Chair of Processing of Composites and Design for Recycling (270)

Organisational unit: Chair

1 - 100 out of 372Page size: 100

10
20
50
100
All

Sort by: Publication date

Research output

2025
Published
The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content
Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.
Research output: Contribution to journal › Article › Research › peer-review
2024
Published
A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements
May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A. & Michaud, V. & 9 others, Park, C. H., Schubnel, R., Sousa, P., Ravel, R., Rouhi, M., Syerko, E., Umer, R., Vollmer, M. & Yong, A., 20 Nov 2024, In: Composites Part A: Applied Science and Manufacturing. 190.2025, March, 13 p., 108592.
Research output: Contribution to journal › Article › Research › peer-review
Published
Challenges and Opportunities in Carbon Fiber-Reinforced Polymer Composites Circularity: A Prospective LCA Case Study
Miao, Z. C., Kirschnick, U., Chen, H. & Carbajales-Dale, M., 23 Oct 2024.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement
Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Oct 2024, In: Journal of composites science. 8.2024, 10, 21 p., 396.
Research output: Contribution to journal › Article › Research › peer-review
Published
Spritzgießcompoundieren im Recycling von Post-Consumer PP Abfällen
Zidar, D., Krempl, N., Shahroodi, Z., Kirschnick, U. & Holzer, C., 1 Sept 2024, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2024, 01, p. 38-42 5 p.
Research output: Contribution to journal › Article › Research
Published
Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materials
Sharma, H., Bender, M., Kim, G., Lee, D., Caglayan, C., Schlögl, S., Yun, G. J., Kumar, A. & Rana, S., 24 Aug 2024, In: Journal of Applied Polymer Science. 141.2024, 41, 15 p., e56074.
Research output: Contribution to journal › Article › Research › peer-review
Published
Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene
Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Fatigue and residual strain monitoring for thermoplastic composite using embedded FBG inscribed in highly-birefringent side-hole elliptical core optical fiber
Wachtarczyk, K., Yadav, N., Błachut, A., Gąsior, P., Schledjewski, R. & Kaleta, J., 27 Jul 2024, In: Measurement. 238.2024, October, 14 p., 115404.
Research output: Contribution to journal › Article › Research › peer-review
Published
Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes
Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.
Research output: Contribution to journal › Article › Research › peer-review
Published
INFLUENCE OF FLUID PROPERTIES ON TRANSVERSE FABRIC COMPRESSIBILITY DURING IN-SITU IMPREGNATION
Bender, M. & Fauster, E., 5 Jul 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 3 - Material and Structural Behavior – Simulation & Testing. 1 ed. Nantes, Vol. 3. p. 1140 - 1147 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Near-infrared spectroscopy in resin transfer molding—determination of the degree of cure
Salzmann, M., Märzinger, W., Teuchtmann, M., Ravindran, B., Kirschnick, U. & Fauster, E., Jun 2024, In: International Journal of Advanced Manufacturing Technology. 132.2024, 11-12, p. 5557-5565 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Compaction behaviour of textile reinforcements
Bender, M., 23 May 2024.
Research output: Contribution to conference › Poster › Transfer
Published
Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process
Legenstein, A. & Fauster, E., 29 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 3, 17 p., 91.
Research output: Contribution to journal › Article › Research › peer-review
Published
Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis
Ravindran, B., Agathocleous, T., Oswald-Tranta, B., Fauster, E. & Feuchter, M., 29 Mar 2024, In: Journal of composites science. 8.2024, 4, 20 p., 126.
Research output: Contribution to journal › Article › Research › peer-review
Published
Effect of different weft-knitted structures on the mechanical performance of bio-based flexible composites
Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Feuchter, M. & Resch-Fauster, K., Mar 2024, In: Composites Part C: Open Access. 13.2024, March, 11 p., 100436.
Research output: Contribution to journal › Article › Research › peer-review
Published
Tensile properties of flexible composites with knitted reinforcements from various yarn materials
Schwaiger, M., Röper, F., Wolfahrt, M., Taesler, J., Schirmer, H., Salzmann, M., Feuchter, M. & Resch-Fauster, K., 20 Feb 2024, In: Polymer Composites. 45.2024, 3, p. 2602-2614 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Circular Economy Potential of Sustainable Bio-Based Composites: Repair, Recycle and Reuse
Ravindran, B. & Fauster, E., 2024.
Research output: Contribution to conference › Poster › Research
Published
Environmental impact assessment of a car door panel using recycled carbon fibers: Relevance of different life stages and influence of modelling choices
Kirschnick, U., Duchamp, B. & Fick, G., 2024, p. 56. 62 p.
Research output: Contribution to conference › Paper › peer-review
Published
Ermittlung der Gelzeit mittels Nahinfrarotspektroskopie in der lösungsmittelfreien Prepreg Herstellung
Schmid, S., 2024
Research output: Thesis › Master's Thesis
Published
Influence of Carbon Material Properties on Slag-Foaming Dynamics in Electric Arc Furnaces: A Review
Kieush, L. & Schenk, J., 2024, In: Steel research international. ??? Stand: 11. Februar 2025, ??? Stand: 11. Februar 2025
Research output: Contribution to journal › Review article › peer-review
Published
INLINE PROCESS MONITORING AND FAILURE MANAGEMENT CONCEPT FOR ATL
Yadav, N., Schledjewski, R. & Fauster, E., 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 5 - Manufacturing. p. 497-502 6 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Inline Process Monitoring Using Near-Infrared Spectroscopy in Liquid Composite Molding Processes: Measurement and Analysis of Critical Parameters in Epoxy/Amine Resin Systems
Salzmann, M. L., 2024
Research output: Thesis › Doctoral Thesis
Published
On the Potential of Epoxy Binder Rovings in Automated Dry Fiber Filament Winding
Neunkirchen, S., 2024
Research output: Thesis › Doctoral Thesis
2023
Published
Effect of Binder Activation on in-Plane Capillary Flow in Multilayer Stacks of Carbon Fiber Fabrics
Neunkirchen, S., Bender, M. & Schledjewski, R., 21 Dec 2023, In: Applied composite materials. 31.2024, April, p. 709-719 11 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Experimental validation of a new adaptable LCM mold filling software
Obertscheider, C., Fauster, E. & Stieber, S., 12 Dec 2023, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 19 p., 2282310.
Research output: Contribution to journal › Article › Research › peer-review
Published
Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replication
Bender, M. & Fauster, E., 1 Nov 2023, In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 5 p., 2263828.
Research output: Contribution to journal › Article › Research › peer-review
Published
Determination of the glass transition temperature of an epoxy prepreg by Near Infrared Spectroscopy
Salzmann, M., Teuchtmann, M. & Schledjewski, R., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108111.
Research output: Contribution to journal › Article › Research › peer-review
Published
Parametric effect on inline width control for thermoplastic automated tape layup
Yadav, N. & Schledjewski, R., Aug 2023.
Research output: Contribution to conference › Paper
Published
Inferring material properties from FRP processes via sim-to-real learning
Stieber, S., Schröter, N., Fauster, E., Bender, M., Schiendorfer, A. & Reif, W., 27 Jul 2023, In: International Journal of Advanced Manufacturing Technology. 128.2023, September, p. 1517–1533 17 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Review of in-process defect monitoring for automated tape laying
Yadav, N. & Schledjewski, R., 20 Jul 2023, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 173.2023, Oktober, 16 p., 107654.
Research output: Contribution to journal › Article › Research › peer-review
Published
Resin avatar for Industry 4.0
Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.
Research output: Contribution to conference › Abstract › peer-review
Published
Resin avatar for Industry 4.0
Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.
Research output: Contribution to conference › Presentation › Research
Published
RTMsim - A Julia module for filling simulations in Resin Transfer Moulding with the Finite Area Method
Obertscheider, C. & Fauster, E., 15 Apr 2023, In: The journal of open source software. 8.2023, 8 p., 4763.
Research output: Contribution to journal › Article › Research › peer-review
Published
Stretch-Steering of Aligned Discontinuous Fiber Tapes on Highly Curved Paths using Automated Fiber Placement
Legenstein, A., Füssel, L., Tierney, J., Gillespie Jr., J. W., Heider, D. & Cender, T., Apr 2023, p. 992-1005. 13 p.
Research output: Contribution to conference › Paper › peer-review
E-pub ahead of print
In-line and off-line NDT defect monitoring for thermoplastic automated tape layup
Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding
Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications
Reisinger, D., Kriehuber, M. U., Bender, M., Bautista-Anguís, D., Rieger, B. & Schlögl, S., 14 Mar 2023, In: Advanced materials. 35.2023, 24, 27 p., 2300830.
Research output: Contribution to journal › Article › Research › peer-review
Published
Bio-based soft composites with knitted reinforcements
Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023.
Research output: Contribution to conference › Poster › Research
Published
Bio-based soft composites with knitted reinforcements
Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023, 31st Leoben Conference on Polymer Engineering & Science. Leoben
