Chair of Physical Metallurgy (420)

Organisational unit: Chair

1501 - 1550 out of 2,175Page size: 50

Research output

  1. 2008
  2. Published

    Observation of the precipitation behaviour of Fe-25Co-15Mo by SANS and 3DAP

    Eidenberger, E., Stergar, E., Staron, P., Leitner, H. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    On the Formation of Ordered w-phase in High Nb Containing γ-TiAl Based Alloys”

    Stark, A., BARTELS, A., Clemens, H. & Schimansky, F.-P., 2008, In: Advanced engineering materials. 10, p. 929-934

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    On the influence of coating and oxidation on the mechanical properties of a gamma-TiAl based alloy

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008, In: Intermetallics. 16, p. 1206-1211

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    On the Infuence of Nb and C on the Phase Transition Temperatures in gamma-TiAl Based Alloys

    Chladil, H., Clemens, H., Wallgram, W., Kremmer, S., Bartels, A., Gerling, R. & Kozeschnik, E., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 169-177

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    On the overaging behaviour of tool steel X38CrMoV5-3

    Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, p. 148-152

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Österreichs erfolgreichste Jungwissenschaftler

    Mayrhofer, P. H., 2008, In: Kurier. Karriere, 26.01.2008, p. 2-2

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Oxidation and diffusion processes during annealing of AlCrVN hard coatings

    Franz, R., Neidhardt, J., Mitterer, C., Schaffer, B., Hutter, H., Kaindl, R., Sartory, B., Tessadri, R., Lechthaler, M. & Polcik, P., 2008, In: Journal of vacuum science & technology / A (JVST). A26, p. 302-308

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Oxidation and interdiffusion studies of (Cr1-xAlx)1-yYyN films on y-TiAI

    Rovere, F., Moser, M., Mayrhofer, P. H. & Braun, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Oxidation behavior of Ti-Al-Si-N and Ti-Al-B-N coatings

    Zechner, J., 2008

    Research output: Thesis › Diploma Thesis

  11. Published

    Oxidation behaviour of the y-TiAl based alloy Ti-45Al-8Nb coated with TiAlYN and CrAlYN thin films

    Braun, R., Müßener, D., Moser, M., Rovere, F., Mayrhofer, P. H. & Leyens, C., 2008, TMS. p. 289-296

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Oxidation behaviour of the γ-TiAl based alloy Ti-45Al-8Nb deposited with TiAlYN and CrAlYN

    Braun, R., Müßener, D., Moser, M., Rovere, F., Mayrhofer, P. H. & Leyens, C., 2008, Structural aluminides for elevated temperatures. p. 289-296

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Oxidation behaviour of TiAlYN and CrAlYN nanocomposite coatings deposited on y-TiAl alloy Ti-45Al-8Nb based alloy Ti-45Al-8Nb

    Braun, R., Müßener, D., Moser, M., Rovere, F., Mayrhofer, P. H. & Leyens, C., 2008, The Minerals, Metals & Materials Society, 137th annual meeting proceedings . TMS, p. 289-296

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Oxidation Resistance and Ductility of a Coated gamma-TiAl Based Alloy

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 268-272

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Physisorbed Films in Periodic Mesoporous Silica Studies by in-situ Small-Angle Diffraction using Synchroron Radiation

    Zickler, G., Jähnert, S., Wagermaier, W., Funari, S. S., Findenegg, G. H. & Paris, O., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Precipitates in a Fe-Co-Mo alloy characterized by complementary methods

    Eidenberger, E., Stergar, E., Leitner, H., Scheu, C., Staron, P. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 247-252

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Precipitation behaviour of an Fe-Co-Mo-alloy during non-isothermal ageing

    Leitner, H., Schober, M., Clemens, H., Caliskanoglu, D. & Danoix, F., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 367-374

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Ru alloyed TiAlN and CrAlN coatings prepared by cathodic arc evaporation

    Pohler, M., 2008

    Research output: Thesis › Diploma Thesis

  19. Published

    Sputtered TiN/Cu multilayers and nanocomposites: structure, stresses and tribological properties

    Hofer-Roblyek, A. M., 2008

    Research output: Thesis › Diploma Thesis

  20. Published

    Structural evolution of protective coatings for gamma-TiAl based alloys

    Moser, M., 2008, 165 p.

    Research output: Thesis › Doctoral Thesis

  21. Published

    Structure and mechanical properties of CrN/TiN multilayer coatings prepared by a combined HIPIMS/UBMS deposition technique

    Paulitsch, J., Mayrhofer, P. H., Münz, W.-D. & Schenkel, M., 2008, In: Thin solid films. 517, p. 1239-1244

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Structure and phase evolution of Cr-Al-N coatings during annealing

    Mayrhofer, P. H., Willmann, H. & Reiter, A. E., 2008, In: Surface & coatings technology. 202, p. 4935-4938

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Structure and thermal stability of arc evaporated (Ti0.33Al0.67)1-xSixN thin films

    Flink, A., Andersson, J. M., Alling, B., Daniel, R., Sjölen, J., Karlsson, L. & Hultmann, L., 2008, In: Thin solid films. 517, p. 714-721

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Structure-Property relations in ZrCN coatings for tribological applications

    Silva, E., Rebelo De Figueiredo, M., Galindo, R. E., Carvalho, S., Mendonca, J. P., Espinosa, A., Franz, R., Mitterer, C. & Oliveira, J. C., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Structure-property relations of arc-evaporated Al-Cr-Si-N coatings

    Soldan, J., Neidhardt, J., Sartory, B., Kaindl, R., Cerstvy, R., Mayrhofer, P. H., Tessadri, R., Polcik, P., Lechthaler, M. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3555-3562

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Synthesis and characterisation of sputtered hard coatings of Cr-N/MoSx

