Jozef Keckes

151 - 200 out of 318Page size: 50

Research output

  1. 2014
  2. Published

    New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction

    Vaxelaire, N., Labat, S., Cornelius, T., Kirchlechner, C., Keckes, J., Schülli, T. & Thomas, O., 2014, In: Acta materialia. 78, p. 46-55

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Radial crystalline texture in a lyocell fibre revealed by synchrotron nanofocus wide-angle X-ray scattering

    Gindl-Altmutter, W., Eichhorn, S. J., Burghammer, M. C. & Keckes, J., 2014, In: Cellulose. p. 845-851

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Sample tilt-free characterization of residual stress gradients in thin coatings using an in-plane arm-equipped laboratory X-ray diffractometer

    Benediktovitch, A. I., Ulyanenkova, T., Keckes, J. & Ulyanenkov, A. P., 2014, In: Journal of applied crystallography. p. 1931-938

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Sputtered molybdenum films: structure and property evolution with film thickness

    Hofer, A. M., Schlacher, J., Keckes, J., Winkler, J. & Mitterer, C., 2014, In: Vacuum. 99, p. 149-152

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Strategies for fracture toughness enhancement of thin films by advanced microstructural design - Examples of bio-inspired model soft-hard crystalline -amorphous coatings systems

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  7. Published

    Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

    Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Virtual process design for highly reliable cold formed components

    Schratter, S., Keckes, J. & Buchmayr, B., 2014,

    International Science & Technology Congress OMD 2014

    .     p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2013
  10. Published

    Advanced cross-sectional characterization of hard coatings

    Tkadletz, M., Mitterer, C., Keckes, J., Rebelo De Figueiredo, M., Hosemann, P., Burghammer, M., Sartory, B. & Czettl, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Bias- and temperature-dependent strain evolution across nanocrystalline TiAlN films studied by X-ray nanodiffraction

    Riedl, A., Todt, J., Daniel, R., Steffenelli, M., Holec, D., Krywka, C., Mitterer, C. & Keckes, J., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film

    Bartosik, M., Daniel, R., Mitterer, C., Matko, I., Burghammer, M., Mayrhofer, P. H. & Keckes, J., 2013, In: Thin solid films. 542, p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001)

    Mühlbacher, M., Sartory, B., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings

    Schlögl, M., Kirchlechner, C., Paulitsch, J., Keckes, J. & Mayrhofer, P., 2013, In: Scripta materialia. 68, p. 917-920

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings

    Schlögl, M., Paulitsch, J., Keckes, J. & Mayrhofer, P. H., 2013, In: Thin solid films. 531, p. 113-118

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Interfacial and inter- diffusion studies of epitaxial TiN/Cu layers on MgO (001) - A comprehensive approach by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Keckes, J., Lu, J., Lars, H. & Mitterer, C., 2013.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    Novel TiAlN nanostructured CVD coatings with superior oxidation resistance

    Keckes, J., Todt, J., Daniel, R., Mitterer, C., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization

    Daniel, R., Keckes, J., Matko, I., Burghammer, M. & Mitterer, C., 2013, In: Acta materialia. 61, p. 6255-6266

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films

    Keckes, J., Daniel, R., Mitterer, C., Matko, I., Sartory, B., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013, In: Thin solid films. 545, p. 29-32

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Triaxial Residual Stresses in Thermomechanically Rolled Seamless Tubes characterized by High-Energy Synchrotron X-Ray diffraction

    Winter, G., Stefenelli, M., Klarner, J., Staron, P., Fischer, T., Keckes, J. & Buchmayr, B., 2013,

    Proceedings of the2013 ASME Pressure Vessels & Piping Conference

    .     p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: a critical comparison

    Steffenelli, M., Todt, J., Riedl, A., Ecker, W., Müller, T., Daniel, R., Burghammer, M. & Keckes, J., 2013, In: Journal of applied crystallography. 46, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2012
  23. Published

    All-cellulose composites prepared from flax and lyocell fibres compared to epoxy–matrix composites

    Gindl-Altmutter, W., Keckes, J., Plackner, J., Liebner, F., Englund, K. & Laborie, M.-P., 2012, In: Composites science and technology. p. 1304-1309

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    A novel approach for determining fracture toughness of hard coatings on the micrometer scale

    Riedl, A., Daniel, R., Steffenelli, M., Schöberl, T., Kolednik, O., Mitterer, C. & Keckes, J., 2012, In: Scripta materialia. 67, p. 708-711

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A two-dimensional waveguide beam for X-ray nanodiffraction

    Krywka, C., Neubauer, H., Priebe, M., Salditt, T., Keckes, J., Buffet, A., Roth, S. V., Doehrmann, R. & Mueller, M., 2012, In: Journal of applied crystallography. 45.20212 , Part 1, p. 85-92 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Biomimetik design for cell-contacting surfaces-The topographical influences on cell-biomaterial interaction and plasma-based fabrication methods for self-adapted nanostructures

    Lackner, J. M., Waldhauser, W., Schmied, F., Teichert, C., Keckes, J. & Kreith, J., 2012, Nanostructural materials for implants and cardiovascular biomedical devices. p. 33-66

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Expected and unexpected plastic behavior at the micron scale: An in situ μLaue tensile study

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Keckes, J., Micha, J.-S., Ulrich, O., Thomas, O., Labat, S., Motz, C. & Dehm, G., 2012, In: Acta materialia. 60, p. 1252-1258

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings

    Schalk, N., Mitterer, C., Keckes, J., Penoy, M. & Michotte, C., 2012, In: Surface & coatings technology. 209, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Investigation of reversible plasticity in a micron-sized, single crystalline copper bending beam by X-ray µLaue diffraction

