Department Physics, Mechanics and Electrical Engineering

Organisational unit: Departments and Institutes

701 - 750 out of 2,058Page size: 50

Research output

  1. 2015
  2. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Verzerrungsanalyse räumlich gekrümmter Flächen auf Basis konformer Abbildungsalgorithmen

    Ritt, R., 2015

    Research output: Thesis › Master's Thesis

  4. Published

    Voraussage von wachstumsfähigen Squats ausgehend von einer Fehlstelle im Randbereich der Fahrspur einer Schiene

    Kubin, W., 2015, 73 p.

    Research output: Thesis › Diploma Thesis

  5. Published

    Wirkungsgradoptimierung einer Hochstromladeschaltung einer Lithium-Ionen-Zelle

    Ziegerhofer, H., 2015

    Research output: Thesis › Master's Thesis

  6. 2014
  7. Published

    A customizable software for fast reduction and analysis of large X-ray scattering data sets: applications of the new DPDAK package to small-angle X-ray scattering and grazing-incidence small-angle X-ray scattering

    Benecke, G., Wagermaier, W., Li, C., Schwartzkopf, M., Flucke, G., Hoerth, R., Zizak, I., Burghammer, M., Metwalli, E., Müller-Buschbaum, P., Trebbin, M., Foerster, S., Paris, O., Roth, S. V. & Fratzl, P., Oct 2014, In: Journal of applied crystallography. 47, p. 1797-1803

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Modelling the role of compositional fluctuations in nucleation kinetics

    Ženíšek, J., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 31 Jul 2014, In: Acta materialia. 91, p. 355-376

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Piezotronic Modification of Double-Schottky-Barriers in ZnO Varistor Ceramics

    Hofstätter, M., Raidl, N., Nevosad, A., Teichert, C. & Supancic, P., 16 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Rolling Contact Fatigue of Three Crossing Nose Materials—Multiscale FE Approach

    Pletz, M., Daves, W., Yao, W. & Ossberger, H., 15 Jun 2014, In: Wear. 314, 1–2, p. 69-77 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., May 2014, In: Advanced materials research. 922, p. 645-650

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    The role of phase interface energy in martensitic transformation: A lattice Monte-Carlo simulation

    Yastrebov, V. A., Fischlschweiger, M., Cailletaud, G. & Antretter, T., Mar 2014, In: Mechanics Research Communications. 56, p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    73rd IUVSTA Workshop on "Nanostructures on two-dimensional solids"

    Teichert, C. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  15. Published

    Abnormal Grain Growth: A Non-Equilibrium Thermodynamic Model for Multi-Grain Binary Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 015013-1-015013-15

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Accelerated cooling of heavy steel plates - selected aspects of modelling

    Kaltenbrunner, T., 2014

    Research output: Thesis › Diploma Thesis

  17. Published

    AFM Charakterisierung von LSC und LNO Proben

    Kreiml, P. & Teichert, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    AFM nanoindentation of pulp fibers and thin cellulose films at varying relative humidity

    Ganser, C., Hirn, U., Rohm, S., Schennach, R. & Teichert, C., 2014, In: Holzforschung : international journal of the biology, chemistry, physics and technology of wood . 68, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    AFM studies of adsorbed xylan on amorphous cellulose films using functionalized tips

    Czibula, C., Ganser, C., Miletzky, A., Spirk, S., Schennach, R. & Teichert, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Air-stable organic semiconductors based on 6,6'-dithienylindigo and polymers thereof

    Glowacki, E. D., Apaydin, D. H., Bozkurt, Z., Monkowius, U., Demirak, K., Tordin, E., Himmelsbach, M., Schwarzinger, C., Burian, M., Lechner, R. T., Demitri, N., Voss, G. & Sariciftci, N. S., 2014, In: Journal of materials chemistry / C. 2, p. 8089-8097

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    An Easy-to-Use Estimate of the Energy-Release Rate for Crack Arrays

    Fischer, F. D., Predan, J. & Kienzler, R., 2014, In: Archive of applied mechanics. 84, p. 1325-1337

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

    Gamsjäger, E., Chen, H. & van der Zwaag, S., 2014, In: Computational materials science. 83, p. 92-100

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Application of the page-equation on flat shaped viscose fibre handsheets

    Weber, F., Ganser, C., Teichert, C., Schennach, R., Bernt, I. & Eckhart, R., 2014, In: Cellulose. 21, p. 3715-3724

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Atomic Force Microscopy as a Tool to Explore Triboelectrostatic Phenomena in Mineral Processing

    Mirkowska, M., Kratzer, M., Teichert, C. & Flachberger, H., 2014, In: Chemie-Ingenieur-Technik. 86, p. 857-864

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Automated drop-on-fiber contact angle measurement using a microrobotic platform

    Saketi, P., Hirvonen, J., Ganser, C., Teichert, C., Lai, Y., Järnström, J., Fardim, P. & Kallio, P., 2014, In: Nordic pulp & paper research journal. 29, p. 225-231

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Balancing System for a 6-Cell-Lithium-Ion Battery Module Including Protection, Display, and Control Equipment

    Tian, Z., 2014, 106 p.

    Research output: Thesis › Master's Thesis

  27. Published

    Biased KPFM of two ZnO Varistors

    Kratzer, M. & Teichert, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Biased KPFM of ZnO MLVs with/without galvanization

    Kratzer, M. & Teichert, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Bioinspired composites – next generation of materials and devices

    Paris, O. & Zollfrank, C., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 121-122

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Pélisset, T., Karunamurthy, B., Otremba, R. & Antretter, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Antretter, T., Otremba, R., Karunamurthy, B. & Pélisset, T., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Characterization and Modeling of the Thermomechanical Fatigue Behavior of Brake Disks for High Speed Trains

    Raninger, P., 2014

    Research output: Thesis › Doctoral Thesis

  33. Published

    Chemically Induced Fracturing in Alkali Feldspar

    Scheidl, K. S., Schaeffer, A.-K., Petrishcheva, E., Habler, G., Fischer, F. D., Schreuer, J. & Abart, R., 2014, In: Physics and Chemistry of Minerals. 41, p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Coherent Analysis of Disordered Mesoporous Adsorbents using Small Angle X-Ray Scattering and Physisorption Experiments

    Stoeckel, D., Wallacher, D., Zickler, G., Perlich, J., Tallarek, U. & Smarsly, B., 2014, In: Physical chemistry, chemical physics : PCCP. 16, p. 6583-6592

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Comparison of Flux Switching Permanent Magnet Machines with Hybrid Excitation

    Krenn, J., Krall, R. & Aschenbrenner, F., 2014, OPTIM 2014 Proceedings. p. 338-341

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Comparison of Leakage Inductance between Fractional Slot Winding and Distributed Winding

    Krall, R., Krenn, J. & Schmid, A., 2014, PEMC 2014 Proceedings. p. 357-363

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Comparison of Torque-Speed-Characteristic of Flux Switching Machines with Permanent Magnet Excitation and Hybrid Excitation

    Krenn, J., Krall, R. & Schmid, A., 2014, APEIE. p. 779-783

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Computational simulation of instability phenomena in nanoparticles and nanofilms

    Todt, M., Toth, F., Hartmann, M., Holec, D., Cordill, M. J., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: Computational Technology Reviews. 10, p. 89-119

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Correlative microscopy of PV conversion in nanostructures for solar cells

    Fejfar, A., Hývl, M., Vetushka, A., Ledinský, M., Kocka, J., Marek, A., Vyskocil, J., Misra, S., Yu, L., Foldyna, M., Roca i Cabarrocas, P., Becker, C., Itoh, T., Varlamov, S., Kratzer, M. & Teichert, C., 2014, In Technical Digest of the 6th World Conference on Photovoltaic Solar Energy Conversion, 23 - 27. 11. 2014, Kyoto, Japan, 2014. http://www.wcpec6.com/.. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Crystal Phase Transitions in the Shell of PbS/CdS Core/Shell Nanocrystals Influences Photoluminescence Intensity

    Lechner, R. T., Popovski, G., Yarema, M., Heiss, W., Armin, H., Schülli, T., Primetzhofer, D., Eibelhuber, M. & Paris, O., 2014, In: Chemistry of materials. 26, p. 5914-5922

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Design and experimental verification of a third harmonic injection rectifier circuit using a Flying converter cell

    Hartmann, M., Fehringer, R., Makoschitz, M. & Ertl, H., 2014, APEC 2014 - 29th Annual IEEE Applied Power Electronics Conference and Exposition. Institute of Electrical and Electronics Engineers, p. 920-927 8 p. 6803418. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Determination of cyclic mechanical properties of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G. & Schöngrundner, R., 2014, Proceedings 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Determination of Depths of Multiple Traps for Interstitials and their Influence on Diffusion Kinetics

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 065015-1-16

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Determination of Mechanical Properties of Carbon Nanostructures using Computational Mechanical Tests

    Hartmann, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Diffusion of elements and vacancies in multi-component systems

    Fischer, F. D. & Svoboda, J., 2014, In: Progress in materials science. 60, p. 338-367

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Distributed Bragg Reflectors: Morphology of Cellulose Acetate and Polystyrene Multilayers

    Unger, K., Czibula, C., Resel, R., Ganser, C. & Teichert, C., 2014, PROCEEDING. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Estimation of Thermodynamic Data of Metallic Nanoparticles Based on Bulk Values

    Vollath, D. & Fischer, F. D., 2014, Metal Nanopowders: Production, Characterization, and Energetic Applications. p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Ex situ and In situ Characterization of Patterned Photoreactive Thin Organic Surface Layers Using Friction Force Microscopy

    Shen, Q., Edler, M., Grießer, T., Knall, A.-C., Trimmel, G., Kern, W. & Teichert, C., 2014, In: Scanning. 36, p. 590-598

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    FE - simulation of chip formation in inhomogeneous materials

    Distlberger, S., 2014, 144 p.

    Research output: Thesis › Diploma Thesis

  52. Published

    Formation of Bubbles by Hydrogen Attack and Elastic-Plastic Deformation of the Matrix

    Fischer, F. D. & Svoboda, J., 2014, In: International journal of plasticity. 63, p. 110-123

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...11 12 13 14 15 16 17 18 ...42 Next
View graph of relations