    Budna, K., Walter, C., Spicak, R. & Mitterer, C., 2008, In: Surface engineering. 24, p. 350-354

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Synthesis and characterization of Cr-B-N coatings deposited by reactive arc-evaporation

    Polychronopoulou, K., Neidhardt, J., Rebholz, C., Baker, M. A., O'Sullivan, M., Reiter, A., Gunnaes, A. E., Giannakopoulos, K. & Mitterer, C., 2008, In: Journal of materials research (JMR). 23, p. 3048-3055

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Synthesis-structure-property relations for Cr-B-N coatings sputter deposited reactively from a Cr-B target with 20 at% B

    Budna, K., Neidhardt, J., Mayrhofer, P. H. & Mitterer, C., 2008, In: Vacuum. 82, p. 771-776

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Synthesis-structure relations for reactive magnetron sputtered V2O5 films

    Fateh, N., Fontalvo, G., Cha, L., Klünsner, T., Hlawacek, G., Teichert, C. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 1551-1555

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Temperature dependence of residual stress gradients in shot-peened steel coated with CrN

    Daniel, R., Keckes, J., Kirchlechner, C., Maier, G., Martinschitz, K. J. & Mitterer, C., 2008, In: Materials Science Forum .

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Texture Formation in high-Nb Containing gamma-TiAl Alloys during Hot Rolling

    Stark, A., Bartels, A., Gosslar, D., Schimansky, F.-P., Gerling, R. & Clemens, H., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 197-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    The effect of deposition temperature on microstructure and properties of thermal CVD TiN coatings

    Wagner, J., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2008, In: International journal of refractory metals & hard materials. 26, p. 120-126

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    The effect of yttrium incorporation on the oxidation resistance of Cr-Al-N coatings

    Rovere, F., Mayrhofer, P. H., Reinholdt, A., Mayer, J. & Schneider, J. M., 2008, In: Surface & coatings technology. 202, p. 5870-5875

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The influence of age-hardening on turning and milling performance of Ti–Al–N coated inserts

    Chen, L., Du, Y., Mayrhofer, P. H., Wang, S. Q. & Li, J., 2008, In: Surface & coatings technology. 202, p. 5158-5161

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Theoretical study of strain effects on elnes and electronic structure of AIgaN

    Holec, D., Petrov, M., Lymperakis, L., Humphreys, C. J. & Neugebauer, J., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Thermal- and Stress-induced Formation of Ordered omega-phase in Nb-rich gamma-TiAl Based Alloys

    Stark, A., Bartels, A., Schimansky, F.-P., Gerling, R. & Clemens, H., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 145-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Thermal decomposition routes of CrN hard coatings synthesized by reactive arc evaporation and magnetron sputtering

    Ernst, W., Neidhardt, J., Willmann, H., Sartory, B., Mayrhofer, P. H. & Mitterer, C., 2008, In: Thin solid films. 517, p. 568-574

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Thermal fatigue behaviour of hot-work tool steels: heat check nucleation and growth

    Ebner, R. & Marsoner, S., 2008, In: International journal of microstructure and materials properties (IJMMP). 3, p. 182-194

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Thermal stability and age hardening of metastable hard coatings

    Mayrhofer, P. H., 2008, Materials and Technology. p. 84-85

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Thermal stability and thermo-mechanical properties of magnetron sputtered Cr-Al-Y-N coatings

    Rovere, F. & Mayrhofer, P. H., 2008, In: Journal of vacuum science & technology / A (JVST). A26, p. 29-35

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Titanium doped CVD alumina coatings

    Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H.-P. & Kathrein, M., 2008, In: Surface & coatings technology. 203, p. 350-356

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-Ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Transmission electron microscopy of nanocomposite Cr-B-N thin films

    Hegedüs, E., Kovács, I., Pecz, B., Toth, L., Budna, K. & Mitterer, C., 2008, In: Vacuum. 82, p. 209-213

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Transmission electron microscopy studies and simulation of the indentation response of superelastic fullerenelike carbon nitride thin films

    Neidhardt, J., Walter, C., Molina-Aldareguia, J. M., Herrmann, M., Clegg, W. J. & Hultman, L., 2008, In: Journal of applied physics. 103, p. 123515-1-123515-8

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Tribological behavior of sputtered CrAlNbN hard coatings at elevated temperatures

    Fontalvo, G. & Mitterer, C., 2008, Proceedings of CIST 2008. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Tribological properties of reactive magnetron sputtered V2O5 and VN-V2O5 coatings

    Fateh, N., Fontalvo, G. & Mitterer, C., 2008, In: Tribology Letters. 30, p. 21-26

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Ultra hochfester Stahl und optimierte Wärmebehandlungen für Motorsportanwendungen

    Dipolt, C., 2008, 90 p.

    Research output: Thesis › Diploma Thesis

  48. Published

    Untersuchung und Verifizierung des quasibinären Zustandsdiagramms für Beta-erstarrende TNM-Legierung auf Basis von Ti-(41-45)Al-4Nb-1Mo-0,1B

    Böck, B., 2008, 104 p.

    Research output: Thesis › Diploma Thesis

  49. Published

    Zum Kurzzeitkriechverhalten von Warmarbeitsstählen

    Stergar, E., Panzenböck, M., Leitner, H., Wurmbauer, H., Scheu, C. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 342-346

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    δ-Phase characterization of superalloy allvac 718 PlusTM

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS 2008. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. 2007
  52. Published

    Legierung für Wälzlager

    Rabitsch, R. (Inventor), Peißl, S. K. (Inventor), Ebner, R. (Inventor) & Eglsäer, S. (Inventor), 15 Mar 2007

    Research output: Patent

Previous 1...27 28 29 30 31 32 33 34 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben