Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

501 - 600 out of 4,192Page size: 100

Research output

  1. 2022
  2. Published

    Modeling Stiffness Degradation of Fiber-Reinforced Polymers Based on Crack Densities Observed in Off-Axis Plies

    Drvoderic, M., Pletz, M. & Schuecker, C., Jan 2022, In: Journal of composites science. 6.2022, 1, 15 p., 6010010.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A “close-then-heal” approach based on shape memory effect to improve the healing efficiency of thiolacrylate dynamic networks

    Alabiso, W., Hron, T., Reisinger, D., Bautista-Anguís, D. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Addressing the challenges in frontal curing of high-performance carbon fiber reinforced composites

    Malik, M. S., Grasser, V., Wolfahrt, M., Schlögl, S. & Pinter, G. G., 2022, Proceedings of the 20th European Conference on Composite Materials - Composites Meet Sustainability. Vol. Vol. 1 - 6. p. 587 593 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Advancing photocurable resin formulations for dual-wavelength digital light processing 3D printing

    Sebalj, N., Cazin, I., Schlögl, S., Berer, M., Sangermano, M. & Fleisch, M., 2022.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Anti-adhesive coating with visibility-on-demand properties for quality control

    Bandl, C., Müller, M., Kern, W. & Krempl, N., 2022.

    Research output: Contribution to conference › Poster › Research

  7. Published

    A photolatent organophosphate for the local activation of dynamic exchange reactions in 3D printed photopolymers

    Dertnig, C. A., Guedes de la Cruz, G. D. C., Neshchadin, D., Schlögl, S. & Grießer, T., 2022.

    Research output: Contribution to conference › Poster › Research

  8. Published

    A Simulation-Based Assessment of Print Accuracy for Microelectronic Parts Manufactured with DLP 3D Printing Process

    Thalhamer, A., Fuchs, P., Strohmeier, L., Hasil, S. & Wolfberger, A., 2022, 2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022. Institute of Electrical and Electronics Engineers, (2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    A systematic investigation of fracture in polyamide 12

    Messiha, M., 2022

    Research output: Thesis › Doctoral Thesis

  10. Published

    Bio-based epoxy resin for flexible and biodegradable bio-composites

    Schwaiger, M., Feuchter, M. & Resch-Fauster, K., 2022, Biopol-2022: Conference Proceedings. p. 43 188 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Chalcone [2+2] cycloaddition for λ-orthogonal dual-cure photopolymers

    Müller, S. M., Nelson, B., Schlögl, S. & Grießer, T., 2022.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Challenges in the use of highly birefringent fiber bragg gratings for strain sensing in composites

    Wachtarczyk, K., Bender, M., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  13. Published

    Contact Lenses - Materials, Chemicals, Methods and Applications

    Fink, J., 2022

    Research output: Book/Report › Book › Research

  14. Published

    Controlled UV-mediated activation of dynamic exchange reactions in vitrimeric polymers by exploiting thermally stable photolatent bases

    Reisinger, D., Kaiser, S., Rossegger, E., Alabiso, W., Dietliker, K., Sangermano, M. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  15. Published

    DETERMINATION OF A RACETRACKING PASS-FAIL CRITERION FOR EDGE FLOW PERMEABILITY MEASUREMENT

    George, A., Huntsman, M., Koorevaar, A., Fauster, E. & May, D., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 733-740 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Determining the surface tack of medical gloves

    Amirosanloo, S., Schlögl, S., Maroh, B., Schaller, R., Beglari, R. & Holzner, A., 2022.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Development of Conductive Polymer Composites for the Material Extrusion of Dielectric Elastomer Actuators

    Steinert, T., 2022

    Research output: Thesis › Master's Thesis

  18. Published

    Development of degradable polymer networks

    Sölle, B., Rossegger, E., Trimmel, G. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  19. Published

    DEVELOPMENT OF NOVEL MATRIX MATERIALS FOR TYPE V HYDROGEN GAS PRESSURE VESSELS

    Wanghofer, F., Wolfahrt, M., Wolfberger, A. & Schlögl, S., 2022, Applications and Structures. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 260-265 6 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    DEVELOPMENT OF NOVEL POLYMERIC MATERIAL GRADES AND EXPERIMENTAL METHODS TO BE USED IN HIGH-PRESSURE H2 GAS ATMOSPHERES

