Chair of Physical Metallurgy (420)

Organisational unit: Chair

901 - 1000 out of 2,174Page size: 100

Research output

  1. 2014
  2. Published

    Composition induced changes in optical response of Si-doped titanium dioxide

    Ondracka, P., Holec, D., Franta, D., Kedronova, E., Elisabeth, S., Goullet, A. & Zajickkova, L., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Computational Materials Science

    Holec, D., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Computational simulation of instability phenomena in nanoparticles and nanofilms

    Todt, M., Toth, F., Hartmann, M., Holec, D., Cordill, M. J., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: Computational Technology Reviews. 10, p. 89-119

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2014, Advanced Materials Research. p. 807-812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 286-288

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Cu diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Das Ausscheidungsverhalten von Bor im Vergütungsstahl 42CrMo4

    Lorenz, R., 2014

    Research output: Thesis › Diploma Thesis

  10. Published

    Development status, applications and perspectives of advanced intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2014, Materials Science Forum. p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Die Wirkung von Bor im Vergütungsstahl 42CrMo4

    Haslberger, P., 2014

    Research output: Thesis › Diploma Thesis

  13. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001) by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Distribution of alloying elements within the constituent phases of a C-containing gamma-TiAl based alloy studied by atom probe tomography: Mater. Res. Soc. Symp. Proc. Vol.1760 2014 Materials Research Society

    Klein, T., Mendez Martin, F., Schachermayer, M., Rashkova, B., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Research

  15. Published

    Early stages of precipitation: Experiments and Modelling

    Primig, S., Leitner, H. & Kozeschnik, E., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    EBSD study of the microstructural evolution during hot compression testing of a superduplex steel

    Primig, S., Ragger, K. & Buchmayr, B., 2014, EBSD study of the microstructural evolution during hot compression testing of a superduplex stee. p. 973-979

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    EBSD Untersuchungen an warmumgeformtem Superduplexstahl

    Primig, S., Ragger, K. & Buchmayr, B., 2014, 14. Int. Metallographie-Tagung. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    EBSD Untersuchungen von warmumgeformten Superduplexstahl

    Primig, S., Ragger, K., Clemens, H. & Buchmayr, B., 2014, Sonderbände der Praktischen Metallographie 46. p. 107-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic beta-stabilized gamma-TiAl based alloy

    Schwaighofer, E., Rashkova, B., Clemens, H., Stark, A. & Mayer, S., 2014, In: Intermetallics. 46, p. 173-184

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer beta-erstarrenden gamma-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 189-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer β-erstarrenden γ-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, p. 189-194.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., Arndt, J. & Primig, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 296-297

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., Arndt, J. & Primig, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., 2014

    Research output: Thesis › Diploma Thesis

  25. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 101-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, p. 101-106.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Einfluss der pulvermetallurgischen Herstellung auf Gefüge und Eigenschaften intermetallischer Titanaluminid-Legierungen

    Gruber, M., 2014

    Research output: Thesis › Diploma Thesis

  28. Published

    Einsatz einer intermetallischen TiAl-Legierung als Turbinenradwerkstoff im Abgasturbolader für Dieselmotoren

    Themeßl, A., 2014

    Research output: Thesis › Diploma Thesis

  29. Published

    Elektrolytisches Polieren vs. Vibrationspolieren: Entwicklung einer Präparationsmethode zur EBSD-Analyse der Mo-Basislegierung MHC

    Lang, D., Schatte, J., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 59-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Entwicklung einer hochfesten und kriechresistenten γ-TiAl Basislegierung für Strahltriebwerkskomponenten

    Schwaighofer, E., 2014

    Research output: Thesis › Doctoral Thesis

  31. Published

    Evolution of precipitates and martensitic substructure during continuous heat treatment

    Mayer, W., Sackl, S. C., Shan, Y. V., Primig, S. & Kozeschnik, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Evolution of the omega-phase in a beta-stabilized multi-phase TiAl alloy and its effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Schwaighofer, E., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Evolution of the ordered omega phase in a beta-stabilized multi-phase TiAl alloy and its effect on hardness

    Schloffer, M., Rashkova, B., Schöberl, T., Schwaighofer, E., Zhang, Z., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 64, p. 241-252

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Evolution of the ω-Phase in a β-stabilized multi-phase TiAl alloy and ist effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    First principles study on the impact of chemical disorder and Mo alloying on stability of the cubic b/bo phase in TiAl

    Holec, D., Legut, D., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Fortschritte in der Metallographie 46

    Mayer, S. (Editor), Panzenböck, M. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  37. Published

    Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

    Leitner, T., Schloffer, M., Mayer, S., Eßlinger, J., Clemens, H. & Pippan, R., 2014, In: Intermetallics. 53, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Gefügecharakterisierung intermetallischer gamma-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Gefügecharakterisierung intermetallischer γ-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, p. 113-118.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    High Performance Materials

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    High-rate deposition of AlTiN and related coatings with dense morphology by central cylindrical direct current magnetron sputtering

    Jilek, Jr., M., Jilek,, M., Mendez Martin, F., Mayrhofer, P. H. & Veprek, S., 2014, In: Thin solid films. 556, p. 361-368

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    High-temperature oxidation behavior of multi-phase Mo-containing gamma-TiAl-based alloys

    Pflumm, R., Donchev, A., Mayer, S., Clemens, H. & Schütze, M., 2014, In: Intermetallics. 53, p. 45-55

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Hochtemperaturbeständigkeit und Schweißeignung einer intermetallischen TiAl-Legierung für die Anwendung als Turbinenrad im Abgasturbolader

    Samer, L., 2014

    Research output: Thesis › Diploma Thesis

  44. Published

    Hochtemperatur Laser-Scanning Konfokal-Mikroskopie zur in-situ Untersuchung von Kornwachstum und Phasenumwandlungen in intermetallischen gamma-TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 195-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, p. 297-310

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Impact of point defects on stability of (Al1-xCrx)2O3 phases from first principles

    Koller, C., Ramm, J., Polcik, P., Holec, D., Paulitsch, J. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Induction hardening vs conventional hardening of a heat treatable steel

    Sackl, S. C., Leitner, H., Zuber, M., Clemens, H. & Primig, S., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45A, p. 5657-5666

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Influence of deformation on the precipitation behavior of Nb (CN) in austenite and ferrite

    Nöhrer, M., Mayer, W., Primig, S., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45 A, p. 4210-4219

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of heat treatment on the microstructural evolution of Al-3 wt.% Cu during high-pressure torsion

    Hohenwarter, A., Faller, M., Rashkova, B. & Pippan, R., 2014, In: Philosophical magazine : Letters. 94, p. 342-350

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of microstructure on diffusion barrier properties of TiN investigated by TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Lu, J., Schalk, N., Lars, H. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    In-situ high-energy X-ray diffraction on an intermetallic β-stabilised γ-TiAl alloy

    Erdely, P., 2014

    Research output: Thesis › Diploma Thesis

  52. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation: DESY Annual Report 2013

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Transfer

  53. Published

    In-situ small-angle X-ray scattering study of the Perovskite-type carbide precipitation behavior in a carbon-containing intermetallic TiAl alloy using synchrotron radiation

    Schwaighofer, E., Staron, P., Rashkova, B., Stark, A., Schell, N., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 77, p. 360-369

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    In-situ time-temperature-transformation behaviour of an intermetallic beta-solidifying TiAl alloy using synchrotron radiation

    Erdely, P., Werner, R., Schwaighofer, E., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions

    Holec, D., Tasnádi, F., Wagner, P., Friak, M., Neugebauer, J., Mayrhofer, P. H. & Keckes, J., 2014, In: Physical review : B, Condensed matter and materials physics. 90, p. 184106-1-184106-9

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Mayer, S., Lindemann, J., Klose, J., Smarsly, W. & Guether, V., 2014, In: Intermetallics. 44, p. 128-140

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Microstructural investigation of thermally aged nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E. & Leitner, H., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 594, p. 253-259

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Microstructure and texture evolution in an intermetallic β-stabilized TiAl alloy during forging and subsequent isothermal annealing

    Gaitzenauer, A., Stark, A., Gosslar, D., Clemens, H. & Mayer, S., 2014, In: Advanced engineering materials. 16, p. 445-451

