Department Materials Science
Organisational unit: Departments and Institutes
Research output
- 2019
- E-pub ahead of print
Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution during Rolling of Directionally Solidified Ag-Cu Eutectic Alloy
LI, J., Li, J., Renk, O., Pippan, R. & Ghosh, P., 31 Oct 2019, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 1, p. 368-379 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
The effect of B and C addition on microstructure and mechanical properties of TiN hard coatings grown by chemical vapor deposition
Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 31 Oct 2019, In: Thin solid films. 688.2019, 137283, 8 p., 137283.Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal expansion of magnetron sputtered TiCxN1-x coatings studied by high-temperature X-ray diffraction
Saringer, C., Kickinger, C., Munnik, F., Mitterer, C., Schalk, N. & Tkadletz, M., 31 Oct 2019, In: Thin solid films. 688.2019, 31 October, 8 p., 137307.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Optimizing the magnetic properties of Fe-based amorphous powder by adjusting atomic structures from vitrification at different temperatures
Kim, S. Y., Oh, H. R., Kim, H. A., Lee, A. Y., Kim, H. J., Yang, S. S., Kim, Y. J., Choi, H. J., Kim, I. H., Kim, H. G., Eckert, J., Kim, J. R. & Lee, M. H., 25 Oct 2019, (E-pub ahead of print) In: Journal of applied physics. 126.2019, 16, 165109.Research output: Contribution to journal › Article › Research › peer-review
- Published
Assessment of ductile character in superhard Ta-C-N thin films
Glechner, T., Hahn, R., Wojcik, T., Holec, D., Kolozsvari, S., Zaid, H., Kodambaka, S., Mayrhofer, P. H. & Riedl, H., 15 Oct 2019, In: Acta materialia. 179.2019, 15 October, p. 17-25 9 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Microstructure and stress gradients in TiW thin films characterized by 40 nm X-ray diffraction and transmission electron microscopy
Saghaeian, F., Keckes, J., Woehlert, S., Rosenthal, M., Reisinger, M. & Todt, J., 14 Oct 2019, (E-pub ahead of print) In: Thin solid films. 691.2019, 1 December, 7 p., 137576.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Coiled artificial muscles based on UHMWPE with large muscle stroke
Maksimkin, A. V., Larin, I. I., Chukov, D. I., Zadorozhnyy, M. Y., Dayyoub, T., Zadorozhnyy, V. Y., Spieckermann, F. & Soprunyuk, V., 11 Oct 2019, (E-pub ahead of print) In: Materials Today Communications. 21.2019, December, 5 p., 100688.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb
Völker, B., Maier-Kiener, V., Werbach, K., Müller, T., Pilz, S., Calin, M., Eckert, J. & Hohenwarter, A., 5 Oct 2019, In: Materials and Design. 179.2019, 5 October, 11 p., 107864.Research output: Contribution to journal › Article › Research › peer-review
- Published
Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements
Zenk, C., Gibson, J. S. K. L., Maier-Kiener, V., Neumeier, S., Göken, M. & Korte-Kerzel, S., 2 Oct 2019, In: Acta materialia. 181.2019, December, p. 385-398 14 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Correlation of mechanical damage and electrical behavior of Al/Mo bilayers subjected to bending
Kreiml, P., Rausch, M., Terziyska, V. L., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M. J., 1 Oct 2019, In: Thin solid films. 687.2019, 1 October, 9 p., 137480.Research output: Contribution to journal › Article › Research › peer-review
- Published
Cross-sectional gradients of residual stresses, microstructure and phases in a nitrided steel revealed by 20 µm synchrotron X-ray diffraction
Bodner, S. C., Ziegelwanger, T., Meindlhumer, M., Holcova, J., Todt, J., Schell, N. & Keckes, J., Oct 2019, In: Metallurgia Italiana. 2019, 10, p. 7-11 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Accepted/In press
Solid bitumen in shale reservoirs: a challenge in organic petrography and geochemistry
Misch, D., Riedl, F., Vranjes-Wessely, S., Horsfield, B., Reischenbacher, D., Ziegs, V., Mendez Martin, F. & Sachsenhofer, R., Oct 2019, (Accepted/In press) New Directions in Geosciences for Unconventional Resources.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Strength of Lithography-Based Alumina
Schlacher, J. C., Lube, T., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 9 Sept 2019.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Fracture behavior and deformation mechanisms in nanolaminated crystalline/amorphous micro-cantilevers
Wang, Y. Q., Fritz, R., Kiener, D., Zhang, J. Y., Liu, G., Kolednik, O., Pippan, R. & Sun, J., 7 Sept 2019, In: Acta Materialia. 180.2019, November, p. 73-83 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
An investigation on diffusivity while achieving a cylindrical aluminide coating on metals using simultaneous spark plasma sintering of powders
Chawake, N., Ghosh, P., Eckert, J. & Kottada, R. S., 1 Sept 2019, In: Scripta Materialia. 170.2019, September, p. 156-160 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Evaluation of the intergranular crack growth resistance of ultrafine grained tungsten materials
Pfeifenberger, M. J., Nikolić, V., Žák, S., Hohenwarter, A. & Pippan, R., 1 Sept 2019, In: Acta Materialia. 176.2019, 1 September, p. 330-340 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Metallography of Intermetallic Titanium Aluminides – the ( Additive ) Manufacturing Makes the Difference
Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 27 Aug 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 9, p. 567-584 18 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Mechanism of high-pressure torsion-induced shear banding and lamellar thickness saturation in Co-Cr-Fe-Ni-Nb high-entropy composites
Maity, T., Prashanth, K. G., Janda, A., Kim, J. T., Spieckermann, F. & Eckert, J., 1 Aug 2019, In: Journal of Materials Research. 34.2019, 15, p. 2672-2682 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings
Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 25 Jul 2019, In: Surface & coatings technology. 370.2019, July, p. 311-319 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Saghaeian, F., Lederer, M., Hofer, A., Todt, J., Keckes, J. & Khatibi, G., 19 Jul 2019, In: International Journal of Fatigue. 128.2019, November, 8 p., 105179.Research output: Contribution to journal › Article › Research › peer-review
- Published
Tuning the glass forming ability and mechanical properties of Ti-based bulk metallic glasses by Ga additions
Bera, S., Ramasamy, P., Sopu, D., Sarac, B., Zalesak, J., Gammer, C., Stoica, M., Calin, M. & Eckert, J., 15 Jul 2019, In: Journal of alloys and compounds. 793.2019, 15 July, p. 552-563 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Nanostructured Fe-Ni Sulfide : A Multifunctional Material for Energy Generation and Storage
Zhao, C., Zhang, C., Bhoyate, S., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S. J., Baker, M., Constantinides, G., Polychronopoulou, K., Rebholz, C. & Gupta, R. K., 11 Jul 2019, In: Catalysts : open access journal. 9.2019, 7, 12 p., 597.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of quenching conditions on texture and mechanical properties of ultra-high strength steels
Esterl, R., Sonnleitner, M., Weißensteiner, I., Hartl, K. & Schnitzer, R., 5 Jul 2019, In: Journal of materials science. 54.2019, 19, p. 12875-12886 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum
Jakob, S., Leitner, A., Lorich, A., Eidenberger-Schober, M., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Jul 2019, In: Materials & design. 182.2019, 15 November, p. 1-9 9 p., 107998.Research output: Contribution to journal › Article › Research › peer-review
- Published
The influence of crystallization conditions on the macromolecular structure and strength of γ-polypropylene
von Baeckmann, C., Wilhelm, H., Spieckermann, F., Strobel, S., Polt, G., Sowinski, P., Piorkowska, E., Bismarck, A. & Zehetbauer, M., 1 Jul 2019, In: Thermochimica Acta. 677.2019, July, p. 131-138 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Verfahren zum Herstellen eines Gegenstands aus einem Maraging-Stahl
Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. DE102017131219, Priority date 22 Dec 2017, Priority No. DE201710131219Research output: Patent
- Published
VERFAHREN ZUM HERSTELLEN EINES GEGENSTANDS AUS EINEM MARAGING-STAHL
Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. WO2019121866, Priority date 22 Dec 2017, Priority No. DE201710131219Research output: Patent
- Published
Stability of the B2 CuZr phase in Cu-Zr-Al-Sc bulk metallic glass matrix composites
Escher, B., Kaban, I., Kühn, U., Eckert, J. & Pauly, S., 25 Jun 2019, In: Journal of alloys and compounds. 790.2019, 25 June, p. 657-665 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Formation of "carbide-free zones" resulting from the interplay of C redistribution and carbide precipitation during bainitic transformation
Klein, T., Hofer, C., Lukas, M., Wojcik, T., Schnitzer, R., Galler, M. & Ressel, G., 23 Jun 2019, In: Materialia. 7.2019, September, 100380.Research output: Contribution to journal › Article › Research › peer-review
- Published
Petrographic and sorption-based characterization of bituminous organic matter in the Mandal Formation, Central Graben (Norway)
Misch, D., Riedl, F., Liu, B., Horsfield, B., Ziegs, V., Mendez Martin, F., Vranjes-Wessely, S. & Sachsenhofer, R., 18 Jun 2019, In: International journal of coal geology. 211.2019, 1 July, 12 p., 103229.Research output: Contribution to journal › Article › Research › peer-review
- Published
Enhanced thermal shock response of Al 2 O 3 –graphite composites through a layered architectural design
Song, J., Yang, H., Bermejo, R., Qu, J., Hu, L. & Zhang, Y., 14 Jun 2019, In: Journal of the American Ceramic Society. 102.2019, 6, p. 3673-3684 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: Insights from strain rate jump tests
Xiao, Y., Maier-Kiener, V., Michler, J., Spolenak, R. & Wheeler, J. M., 7 Jun 2019, In: Materials and Design. 181.2019, November, 11 p., 107914 .Research output: Contribution to journal › Article › Research › peer-review
- Published
Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect
Glushko, O., Mühlbacher, M., Gammer, C., Cordill, M. J., Mitterer, C. & Eckert, J., 4 Jun 2019, In: Scientific reports (e-only). 9, 1, p. 1-9 9 p., 8281.Research output: Contribution to journal › Article › Research › peer-review
- Published
Elasticity of phases in Fe-Al-Ti superalloys: impact of atomic order and anti-phase boundaries
Friák, M., Bursikova, V., Pizurová, N., Pavlu, J., Jiraskova, Y., Homola, V., Miháliková, I., Slávik, A., Holec, D., Všianská, M., Koutna, N., Fikar, J., D., J., Šob, M. & Neugebauer, J., 1 Jun 2019.Research output: Contribution to conference › Poster › Research
- Published
In-situ investigation of the oxidation behavior of metastable CVD Ti1-xAlxN using a novel combination of synchrotron radiation XRD and DSC
Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C. & Schalk, N., 27 May 2019, In: Surface & coatings technology. 374.2019, 25 September, p. 617-624 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature
Issa, I., Hohenwarter, A., Fritz, R. & Kiener, D., 20 May 2019, In: Journal of Materials Research. 2019Research output: Contribution to journal › Article › Research › peer-review