    Balasooriya, W., Clute, C., Halder, K., Theiler, G., Hausberger, A. & Pinter, G., 2022, Proceedings of WHEC 2022 - 23rd World Hydrogen Energy Conference: Bridging Continents by H2. Dincer, I., Colpan, C. O. & Ezan, M. A. (eds.). p. 491-493 3 p. (Proceedings of WHEC 2022 - 23rd World Hydrogen Energy Conference: Bridging Continents by H2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Development of reworkable adhesives for automotive bonding applications

    Bautista-Anguís, D., Reiner, L., Wolfberger, A. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Dynamic Mechanical Response in Epoxy Nanocomposites Incorporating Various Nano-Silica Architectures

    Chaudhary, S., Vryonis, O., Vaughan, A. S., Andritsch, T. & Feuchter, M., 2022, ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings. Institute of Electrical and Electronics Engineers, p. 86-89 4 p. (ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Einfluss der Grenzflächeneigenschaften auf die mechanischen Eigenschaften von kurzfaserverstärkten Verbunden

    Cwioro, T., 2022

    Research output: Thesis › Master's Thesis

  24. Published

    Entwicklung eines Prüfaufbaus zur Bestimmung der biologischen Abbaubarkeit von Biokunststoffen

    Novak, P., 2022

    Research output: Thesis › Master's Thesis

  25. Published

    Environmental stress cracking of high-impact polystyrene and polycarbonate polyurethane in application-oriented media

    Huemer, M., 2022

    Research output: Thesis › Master's Thesis

  26. Published

    Erfassung relevanter Prozessgrößen für die modellgestützte Qualitätsprognose spritzgegossener Bauteile

    Pauer, M., 2022

    Research output: Thesis › Master's Thesis

  27. Published

    EXPERIMENTAL CHARACTERIZATION OF TRANSVERSE FABRIC COMPRESSIBILITY BY MEANS OF IN-SITU-IMPREGNATION

    Bender, M. & Fauster, E., 2022.

    Research output: Contribution to conference › Paper

  28. Published

    Filamentbasierter 3D-Druck für Metalle, Hartmetalle und Cermets

    Kukla, C., Duretek, I. & Lengauer, W., 2022, Pulvermetallurgie in Wissenschaft und Praxis: Pulvermetallurgie - vielfältige Prozesse und Werkstoffe. Broeckmann, C., Danninger, H. & Kaletsch, A. (eds.). Vol. 37. p. 75-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Fillers and elastomers for high-pressure hydrogen gas applications

    Clute, C., Balasooriya, W., Schlögl, S., Kerschbaumer, R. C. & Hausberger, A., 2022.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Hydrophobic coating encompassing visibility-on-demand for smart and rapid quality control

    Bandl, C., 2022.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry

    Yadav, N. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Abstract

  32. Published

    Influence of cure-induced shrinkage of pre-impregnated woven glass fiber fabrics on the temperature- and direction-dependent deformation of composites measured by digital image correlation

    Sagerer, M., 2022

    Research output: Thesis › Master's Thesis

  33. Published

    Influence of Recyclates on Mechanical Properties and Lifetime Performance of Polypropylene Materials

    Hinczica, J., Messiha, M., Koch, T., Frank, A. & Pinter, G., 2022, 23rd European Conference on Fracture, ECF 2022. Moreira, P. & Reis, L. (eds.). Elsevier B.V., p. 139-146 8 p. (Procedia Structural Integrity; vol. 42).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Inline NDT for thermoplastic Automated Tape Layup

    Yadav, N., Oswald-Tranta, B. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Poster › Research

  35. Published

    Introducing a visibility-on-demand property to an anti-adhesive coating. A smart approach for quality control

    Bandl, C., Kern, W. (Co-editor), Müller, M. (Co-editor) & Krempl, N. (Co-editor), 2022.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Investigations on surface-tethered germanium based photoinitiators

    Müller, M., Kern, W. (Co-editor), Bandl, C. (Co-editor), Haas, M. (Co-editor) & Drusgala, M. (Co-editor), 2022.

    Research output: Contribution to conference › Poster › Research

  37. Published

    LIFE TIME ESTIMATION OF 3D-PRINTED CONTINUOUS FIBER REINFORCED PARTS UNDER FATIGUE LOADING

    Primetzhofer, A., Petermann, S., Dietsch, R., Leßlhumer, J., Arbeiter, F. & Pinter, G., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 791-797 7 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Machine Learning Based Tape Width Prediction for the Thermoplastic Automated Tape Placement Process

    Legenstein, A. & Schledjewski, R., 2022, Composites meet Sustainability – Proceedings of the 20th European Conference on Composite Materials. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Manufacture of medical gloves by NR- and XNBR-latex vulcanization using UV-crosslinking techniques to avoid Type IV latex allergy

    Grabmayer, T., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2022.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Manufacture of Surgical and Examination Gloves using UV-Techniques by Crosslinking Diene Rubber Latices to Avoid Allergenic Reactions caused by classic Accelerator Chemicals

    Grabmayer, T., Schlögl, S., Schaller, R., Holzner, A. & Kern, W., 2022.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Mechanical integrity of cranial implants produced via material extrusion-based additive manufacturing

    Petersmann, S., 2022

    Research output: Thesis › Doctoral Thesis

  42. Published

    Monitoring of thermoplastic composites with an FBG inscribed in highly-birefringent optic fiber

    Wachtarczyk, K., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  43. Published

    Multimaterial spatial control of the mechanical properties of 3D printed objects by vat photopolymerization

    Cazin, I., Gleirscher, M., Fleisch, M., Sangermano, M., Sangermano, M. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  44. Published

    NDE optical based methods for liners assessment for hydrogen storage

    Wachtarczyk, K., Gąsior, P., Kaleta, J. & Yadav, N., 2022.

    Research output: Contribution to conference › Poster › Research

  45. Published

    New approaches towards reinforced elastomer composites by in-situ crosslinking of functional resins

    Strohmeier, L., 2022

    Research output: Thesis › Doctoral Thesis

  46. Published

    Novel fracture mechanics concepts in elastomer fatigue to model the influence of temperature

    Schieppati, J., 2022

    Research output: Thesis › Doctoral Thesis

  47. Published

    Porous Plastics

    Fink, J., 2022

    Research output: Book/Report › Book › Research

  48. Published

    Prediction of the failure behaviour in steel cable reinforced rubber components using the Finite Element Method

    Frankl, S. M., 2022

    Research output: Thesis › Doctoral Thesis

  49. Published

    Produkt-adaptive Regelung des Kautschukspritzgießens

    Traintinger, M., 2022

    Research output: Thesis › Doctoral Thesis

  50. Published

    Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor

    Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor

    Yadav, N., 2022.

    Research output: Contribution to conference › Abstract

  52. Published

    Simulation der viskosen Dissipation in einem Mikrokanal

    Itzlinger, J., 2022

    Research output: Thesis › Master's Thesis

  53. Published

    Simulations of the filament printing of metal feedstocks with different nozzle designs

    Schuschnigg, S., Hubmann, M., Cano Cano, S., Hentschel, L., Holzer, C. & Gonzalez-Gutierrez, J., 2022, Proceedings of the WorldPM 2022, Lyon.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Soft composites from bio-based resources

    Schwaiger, M., Bender, M., Taesler, J., Schirmer, H. & Resch-Fauster, K., 2022, Proceedings of the 20th European Conference on Composite Materials - Composites meet sustainability.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Spatially controlling the mechanical properties of 3D printed objects by dual-wavelength digital light processing

    Cazin, I., Gleirscher, M., Fleisch, M., Berer, M., Sangermano, M. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  56. Published

    State of the Art Modelle der Reaktionskinetik auf dem Prüfstand: Experimentelle Validierung der Approximation der Vernetzungskurve auf Basis Dynamisch-Mechanischer Analysemethoden an Kautschukbauteilen

    Hornbachner, M., 2022

    Research output: Thesis › Master's Thesis

  57. Published

    Stress- and Strain-based Fatigue Life Calculation for Short Fiber Reinforced Polymers by Use of fe-safe

    Kaylani, D., 2022

    Research output: Thesis › Master's Thesis

  58. Published

    Structure-property relationships of thiol–acrylate based vitrimers: From liquid resins to additive manufacturing of self-healable devices

    Shaukat, U., Rossegger, E. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  59. Published

    Synthesis and Characterization of 3D-Printable Epoxy-Based Vitrimers

    Höller, R., 2022

    Research output: Thesis › Master's Thesis

  60. Published

    Synthesis and characterization of bisimidazole-based ionenes for high pressure gas storage applications

    Florian, W., Kanatschnig, E. E., Wolfberger, A., Wolfahrt, M., Rossegger, E. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  61. Published

    Synthesis and characterization of thermoplastic ionenes as candidates for liner materials in hydrogen pressure vessels

    Kanatschnig, E. E., 2022

    Research output: Thesis › Master's Thesis

  62. Published

    Synthesis of green degradable thermosets from bioderived resources

    Sölle, B., Rossegger, E., Trimmel, G. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  63. Published

    Synthesis of thermally latent bases for applications in polymeric self-healing materials

    Kriehuber, M., Reisinger, D. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  64. Published

    Systematische Bewertung der Kurzzeitstabilität von Spritzgießprozessen in einer flexiblen, vernetzten Produktion

    Handl, D., 2022

    Research output: Thesis › Master's Thesis

  65. Published

    Tactile friction of UV-curable coatings and its relation to surface hardness

    Ules, T., Grießer, M., Schlögl, S. & Gruber, D. P., 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  66. Published

    Termination criteria for fatigue tests of continuous fiber reinforced polymers

    Gfrerrer, M., Wiener, J., Schneider, C., Brunner, A. J. & Pinter, G. G., 2022, Proceedings of the 20th European Conference on Composite Materials: Composites meet sustainability. Vol. 3. p. 502 - 508

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Thermally stable photolatent bases for a spatially resolved activation of dynamic exchange reactions in vitrimeric polymers

    Reisinger, D., Rossegger, E., Alabiso, W., Dietliker, K., Sangermano, M. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  68. Published

    Thermische Aktivierung von Vitrimeren durch thermisch-latente Katalysatoren

    Kriehuber, M. U., 2022

    Research output: Thesis › Master's Thesis

  69. Published

    Thermo-catalytic degradation of PFPE lubricants for space applications

    Gleirscher, M., Wolfberger, A., Hausberger, A., Schlögl, S., Helfer, E., Oreski, G. & Hołyńska, M., 2022.

    Research output: Contribution to conference › Poster › Research

  70. Published

    The role of catalyst on the dual-wavelength 3D printing of vitrimers with locally controllable shape memory properties

    Shaukat, U., Rossegger, E., Moazzen, K., Fleisch, M., Berer, M., Alabiso, W. & Schlögl, S., 2022.

    Research output: Contribution to conference › Poster › Research

  71. Published

    Tribological Method Development of Abrasive Resistant Polymer Coatings for Industrial Applications

    Tockner, M., Wolfberger, A., Huang, Y., Hausberger, A. & Pinter, G. G., 2022, In: Tribologie und Schmierungstechnik. 69.2022, 5-6, p. 34-42 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Verbundwerkstoffe auf Basis vitrimerer Polymersysteme: Verarbeitungsverhalten und Umformanalyse

    Stryzek, M., 2022

    Research output: Thesis › Master's Thesis

  73. 2021
  74. Published

    In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Gąsior, P., Kaleta, J., Anuszkiewicz, A., Bender, M., Schledjewski, R., Mergo, P. & Osuch, T., 31 Dec 2021, In: Materials. 15.2022, 1, 16 p., 77.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    GEBIRGSANKER MIT SENSOR ZUR MESSUNG MECHANISCHER SPANNUNG

    Feiel, S. (Inventor), Kern, W. (Inventor), Griesser, T. (Inventor) & Moser, P. (Inventor), 29 Dec 2021, IPC No. E21D 21/ 02 A I, Patent No. EP3927942, Priority date 6 Feb 2020, Priority No. WO2020EP53028

    Research output: Patent

  76. Published

    Relationships between the Decomposition Behaviour of Renewable Fibres and Their Reinforcing Effect in Composites Processed at High Temperatures

    Slapnik, J., Lucyshyn, T. & Pinter, G., 18 Dec 2021, In: Polymers. 13.2021, 24, 16 p., 4448.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    MFR-Messungen von einem thermoplastischen Compound

    Duretek, I., 17 Dec 2021, 3 p.

    Research output: Book/Report › Commissioned report › Research

  78. Published

    Instrumentation of an Inspection Test Rig for Geometry Measurement of Fiber Bundles in Automated Composite Manufacturing

    Neunkirchen, S., Fauster, E., Lehner, S. & O'Leary, P., 13 Dec 2021, In: IEEE transactions on instrumentation and measurement. 71

    Research output: Contribution to journal › Special issue › Research › peer-review

  79. Published

    The potential of a mine-wide digital rock mass condition monitoring system

    Nöger, M., Hartlieb, P., Ladinig, T., Moser, P., Grießer, T. & Dendl, D., 9 Dec 2021.

    Research output: Contribution to conference › Paper › peer-review

  80. Published

    Correction to: Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests (Journal of Dynamic Behavior of Materials, (2021), 7, 4, (538-552), 10.1007/s40870-021-00297-5)

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiha, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., Dec 2021, In: Journal of dynamic behavior of materials. 7, 4, p. 628 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  81. Published

    Prediction of polyethylene density from FTIR and Raman spectroscopy using multivariate data analysis

    Bredács, M., Barretta, C., Castillon, L. F., Frank, A., Oreski, G., Pinter, G. & Gergely, S., Dec 2021, In: Polymer Testing. 104.2021, December, 8 p., 107406.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Biobased Plastics for a Circular Economy

    Main, P. & Lucyshyn, T., 30 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  83. Published

    Maßgeschneiderte Sanierungsverfahren für die Tunnelentwässerung – DrainRepair

    Arbeiter, F., Schachinger, T., Wenighofer, R., Rieß, G., Steiner, M., Schoen, A., Griebaum, M., Laufer, V. & Galler, R., 30 Nov 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 12, p. 583-588 6 p.

    Research output: Contribution to journal › Article › Research

  84. Published

    Analyse von textilen Abfällen aus PET und PA6

    Duretek, I., 22 Nov 2021, 65 p.

    Research output: Book/Report › Commissioned report › Research

  85. E-pub ahead of print

    Isolable Stannenolates Enable the Synthesis of Visible-Light Photoinitiators

    Maier, J., Müller, S. M., Torvisco, A., Glotz, G., Fischer, R. C., Griesser, T., Kelterer, A. M. & Haas, M., 15 Nov 2021, (E-pub ahead of print) In: ChemPhotoChem . 6.2022, 3, 6 p., e202100213.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Cross-Linking and Evaluation of the Thermo-Mechanical Behavior of Epoxy Based Poly(ionic Liquid) Thermosets

    Wanghofer, F., Wolfberger, A., Wolfahrt, M. & Schlögl, S., 12 Nov 2021, In: Polymers. 13.2021, 22, 19 p., 3914.

    Research output: Contribution to journal › Article › Research › peer-review

  87. E-pub ahead of print

    Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene

    Li, T., Gonzalez-Gutierrez, J., Raguz, I., Holzer, C., Li, M., Cheng, P., Kitzmantel, M., Shi, L. & Huang, L., 10 Nov 2021, (E-pub ahead of print) In: Additive Manufacturing. 37.2021, January, 9 p., 101700.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Mechanical behavior of 3D-printed polymeric metamaterials for lightweight applications

