Montanuniversität

Organisational unit: University

601 - 700 out of 33,835Page size: 100

Research output

  1. 2024
  2. Published

    Recycling of red mud from the aluminium industry

    Wibner, S., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  3. Published

    ReSoURCE: Refractory Sorting Using Revolutionizing Classification Equipment

    Friedrich, K., 23 May 2024, p. 5. 1 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Textured surfaces in tribology: Surface modifications in full film and mixed lubrication

    Scharf, R., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Additive Manufacturing Material Extrusion @ Institute of Polymer Processing: Alf³

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Additive Manufacturing of Aluminium by Material Extrusion MEX

    Momeni, V., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Chemitecture: Dielectric Elastomer Actuator (DEA) produced by Material Extrusion (MEX)

    Raguz, I., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Closing the circle of polyolefin packaging: Pack2Loop

    Krempl, N., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  9. Published

    E-Beam Treatment of Post Consumer Polymer Waste: Increasing the melt viscosity of post-consumer polypropylene

    Krämer, J., 22 May 2024.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Extrusion and Additive Manufacturing@ Institute of Polymer Processing

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  11. Published

    LightCycle: Upcycling of regenerates with a new Injection Moulding Compounder (IMC)

    Shahroodi, Z., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Material Data Determination @ Institute of Polymer Processing

    Duretek, I., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Projekt ReSoURCE - Refractory Sorting using Revolutionizing Classification Equipment

    Feucht, F., 22 May 2024.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Recycling Biobased Plastics: C-PlaNet

    Main, P., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Successful Integration of Circular Economy Concepts for the Extractive Industry

    Murphy, M., Obenaus-Emler, R. & Pacher, C., 22 May 2024, Circular Economy on Energy and Natural Resources Industries : New Processes and Applications to Reduce, Reuse and Recycle Materials and Decrease Greenhouse Gases Emissions. Mora, P. & Acien Fernandez, F. G. (eds.). Springer, p. 253-267 17 p. (Sustainable Development Goal Series).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education › peer-review

  16. Published

    Wintersport Ressource Efficiency and Improved Circular Economy: WINTRUST

    Krempl, N., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Beyond Hot Air.

    Saxinger, G., Auer, M., Batterbury, S. P., Eyselein, G., Jensen, E. M., Kowasch, M., Melcher, F. & Wilson, E., 21 May 2024, Mining the connections.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Multi-proxy record of the Austrian Upper Triassic Polzberg Konservat-Lagerstätte in light of the Carnian Pluvial Episode

    Lukeneder, A., Lukeneder, P., Sachsenhofer, R., Roghi, G. & Rigo, M., 21 May 2024, In: Scientific reports (e-only). 14.2024, 1, 21 p., 11194.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Student perspectives on the Wolfsberg lithium project in Austria

    Kowasch, M., Baumann, C., Batterbury, S. P., Melcher, F., Saxinger, G. & Wilson, E., 21 May 2024, Mining the connections, Marrakech, 21-23 May 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Time for green extractivism in the EU?

    Kowasch, M., Melcher, F., Auer, M., Batterbury, S. P., Eyselein, G., Lesser, P., Saxinger, G. & Wilson, E., 21 May 2024, Mining the connections, Marrakech, 21-23 May 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Green and blue infrastructure as model system for emissions of technology-critical elements

    Trimmel, S., Spörl, P., Haluza, D., Lashin, N., Meisel, T. C., Pitha, U., Prohaska, T., Puschenreiter, M., Rückert, E., Spangl, B., Wiedenhofer, D. & Irrgeher, J., 20 May 2024, In: Science of the total environment. 934.2024, 15, 15 p., 173364.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Small-angle neutron scattering reveals high-density adsorbed hydrogen in carbon micropores at low pressures and supercritical temperature

    Stock, S., Seyffertitz, M., Kostoglou, N., Rauscher, M., Demé, B., Mitterer, C. & Paris, O., 20 May 2024.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Bio-Based Backbone for Highly Reactive Metal Alloys Feedstocks for MEX

    Holzer, C., Momeni, V., Pöhle, G., Riecker, S., Schuschnigg, S. & Kukla, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  24. E-pub ahead of print