- Published
Correlating high temperature mechanical and tribological properties of CrAlN and CrAlSiN hard coatings
Drnovšek, A., Vo, H., Xia, A., Vachhani, S. J., Kolozsvári, S., Hosemann, P., Franz, R. & Rebelo de Figueiredo, M., 17 May 2019, In: Surface & coatings technology. 372.2019, August, p. 361-368 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction
Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J., Burghammer, M. & Daniel, R., 15 May 2019, In: Materials and Design. 170, p. 1-9 107702.Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructural Evolution and Mechanical Properties of an Advanced γ-TiAl Based Alloy Processed by Spark Plasma Sintering
Wimler, D., Lindemann, J., Clemens, H. & Mayer, S., 9 May 2019, In: Materials. 12.2019, 9, 12 p., 1523.Research output: Contribution to journal › Article › Research › peer-review
- Published
On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry
Thurston, K. V. S., Hohenwarter, A., Laplanche, G., George, E. P., Gludovatz, B. & Ritchie, R. O., 9 May 2019, In: Intermetallics. 110.2019, July, 106469.Research output: Contribution to journal › Article › Research › peer-review
- Published
Electron irradiation effects on strength and ductility of polymer foils studied by femtosecond laser-processed micro-tensile specimens
Pfeifenberger, M. J., Milassin, G., Hohenwarter, A., Putz, B., Semprimoschnig, C. O. A. & Pippan, R., 7 May 2019, In: Materials. 12.2019, 9, 16 p., 1468.Research output: Contribution to journal › Article › Research › peer-review
- Published
Modelling of the highly non-linear electrical behavior of ZnO varistor ceramics
Kaufmann, B. & Supancic, P. H., 6 May 2019.Research output: Contribution to conference › Poster › Research
- Published
Annealing-assisted high-pressure torsion in Zr55Cu30Al10Ni5 metallic glass
Sarac, B., Spieckermann, F., Rezvan, A., Gammer, C., Krämer, L., Kim, J. T., Keckes, J., Pippan, R. & Eckert, J., 5 May 2019, In: Journal of alloys and compounds. 784.2019, p. 1323-1333 11 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
An ab initio study of vacancies in disordered magnetic systems: A Case Study of Fe-Rich Fe-Al Phases
Miháliková, I., Friák, M., Koutná, N., Holec, D. & Šob, M., 2 May 2019, (E-pub ahead of print) In: Materials. 12.2019, 9, 16 p., 1430.Research output: Contribution to journal › Article › Research › peer-review
- Published
Mechanochemical Synthesis and Hydrogenation Behavior of (TiFe)100-xNixAlloys
Zadorozhnyy, V., Berdonosova, E., Gammer, C., Eckert, J., Zadorozhnyy, M., Bazlov, A., Zheleznyi, M., Kaloshkin, S. D. & Klyamkin, S., 2 May 2019, In: Journal of alloys and compounds. 796.2019, 5 August, p. 42 - 46 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Correlating structural and mechanical properties of AlN / TiN superlattice films
Koutná, N., Rehák, P., Chen, Z., Bartosik, M., Fallmann, M., Cerny, M., Zhang, Z., Friák, M., Šob, M., Mayrhofer, P. H. & Holec, D., 1 May 2019, In: Scripta materialia. 165.2019, May, p. 159-163 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
In-Situ Synchrotron Profile Analysis after High-Pressure Torsion Deformation
Kerber, M., Spieckermann, F., Schuster, R., Joni, B., Schell, N. & Schafler, E., 1 May 2019, In: Crystals. 9.2019, 5, 232.Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure Property Relationships in Shape Memory Metallic Glass Composites
Sopu, D., Yuan, X. D., Moitzi, F., Stoica, M. & Eckert, J., 1 May 2019, In: Materials. 12.2019, 9, 10 p., 1419.Research output: Contribution to journal › Article › Research › peer-review
- Published
Arc-produced short-length multi-walled carbon nanotubes as “millstones” for the preparation of graphene-like nanoplatelets