    Truszkiewicz, E., Thalhamer, A., Rossegger, M., Vetter, M., Meier, G., Rossegger, E., Fuchs, P., Schlögl, S. & Berer, M., 1 Nov 2021, In: Journal of applied polymer science. 139, 6, 51618.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Effect of mechanical loading history on fatigue crack growth of non-crystallizing rubber

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G., Nov 2021, In: Engineering Fracture Mechanics. 257.2021, November, 13 p., 108010.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

    Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72.2021, November, p. 604-612 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Ölfiltergehäuse effizienter herstellen

    Berger-Weber, G., Zorn, D., Zidar, D. & Bevc, F., Nov 2021, In: Kunststoffe. 111.2021, 11, p. 48-51 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Personalised urethra pessaries prepared by material extrusion-based additive manufacturing

    Spoerk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Oct 2021, In: International Journal of Pharmaceutics. 608.2021, 25 October, 13 p., 121112.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Development of 3D-printed (FFF) devices to fight COVID-19 transmission

    Pais, A. I., Castro Pires, V., Ferreira, C., Silva, V., Alves, J. L., Bastos, J. A. & Belinha, J., 19 Oct 2021, CRC Press.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  94. Published

    RESIN COMPOSITION SUITABLE FOR PRINTING AND PRINTING METHODS

    GRIEßER, T. (Inventor), Edler, M. (Inventor), Hartmann, D. G. (Inventor) & Oesterreicher, A. B. (Inventor), 14 Oct 2021, IPC No. C09D 11/ 38 A I, Patent No. US2021317241, Priority date 18 Jul 2019, Priority No. WO2019EP69338

    Research output: Patent

  95. Published

    CrackDect: Detecting crack densities in images of fiber-reinforced polymers

    Drvoderic, M., Rettl, M., Pletz, M. & Schuecker, C., 13 Oct 2021, In: SoftwareX. 16.2021, December, 6 p., 100832.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Shape memory-assisted self-healing of dynamic thiol-acrylate networks

    Alabiso, W., Hron, T. M., Reisinger, D., Bautista-Anguís, D. & Schlögl, S., 12 Oct 2021, In: Polymer Chemistry. 12.2021, 39, p. 5704-5714 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Structure-Property Relationships of Polyamide 12 Grades Exposed to Rapid Crack Extension

    Messiha, M., Frank, A., Heimink, J., Arbeiter, F. & Pinter, G., 8 Oct 2021, In: Materials. 14.2021, 19, 12 p., 5899.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    GEGENSTAND MIT EINER BIOZIDEN BESCHICHTUNG, VERFAHREN ZUR BESCHICHTUNG EINES GEGENSTANDS UND VERWENDUNG EINER BIOZIDEN BESCHICHTUNG

    Griesser, T. (Inventor), Kern, W. (Inventor), Rockenbauer, T. (Inventor), Schwarz, R. (Inventor) & Hartmann, D. (Inventor), 7 Oct 2021, IPC No. C08J 7/ 04 A I, Patent No. WO2021198338, Priority date 2 Apr 2020, Priority No. AT20200060090

    Research output: Patent

  99. Published

    On the investigation of quasi-static crack resistance of thermoplastic tape layered composites with multiple delaminations: Approaches for quantification

    Khudiakova, A., Brunner, A. J., Wolfahrt, M., Wettemann, T., Godec, D. & Pinter, G., Oct 2021, In: Composites Part A: Applied Science and Manufacturing. 149.2021, October, 10 p., 106484.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    "Photo-switchable polymer networks"

    Elisabeth Rossegger, Grießer, T. & Schlögl, S., 30 Sept 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  101. Published

    A combined experimental and simulation-based approach towards toughness optimized polymeric multi-layer structures

    Arbeiter, F., Wiener, J., Tiwari, A., Pinter, G. G. & Kolednik, O., 28 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  102. Published

    Effect of the specimen size on the applicability of the load separation criterion in J-testing of polymers

    Gosch, A., Arbeiter, F., Berer, M., Agnelli, S., Baldi, F. & Pinter, G. G., 28 Sept 2021, Book of abstracts - 1st Virtual ESIS TC4 Conference on Fracture of Polymers, Composites and Adhesives.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 12 3 4 5 6 7 8 9 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301