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Circularity and sustainability of biobased polymer/natural fiber reinforced composite
Ravindran, B. & Schledjewski, R., 2023, Global Challenges for a Sustainable Society .
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Environmental assessment comparison of natural fiber reinforced polymer composites processing
Kirschnick, U., 2023.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Environmental assessment of natural fiber reinforced polymer composites processing
Kirschnick, U. & Schledjewski, R., 2023, 31st Leoben Conference on Polymer Engineering & Science.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and GF
Kirschnick, U., 2023.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and glass fibers
Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, Polymer Meeting 15: Book of Abstracts.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Evaluation of repairing techniques for damaged natural fiber reinforced composites
Cardenas Velasco, J., 2023
Research output: Thesis › Master's Thesis
Published
Influence of the Textile Architecture on its Transversal Compaction Behaviour
Hollitsch, M., 2023
Research output: Thesis › Master's Thesis
Published
Inline monitoring and control for Automated Tape Laying
Yadav, N., 2023
Research output: Thesis › Doctoral Thesis
Published
Investigation of the influence of speed increase in pultrusion by means of design of experiment on the barrier properties of glass fiber reinforced polyester profiles.
Ekam, M., 2023
Research output: Thesis › Master's Thesis
Published
LCA of a recycled GFRP composite: Comparing attributional and consequential modelling approaches
Kirschnick, U., 2023.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios
Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, In: WSEAS transactions on environment and development. 19.2023, 11 p.
Research output: Contribution to journal › Article › Research › peer-review
2022
Published
COMPOSITES SUSTAINABILITY – MANUFACTURING, REPAIR, AND RECYCLING ARE CHALLENGING
Schledjewski, R., 22 Nov 2022, Proceedings SE Conference 22 Hamburg.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A porous capillary tube approach for textile saturation
Neunkirchen, S., Blößl, Y. & Schledjewski, R., 10 Nov 2022, In: Composites science and technology. 230.2022, 10 November, 9 p., 109450.
Research output: Contribution to journal › Article › Research › peer-review
Published
Bio-based FRP composites and their circularity potential: Options for environmental assessment
Kirschnick, U., Kern, H. & Schledjewski, R., 10 Nov 2022.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Bio-based FRP composites and their circularity potential: Options for environmental assessment
Kirschnick, U., Kern, H. & Schledjewski, R., 9 Nov 2022.
Research output: Contribution to conference › Paper › peer-review
Published
Inline tape width control for thermoplastic automated tape layup
Yadav, N. & Schledjewski, R., 21 Oct 2022, In: Composites Part A: Applied Science and Manufacturing. 163.2022, December, 9 p., 107267.
Research output: Contribution to journal › Article › Research › peer-review
Published
Circularity and sustainability of biobased polymer/natural fiber reinforced composite
Ravindran, B. & Schledjewski, R., 20 Oct 2022.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber
Wachtarczyk, K., Bender, M., Fauster, E., Schledjewski, R., Gąsior, P. & Kaleta, J., 19 Sept 2022, In: Materials. 15.2022, 18, 14 p., 6497.
Research output: Contribution to journal › Article › Research › peer-review
Published
Dry fiber filament winding - Fundamentals and challenges
Neunkirchen, S. & Schledjewski, R., 15 Sept 2022.
Research output: Contribution to conference › Poster › Research
Published
Compressibility and Relaxation Characteristics of Bindered Non-Crimp-Fabrics Under Temperature and Injection Fluid Influence
Bender, M. & Fauster, E., 29 Aug 2022, Proceedings of the Munich Symposium on Lightweight Design 2021: Tagungsband zum Münchner Leichtbauseminar 2021. 1 ed. Heidelberg: Springer Vieweg, p. 44-58 14 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation
Schledjewski, R., Blößl, Y. & Neunkirchen, S., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). Trans Tech Publications, p. 1372-1378 7 p. (Key Engineering Materials; vol. 926 KEM).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Mechanical flexible composites from renewable resources
Schwaiger, M., Bender, M. & Resch-Fauster, K., 21 Jul 2022, Book of Abstracts - Verbund 2022.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A COMPARISON OF DIFFERENT NATURAL FIBER REINFORCED COMPOSITES USING RTM & VARI PROCESS
Ravindran, B., Ekam, M., Kirschnick, U., Le Vély, G., Salzmann, M., Schledjewski, R. & Schmid, S., 20 Jul 2022.
Research output: Contribution to conference › Poster › Research
Published
Experimental validation of the porous tube model for capillary rise
Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jul 2022.
Research output: Contribution to conference › Poster › Research
Published
Recycling GFRP composites: How to assess environmental performance?
Kirschnick, U., Krempl, N. & Schledjewski, R., 20 Jul 2022.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Adapting the optical reflectivity of carbon fiber reinforced polymers on the nano-scale: Matrix vs. fiber modification
Haiden, L., Feuchter, M., Barbezat, M., Pansare, A., Brunner, A. J., Neunkirchen, S. & Pinter, G. G., Jul 2022, European Polymer Congress - Book of Abstracts. p. 282
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Using Near-Infrared-Spectroscopy for quality inspection of prepregs before processing
Salzmann, M., Schledjewski, R. & Teuchtmann, M., 27 Jun 2022.
Research output: Contribution to conference › Poster › Research
Published
Experimental validation of the porous tube model for capillary rise
Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jun 2022, 23. Symposium Verbundwerkstoffe und Werkstoffverbunde – Abstract Booklet. DGM, p. 28 1 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
The influence of recyclates on the mechanical and long-term properties of virgin materials
Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 11 Apr 2022.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry
Yadav, N. & Schledjewski, R., 6 Apr 2022. 2 p.
Research output: Contribution to conference › Paper
Published
The influence of recyclates on the mechanical and long-term properties of virgin materials
Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 4 Apr 2022.
Research output: Contribution to conference › Paper › peer-review
Published
In-line residual strain monitoring for thermoplastic automated tape layup using fiber Bragg grating sensors
Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 5 Jan 2022, In: Polymer Composites. 43.2022, 3, p. 1590-1602 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
High-performance composite with 100% bio-based carbon content produced from epoxidized linseed oil, citric acid and flax fiber reinforcement
Todorovic, A., Blößl, Y., Oreski, G. & Resch-Fauster, K., Jan 2022, In: Composites Part A: Applied Science and Manufacturing. 152.2022, January, 9 p., 106666.
Research output: Contribution to journal › Article › Research › peer-review
Published
Challenges in the use of highly birefringent fiber bragg gratings for strain sensing in composites
Wachtarczyk, K., Bender, M., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.
Research output: Contribution to conference › Abstract
Published
DETERMINATION OF A RACETRACKING PASS-FAIL CRITERION FOR EDGE FLOW PERMEABILITY MEASUREMENT
George, A., Huntsman, M., Koorevaar, A., Fauster, E. & May, D., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 733-740 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
EXPERIMENTAL CHARACTERIZATION OF TRANSVERSE FABRIC COMPRESSIBILITY BY MEANS OF IN-SITU-IMPREGNATION
Bender, M. & Fauster, E., 2022.
Research output: Contribution to conference › Paper
Published
Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry
Yadav, N. & Schledjewski, R., 2022.
Research output: Contribution to conference › Abstract
Published
Inline NDT for thermoplastic Automated Tape Layup
Yadav, N., Oswald-Tranta, B. & Schledjewski, R., 2022.
Research output: Contribution to conference › Poster › Research
Published
Machine Learning Based Tape Width Prediction for the Thermoplastic Automated Tape Placement Process
Legenstein, A. & Schledjewski, R., 2022, Composites meet Sustainability – Proceedings of the 20th European Conference on Composite Materials. 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Monitoring of thermoplastic composites with an FBG inscribed in highly-birefringent optic fiber
Wachtarczyk, K., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.
Research output: Contribution to conference › Abstract
Published
NDE optical based methods for liners assessment for hydrogen storage
Wachtarczyk, K., Gąsior, P., Kaleta, J. & Yadav, N., 2022.
Research output: Contribution to conference › Poster › Research
Published
Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor
Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.
Research output: Contribution to conference › Poster › Research
Published
Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor
Yadav, N., 2022.
Research output: Contribution to conference › Abstract
Published
Soft composites from bio-based resources
Schwaiger, M., Bender, M., Taesler, J., Schirmer, H. & Resch-Fauster, K., 2022, Proceedings of the 20th European Conference on Composite Materials - Composites meet sustainability.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Verbundwerkstoffe auf Basis vitrimerer Polymersysteme: Verarbeitungsverhalten und Umformanalyse
Stryzek, M., 2022
Research output: Thesis › Master's Thesis
2021
Published
In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber
Wachtarczyk, K., Gąsior, P., Kaleta, J., Anuszkiewicz, A., Bender, M., Schledjewski, R., Mergo, P. & Osuch, T., 31 Dec 2021, In: Materials. 15.2022, 1, 16 p., 77.
Research output: Contribution to journal › Article › Research › peer-review
Published
Instrumentation of an Inspection Test Rig for Geometry Measurement of Fiber Bundles in Automated Composite Manufacturing
Neunkirchen, S., Fauster, E., Lehner, S. & O'Leary, P., 13 Dec 2021, In: IEEE transactions on instrumentation and measurement. 71
Research output: Contribution to journal › Special issue › Research › peer-review
Published
Usage of Near-Infrared Spectroscopy for Inline Monitoring the Degree of Curing in RTM Processes
Salzmann, M., Blößl, Y., Todorovic, A. & Schledjewski, R., 17 Sept 2021, In: Polymers. 13.2021, 18, 13 p., 3145.
Research output: Contribution to journal › Article › Research › peer-review
Published
Methodenentwicklung zur kohärenten Charakterisierung bebinderter Verstärkungstextilen bei erhöhter Temperatur
Bender, M. & Fauster, E., 15 Sept 2021.
Research output: Contribution to conference › Poster › Research
Published
Thermoforming and Process Simulation of bio-based Form Sheets for Aircraft Applications (BioForS)
Legenstein, A., Salzmann, M. & Schledjewski, R., 15 Sept 2021.
Research output: Contribution to conference › Poster › Research
E-pub ahead of print
Ply-by-ply inline thermography inspection for thermoplastic automated tape layup
Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 13 Sept 2021, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 7.2021, 3-4, p. 49-59 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Bio-based Form Sheets for Aircraft Applications (BioForS)
Legenstein, A., Salzmann, M. & Schledjewski, R., 12 Sept 2021, 29th Leoben-Conference on Polymer Engineering and Science: 50 Years Polymer Engineering and Science at Montanuniversität Leoben. Friesenbichler, W. (ed.). Leoben, Vol. 10.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Holistic approach towards quality assurance for thermoplastic Automated Tape Layup
Yadav, N. & Schledjewski, R., Sept 2021.
Research output: Contribution to conference › Poster › Research
Published
In- and off-line NDT in automated in-situ consolidation tape layup
Yadav, N., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., Sept 2021, SAMPE EUROPE Conference and Exhibition 2021: Baden, Switzerland, 28-30 September 2021.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise
Yong, A., Aktas, A., May, D., Endruweit, A., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Causse, P., Chiminelli, A., Cohades, A. & Comas-Cardona, S. & 32 others, Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., Garcia-Manrique, J. A., Grishaev, V., Guilloux, A., Hancioglu, M., Harazi, W., Herman, T., Huang, W., Kabachi, M. A., Keller, A., Kind, K., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Long, A., Masania, K., Michaud, V., Middendorf, P., Salvatori, D., Schubnel, R., Sharp, N., Sozer, E. M., Thomas, J., Trochu, F., Umer, R., Valette, J., Wang, J. H. & Willenbacher, B., Sept 2021, In: Composites Part A: Applied Science and Manufacturing. 148.2021, September, 16 p., 106480.
Research output: Contribution to journal › Article › Research › peer-review
Published
Tack measurement of bindered rovings for the dry fiber winding process
Neunkirchen, S. & Schledjewski, R., Sept 2021, In: Polymer Composites. 42, 9, p. 4607-4616 10 p., 26172.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Equation for modelling energy transfers in multi-phase flows through porous media, optimised for liquid composite moulding processes
Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 20 Aug 2021, (E-pub ahead of print) In: International journal of heat and mass transfer. 181.2021, December, 8 p., 121856.
Research output: Contribution to journal › Article › Research › peer-review
Published
Natural fibre reinforced thermoplastic sheet material: Thermoforming behaviour and process simulation: Thermoforming and Process Simulation
Legenstein, A., Salzmann, M. & Schledjewski, R., 29 Jun 2021.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Spektroskopische Analyse von Prepregs (SAPP)
Salzmann, M. & Schledjewski, R., 29 Jun 2021.
Research output: Contribution to conference › Poster › Research › peer-review
Published
What to do with the waste? Options for GFRP and CFRP waste treatment along the value chain
Kirschnick, U. & Schledjewski, R., 29 Jun 2021.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Validation of Selected Optical Methods for Assessing Polyethylene (PE) Liners Used in High Pressure Vessels for Hydrogen Storage
Gąsior, P., Wachtarczyk, K., Błachut, A., Kaleta, J., Yadav, N., Ozga, M. & Baron, A., 18 Jun 2021, In: Applied Sciences : open access journal. 11.2021, 12, 20 p., 5667.
Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next

Research Portal

Chair of Processing of Composites and Design for Recycling (270)

Research output

Contact information