    Kirchlechner, C., Grosinger, W., Kapp, M. W., Imrich, P. J., Micha, J.-S., Ulrich, O., Keckes, J., Dehm, G. & Motz, C., 2012, In: Philosophical magazine. p. 3231-3242

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal

    Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Quantum mechanically guided design of Co43Fe20Ta5.5X31.5 (X=B, Si, P, S) metallic glasses

    Hostert, C., Music, D., Bednarcik, J., Keckes, J. & Schneider, J. M., 2012, In: Journal of physics (Condensed matter). p. 175402-175411

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Structure related stress gradients in thin nanocrystalline films revealed by X-ray nanodiffraction

    Daniel, R., Keckes, J. & Mitterer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Thermally treated hard coatings characterized by XRD coupled with four-point bending

    Steffenelli, M., Riedl, A., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    The structure and mechanical properties of spines from the cactus Opuntia ficus-indica

    Gindl-Altmutter, W. & Keckes, J., 2012, In: BioResources. 7, 1, p. 1232-1237

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    TiO2 (100) Al2O3 (0001) interface: A first-principles study supported by experiment

    Popov, M., Spitaler, J., Mühlbacher, M., Walter, C., Keckes, J., Mitterer, C. & Draxl, C., 2012, In: Physical review : B, Condensed matter and materials physics. 86, p. 2053091-20530913

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G. A., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S. & Burghammer, M., 2012, In: Scripta materialia. 67, p. 748-751

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2011
  38. Published

    Ab initio molecular dynamics model for density, elastic properties and short range order of Co–Fe–Ta–B metallic glass thin films

    Hostert, C., Music, D., Bednarcik, J., Keckes, J., Kapaklis, V., Hjövarsson, B. & Schneider, J. M., 2011, In: European physical journal B, Condensed matter physics : EPJ B. p. 4754011-4754017

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds

    Veigel, S., Müller, U., Keckes, J., Obersriebnig, E. M. & Gindl-Altmutter, W., 2011, In: Cellulose. p. 1227-1237

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Decomposition pathways in age hardening of Ti-Al-N films

    Rachbauer, R., Massl, S., Stergar, E., Holec, D., Kiener, D., Keckes, J., Patscheider, J., Stiefel, M., Leitner, H. & Mayrhofer, P. H., 2011, In: Journal of applied physics. 110, p. 023515-1-023515-10

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Dislocation storage in single slip oriented Cu micro-tensile samples: New insights by X-ray microdiffraction

    Kirchlechner, C., Kiener, D., Motz, C., Labat, S., Vaxelaire, N., Perroud, O., Micha, J.-S., Ulrich, O., Thomas, O., Dehm, G. & Keckes, J., 2011, In: Philosophical magazine. 91, p. 1256-1264

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars

    Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J.-S., Ulrich, O. & Dehm, G., 2011, In: Acta materialia. 59, p. 5618-5626

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    In Situ High Temperature X-Ray Diffraction Reveals Residual Stress Depth-Profiles in Blasted TiN Hard Coatings

    Bartosik, M., Pitonak, R. & Keckes, J., 2011, In: Advanced engineering materials. p. 705-711

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    In situ µLaue: Instrumental setup for the deformation of micron sized samples

    Kirchlechner, C., Keckes, J., Micha, J.-S. & Dehm, G., 2011, In: Advanced engineering materials. 13, p. 837-844

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Local structure around nano-clay agglomerates in PP composites – a scanning X-Ray diffraction study with sub micron resolution

    Feuchter, M., Maier, G. A., Burghammer, M., Kracalik, M., Laske, S., Keckes, J. & Pinter, G., 2011, European Polymer Congress 2011. p. 515-515

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Nano-Beam X-ray Diffraction as a Tool to Characterize Gradients of Microstructure and Residual Stress in Nanocrystalline Hard Coatings

    Bartosik, M., Daniel, R., Mitterer, C., Schoeder, S., Burghammer, M. & Keckes, J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Nano-beam-x-ray diffraction reveals strain, composition, texture and crystal size gradients across nano-crystalline thin films

    Keckes, J., Daniel, R., Bartosik, M., Mitterer, C., Schoeder, S. & Burghammer, M., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Polymers characterized using in-situ laboratory saxs/waxs coupled with mechanical tests

    Feuchter, M., Keckes, J. & Maier, G. A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model

    Daniel, R., Holec, D., Bartosik, M., Keckes, J. & Mitterer, C., 2011, In: Acta materialia. 59, p. 6631-6645

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Stress design of hard coatings

    Daniel, R., Keckes, J. & Mitterer, C., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Temperature induced structural gradients in multilayer coatings revealed by position resolved XRR and GISAXS

    Maier, G., Kreith, J., Chitu, L., Siffalovic, P., Michaelsen, C. & Keckes, J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    µLaue: Compression studies on miniaturised Copper single crystals

    Kirchlechner, C., Kapp, M., Motz, C., Grosinger, W., Keckes, J., Micha, J.-S., Ulrich, O. & Dehm, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. 2010
  54. Published

    3D strain imaging in sub-micrometer crystals using cross-reciprocal space measurements: Numerical feasibility and experimental methodology

    Vaxelaire, N., Labat, S., Chamard, V., Thomas, O., Jaques, V., Picca, F., Ravy, S., Kirchlechner, C. & Keckes, J., 2010, In: Nuclear instruments & methods in physics research / B Beam interactions with materials and atoms. p. 388-393

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Development of intrinsic and thermal components of residual stress in nanostructured thin films: Grain size dependent phenomena

    Daniel, R., Keckes, J. & Mitterer, C., 2010, Proceedings 8th European Conference on Residual Stresses. p. 15-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Latest Research Output

View more (318)