Kostoglou, N., Ryzhkov, V., Walters, I., Doumanidis, C. C., Rebholz, C. & Mitterer, C., May 2019, In: Carbon. 146.2019, May, p. 779-784 6 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
TEM characterisation and Raman spectroscopy of vitrinite
Vranjes-Wessely, S., Misch, D., Kiener, D., Rantitsch, G., Groß, D. & Sachsenhofer, R., May 2019, p. 459. 460 p.Research output: Contribution to conference › Abstract › peer-review
- Published
Thermal stability of immiscible sputter-deposited Cu-Mo thin films
Souli, I., Gruber, G., Terziyska, V., Zechner, J. & Mitterer, C., 30 Apr 2019, In: Journal of alloys and compounds. 793.2019, April, p. 208-218 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influences of Thermomechanical Treatment and Nb Micro-alloying on the Hardenability of Ultra-High Strength Steels
Esterl, R., Sonnleitner, M. & Schnitzer, R., 29 Apr 2019, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 50.2019, 7, p. 3238 - 3245 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Biomimetic hard and tough nanoceramic Ti–Al–N film with self-assembled six-level hierarchy
Meindlhumer, M., Zalesak, J., Pitonak, R., Todt, J., Sartory, B., Burghammer, M., Stark, A., Schell, N., Daniel, R., Keckes, J., Lessiak, M., Köpf, A., Weißenbacher, R. & Keckes, J., 28 Apr 2019, In: Nanoscale. 11.2019, 16, p. 7986-7995 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal Expansion and Other Thermodynamic Properties of α2-Ti3Al and γ-TiAl Intermetallic Phases from First Principles Methods
Holec, D., Abdoshahi, N., Mayer, S. & Clemens, H., 19 Apr 2019, In: Materials. 12.2019, 8, 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse
Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Experimental Chemistry and Structural Stability of AlNb3 Enabled by Antisite Defects Formation
Koutná, N., Erdely, P., Zöhrer, S., Franz, R., Du, Y., Liu, S., Mayrhofer, P. H. & Holec, D., 3 Apr 2019, In: Materials. 12.2019, 7, p. 1-11 11 p., 1104.Research output: Contribution to journal › Article › Research › peer-review
- Published
Plasma-Derived Graphene-Based Materials for Water Purification and Energy Storage
Natter, N., Kostoglou, N., Koczwara, C., Tampaxis, C., Steriotis, T., Gupta, R. K., Paris, O., Rebholz, C. & Mitterer, C., 3 Apr 2019, In: C – journal of carbon research. 5.2019, 2, 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics
Gruber, D., Todt, J., Wöhrl, N., Zalesak, J., Tkadletz, M., Kubec, A., Niese, S., Burghammer, M., Rosenthal, M., Sternschulte, H., Pfeifenberger, M. J., Sartory, B. & Keckes, J., 1 Apr 2019, In: Carbon. 144.2019, April, p. 666-674 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Schadensanalyse an einer Kompaktierwalze aus Siliziumnitrid
Harrer, W., Morrell, R. & Danzer, R., 1 Apr 2019, In: Praktische Metallographie/Practical Metallography. 56.2019, 4, p. 262-275 14 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Mechanical strength of cold-sintered zinc oxide under biaxial bending
Lowum, S., Floyd, R., Bermejo, R. & Maria, J. P., 30 Mar 2019, In: Journal of materials science. 54, 6, p. 4518-4522 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite
Eggbauer, A., Lukas, M., Ressel, G., Prevedel, P., Mendez Martin, F., Keckes, J., Stark, A. & Ebner, R., 22 Mar 2019, In: Journal of materials science. 54.2019, 12, p. 9197-9212 16 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Lignin-based multiwall carbon nanotubes
Gindl-Altmutter, W., Köhnke, J., Unterweger, C., Gierlinger, N., Keckes, J., Zalesak, J. & Rojas, O. J., 22 Mar 2019, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 121.2019, June, p. 175-179 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Compressive and tensile bending of sputter deposited Al/Mo bilayers
