Department Materials Science

Organisational unit: Departments and Institutes

151 - 200 out of 5,453Page size: 50

Research output

  1. 2024
  2. Published

    A strength testing method for additively manufactured ceramics

    Lube, T., Staudacher, M., Scheithauer, U. & Schwentenwein, M., 2024.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  3. Published

    Atomistic investigations of SiC polytypes and creation of machine learning interatomic potential

    Reichmann, A., Rajabzadeh, Z., Halkali, C., Hammer, R. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Automatic etch pit detection and characterization in KOH etch images of 4H-SiC using deep learning

    Holub, G., Hofer, S., Obermüller, T. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Bestimmung mechanischer Eigenschaften einer Low Temperature Cofired Keramik

    Waidbacher, V., 2024

    Research output: Thesis › Master's Thesis

  6. Published

    BiMg2/3Nb1/3O3-based thin films from Chemical Solution Deposition: A study on the influence of the process parameters on the structure and the electrical properties

    Gindel, T., 2024

    Research output: Thesis › Master's Thesis

  7. Published

    Boron nitride nanotubes versus carbon nanotubes: A thermal stability and oxidation behavior study

    Kostoglou, N., Tampaxis, C., Charalambopoulou, G., Constantinides, G., Ryzhkov, V., Doumanidis, C. C., Matovic, B., Mitterer, C. & Rebholz, C., 2024.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Ceramic materials as an alternative for conventional spark plug electrodes

    Harrer, W. S., Gruber, M., Melcher, V., Tilz, A., Engelmayer, M., Wimmer, A. & Bermejo, R., 2024, In: International journal of applied ceramic technology. 2024, ??? Stand: 30. September 2024, p. 4393-4403

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Characterization of phase transformations and precipitation behavior in a novel Cu-enhanced near-α Ti alloy for additive manufacturing

    Obersteiner, D., Klein, T., Primig, S. & Musi, M., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Charakterisierung der Mikro- und Nanostruktur eines hochlegierten, martensitischen Cr-Stahls

    Pferschy, M., 2024

    Research output: Thesis › Master's Thesis

  11. Published

    CharAM - Mechanische Charakterisierung additiv gefertigter keramischer Bauteile

    Scheithauer, U. & Staudacher, M., 2024, 4 p. Dresden

    Research output: Other contribution › Transfer

  12. Published

    CO2 storage potential of low and medium-rank coals from Austria and Kazakhstan

    Safaei-Farouji , M., Misch, D., Sachsenhofer, R. F., Kostoglou, N., Junussov, M. & Fustic, M., 2024.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Comparison of omega particle size and interface in Ti-15Mo: APT vs. XRD

    Kozlik, J., Holý, V., Smilauerova, J. & Jelinek, A., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Designability and Versatility of Thermoplastic Forming for Bulk Metallic Glasses

    Cai, F.-F., 2024

    Research output: Thesis › Doctoral Thesis

  15. Published

    Development and Automation of a Bulge Test Procedure for Polymer Supported Thin Films

    Kuhn, A., 2024

    Research output: Thesis › Master's Thesis

  16. Published

    Development of a machine learning-based interatomic potential for silicon carbide (SiC) using atomic cluster expansion (ACE)

    Halkali, C., Holub, G., Rajabzadeh, Z. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Development of high entropy alloy thin films for hydrogen permeation barriers

    Kirchmair, M., 2024

    Research output: Thesis › Master's Thesis

  18. Published

    Direct fabrication of tailored metal-carbon nanocomposites made by two-photon polymerization

    Jahn, M. P., 2024

    Research output: Thesis › Master's Thesis

  19. Published

    Effect of airborne particle abrasion and regeneration firing on the strength of 3D-printed 3Y and 5Y zirconia ceramics

    Mirt, T., Kocjan, A., Hofer, A.-K., Schwentenwein, M., Ivekovic, A., Bermejo, R. & Jevnikar, P., 2024, In: Dental Materials. 40.2024, 1, p. 111-117 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Effect of Cu on the Carbide and Nitride Formation in Steels for High-Power Density Gears

    Böhle, S. I., 2024

    Research output: Thesis › Doctoral Thesis

  21. Published

    Effects of processing conditions on electrical properties of cold sintered BaTiO3

    Kaplan, P., 2024

    Research output: Thesis › Master's Thesis

  22. Published

    Einfluss von Ausforming auf die Mikrostruktur von PH13-8 Mo Maraging Stählen

    Krammer, K., 2024

    Research output: Thesis › Master's Thesis

  23. Published

    Electrical cycling and failure analysis of a lead-free piezoceramic

    Neumüller, J., 2024

    Research output: Thesis › Master's Thesis

  24. Published

    Engineering nickel-aluminum reactive powders: Influence of ball milling duration and starting particle size on specific surface area and skeletal density

    Kyriacou, A., Kostoglou, N., Gunduz, I. E. & Rebholz, C., 2024.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Fabrication and Mechanical Characterisation of Advanced Alumino-Borosilicate Glasses

    Ladinger, L., 2024

    Research output: Thesis › Master's Thesis

  26. Published

    Front Cover Story for peer-reviewed publication titled "Plasma-Treated Cobalt-Doped Nanoporous Graphene for Electrochemical Applications": C—Journal of Carbon Research, Volume 10, Issue 2, June 2024

    Knabl, F., Kostoglou, N., Gupta, R. K., Tarat, A., Hinder, S. J., Baker, M., Rebholz, C. & Mitterer, C., 2024

    Research output: Non-textual form › Digital or Visual Products › Research

  27. Published

    Functional magnetic composite materials with tuneable magnetic properties

    Payer, P., 2024

    Research output: Thesis › Master's Thesis

  28. Published

    Functional thin films for advanced microelectronics at the chair for functional materials and material systems

    Daniel, R., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Hochauflösende Untersuchung der Nb-Löslichkeit in mikrolegierten Stählen

    Luger, T., 2024

    Research output: Thesis › Master's Thesis

  30. Published

    Hydrogen embrittlement in steels: state-of-the-art in theory and practice

    Graf, M., 2024

    Research output: Thesis › Master's Thesis

  31. Published

    Hydrogen storage in nanoporous FeTi foams

    Schweiger, L., Spieckermann, F., Kostoglou, N., Stock, S., Wurster, S., Cengeri, P., Zehetbauer, M. J., Kiener, D. & Eckert, J., 2024.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Impact of measurement errors on machine learning models in steel production

    Rechberger, A., 2024

    Research output: Thesis › Master's Thesis

  33. Published

    Impact of the Wire Arc Additive Manufacturing (WAAM) process on the distortion and residual stress state of rapidly rotating components in solid/liquid separation

    Ruess, L., 2024

    Research output: Thesis › Master's Thesis

  34. Published

    Influence of Sc, Y, Ti, Zr, Hf, V, Nb, and Ta on structural and mechanical properties of Cr-Al-N coatings

    Mayrhofer, P., Zhou, L. & Holec, D., 2024, In: Berg- und hüttenmännische Monatshefte : BHM. 169.2024, 7, p. 375-380 6 p.

    Research output: Contribution to journal › Article › Research

  35. Published

    Integrated approach to SiC crystal growth: Multiphysics modeling and chemistry assessment in PVT furnaces

    Ramadan, Z., Obermüller, T., Hammer, R. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Interface engineering at the nanoscale: Synthesis of low-energy boundaries

    Kapp, M., Eckert, J. & Renk, O., 2024, In: Advanced engineering materials. 26.2024, 19, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigating mechanical properties of silicon carbide coated carbon nanotube composite at elevated temperatures

    Mo, J., Schaffar, G. J. K., Du, L., Maier-Kiener, V., Kiener, D., Vollebregt, S. & Zhang, G., 2024, 2024 IEEE 37th International Conference on Micro Electro Mechanical Systems (MEMS). Vol. 37.2024. p. 626-629 4 p. (IEEE access).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Investigation of the lifetime of sintered interconnects in power electronics

    Prutti, M. T., 2024

    Research output: Thesis › Master's Thesis

  39. Published

    LITHOZ: Multi-Material 3D Printing

    Schwentenwein, M., Schlacher, J. & Bermejo Moratinos, R., 2024, In: Ceramic applications. 12, 1, p. 40-43

    Research output: Contribution to journal › Article › Transfer

  40. Published

    Lokales Verformungsverhalten von gehipptem Molybdän

    Heim, C., 2024

    Research output: Thesis › Master's Thesis

  41. Published

    Mechanical and electronic properties of monolayer TMDCs: A DFT study

    Ziegler, M., 2024

    Research output: Thesis › Master's Thesis

  42. Published

    Metallic Thin Film Fatigue Dominated by the Interface Character

    Gebhart, D., 2024

    Research output: Thesis › Doctoral Thesis

  43. Published

    Micro-mechanical approach to assess the strength of nanocrystalline tungsten-copper composites

    Schmuck, K. S., 2024

    Research output: Thesis › Doctoral Thesis

  44. Published

    Microplastic response of 2PP-printed ceramics

    Sänger, J. C., Riechers, B., Pauw, B. R., Maaß, R. & Günster, J., 2024, In: Journal of the American Ceramic Society. 107, p. 6636-6645

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Microstructural influences on bending resonance fatigue in nickel-based superalloy Rene'88DT

    Taurer, G., 2024

    Research output: Thesis › Master's Thesis

  46. Published

    Microstructure and magnetic properties of high-pressure torsion synthesized hard magnetic materials

    Weissitsch, L. E., 2024

    Research output: Thesis › Doctoral Thesis

  47. Published

    Microstructures and mechanical properties of CoCrFeNiAl-based high-entropy alloys

    Zhang, Z., 2024

    Research output: Thesis › Doctoral Thesis

  48. Published

    Mikromechanische Charakterisierung von Phasenübergängen

    Gottlieb, H., 2024

    Research output: Thesis › Master's Thesis

  49. Published

    Multiphysics simulations of PVT process for SiC growth

    Moya Merino, C., 2024

    Research output: Thesis › Master's Thesis

  50. Published

    Nanoparticle-functionalized 3D substrates for superior analytical performance in surface enhanced raman spectroscopy

    Mouti, N.-M., Kostoglou, N., Obenaus-Emler, R. & Mitterer, C., 2024.

    Research output: Contribution to conference › Poster › Research

  51. Published

    NbC-Ausscheidungen in einem PH 15-5 Stahl

    Kaufmann, M., 2024

    Research output: Thesis › Master's Thesis

Previous 1 2 3 4 5 6 7 8 ...110 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben