Chair of Physical Metallurgy (420)

Organisational unit: Chair

1351 - 1400 out of 2,175Page size: 50

Research output

  1. 2009
  2. Published

    High carbon solubility in a y-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening

    Scheu, C., Stergar, E., Schober, M., Cha, L., Clemens, H., Bartels, C., Schimansky, F.-P. & Cerezo, A., 2009, In: Acta materialia. 57, p. 1504-1511

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    High temperature sputter deposition of Ti1-xAlxN coatings on powder metallurgical high speed steels

    Weirather, T., Kutschej, K., Caliskanoglu, D., Cremer, R., Kölker, W., Kohlscheen, J. & Mitterer, C., 2009, Proceedings of the 8th International Tooling Conference. p. 881-889

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Homogeneity of industrial scale thermal CVD processes for TiCN hard coatings

    Czettl, C., Mitterer, C., Michotte, C., Penoy, M. & Kathrein, M., 2009, proc. 17th International Plansee Seminar. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Homogeneity of Industrial Scale Thermal CVD Processes for TiCN Hard Coatings

    Czettl, C., Mitterer, C., Penoy, M., Michotte, C. & Kathrein, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Hot-die Forging of a beta-stabilized gamma-TiAl Based Alloys

    Wallgram, W., Kremmer, S., Clemens, H., Otto, A. & Güther, V., 2009, Hot-die Forging of a beta-stabilized gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 109-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Improved oxidation resistance of TiAlN coatings by doping with Si or B

    Pfeiler, M., Zechner, J., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2009, In: Surface & coatings technology. 203, p. 3104-3110

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of alloying elements on the martensitic and bainitic structure of hot work Tool steels

    Siller, I., Mayer, S., Caliskanoglu, D. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 635-642

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Influence of deposition conditions on texture development and mechanical properties of TiN coatings

    Mayrhofer, P. H., Geier, M., Löcker, C. & Chen, L., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1052-1058

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Influence of Dopants in Oxide-based Coatings Deposited by Thermal CVD

    Schlögl, M., 2009, 84 p.

    Research output: Thesis › Diploma Thesis › peer-review

  11. Published

    Influence of heat treatment on the microstructure and toughness of din 1.2083 - type plastic mould steels

    Perko, J., Leitner, H., Strobl, V., Schneider, R. & List, M., 2009, Proceedings of the 8th International Tooling Conference. p. 597-609

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Influence of phase transition on the tribological performance of arc-evaporated AlCrVN hard coatings

    Franz, R., Neidhardt, J., Kaindl, R., Sartory, B., Tessadri, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 1101-1105

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of powder nitriding on the microstructure of a ledeburitic Tool steel

    Zuber, M., Schweiger, H. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 345-355

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    In Situ Characterization of a Nb and Mo Containing y-TiAl Based Alloy Using Neutron Diffraction and High-Temperature Microscopy

    Watson, B. I. J., Liss, K.-D., Clemens, H., Wallgram, W., Schmölzer, T., Hansen, T. C. & Reid, M., 2009, In: Advanced engineering materials. 11, p. 932-937

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    In situ study of dynamic recrystallization and hot deformation behavior of a multiphase titanium aluminide alloy

    Liss, K.-D., Schmölzer, T., Yan, K., Reid, M., Peel, M., Dippenaar, R. & Clemens, H., 2009, In: Journal of applied physics. 106, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Intermetallic NiAl precipitate analysis by means of atom probe and complementary methods

    Lerchbacher, C., 2009, 87 p.

    Research output: Thesis › Diploma Thesis › peer-review

  17. Published

    Intermetallische TiAl-Legierungen

    Schmölzer, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Intermetallische Werkstoffe, Flugzeugtriebwerke, Nano und Klimaschutz - ein Widerspruch

    Clemens, H., 2009, Werkstoff- und Nanotechnologien - Rohstoff für Innovationen. p. 19-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Investigations on the Precipitation Kinetics of a FeMoCr alloy

    Stergar, E., Eidenberger, E., Zickler, G., Leitner, H. & Caliskanoglu, Z. D., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Low friction CrN/TiN multilayer coatings prepared by a hybrid HIPIMS/UBMS deposition process

    Paulitsch, J., Mayrhofer, P. H. & Schenkel, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Low temperature oxidation of sputtered thin films of molybdenum alloys

    List, A. F., 2009, 74 p.

    Research output: Thesis › Diploma Thesis › peer-review

  22. Published

    M312 "Identification of the different reactions taking place during a thermal treatment in order to obtain nanostructured hard coatings with optimised thermal stability, clarification of structural processes during a thermal treatment"

    Mayrhofer, P. H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Mechanismen der tribologischen Selbstadaption - ein Weg zu multifunktionellen Hartstoffschichten für Werkzeuge und Bauteile

    Mitterer, C., 2009,

    Gef?ge & Bruch

    .     p. 221-229

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Microstructural evolution during growth of polycrystallin CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Microstructural evolution during growth of polycrystalline CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring. p. 9-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Microstructure and mechanical properties of the superalloy ATI Allvac 718PlusTM

    Zickler, G., Schnitzer, R., Radis, R., Hochfellner, R., Schweins, R., Stockinger, M. & Leitner, H., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 295-303

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Microstructure and Tensile Ductility of a Ti-43Al-4Nb-1Mo-0.1B Alloy