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Microstructure evolution and grain refinement process in an intermetallic TiAl alloy with high Mi content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  60. Published

    Microstructures and mechanical properties of a multi-phase beta-solidifying TiAl alloy densified by spark plasma sintering

    Voisin, T., Monchoux, J.-P., Hantcherli, M., Mayer, S., Clemens, H. & Couret, A., 2014, In: Acta materialia. 73, p. 107-115

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Mikrostrukturanalyse im Herstellungsprozess zur Qualitätskontrolle von Bauteilen der TNM-Legierung

    Wallis, C., 2014

    Research output: Thesis › Diploma Thesis

  62. Published

    Mikrostruktur - Eigenschaftsbeziehung einer warmumgeformten intermetallischen γ-TiAl-Legierung

    Lehner, A., Clemens, H., Voigt, P., Hempel, R. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  63. Published

    Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2014, In: International journal for multiscale computational engineering. 12, 1, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

    Halici, D., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications, p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 361-366

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Neue Ansätze zur Zielpräparation von Atomsondenspitzen mittels Focused Ion Beam und Durchstrahlungs-EBSD

    Babinsky, K., Haslberger, P., Turk, C., Clemens, H. & Primig, S., 2014, p. 361-366.

    Research output: Contribution to conference › Presentation › Research › peer-review

  67. Published

    New findings on the atomistic mechanisms active during mechanical milling of a Fe-Y2O3 model alloy

    Ressel, G., Parz, P., Primig, S., Leitner, H., Clemens, H. & Puff, W., 2014, In: Journal of applied physics. 115, p. 1243131-1243137

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    New findings on the mechanisms during mechanical alloying of a Fe-Y2O3 model alloy and an oxide dispersion strengthened high-alloyed steel

    Ressel, G., 2014, 155 p.

    Research output: Thesis › Doctoral Thesis

  69. Published

    On the behavior of yttria/yttrium during mechanical alloying of a Fe-Y2O3 model alloy system

    Ressel, G., Parz, P., Fian, A., Holec, D., Primig, S., Puff, W., Leitner, H. & Clemens, H., 2014, Advanced Materials Research. p. 598-603

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    On the precipitation mechanism in the molybdenum based alloy MHC (mo-HF-C)

    Lang, D., Pöhl, C., Schatte, J., Primig, S. & Leitner, H., 2014, In: Powder metallurgy progress. 57, p. 311-313

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Optical properties of HfO2 analysed using first principles calculations

    Ondracka, P., Holec, D., Franta, D., Elias, M. & Zajickkova, L., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings

    Hollerweger, R., Riedl, H., Paulitsch, J., Arndt, M., Rachbauer, R., Polcik, P., Primig, S. & Mayrhofer, P. H., 2014, In: Surface & coatings technology. 257, p. 78-86

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Oxidation and wet etching behavior of sputtered ternary molybdenum films

    Jörg, T., Hofer-Roblyek, A. M., Winkler, J., Mitterer, C. & Köstenbauer, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  74. Published

    Oxidation protection of multiphase Mo containing gamma-TiAl based alloys

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Oxygen impurity related hardening mechanisms of Ti-Al-N thin films

    Riedl, H., Koller, C., Rachbauer, R., Kolozsvari, S., Mendez Martin, F. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. Published

    Phase and interstitial element characterization via atom probe tomography in a multi-phase TiAl based alloy

    Mendez Martin, F., Klein, T., Schachermayer, M., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  77. Published

    Phasenumwandlungen und Kornwachstumsverhalten in β-stabilisierten TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  78. Published

    Phase transformations and grain growth behaviour in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    Phase transformations and grain growth in beta-stabilized TiAl alloys

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 289-290

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 71-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Präparation von karbidfreien bainitischen Stählen für EBSD-Untersuchungen

    Hofer, C., Clemens, H. & Primig, S., 2014, p. 71-76.