Kreiml, P., Rausch, M., Terziyska, V., Winkler, J., Mitterer, C. & Cordill, M., 15 Mar 2019, In: Scripta materialia. 162.2019, March, p. 367-371 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Fast and direct determination of fragility in metallic glasses using chip calorimetry
Spieckermann, F., Steffny, I., Bian, X., Ketov, S., Stoica, M. & Eckert, J., 13 Mar 2019, In: Heliyon. 5.2019, 3, 13 p., e01334.Research output: Contribution to journal › Article › Research › peer-review
- Published
High-resolution transmission electron microscopy investigation of diffusion in metallic glass multilayer films
Ketov, S. V., Ivanov, Y. P., Sopu, D., Luguine-Luzgin, D. V., Suryanarayana, C., Rodin, A. O., Schöberl, T., Greer, A. L. & Eckert, J., 7 Mar 2019, In: Materials today advances. 2019, 1, 100004.Research output: Contribution to journal › Article › Research › peer-review
- Published
Controlling the distribution of structural heterogeneities in severely deformed metallic glass
Bian, X. L., Zhao, D., Kim, J. T., Sopu, D., Wang, G., Pippan, R. & Eckert, J., 2 Mar 2019, In: Materials Science and Engineering A. 752.2019, 3 April, p. 36-42 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructural Analysis of the Recrystallization Behavior of Low Alloyed Steels
Esterl, R., Sonnleitner, M. & Schnitzer, R., 1 Mar 2019, In: Steel research international. 90.2019, 3, 10 p., 1800500.Research output: Contribution to journal › Article › Research › peer-review
- Published
Rate limiting deformation mechanisms of bcc metals in confined volumes
Kiener, D., Fritz, R., Alfreider, M., Leitner, A., Pippan, R. & Maier-Kiener, V., 1 Mar 2019, In: Acta Materialia. 166.2019, March, p. 687-701 15 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Strength limits in mesoscaled 3Y-TZP ceramics for micro-surgical instruments
Antolino, N., Muhlstein, C., Hayes, G., Adair, J. & Bermejo, R., 1 Mar 2019, In: Journal of the Mechanical Behavior of Biomedical Materials. 91, p. 99-108 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Anisotropy in fracture and fatigue resistance of pearlitic steels and its effect on the crack path
Leitner, T., Hohenwarter, A. & Pippan, R., 28 Feb 2019, In: International Journal of Fatigue. 124.2019, July, p. 528-536 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of directional microstructure on mechanical properties in Al‐based ultrafine bimodal lamellar structured alloy
Kim, J. T., Hong, S. H., Eckert, J. & Kim, K. B., 28 Feb 2019, In: Material design & processing communications. 1.2019, 2, 5 p., e52.Research output: Contribution to journal › Article › Research › peer-review
- Published
Solid bitumen in shales: petrographic characteristics and implications for reservoir characterization
Misch, D., Groß, D., Hawranek, G., Horsfield, B., Klaver, J., Mendez Martin, F., Urai, J., Vranjes-Wessely, S., Sachsenhofer, R., Schmatz, J., Li, J. & Zou, C., 28 Feb 2019, In: International journal of coal geology. 205.2019, 1 March, p. 14-31 18 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Bioinspired nacre-like alumina with a bulk-metallic glass-forming alloy as a compliant phase
Wat, A., Lee, J. I., Ryu, C. W., Gludovatz, B., Kim, J., Tomsia, A. P., Ishikawa, T., Schmitz, J., Meyer, A., Alfreider, M., Kiener, D., Park, E. S. & Ritchie, R. O., 27 Feb 2019, In: Nature Communications. 10.2019, 1, 12 p., 961.Research output: Contribution to journal › Article › Research › peer-review
- Published
Deformation Behavior of Designed Dual-Phase CuZr Metallic Glasses
Peng, C. X., Sopu, D., Cheng, Y., Song, K. K., Wang, S., Eckert, J. & Wang, L., 16 Feb 2019, In: Materials and Design. 168.2019, 15 April, 107662.Research output: Contribution to journal › Article › Research › peer-review
- Published
Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation
Renk, O., Maier-Kiener, V., Issa, I., Li, J. H., Kiener, D. & Pippan, R., 15 Feb 2019, In: Acta materialia. 165.2019, 165, p. 409-419 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Effects of reference materials on texture coefficients determined for a CVD α-Al2O3 coating
Stylianou, R. P., Tkadletz, M., Schalk, N., Penoy, M., Czettl, C. & Mitterer, C., 15 Feb 2019, In: Surface & coatings technology. 359.2019, February, p. 314-322 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Polymorphic Transformation and Magnetic Properties of Rapidly Solidified Fe26.7Co26.7Ni26.7Si8.9B11 High-Entropy Alloys
Zhang, Z., Song, K. K., Li, R., Xue, Q. S., Wu, S., Yan, D., Li, X. L., Song, B., Sarac, B., Kim, J. T., Ramasamy, P., Wang, L. & Eckert, J., 15 Feb 2019, In: Materials. 12.2019, 4, 14 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Biaxiale Festigkeitsprüfung von Keramiken
Supancic, P. H., Lube, T. & Danzer, R., 13 Feb 2019.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Crack deflecting microstructure for improved electro-mechanical lifetimes of flexible systems
Cordill, M. J., Jörg, T., Glushko, O., Franz, R. & Mitterer, C., 13 Feb 2019, In: Materials letters. 244.2019, 1 June, p. 47-49 3 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Electrodeposited Nanostructured CoFe2O4 for OverallWater Splitting and Supercapacitor Applications
Zhang, C., Bhoyate, S., Zhao, C., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S. J., Baker, M., Constantinides, G., Polychronopoulou, K., Rebholz, C. & Gupta, R. K., 13 Feb 2019, In: Catalysts : open access journal. 9.2019, 2, p. 1-11 11 p., 176.Research output: Contribution to journal › Article › Research › peer-review
- Published
Festigkeit von additiv gefertigtem Aluminiumoxid
Lube, T., Schlacher, J. C., Harrer, W. S., Danzer, R., Mitteramslkogler, G. & Schwentenwein, M., 13 Feb 2019.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Microstructural evolution of a dual hardening steel during heat treatment
Hofinger, M., Staudacher, M., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 10 Feb 2019, In: Micron. 120.2019, May, p. 48-56 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Characterization of strain bursts in high density polyethylene by means of a novel nano creep test
Wilhelm, H. R., Spieckermann, F., Fischer, C., Polt, G. & Zehetbauer, M. J., 5 Feb 2019, In: International journal of plasticity. 116.2019, May, p. 297-313 17 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Oxidation and wet-etching behavior of MoAlTi thin films deposited by sputtering from a rotatable MoAlTi compound target
Lorenz, R., O`Sullivan, M., Sprenger, D., Lang, B., Köstenbauer, H., Winkler, J. & Mitterer, C., 5 Feb 2019, In: Journal of vacuum science & technology / B (JVST). 37.2019, 2, 021202.Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal crack network on CVD TiCN/α-Al2O3 coated cemented carbide cutting tools
Gassner, M., Schalk, N., Tkadletz, M., Czettl, C. & Mitterer, C., 5 Feb 2019, In: International journal of refractory metals & hard materials. 81.2019, June, p. 1-6 6 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Analytical and Numerical Crack Growth Analysis of 1:3 Scaled Railway Axle Specimens
Simunek, D., Leitner, M., Maierhofer, J., Gänser, H.-P. & Pippan, R., 3 Feb 2019, In: Metals : open access journal . 9.2019, 2, p. 184 18 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Antibacterial Silicon Oxide Thin Films Doped with Zinc and Copper Grown by Atmospheric Pressure Plasma Chemical Vapor Deposition
Jäger, E., Schmidt, J., Pfuch, A., Spange, S., Beier, O., Jäger, N., Jantschner, O., Daniel, R. & Mitterer, C., Feb 2019, In: Nanomaterials. 9.2019, 2, p. 1-14 14 p., 255.Research output: Contribution to journal › Article › Research › peer-review
- Published
Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests
Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution
Erdely, P., Staron, P., Stark, A., Klein, T., Clemens, H. & Mayer, S., Feb 2019, In: Acta materialia. 164.2019, February, p. 110-121 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
Salman, O. O., Gammer, C., Eckert, J., Chaubey, A. K. & Scudino, S., 31 Jan 2019, In: Materials science and engineering C (Biomimetic and supramolecular systems). 748.2019, 4 March, p. 205-212 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Study of CuO Nanowire Growth on Different Copper Surfaces
Fritz-Popovski, G., Sosada-Ludwikowska, F., Köck, A., Keckes, J. & Maier, G. A., 28 Jan 2019, In: Scientific reports (London : Nature Publishing Group). 9.2019, 807, 13 p., 807.Research output: Contribution to journal › Article › Research › peer-review
- Published
Fast Calorimetry ofMg65Cu25Gd10
Spieckermann, F., 25 Jan 2019.Research output: Contribution to conference › Poster › Research
- Published
Tailoring bimodal grain size structures in nanocrystalline compositionally complex alloys to improve ductility
Schuh, B., Pippan, R. & Hohenwarter, A., 25 Jan 2019, In: Materials Science and Engineering A. 748.2019, 4 March, p. 379-385 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
A comparative study of glass-forming ability, crystallization kinetics and mechanical properties of Zr55Co25Al20 and Zr52Co25Al23 bulk metallic glasses
Dong, Q., Pan, Y., Tan, J., Qin, X. M., Li, C. J., Gao, P., Feng, Z. X., Calin, M. & Eckert, J., 17 Jan 2019, In: Journal of alloys and compounds. 785.2019, 15 May, p. 422 - 428 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Complementary Thermal Analysis Protocols for the Investigation of the Tempering Reactions of a Carbide-Free Bainitic Steel
Klein, T., Lukas, M., Haslberger, P., Friessnegger, B., Galler, M. & Ressel, G., 16 Jan 2019, In: JOM. 71.2019, 4, p. 1357-1365 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Combination of Nanoindentation and Microscopy for the Examination of Aluminum Alloys in Coarse- and Ultrafine-Grained Condition
Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 9 Jan 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 7, p. 432-442 11 p.Research output: Contribution to journal › Article › Research
- Published
Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure
Klünsner, T., Jonke, M., Supancic, P., Gettinger, C., Krobath, M., Lube, T., Marsoner, S. & Glätzle, J., 4 Jan 2019, In: International Journal of Refractory Metals and Hard Materials. 80, p. 97-103 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Anisotropy of Tensile and Fracture Behavior of Pure Titanium after Hydrostatic Extrusion
Moreno-Valle, E. C., Pachla, W., Kulczyk, M., Sabirov, I. & Hohenwarter, A., 1 Jan 2019, In: Materials transactions. 60.2019, 10, p. 2160-2167 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Retardation of Fatigue Crack Growth in Rotating Bending Specimens with Semi-Elliptical Cracks
Leitner, M., Simunek, D., Maierhofer, J., Gänser, H.-P. & Pippan, R., 1 Jan 2019, In: Metals : open access journal . 9.2019, 2, 13 p., 156.Research output: Contribution to journal › Article › Research › peer-review
- Published
Evidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy
Musi, M., Erdely, P., Rashkova, B., Clemens, H., Stark, A., Staron, P., Schell, N. & Mayer, S., Jan 2019, In: Materials characterization. 147.2019, January, p. 398-405 8 p.Research output: Contribution to journal › Article › Research › peer-review