    Magnetospheric Venus Space Explorers (MVSE) mission: A proposal for understanding the dynamics of induced magnetospheres

    Albers, R., Andrews, H., Boccacci, G., Castro Pires, V. D., Laddha, S., Lundén, V., Maraqten, N., Matias, J., Krämer, E., Schulz, L., Palanca, I. T., Teubenbacher, D., Baskevitch, C., Covella, F., Cressa, L., Moreno, J. G., Gillmayr, J., Hollowood, J., Huber, K. & Kutnohorsky, V. & 10 others, Lennerstrand, S., Malatinszky, A., Manzini, D., Maurer, M., Nidelea, D. M. A., Rigon, L., Sinjan, J., Suarez, C., Viviano, M. & Knutsen, E. W., 19 May 2024, (E-pub ahead of print) In: Acta astronautica. 221.2024, August, p. 194-205 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Simulation of the Melting Region in Additive Manufacturing Material Extrusion Dies for Highly Filled Feedstocks

    Schuschnigg, S., Hentschel, L. & Holzer, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  26. Published

    Unlocking the Potential of Recycled Polypropylene in Food Packaging

    Krempl, N., Holzer, C., Pinter, E., Frühwirth, M., Shahroodi, Z., Jahn, E., Aschermayer, F. & Gabriel, V. H., 19 May 2024. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Utilization of Charcoal Obtained from Woody Biomass in Metallurgical Processes Based on Solid–Gas Reactions

    Dornig, C., Hanke, G. & Antrekowitsch, J., 18 May 2024, In: Metals. 14.2024, 5, 13 p., 592.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Modeling solute drag during austenite–ferrite transformation with ab initio binding energies

    Bloder, B. F., Scheiber, D., Raninger, P., Ecker, W. & Antretter, T., 17 May 2024, In: Materialia. 36.2024, August, 9 p., 102128.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Thermal treatment of rock phosphate: Phosphorus recovery and production of an alternative binder component

    Gatschlhofer, C., Krammer, A., Doschek-Held, K., Steindl, F. R., Vallazza-Grengg, C. & Raupenstrauch, H., 16 May 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Aus dem ÖWAV-Präsidium: Abfallwirtschaftstagung 2024 in Wien - in der Kreislaufwirtschaft angekommen!

    Pomberger, R., 15 May 2024, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 76.2024, 5-6, p. 213 1 p.

    Research output: Contribution to journal › Letter

  31. Published

    Empowering the Regional Network of Experts for Disaster Risk Management in the Western Balkans by the Scientific-Professional Society for Disaster Risk Management

    Cvetković, V. M., 15 May 2024

    Research output: Other contribution › Research

  32. Published

    Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer waste

    Geier, J., Barretta, C., Hinczica, J., Haar, B., Bredács, M., Witschnigg, A., Mayrbäurl, E. & Oreski, G., 15 May 2024, In: Journal of applied polymer science. 141.2024, 30, 14 p., e55694.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Recovery of plastic packaging from mixed municipal solid waste. A case study from Austria

    Blasenbauer, D., Lipp, A.-M., Fellner, J., Tischberger-Aldrian, A., Stipanovic, H. & Lederer, J., 15 May 2024, In: Waste management. 180.2024, 15 May, p. 9-22 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Increasing the melt viscosity of post-consumer recycled polypropylene via E-Beam techniques

    Krämer, J., Guedes de la Cruz, G. D. C., Kern, W., Roitner, J., Witschnigg, A., Rittmannsberger, F. & Schnetzinger, K., 14 May 2024, (E-pub ahead of print) In: Radiation physics and chemistry. 222.2024, September, 6 p., 111846.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Seismic Hazard Resilience in Montenegro: A Comprehensive Qualitative Analysis of Local Preparedness and Response Mechanisms

    Cvetković, V. M., Grozdanić, G., Milanović, M., Marković, S. & Lukić, T., 14 May 2024

    Research output: Other contribution › Research

  36. Published

    In-Depth Analysis of Disaster (Risk) Management System in Serbia: A Critical Examination of Systemic Strengths and Weaknesses

    Cvetković, V. M., 13 May 2024

    Research output: Other contribution › Research

  37. Published

    Multimethod cross-sectional characterization approaching the limits of diamond monophase multilayers

    Meindlhumer, M., Grau, J., Sternschulte, H., Halahovets, Y., Siffalovic, P., Burghammer, M., Steinmüller-Nethl, D. & Keckes, J., 13 May 2024, In: Materials characterization. 212.2024, June, 15 p., 113973.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Influence of deformation, microstructure, and temperature on the fracture resistance of technically pure tungsten

    Gludovatz, B., Wurster, S., Hohenwarter, A., Hoffmann, A. & Pippan, R., 11 May 2024, In: Materials Science and Engineering: A. 902.2024, June, 11 p., 146631.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Constraining the stress field and its variability at the BedrettoLab: Elaborated hydraulic fracture trace analysis

    Bröker, K., Ma, X., Zhang, S., Doonechaly, N. G., Hertrich, M., Klee, G., Greenwood, A., Caspari, E. & Giardini, D., 10 May 2024, In: International Journal of Rock Mechanics and Mining Sciences. 178.2024, June, 17 p., 105739.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Raman Spectroscopy of carbonaceous material thermometry in the Carnic Alps (Austria, Italy)

    Rantitsch, G., 10 May 2024, In: Austrian journal of earth sciences. 117.2024, 1, p. 73-86 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Impact of thermal soil treatment on heavy metal mobility in the context of waste management

    Vollprecht, D., Sattler, T. M., Kern, J., Berrer, I. & Pomberger, R., 9 May 2024, In: Waste management & research. 42.2024, 9, p. 832 - 841 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Cu-doped perovskite-type oxides: A structural deep dive and examination of their exsolution behaviour influenced by B-site doping

    Berger, T., Drexler, H., Ruh, T., Lindenthal, L., Schrenk, F., Bock, J., Rameshan, R., Föttinger, K., Irrgeher, J. & Rameshan, C., 8 May 2024, In: Catalysis today. 437.2024, 1 July, p. 1 15 p., 114787.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Effect of mechanical recycling on short glass fibre reinforced polyamide 6,6 from post-industrial waste

    Salvi, A., Lucyshyn, T., Marano, C., Ostrowska, M., Vangosa, F. B., Dotelli, G. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 120005.

    Research output: Contribution to journal › Conference article › peer-review

  44. Published

    Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

    Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.

    Research output: Contribution to journal › Conference article › peer-review

  45. Published

    Thermodynamic Information and Evaporation Mechanism of Fe-M-C-S (M = As, Cu, Pb, Sb, Sn) Alloys for Controlling Tramp Elements in Steel

    Park, W.-B., Bernhard, M. C., Jung, C. & Kang, Y.-B., 8 May 2024, Proceedings of AISTech 2024, Columbus, Ohio, US.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Microstructure Evolution and Mechanical Properties at Ambient and Elevated Temperatures of in-situ TiB2/2219Al Matrix Composites During Cold Rolling

    Li, L., Zhou, D., Wei, C., Han, Z., LI, J., Kang, H., Guo, E., Zhang, Y., Chen, Z. & Wang, T., 7 May 2024, In: Metals and materials international. 30.2024, 10, p. 2791-2807 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

    Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., 7 May 2024, (E-pub ahead of print) In: Polymer Testing. 134.2024, May, 13 p., 108444.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Simulation of Secondary Metallurgical Processes by Using Computational Thermodynamics and Comprehensive Statistical Learning Methods

    Kavic, D., Bernhard, M. C., Rössler, R. & Bernhard, C., 7 May 2024, Proceedings of AISTech 2024, Columbus, Ohio, US.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Corrigendum to “From abandoned mines to carbon sinks: Assessing the CO2 storage capacity of Austrian low-rank coal deposits” [International Journal of Coal Geology 286 (2024) 1–13/104495]

    Safaei Farouji , M., Misch, D., Sachsenhofer, R. F., Rauscher, M. & Kostoglou, N., 6 May 2024, In: International journal of coal geology. 287.2024, 29 May, 1 p., 104520.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    High-cellulose content of in-situ Miocene fossil tree stumps and trunks from Lusatia lignite mining district, Federal Republic of Germany

    Kus, J., Dolezych, M., Schneider, W., Hower, J. C., Hofmann, T., Visiné Rajczi, E., Bidló, A., Bolodár-Varga, B., Sachsenhofer, R. F., Bechtel, A., Stojanović, K., Životić, D., Kojić, I., Mastalerz, M., Graupner, T., Lukens, W. E. & Donaldson, L., 6 May 2024, In: International journal of coal geology. 286.2024, 6 May, 41 p., 104494.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Toughness enhancement in TiN/Zr0.37Al0.63N1.09 multilayer films

    Lorentzon, M., Meindlhumer, M., Palisaitis, J., Greczynski, G., Keckes, J., Rosen, J., Hultman, L., Birch, J. & Ghafoor, N., 6 May 2024, In: Acta Materialia. 273.2024, 1 July, 14 p., 119979.

    Research output: Contribution to journal › Article › Research › peer-review

  52. E-pub ahead of print

    Cationic UV-curing of bio-based epoxidized castor oil vitrimers with electrically conductive properties

    Bergoglio, M., Palazzo, G., Reisinger, D., Porcarello, M., Kortaberria, G., Schlögl, S. & Sangermano, M., 5 May 2024, (E-pub ahead of print) In: Reactive & functional polymers. 200.2024, July, 9 p., 105936.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    Laser-induced graphene formation on different wood species: Dependence of electronic performance on intrinsic features of certain types of wood

    Lengger, S. K., Neumaier, L., Haiden, L., Feuchter, M., Griesser, T. & Kosel, J., 4 May 2024, (E-pub ahead of print) In: Sustainable Materials and Technologies. 40.2024, July, 11 p., e00936.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Evaluation of existing and introduction of new incremental crack propagation approaches in FEM

    Pletz, M., Frankl, S. M. & Schuecker, C., 3 May 2024, In: Theoretical and Applied Fracture Mechanics. 131.2024, June, 11 p., 104452.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Case study on thermal management of planar elements with various polymeric heat exchangers: experiment and simulation

    Hvozda, J., Mraz, K., Raudensky, M., Vakhrushev, A., Karimi Sibaki, E. & Bohacek, J., 2 May 2024, In: Journal of Thermal Analysis and Calorimetry. 149.2024, June, p. 5229-5238 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Design of Reversible Adhesives by Using a Triple Function of Ionic Liquids

    Wanghofer, F., Kriehuber, M., Reisinger, D., Floh, F., Wolfahrt, M. & Schlögl, S., 2 May 2024, (E-pub ahead of print) In: Macromolecular materials and engineering. 309.2024, 9, 9 p., 2400011.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Turning of high entropy alloy into high entropy carbides by modifying carbon content during reactive sintering

    Valášek, D., Pouchlý, V. & Salamon, D., 1 May 2024, In: Ceramics International. 50, 9, p. 15367-15372 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    BitKOIN – CO2-reduced binding agents through thermochemical conversion of mineral wool waste combinations

    Vydrenkova, A. & Krammer, A., May 2024.

    Research output: Contribution to conference › Poster › Research

  59. Published

    CO2 Utilization with Citizen Scientists: A Sparkling Science 2.0 Project

    Ruh, T., Messner, M., Lorenz, H. & Rameshan, C., May 2024.

    Research output: Contribution to conference › Poster › Research

  60. Published

    Design and characterization of novel Zr-Al-Fe-Y metallic glasses with nanoscale phase separation

    Singh, D., Parthiban, R., Jelinek, A., Bhattacharya, R., Chen, Z., Fellner, S., Gammer, C., Zhang, Z. & Eckert, J., May 2024, In: Materialia. 34.2024, May, 7 p., 102104.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Digging Deeper: Recycling Solutions for (Tunnel) Excavated Materials

    Findl, M. J. (Editor), Ang, I. S. (Editor), Hauzinger, E. (Editor), Galler, R. (Editor), Rückert, E. (Editor) & Sedlazeck, K. P. (Editor), May 2024.

    Research output: Contribution to conference › Poster › Research

  62. Published

    Digging Deeper: Recycling Solutions for (Tunnel) Excavated Materials: Nachhaltige Nutzung von Aushubmaterialien des Tief- & Tunnelbaus mithilfe sensorgestützter Technologien

    Findl, M. J. (Editor), Ang, I. S. (Editor), Hauzinger, E. (Editor), Galler, R. (Editor), Rückert, E. (Editor) & Sedlazeck, K. P. (Editor), May 2024.

    Research output: Contribution to conference › Poster › Research

  63. Published

    Exploring Multifaceted Factors Influencing Community Resilience to Earthquake-Induced Geohazards: Insights from Montenegro

    Grozdanić, G. & Vladimir, C. M., May 2024, (Scientific-Professional Society for Disaster Risk Management)

    Research output: Book/Report › Book › Research

  64. Published

    GECCO2 - Recycling of mineral residues in geopolymer-materials

    Ratz, B., May 2024.

    Research output: Contribution to conference › Poster › Research

  65. Published

    Hydrogenation/Dehydrogenation kinetics of magnesium-based metal powders originating from different process routes

    Vigl, E., Eisbacher-Lubensky, J., Kittinger, F., Weiß, C., Dopler, M., Schäffler, P., Edinger, S., Dimopoulos, T. & Gneiger, S., May 2024.

    Research output: Contribution to conference › Poster › Research

  66. Published

    Hydrogen from Methane Pyrolysis in Liquid Metals: A promising alternative for a sustainable energy transition

    Scheiblehner, D., May 2024.

    Research output: Contribution to conference › Poster › Research

  67. Published

    Large-scale experimental research in waste management: WASTE SCANNER and DIGITAL WASTE RESEARCH LAB

    Kandlbauer, L., May 2024.

    Research output: Contribution to conference › Poster › Research

  68. Published

    Method development for digital waste analysis for digital waste analysis for non-hazardous mixed commercial waste

    Kandlbauer, L., May 2024.

    Research output: Contribution to conference › Poster › Research

  69. Published

    Neuartige Sensoren und digitale Innovationen zur kontinuierlichen Prozessüberwachung am Beispiel von Schwingsieben

    Krukenfellner, P. & Flachberger, H., May 2024, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 190/2024, 05-06, p. 11 1 p.

    Research output: Contribution to journal › Article › Research

  70. Published

    Prediction of thermal shock induced cracking in multi-material ceramics using a stress-energy criterion

    Papšík, R., Sevecek, O., Schlacher, J. & Bermejo Moratinos, R., May 2024, In: Engineering Fracture Mechanics. 303, 110121.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    The Efficiency of Disaster and Crisis Management Policy at the Local Level: Lessons from Serbia

    Tanasic, J. & Vladimir, C. M., May 2024, (Scientific-Professional Society for Disaster Risk Management, Belgrade)

    Research output: Book/Report › Book › Research

  72. Published

    Walk the line: Erfolgsfaktor Citizen Science

    Maurer, J., Längauer, J., Duboc, O., Hascher, C., Irrgeher, J., Prohaska, T., Puschenreiter, M., Schober, M., Teschler-Nicola, M. & Pieler, F., May 2024, Im Bestand. Sammlungswissenschaftliche Einblicke.: Tätigkeitsbericht 2023 der Landessammlungen Niederösterreich und des Zentrums für Museale Sammlungswissenschaften.. Laussegger, A. & Sam, S. (eds.). St. Pölten, Vol. 10. p. 32-35 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  73. Published

    Developing a prediction model in a lightweight packaging waste sorting plant using sensor-based sorting data combined with data of external near-infrared and LiDAR sensors

    Schlögl, S., Kamleitner, J., Kröll, N., Chen, X., Vollprecht, D. & Tischberger-Aldrian, A., 30 Apr 2024, In: Waste management & research. 42.2024, 9, p. 747-758 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Usefulness of Lumped Kinetic Modeling

    Lorbach, S.-M., Lechleitner, A., Zapf, F. & Lehner, M., 30 Apr 2024, In: Chem & bio engineering. 1.2024, 7, p. 623–632 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process

    Legenstein, A. & Fauster, E., 29 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 3, 17 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  76. E-pub ahead of print

    Investigation of probable squat growth from initial surface cracks in rails using a three-dimensional rollover simulation

    Gschwandl, T. J., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., 29 Apr 2024, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 238.2024, 4, p. 406-413 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. E-pub ahead of print

    Peculiarity of hydrogen absorption in duplex steels: Phase-selective lattice swelling and stress evolution

    Pogrielz, T., Eichinger, M., Weiser, A., Todt, J., Hohenwarter, A., Ascii, A., Sarac, B., Brandl, D., Ressel, G., Jary, M., Dlouhý, A., Mori, G. K. & Keckes, J., 27 Apr 2024, (E-pub ahead of print) In: Scripta Materialia. 248.2024, 15 July, 7 p., 116142.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Modeling Desiccation Cracks in Opalinus Clay at Field Scale with the Phase-Field Approach

    Cajuhi, T., Ziefle, G., Massmann, J., Nagel, T. & Yoshioka, K., 26 Apr 2024, In: InterPore Journal. 1.2024, 1, 29 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    The Geodynamic Significance of Continental UHP Exhumation: New Constraints From the Tso Morari Complex, NW Himalaya

    Bidgood, A., Parsons, A., Roberts, N., Waters, D., Tapster, S. & Gopon, P., 26 Apr 2024, In: Tectonics. 43.2024, 5, 31 p., e2023TC007976.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Metallographic Etching of Al–Mg–Zn–(Cu) Crossover Alloys

    Samberger, S., Kremmer, T., Stemper, L., Tourey, S., Uggowitzer, P. & Pogatscher, S., 25 Apr 2024, In: Advanced engineering materials. 26.2024, 19, 7 p., 2400576.

    Research output: Contribution to journal › Article › Research › peer-review

  81. E-pub ahead of print

    Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)stability

    Klingler, A., Reisinger, D., Schlögl, S., Wetzel, B., Breuer, U. & Krüger, J. K., 25 Apr 2024, (E-pub ahead of print) In: Macromolecules. 57.2024, 9, p. 4246-4253 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Diskutier´n und Optimier´n - Abfallwirschaftliche Konzeptionierung für Projekt ReSoURCE

    Feucht, F., Sedlazeck, K. P. & Pomberger, R., 24 Apr 2024.

    Research output: Contribution to conference › Poster › Research

  83. E-pub ahead of print

    Fracture network characterisation of the Balmuccia peridotite using drone-based photogrammetry, implications for active-seismic site survey for scientific drilling

    Menegoni, N., Panara, Y., Greenwood, A., Mariani, D., Zanetti, A. & Hetényi, G., 24 Apr 2024, (E-pub ahead of print) In: Journal of Rock Mechanics and Geotechnical Engineering. 16.2024, 10, p. 3961-3981 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    recAIcle: Prototyp für experimentelle Datenakquise und Training von ML-Modellen

    Aberger, J., Brensberger, L., Khodier, K. & Sarc, R., 24 Apr 2024.

    Research output: Contribution to conference › Poster › Research

  85. Published

    Reducing part deformation of isotactic polypropylene specimens fabricated with powder bed fusion technique through controlling crystallization behaviors

    Gao, X., Guo, J., Zhang, D., Li, J., Su, Y., Arbeiter, F. & Li, H., 24 Apr 2024, In: Journal of polymer science. 62.2024, 13, p. 3025-3037 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. E-pub ahead of print

    Evaluating Multi-target Regression Framework for Dynamic Condition Prediction in Wellbore

    Keshavarz, S., Elmgerbi, A., Vita, P. & Thonhauser, G., 23 Apr 2024, (E-pub ahead of print) In: The Arabian journal for science and engineering. 49.2024, June, p. 8953-8982 30 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. E-pub ahead of print

    Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applications

    Clute, C., Balasooriya, W., Cano Murillo, N., Theiler, G., Kaiser, A., Fasching, M., Schwarz, T., Hausberger, A., Pinter, G. & Schlögl, S., 23 Apr 2024, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 67.2024, 20 May, p. 540-552 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Community Disaster Resilience in Serbia

    Vladimir, C. M. & Šišović, V., 22 Apr 2024, (Scientific-Professional Society for Disaster Risk Management)

    Research output: Book/Report › Book › Research

  89. Published

    Investigation on the Duration of Action of Mg3N2 as a Grain Refiner for AZ80 Alloy

    Hösele, T., Neunteufl, E. & Li, J., 22 Apr 2024, In: Metals. 14.2024, 4, 11 p., 485.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Combined Fe and Sr refining of Al-Si melt strategy for fabrication of hierarchical structure Si anodes

    Ding, J., Sun, J., Ban, B., Jiang, X., Zhu, X., Mo, Z., Kratzer, M., Teichert, K. C. & Chen, J., 21 Apr 2024, In: Chemical Engineering Journal. 489.2024, 1 June, 11 p., 151488.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Selective Cu electroplating enabled by surface patterning and enhanced conductivity of carbon fiber reinforced polymers upon air plasma etching

    Rafailović, L. D., Trišović, T., Stupavská, M., Souček, P., Velicsanyi, P., Nixon, S., Elbataioui, A., Zak, S., Cordill, M. J., Hohenwarter, A., Kleber, C. & Ráheľ, J., 20 Apr 2024, In: Journal of alloys and compounds. 992.2024, 15 July, 11 p., 174569.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Imaging hydrothermal alteration with electrical resistivity tomography in La Soufrière de Guadeloupe volcano

    Mendieta, A., Rosas-Carbajal, M., Bajou, R., Baud, P., Deroussi, S., Esposti Ongaro, T., Komorowski, J.-C., Kushnir, A., Villeneuve, M. C. & Heap, M. J., 19 Apr 2024.

    Research output: Contribution to conference › Poster › Research

  93. Published

    Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing

    Cazin, I., Ocepek, M., Kecelj, J., Stražar, A. S. & Schlögl, S., 19 Apr 2024, In: Materials. 17.2024, 8, 13 p., 1890.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study

    Teenakul, K., Alem, S. A. A., Gond, R., Thakur, A., Anasori, B. & Khataee, A., 19 Apr 2024, In: RSC Advances. 14.2024, 18, p. 12807-12816 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Polymer Processing Bringing Together Polymers, Metals and Ceramics

    Holzer, C., 18 Apr 2024.

    Research output: Contribution to conference › Abstract

  96. Published

    Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion Moulding

    Rathfelder, S., Schuschnigg, S., Kukla, C., Holzer, C. & Burkhardt, C., 18 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 2, 19 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Seismic while drilling with a diamond drill bit in project DIVE DT-1B borehole in the Ivrea-Verbano Zone (Western Alps, Italy)

    Trabi, B., Bleibinhaus, F. & Greenwood, A., 17 Apr 2024.

    Research output: Contribution to conference › Poster › Research

  98. Published

    Harmonization of Soft Power and Institutional Skills: Montenegro’s Path to Accession to the European Union in the Environmental Sector

    Sudar, S., Cvetković, V. M. & Ivanov, A., 16 Apr 2024

    Research output: Other contribution › Research

  99. Published

    Mapping elemental solutes at sub-picogram levels during aqueous corrosion of Al alloys using diffusive gradients in thin films (DGT) with LA-ICP-MS

    Mukhametzianova, G., Wagner, S., Eskinja, M., Moshtaghi, M., Mori, G. K. & Prohaska, T., 16 Apr 2024, In: Analytical and bioanalytical chemistry. 416.2024, June, p. 3373–3388 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Two-phase flow Thermo-Hydro-Mechanical (THM) modelling for a water flooding field case

    Liu, Y., Zhang, F., Weng, D., Liang, H., He, C. & Yoshioka, K., 16 Apr 2024, In: Rock Mechanics Bulletin. 3.2024, 3, 10 p., 100125.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Effect of Nb incorporation in Mo2BC coatings on structural and mechanical properties—Ab initio modelling and experiment

    Zenisek, J., Soucek, P., Ondračka, P., Czigány, Z., Buršíková, V., Holec, D., Balazsi, K. & Vasina, P., 15 Apr 2024, In: Acta materialia. 268.2024, 15 April, 12 p., 119741.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...3 4 5 6 7 8 9 10 ...339 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402