    Drössler, L. M., Schmölzer, T., Wallgram, W., Cha, L., Das, G. & Clemens, H., 2009, Microstructure and Tensile Ductility of a Ti-43Al-4Nb-1Mo-0.1B Alloy. Materials Research Society : MRS, p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Microstructure and Texture Formation During Near Conventional Forging of an Intermetallic Ti-45Al-5Nb Alloy

    Stark, A., Bartels, A., Clemens, H., Kremmer, S., Schimansky, F.-P. & Gerling, R., 2009, In: Advanced engineering materials. 11, p. 976-981

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Microstructure Evolution during Aging of two different Stainless Maraging Steels

    Schober, M., Schnitzer, R. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 478-481

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Microstructure related stress state in magnetron sputtered thin films

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring Meeting. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In: Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Milestone 3.2.4 "Explanation of mechanical deformation mechanisms of the coatings in a materials science and advanced surface engineering context (for the last advanced coatings)"

    Mayrhofer, P. H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    New sample environments for in-situ materials science synchrotron radiation studies

    Lippmann, T., Fischer, T., Staron, P., Zickler, G., Schnitzer, R., Martins, R. V., Stark, A., Oehring, M., Bergmann, L., dos Santos, J., Pyczak, F., Müller, M., Clemens, H. & Schreyer, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Novel technique to determine elastic constants of thin films

    Martinschitz, K., Daniel, R., Mitterer, C. & Keckes, J., 2009, Material Research Society Symposium Proceedings 1139. p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Novel technique to determine elastic constants of thin films

    Daniel, R., Keckes, J., Martinschitz, K. J. & Mitterer, C., 2009, In: Materials Research Society symposium proceedings.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Numerical Studies on Crack Arrays in Aluminum Pressure Die Casting Molds

    Raninger, P., 2009, 153 p.

    Research output: Thesis › Diploma Thesis › peer-review

  37. Published

    On the effect of Ta on improved oxidation resistance of Ti-Al-Ta-N coatings

    Pfeiler, M., Scheu, C., Hutter, H., Schnöller, J., Michotte, C., Mitterer, C. & Kathrein, M., 2009, In: Journal of vacuum science & technology / A (JVST). 27, p. 554-560

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    On the Recrystallization Behavior of Technically Pure Molybdenum

    Primig, S., Leitner, H., Rodriguez Chavez, A., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2009, proc. in 17 th Plansee Seminar. p. 15/1-15/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Pore Structure and Fluid Sorption in Ordered Mesoporous Silica. I. Experimental Study by in situ Small-Angle X-ray Scattering

    Jähnert, S., Müter, D., Prass, J., Zickler, G. A., Paris, O. & Findenegg, G. H., 2009, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 113, 34, p. 15201-15210

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Precipitation evolution in a Ti-free and Ti-containing stainless maraging steel

    Schober, M., Schnitzer, R. & Leitner, H., 2009, In: Ultramicroscopy. p. 553-562

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Reverted Austenite and its Transformation Behaviour during Deformation in a PH 13-8 Mo Maraging Steel

    Schnitzer, R., Zickler, G., Hochfellner, R., Nöhrer, M., Zinner, S. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 462-465

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Room-Temperature Deposition of DLC Films by an Ion Beam Method, Reactive Magnetron Sputtering and Pulsed Laser Deposition: Process Design, Film Structure and Film Properties

    Kahn, M., 2009

    Research output: Thesis › Doctoral Thesis

  43. Published

    Rückumgewandelter Austenit in Maraging Stählen

    Nöhrer, M., 2009

    Research output: Thesis › Diploma Thesis

  44. Published

    Ruthenium containing Ti-Al-N hard coatings

    Pohler, M., Michotte, C., Penoy, M., Mitterer, C. & Kathrein, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Ruthenium containing Ti-Al-N hard coatings

    Pohler, M., Michotte, C., Penoy, M., Mitterer, C. & Kathrein, M., 2009, proc. 17th International Plansee Seminar. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Selbstadaptive Schutzschichten

    Mitterer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Self-lubricating chromium carbide/amorphous hydrogenated carbon nanocomposite coatings: a new alternative to tungsten carbide/amorphous hydrogenated carbon

    Mitterer, C., Lechthaler, M., Gassner, G., Fontalvo, G., Toth, L., Pecz, B., Raible, M., Maier, K. & Bergmann, E., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 751-757

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Sensitivity and Quantitativity in Atom Probe Tomography

    Danoix, F., Bostel, A., Leitner, H., Jessner, P., Sauvage, X., Gouné, M. & Danoix, R., 2009, In: Microscopy and microanalysis. p. 258-259

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Short-term creep behavior of a Cr Mo V hot-work tool steel

    Wurmbauer, H., Leitner, H., Panzenböck, M., Scheu, C. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1066-1073

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Small scale materials testing for large scale application

    Stergar, E., Vieh, C., Hosemann, P., Leitner, H. & Maloy, S. A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Structural and mechanical properties of diamond-like carbon films deposited by an anode layer source

    Kahn, M., Cekada, M., Schoeberl, T., Berghauser, R., Mitterer, C., Bauer, C., Waldhauser, W. & Brandstätter, E., 2009, In: Thin solid films. 517, p. 6502-6507

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...24 25 26 27 28 29 30 31 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben