of glass-forming Ti-Zr-(Nb)-Si alloys
Abdi, S., Bönisch, M., Oswald, S., Khoshkhoo, M. S., Gruner, W., Lorenzetti, M., Wolff, U., Calin, M., Eckert, J. & Gebert, A., 1 May 2016, In: Journal of materials research (JMR). 31.2016, 9, p. 1264-1274 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Ab initio study of martensitic and ordering transformations in intermetallic TiAl-alloys
Abdoshahi, N., 2021
Research output: Thesis › Doctoral Thesis
E-pub ahead of print
On the energetics of the cubic-to-hexagonal transformations in TiAl+Mo alloys
Abdoshahi, N., Dehghani, M., Ruban, A. V., Friák, M., Šob, M., Spitaler, J. & Holec, D., 24 Aug 2022, (E-pub ahead of print) In: Acta materialia. 240.2022, November, p. 118268 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Ordering and diffusionless transformations in TiAl
Abdoshahi, N. & Holec, D., 2018.
Research output: Contribution to conference › Poster › Research
Published
Structural stability and mechanical properties of TiAl+Mo alloys: A comprehensive ab initio study
Abdoshahi, N., Dehghani, M., Hatzenbichler, L., Spörk-Erdely, P., Ruban, A. V., Musi, M., Mayer, S., Spitaler, J. & Holec, D., Dec 2021, In: Acta materialia. 221.2021, December, 14 p., 117427.
Research output: Contribution to journal › Article › Research › peer-review
Published
Ab initio study of chemical disorder as an effective stabilizing mechanism of bcc-based TiAl(+Mo)
Abdoshahi, N., Spörk-Erdely, P., Friák, M., Mayer, S., Šob, M. & Holec, D., 2 Oct 2020, In: Physical review materials . 24.020, 10, 14 p., 103604.
Research output: Contribution to journal › Article › Research › peer-review
Published
Condensate Bank Modelling of Gas Condensate Reservoirs
Abdul-Jaliel, H-E. M., 2010
Research output: Thesis › Master's Thesis
Published
A comprehensive review of nanoparticles: Effect on water-based drilling fluids and wellbore stability
Abdullah, A. H., Ridha, S., Mohshim, D. F., Yusuf, M., Kamyab, H., Krishna, S. & Maoinser, M. A., 1 Sept 2022, In: Chemosphere. 308.2022, December, Part 1, 17 p., 136274.
Research output: Contribution to journal › Article › Research › peer-review
Study the effect of fracture inclination, spacing and intensity on polymer flooding efficiency
Abedi, B. & Kharrat, R., 9 Jul 2016, (E-pub ahead of print) In: Journal of Natural Gas Science and Engineering. 34.2016, August, p. 645-649 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Experimental study of polymer flooding in fractured systems using five-spot glass micromodel: The role of fracture geometrical properties
Abedi, B., Ghazanfari, M. & Kharrat, R., 1 Oct 2012, In: Energy exploration & exploitation. 30, 5, p. 689-706 18 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Fused Filament Fabrication (FFF) of Metal-Ceramic Components
Abel, J., Scheithauer, U., Janics, T., Hampel, S., Cano Cano, S., Müller-Köhn, A., Günther, A., Kukla, C. & Moritz, T., 11 Jan 2019, In: JoVE. 2019, 143, p. 1-13
Research output: Contribution to journal › Article › Research › peer-review
Published
Digitalisation of manual sorting through Artificial Intelligence, Machine Learning and Human Machine Interaction
Aberger, J. & Sarc, R., 18 Sept 2023.
Research output: Contribution to conference › Poster › Research
Published
Potentials in Hand-Sorting of Plastic Waste and Further Developments with HMIs in the Hand-Sorting Process
Aberger, J., Khodier, K. & Sarc, R., 24 Sept 2023.
Research output: Contribution to conference › Paper
Published
Digitalisierung der Handsortierung durch künstliche Intelligenz, Machine Learning und Human Machine Interaction
Aberger, J. & Sarc, R., 19 Apr 2023.
Research output: Contribution to conference › Poster › Research
Published
Recyclingfähigkeit phosphorhaltiger Metallschleifschlämme
Aberger, J., 2022
Research output: Thesis › Master's Thesis
E-pub ahead of print
Digitalisierung der Handsortierung durch Künstliche Intelligenz, Machine Learning und Human Machine Interaction
Aberger, J., Khodier, K. & Sarc, R., 15 Nov 2023, (E-pub ahead of print) In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 2023, ??? Stand: 4. Dezember 2023, 7 p.
Research output: Contribution to journal › Article › Research
Published
RecAlcle: Supporting manual sorting workers with Aritifical Intelligence and Machine Learning - Framework and Data Acquisition
Aberger, J., Khodier, K. & Sarc, R., 6 Oct 2023, Proceedings of Sardinia 2023.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Vergleichende Betrachtung zur Klimarelevanz bei der Aufreinigung schwermetallbelasteter Wässer
Abi Fadel-Gampersberger, A. J. P., 2022
Research output: Thesis › Master's Thesis
Published
Viskositätsbestimmung von nicht newtonschen Schmelzen
Ablasser, M., 2021
Research output: Thesis › Master's Thesis
Published
Studying the Effect of Cellulose Nanocrystals on Oil Well Cement Properties
Abou Askar, I., 2021
Research output: Thesis › Master's Thesis
E-pub ahead of print
The bin covering with delivery problem, extended investigations for the online case
Abraham, G., Auer, P., Dosa, G., Dulai, T., Tuza, Z. & Werner-Stark, Á., 30 Apr 2022, (E-pub ahead of print) In: Central European Journal of Operations Research. 31.2023, March, p. 21-47 27 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
A New Approach to History Matching of Water Driven Oil Reservoirs
Abrahem, F., 2010
Research output: Thesis › Doctoral Thesis
Published
Recovery Optimization in Commingled Produced Reservoir Units: A Case Study on Lower GIR
Abrahem, F., 2006, 120 p.
Research output: Thesis › Master's Thesis
Published
Mineralogical Characterization of Dilband Iron Ore Deposits of Balochistan, Pakistan
Abro, M. I. & Böhm, A., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 206-210
Research output: Contribution to journal › Article › Research › peer-review
Published
Electronic properties of YBa2Cu306.5 compared to YBa2Cu307 in Anharmonic Properties of High-Tc Cuprates
Abt, R., Kouba, R. & Draxl, C., 1995, Proceedings of the International Workshop on Anharmonic Properties of High-Tc Cuprates . p. 236-239
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Optical response of high temperature superconductors by full potential LAPW band structure calculations
Abt, R., Draxl, C. & Knoll, P., 1994, In: Physica B: Condensed Matter. 194-196, 2, p. 1451-1452
Research output: Contribution to journal › Article › Research › peer-review
Published
Piezoelectric Properties of Zinc Oxide Thin Films Grown by Plasma-Enhanced Atomic Layer Deposition
Abu Ali, T., Pilz, J., Schäffner, P., Kratzer, M., Teichert, C., Stadlober, B. & Coclite, A. M., Nov 2020, In: Physica Status Solidi / A, Applications and Materials Science. 217, 21, 2000319.
Research output: Contribution to journal › Article › Research › peer-review
Published
Characterization of technologically produced carbon (CMP) applied in agriculture
Abu Zahra, N., Prohaska, T., Bandoniene, D., Fernández Balado, C., Hood-Nowotny, R., Soja, G., Obenaus-Emler, R., Wagner, S. & Puschenreiter, M., 2 Feb 2023.
Research output: Contribution to conference › Poster › Research
Published
Carbon produced by methane plasmalysis - a potential soil amendment?
Abu Zahra, N., Bandoniene, D., Fernández Balado, C., Kanzler, V., Hood-Nowotny, R., Soja, G., Obenaus-Emler, R., Wagner, S., Puschenreiter, M. & Prohaska, T., 10 Jul 2023.
Research output: Contribution to conference › Poster › Research
Published
Comparison of Flow Models at Different Scales Using the 10th SPE Comparative Solution Project
Abunaja, M. S., 2007
Research output: Thesis › Master's Thesis
Published
A Production Method for Standardized Continuous Fiber Reinforced FFF Filament
Aburaia, M., Bucher, C., Lackner, M., Gonzalez-Gutierrez, J., Zhang, H. & Lammer, H., 20 May 2020, In: Biomaterials and Medical Applications. 4.2020, 1, 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Optimisation of process management and development of key performance indicators within an integrated management system in exploration & production
Abwerzger, G., 18 Oct 2005, 148 p.
Research output: Thesis › Diploma Thesis › peer-review
Published
Life extension of pre-fatigued friction stir welded AA6061 joints by high frequency mechanical impact (HFMI) treatment
Ackiel Mohamed, M., Manurung, Y., Abdullah, MA. K. & Leitner, M., 2018, Proceedings of the 71st IIW International Conference.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
FFG-Leitprojekt: "addmanu.at" Generative Fertigung
Adacker, C. (ed.), 2015, In: Triple m. 2015, 2, p. 9 1 p.
Research output: Contribution to journal › Article › Transfer › peer-review
Published
Studie: Quantitative und qualitative Identifikation von relevanten sekundären Stoffströmen in Österreich: Endpräsentation
Adam, J., Kapeller, J. & Luidold, S., 27 Nov 2015.
Research output: Contribution to conference › Presentation › Research
Published
Sekundärrohstoffströme
Adam, J. & Pomberger, R., 2016, In: Triple m. Ausgabe 2, p. 10 1 p.
Research output: Contribution to journal › Article › Research
Published
Korngrößenspezifische Charakterisierung eines marktüblichen gemischten Gewerbemülls für die EBS Produktion
Adam, J., Curtis, A. & Sarc, R., Nov 2018, Recy & DepoTech 2018: VORTRÄGE-Konferenzband zur 14. Recy & DepoTech Band. Vol. 14. p. 781 - 786 6 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Erforsche die Stoffflusswirtschaft
Adam, J. & Aldrian, A., 2014.
Research output: Contribution to conference › Poster › Research
Published
Gewinnung von Energie aus Reststoffen in dezentralen Anlagen unter Annäherung an CO2-Neutralität
Adam, J. & Sarc, R., 2013
Research output: Book/Report › Commissioned report › Transfer
Published
Sortierung und Klassifikation von Materialien aus der informellen Sammlung
Adam, J., Pomberger, R. & Menapace, H., 2013.
Research output: Contribution to conference › Poster › Research
Published
Ermittlung der Strategien zur Prozessoptimierung, Kunststoffabfallvermeidung und -verwertung
Adam, J. & Sarc, R., 2012
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Integration of Risk Management into existing Pharmaceutical Quality Systems
Adam, S., 2013, 106 p.
Research output: Thesis › Master's Thesis (University Course)
Published
Environmentally friendly conveying of bulk materials on a Sandvik Mobile Machine
Adamer, M., 2013
Research output: Thesis › Master's Thesis (University Course)
Published
Untersuchung des Verhaltens von Phosphor, Schwefel und Kupfer während des Wasserstoffplasma-Schmelzreduktionsprozesses
Adami, B., 2023
Research output: Thesis › Master's Thesis
Published
Investigations on Raw Material Samples of European Deposits for the Application in Plastics
Adelsmayr, T., 2014, 134 p.
Research output: Thesis › Master's Thesis
Published
F. u E. Metallurgie - Endbericht 2006
Adendorff, M., Holleis, B., Potesser, M., Schmidt, H-P. & Wagendorfer, G., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Untersuchungen der Thermoschockbelastungen an keramischen Kugeln und Balken mit künstlichen Defekten
Adlmann, F. A., 2012
Research output: Thesis › Diploma Thesis
Published
Electrified/charged aqueous interfaces: general discussion
Advincula, X. R., Backus, E. H. G., Bonn, M., Cox, S. J., Diebold, U., Fellows, A., Finney, A. R., Goel, G., Hedley, J., Jiang, Y., Jin, D., Kapil, V., Kavokine, N., Klein, J., Laage, D., Mohandas, N., Morgenstern, K., Mukherjee, T., Olvera de la Cruz, M., Orlikowska-Rzeznik, H., & 14 othersPerkin, S., Piaggi, P. M., Gomez Rodellar, C., Ryan, P., Sayer, T., Seyffertitz, M., Shepelenko, M., Sosso, G. C., Thämer, M., Vilangottunjalil, A., Walker-Gibbons, R., Wang, Y., Willard, A. P. & Zhang, P., 3 Jan 2024, In: Faraday Discussions. 2024, 249, p. 27 381 p.
Research output: Contribution to journal › Article › Research
Published
Development and Evaluation of Criteria for the Comparison and Optimization of Bottom Hole Assemblies
Aelfers, F., 2016
Research output: Thesis › Master's Thesis
Published
Asphaltene precipitation study during natural depletion at reservoir conditions
Afshari, S., Kharrat, R. & Ghazanfari, M. H., 2010, Society of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC. p. 179-186 8 p. (Society of Petroleum Engineers - International Oil and Gas Conference and Exhibition in China 2010, IOGCEC; vol. 1).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Consideration of orthotropic thermal properties in the life time of short fibre reinforced polymers - Concept
Afsharnia, R., 2023
Research output: Thesis › Master's Thesis
Published
Consideration of orthotropic thermal properties of short fibre reinforced plastics
Afsharnia, R., Stadler, G., Primetzhofer, A., Pinter, G. G. & Oswald-Tranta, B., 26 Jun 2022.
Research output: Contribution to conference › Presentation › Research
Stochastic Control of Tidal Dynamics Equation with Lévy Noise
Agarwal, P., Manna, U. & Mukherjee, D., 1 Apr 2019, In: Applied Mathematics and Optimization. 79.2019, 2, p. 327-396 70 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
NEW GEOCHEMICAL INSIGHTS INTO CENOZOIC SOURCE ROCKS IN AZERBAIJAN: IMPLICATIONS FOR PETROLEUM SYSTEMS IN THE SOUTH CASPIAN REGION
Aghayeva, V., Sachsenhofer, R., van Baak, C. G. C., Bechtel, A., Hoyle, T. M., Selby, D., Shiyanova, N. & Vincent, S. J., Jul 2021, In: Journal of Petroleum Geology. 44, 3, p. 349-384 36 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Stratigraphy of the Cenozoic succession in eastern Azerbaijan: Implications for petroleum systems and paleogeography in the Caspian basin
Aghayeva, V., Sachsenhofer, R., van Baak, C. G. C., Bayramova, S., Ćorić, S., Frühwirth, M., Rzayeva, E. & Vincent, S. J., Apr 2023, In: Marine and petroleum geology. 150.2023, April, 25 p., 106148.
Research output: Contribution to journal › Article › Research › peer-review
Published
A comparative study of stress influence on fracture apertures in fragmented rocks
Agheshlui, H., Sedaghat, M. & Azizmohammadi, S., 1 Feb 2019, In: Journal of Rock Mechanics and Geotechnical Engineering. 11.2019, 1, p. 38-45 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Production of charcoal as an alternative reducing agent from agricultural residues using a semi-continuous semi-pilot scale pyrolysis screw reactor
Agirre Arisketa, I., Griessacher, T., Rösler, G. & Antrekowitsch, J., 2013, In: Fuel Processing Technology. 106, 2, p. 114-121
Research output: Contribution to journal › Article › Research › peer-review
Published
Charakterisierung des Bauteilverhaltens von Hydraulikschläuchen unter hochfrequenter Belastung
Aglassinger, S., 2012
Research output: Thesis › Master's Thesis
Published
Droplet phase change phenomena in CFD simulations of wet scrubbers and quenching processes
Aguayo Arellano, P. I., 2005
Research output: Thesis › Doctoral Thesis
Published
Regional Distribution of Magnetic susceptibilities and 3 D Modelling of Aeromagnetik anomalies in the Central Eastern alps (Western Tauern Window), Austria.
Ahl, A., Slapansky, P., Belocky, R., Piber, A., Seiberl, W., Zechner, M. & Mauritsch, H. J., 2007, In: Austrian journal of earth sciences. 100, p. 138-151
Research output: Contribution to journal › Article › Research › peer-review
Published
ENVIRONMENTAL LIFE CYCLE ASSESSMENT
Ahlman, T., 2010
Research output: Thesis › Master's Thesis (University Course)
Published
Inducing micro-cracks improves the recovery in heap leaching operations
Ahlqvist, N-P. J., 2016
Research output: Thesis › Master's Thesis (University Course)
Published
Analysis of well-known reservoir models and sensitivity of different parameters to estimate deliverability from vertical, horizontal and fracked gas wells
Ahmad, H., 2016
Research output: Thesis › Master's Thesis
Published
Numerical Simulation on Residual Stress and Substrate Deformation of Bead-On-Plate of SS316L Using Inherent Strain Method
Ahmad, S. N., Manurung, Y. H. P., Taufek, T. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 723-738 16 p. (Lecture Notes in Mechanical Engineering; vol. 46).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Investigation of Material Property Model on Substrate Deformation Induced by Thick-Walled WAAM Process Using Numerical Computation
Ahmad, S. N., Manurung, Y. H. P., Mat, M. F. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 747-761 15 p. (Lecture Notes in Mechanical Engineering; vol. 46).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of Al-4 wt.%Cu ingot using a 5-phase model
Ahmadein, M., Wu, M. & Ludwig, A., 1 May 2015, In: Journal of crystal growth. 417, p. 65-74 10 p., 22363.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of solidification and convection of NH₄Cl-H₂O solution in a water-cooled copper mold
Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 247-252 6 p. (Materials Science Forum; vol. 790-791).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modelling Al-4wt.%Cu as-cast structure using equiaxed morphological parameters deduced from in-situ synchrotron X-ray radiography
Ahmadein, M., Wu, M., Reinhart, G. & Nguyen-Thi, H., 2016, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
2nd annual Report "A volume-Averaging Solidification Model Incorporating Dendritic Crystal Morphology: Model Description, Improvement, and Verification"
Ahmadein, M., Wu, M. & Ludwig, A., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution
Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2013. p. 247-252 6 p. (Materials Science Forum).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Numerical investigation of solidification and CET of the transparent alloy NPG-37.5 wt.% DC in microgravity “TRACE” experiment
Ahmadein, M., Wu, M., Sturz, L., Zimmermann, G. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.
Research output: Contribution to journal › Article › Research › peer-review
Published
Numerical study of the influence of mold filling conditions on the as-cast structure of Al-4 wt.% Cu ingots
Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, International Conf. on Engineering and Technology. p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots
Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Jun 2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 6, p. 2895-2903 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
"Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution
Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2013.
Research output: Contribution to conference › Poster › Research › peer-review
Published
A numerical study of the influence of pouring technique on the as-cast structure of Al-Cu ingots
Ahmadein, M., Wu, M., Schumacher, P. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2014. p. 67-72 (Materials Science Forum).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation
Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In: Materials Science and Engineering A. 608, p. 114-122 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Simulation of yield strength in Allvacspi® 718Plus™
Ahmadi, M. R., Whitmore, L., Povoden-Karadeniz, E., Stockinger, M., Falahati, A. & Kozeschnik, E., 2014, THERMEC 2013 Supplement. Trans Tech Publications, p. 7-12 6 p. (Advanced Materials Research; vol. 922).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Modeling of precipitation strengthening in Inconel 718 including non-spherical γ" precipitates
Ahmadi, M. R., Rath, M., Povoden-Karadeniz, E., Primig, S., Wojcik, T., Danninger, A., Stockinger, M. & Kozeschnik, E., 15 May 2017, In: Modelling and simulation in materials science and engineering. 25.2017, 5, 17 p., 055005.
Research output: Contribution to journal › Article › Research › peer-review
Published
Determination of the Diffusion Coefficient for CO2 in Porous Media
Ahmadi, T., 2012, 57 p.
Research output: Thesis › Master's Thesis

Previous 1 2 3 4 5 6 7 8 ...328 Next

Research Portal

Research output

Advanced filters