    Research output: Contribution to conference › Presentation › Research › peer-review

  82. Published

    Precipitation behavior of strain-induced V preicipitates in ferrite at different temperatures in a 0.2wt% carbon steel

    Nöhrer, M., Mayer, W., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Steel research international. 85, p. 679-688

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Simulation of yield strength in Allvacspi® 718Plus™

    Ahmadi, M. R., Whitmore, L., Povoden-Karadeniz, E., Stockinger, M., Falahati, A. & Kozeschnik, E., 2014, THERMEC 2013 Supplement. Trans Tech Publications, p. 7-12 6 p. (Advanced Materials Research; vol. 922).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Structural and mechanical evolution of reactively and non-reactively sputterd Zr-Al-N thin films during annealing

    Mayrhofer, P. H., Sonnleitner, D., Bartosik, M. & Holec, D., 2014, In: Surface & coatings technology. 244, p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Structural stability and thermodynamics of CrN magnetic phases from ab initio calculations and experiment

    Zhou, L., Körmann, F., Holec, D., Bartosik, M., Grabowski, B., Neugebauer, J. & Mayrhofer, P. H., 2014, In: Physical review : B, Condensed matter and materials physics. 90, p. 184102-1-184102-12

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Structural stability and thermodynamics of CrN magnetic phases from first principles

    Holec, D., Zhou, L., Bartosik, M., Körmann, F., Grabowski, B., Neugebauer, J. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  87. Published

    Structure and mechanical properties of Ta alloyed Cr-Al-N coatings

    Hollerweger, R., Zhou, L., Holec, D., Rachbauer, R., Polcik, P. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    Studies on ductile damage and flow instabilities during hot deformation of a multiphase ã-TiAl alloy

    Halici, D., Zamani, H. A., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Material Forming ESAFORM 2014. Trans Tech Publications, p. 99-105 7 p. (Key Engineering Materials; vol. 611-612).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    The effect of interlayer composition and thickness on the stabilization of cubic AlN in AlN/Ti-Al-N superlattices

    Chawla, V., Holec, D. & Mayrhofer, P., 2014, In: Thin solid films. 565, p. 94-100

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    The effect of Zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy

    Ressel, G., Primig, S. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, p. 1552-1558

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    The microstructure of heat-treated nickel-based superalloy 718Plus

    Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M. & Kozeschnik, E., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 610, p. 39-45

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    The origin of carbon nanotubes G-mode upshift under pressure: out -of-plane compression effects in in-plane bond strength

    Sun, Y. W., Holec, D. & Dunstan, D. J., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  93. Published

    Thermal properties of Ti-Al alloys: A combined theoretical and experimental approach

    Holec, D., Schmölzer, T., Legut, D., Staron, P. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    The use of in-situ characterization techniques for the development of intermetallic titanium aluminides

    Mayer, S., Schwaighofer, E., Schloffer, M. & Clemens, H., 2014, Materials Science Forum. p. 2097-2102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Untersuchung des Selbstanlasseffektes von Martensit mit Hilfe von Atomsondentomographie

    Sackl, S. C., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 209-214

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Verein Leobener Werkstoffwissenschafter - Rückblick und Vorschau anlässlich des 25jährigen Bestehens

    Clemens, H., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 395-396

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Widmannstätten austenite formation in a superduplex steel

    Primig, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  98. 2013
  99. Published

    Corrosion fatigue properties of austenitic stainless steels with different composition and strength in chloride solutions

    Visser, A., Vichytil, C., Mori, G., Vidic, J., Pippan, R., Panzenböck, M. & Kapp, M., 1 Dec 2013, EUROCORR 2013 - European Corrosion Congress. (EUROCORR 2013 - European Corrosion Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    3D Characterization of an Intermetallic beta/gamma-Titanium aluminide alloy

    Engstler, M., Mayer, S., Pauly, C., Clemens, H. & Mücklich, F., 2013, In: Advanced engineering materials. 15, p. 1125-1128

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    59. Metallkunde-Kolloquium - Abstractband

    Mitterer, C. (Editor) & Clemens, H. (Editor), 2013, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  102. Published

    Ab initio study of the alloying effect of transition metals on structure, stability and ductility of CrN

    Zhou, L., Holec, D. & Mayrhofer, P. H., 2013, In: Journal of physics / D, Applied physics. 46, p. 3653011-3653017

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...6 7 8 9 10 11 12 13 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben