Chair of Physical Metallurgy (420)
Organisational unit: Chair
Research output
- 2007
- Published
Spin-misalignment scattering in a precipitation-hardened steel
Eidenberger, E., Bischof, M., Staron, P., Leitner, H., Michels, A., Granitzer, P., Rumpf, K., Scheu, C. & Clemens, H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Spinodal decomposition of cubic Ti1-xAlxN: Comparison between experiments and modeling
Mayrhofer, P. H., Hultman, L., Schneider, J. M., Staron, P. & Clemens, H., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1054-1059Research output: Contribution to journal › Article › Research › peer-review
- Published
Structural and mechanical properties of dc and pulsed dc reactive magnetron sputtered V2O5 films
Fateh, N., Fontalvo, G. & Mitterer, C., 2007, In: Journal of physics / D, Applied physics. 40, p. 7716-7719Research output: Contribution to journal › Article › Research › peer-review
- Published
Structural, Mechanical and Tribological Properties of (Ti,Al)N and (Ti,Al,Ta)N Coatings
Wagner, J., 2007Research output: Thesis › Diploma Thesis
- Published
Structure and mechanical properties of ZrAlY(O,N) thin films
Moser, M., Fateh, N. & Mayrhofer, P. H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Structure Models of Massively Transformed High Niobium Containing TiAl Alloys
Scheu, C., Cha, L., Sturm, S., Chladil, H., Mayrhofer, P. H., Clemens, H., Wolf, W. & Podloucky, R., 2007, MRS Fall Meeting. Materials Research Society : MRS, p. II05-01-II05-06Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Texture Formation in High Niobium Containing TiAl Alloys
Stark, A., Bartels, A., Schimansky, F.-P. & Clemens, H., 2007, MRS Fall Meeting. Materials Research Society : MRS, p. II07-01-II07-12Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
The beneficial effect of high-temperature oxidation on the tribological behaviour of V and VN coatings
Fateh, N., Fontalvo, G., Gassner, G. & Mitterer, C., 2007, In: Tribology Letters. 28, p. 1-7Research output: Contribution to journal › Article › Research › peer-review
- Published
The feneficial effect of high-temperature oxidation on the tribological behaviour of V and VN coatings
Fateh, N., Fontalvo, G. & Mitterer, C., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
The influence of bias voltage on structure and mechanical/tribological properties of arc evaporated Ti-Al-V-N coatings
Pfeiler, M., Kutschej, K., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2007, In: Surface & coatings technology. 202, p. 1050-1054Research output: Contribution to journal › Article › Research › peer-review
- Published
The Influence of Spin-misalignment Scattering on the SANS Data Evolution of Martensitic Age-hardening Steels
Bischof, M., Staron, P., Michels, A., Granitzer, P., Rumpf, K., Leitner, H., Scheu, C. & Clemens, H., 2007, In: Acta materialia. 55, p. 2637-2646Research output: Contribution to journal › Article › Research › peer-review
- Published
The influence of Yttrium on the structure evolution and thermo-mechanical behaviour of magnetron sputtered Cr-Al-N coatings
Rovere, F. & Mayrhofer, P. H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Thermal Diffusivity of the Aluminium Alloy A-17Si-4Cu (A390) in the solid and Liquid States
Kaschnitz, E. & Ebner, R., 2007, In: International journal of thermophysics. 28, p. 711-722Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermally induced transitions of CrN thin films
Mayrhofer, P. H., Rovere, F., Moser, M., Strondl, C. & Tietema, R., 2007, In: Scripta materialia. 57, p. 249-252Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal stability and age hardening of supersaturated AlCrN hard coatings
willmann, H., Mayrhofer, P. H., Hultman, L. & Mitterer, C., 2007, In: International heat treatment and surface engineering. 1, p. 75-79Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal stability of nanocomposite CrC/a-C:H thin
Gassner, G., Mayrhofer, P. H., Patscheider, J. & Mitterer, C., 2007, In: Thin solid films. 515, p. 5411-5417Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal stability of sputtered alumina films
Edlmayr, V., Walter, C. & Mitterer, C., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Thermal stability of sputtered intermetallic Al-Au coatings
Moser, M., Mayrhofer, P. H., Rainforth, W. M. & Ross, I. M., 2007, In: Journal of vacuum science & technology / A (JVST). p. 1402-1406Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal Stability of Sputtered W-Si-N Coatings
Fadenberger, K., Rebholz, C., Baker, M. A., Daniel, R., Musil, J., Mayrhofer, P. H. & Mitterer, C., 2007, 34 th International Conference on Metallurgical Coatings and Thin Films. p. 36-36Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Thermal stability of superhard Ti-B-N coatings
Mayrhofer, P. H. & Stoiber, M., 2007, In: Surface & coatings technology. 201, p. 6148-6153Research output: Contribution to journal › Article › Research › peer-review
- Published
Tiefgang an der Oberfläche - "Steirer des Tages"
Mayrhofer, P. H., 2007, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. p. 15-15Research output: Contribution to journal › Article › Research › peer-review
- Published
Training workshop at MUL ; Deliverable 9.1.10
Mayrhofer, P. H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Tribological properties of nanocomposite CrCx/a-C:H thin films
Gassner, G., Patscheider, J., Mayrhofer, P. H., Sturm, S., Scheu, C. & Mitterer, C., 2007, In: Tribology Letters. 27, p. 97-104Research output: Contribution to journal › Article › Research › peer-review
- Published
Tribological properties of reactive magenetron sputtered V2O5 and VN-V2O5 coatings
Fateh, N., Fontalvo, G. & Mitterer, C., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Tribology of arced and sputtered Ti-C-N hard coatings
Rebelo De Figueiredo, M., Neidhardt, J. & Mitterer, C., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Untersuchung des Niederdruckaufkohlverhaltens von korrosionsträgen, randschichthärtbaren Lagerwerkstoffen für den Einsatz in Flugzeugtriebwerken
Schmiedhofer, U., 2007, 138 p.Research output: Thesis › Diploma Thesis
- Published
Untersuchungen an Fehlerstromschaltern
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Untersuchungen an hochfesten Drähten
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Untersuchungen an Schweißnähten
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Untersuchungen zum Rekristallisationsverhalten von Molybdän
Loidl, M., 2007Research output: Thesis › Diploma Thesis
- Published
Werkstoffberatung
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Werkstoffberatung für Zahnräder und Fertigung
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Werkstoffforschung mit Synchrotronstrahlung
Zickler, G., Clemens, H. & Schreyer, A., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152.2007, 9, p. 282-286 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Wirtschaft Spezial "Start-Forschungspreis geht an Leobener Wissenschafter"
Mayrhofer, P. H., 2007, In: Meine Woche / Leoben. 19.11.2007, p. 26-26Research output: Contribution to journal › Article › Research › peer-review
- Published
Wöhleruntersuchungen an hochfesten austenitischen Werkstoffen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Wöhleruntersuchungen an hochfesten austenitischen Werkstoffen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Wöhleruntersuchungen an hochlegierten austenitischen Werkstoffen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Yttrium-induced structural changes in sputtered Ti1-xAlxN thin films
Moser, M. & Mayrhofer, P. H., 2007, In: Scripta materialia. 57, p. 357-360Research output: Contribution to journal › Article › Research › peer-review
- Published
Zugversuche an Blechen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Zugversuche an hochfesten Blechen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Zugversuche an hochfesten Blechen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Zwischenbericht - CD-Labor Advanced Hard Coatings
Mitterer, C., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- 2006
- Published
Blood Pump in particular pneumatic heart assist device
Ebner, R. (Inventor), Kustosz, R. (Inventor), Lackner, J. (Inventor), Major, B. (Inventor), Religa, Z. (Inventor), Stolarzewicz, B. (Inventor), Waldhauser, W. (Inventor) & Wierzchon, T. (Inventor), 18 May 2006, Patent No. PCT/PL2005/000073Research output: Patent
- Published
52. Metallkunde-Kolloquium - Abstractband
Clemens, H. (Editor) & Kneißl, A. (Editor), 2006, Leoben: Eigenverlag.Research output: Book/Report › Anthology › Research
- Published
Ab Initio Calculated Binodal and Spinodal of Cubic Ti1-xAlxN
Mayrhofer, P. H., Music, D. & Schneider, J. M., 2006, In: Applied physics letters. 88, p. 071922-1-071922-3Research output: Contribution to journal › Article › Research › peer-review
- Published
Analysen an galvanischen Schichten - Bericht 1
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Analysen an galvanischen Schichten - Bericht 2
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Analysen an galvanischen Schichten - Bericht 3
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Analysen an galvanischen Schichten - Bericht 4
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Analysen und Kohlenstoffequivalent von geschweissten Kesselblechen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Annealing studies of nanocomposite Ti-Si-C thin films with respect to phase stability and tribological performance
Rester, M., Neidhardt, J., Eklund, P., Emmerlich, J., Ljungcrantz, H., Hultman, L. & Mitterer, C., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 90-95Research output: Contribution to journal › Article › Research › peer-review
- Published
A reconsideration of the relationship between the crystallite size La of carbons determined by X-ray diffraction and Raman spectroscopy
Zickler, G., Smarsly, B., Gierlinger, N., Peterlik, H. & Paris, O., 2006, In: Carbon. 44, p. 3239-3245Research output: Contribution to journal › Article › Research › peer-review
- Published
Atomistische Vorgänge in metastabilen Hartstoffschichten - Atomic procedures in metastable hard coatings
Mayrhofer, P. H., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Atom-Probe Tomography Investigation of the Precipitation Behavior in a Nickel and Aluminium
Akre, J., Danoix, F., Erlach, S. D., Leitner, H. & Auger, P., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 651-659Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Availability of activation energy of reactions in selected optimized coatings
Mayrhofer, P. H., Moser, M. & Rovere, F., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Availability of suitable data on thermal stability to further optimize coatings - Part II
Mayrhofer, P. H., Moser, M. & Rovere, F., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Availability of suitable data on thermal staility to further optimise coatings
Mayrhofer, P. H., Moser, M. & Rovere, F., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bauteiluntersuchungen von Kleingeräten
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bauteilversuche an lasergeschweissten Blechen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Begutachten von Bauteilen und Schweissverbindungen von Solaranlagen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Begutachtung von Stahlprofilen an Hochspannungsmasten, Gittermasten
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bericht über die Kooperationsanbahnung
Fontalvo, G., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bericht über die Kooperationsanbahnung
Mitterer, C., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bericht über die Kooperationsanbahnung mit der Firma SVS Vacuum Coating Technologies GmbH & Co. KG
Mayrhofer, P. H., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung der Übergangstemperatur und fraktographische Untersuchungen an Werkzeugstählen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung mechanischer Kennwerte hochfester Drähte
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bestimmung mechanischer Kennwerte hochfester Stahlbänder
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Beurteilung der Wasserstoffversprödung an feuerverzinkten Teilen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Beurteilung von Fangteilen an Liftanlagen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Beurteilung von Geländerteilen für Aussenbereiche
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Beurteilung von Magnetitschichtdicken
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Bewertung einer selbstreduzierenden Oberflächenschicht für Tantal - Drähte
Egger, R., 2006Research output: Thesis › Diploma Thesis
- Published
Biocompatibile TiN-based novel nanocrystalline films
Ebner, R., Lackner, J. M., Waldhauser, W., Major, R., Czarnowska, E., Kustosz, R., Lacki, P. & Major, B., 2006, In: Bulletin of the Polish Academy of Sciences / Technical sciences. 54, p. 167-173Research output: Contribution to journal › Article › Research › peer-review
- Published
Bruchmechanische Untersuchungen an Laserschweissungen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
CD-Labor für Advanced Hard Coatings - 2 Jahres-_Evaluierungsbericht
Mitterer, C. & Tessadri, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
CD-Labor für Advanced Hard Coatings - Endbericht 2005
Mitterer, C. & Tessadri, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
CD-Labor für Advanced Hard Coatings - Zwischenbericht
Mitterer, C. & Tessadri, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Characterisation of Residual Stresses in Compressor Discs for Aeroengines
Cihak, U., Staron, P., Stockinger, M. & Clemens, H., 2006, In: Advanced engineering materials. 8, p. 1088-1092Research output: Contribution to journal › Article › Research › peer-review
- Published
Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling
Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, p. 75-82Research output: Contribution to journal › Article › Research › peer-review
- Published
Characterization of Nanometer-sized Precipitates in Tool Steels
Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 695-706Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Characterization of second-phase particles in metallic high-performance materials
Bischof, M. A., 2006, 135 p.Research output: Thesis › Doctoral Thesis
- Published
Characterization of the Behavior under Impact Loading of a Maraging Steel Strengthened by nano-Precipitates
Lach, E., Redjaimia, A., Leitner, H. & Clemens, H., 2006, Proceeding of the 8th International Conference on Mechanical and Physical Behaviour of Materials under Nynamic Loading. p. 1-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Characterization of the Precipitates in Modern Boron Containing 9-12 % Cr Steels by EFTEM and their Correlation to the Creep Strength
Kauffmann, F., Mayer, K.-H., Straub, S., Zies, G., Scheu, C., Ruoff, H. & Maile, K., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 273-280Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel
Peißl, S. K., Leitner, H., Ebner, R., Hutter, H., Krecar, D. & Rabitsch, R., 2006, In: Journal of ASTM international. 3, p. 1-10Research output: Contribution to journal › Article › Research › peer-review
- Published
Charakterisierung der auftretenden Phasen an C/C-Cu Verbindungen - Endbericht
Scheu, C., Eidenberger, E., Leitner, H. & Clemens, H., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung des Ausscheidungsverhaltens von hoch stickstofflegierten austenitischen Stählen
Zuber, M. J., 2006Research output: Thesis › Diploma Thesis
- Published
Charakterisierung einer b–erstarrenden g-TiAl-Legierung
Chladil, H., Clemens, H., Güther, V. & Kremmer, S., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 51-58Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Charakterisierung einer Beta-erstarrenden γ-TiAl Basislegierung
Chladil, H. & Clemens, H., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung einer hoch niobhaltigen intermetallischen Titanaluminid-Legierung
Schnitzer, R., 2006, 93 p.Research output: Thesis › Diploma Thesis
- Published
Charakterisierung einer β-erstarrenden γ-TiAl-Basislegierung
Chladil, H., Clemens, H., Otto, A., Güther, V., Kremmer, S., Bartels, A. & Gerling, R., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 356-361Research output: Contribution to journal › Article › Research › peer-review
- Published
Charakterisierung und fraktographische Beurteilung von Zahlhaltern
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung und Simulation der Ausscheidungsvorgänge in neuartigen Werkzeugstählen
Leitner, H., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung von Abriebsrückständen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung von Aluminium-Ronden
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung von Auftragsschweissungen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung von galvanischen und feuerverzinkten Drähten
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung von hochniobhältigen Gamma-Titanaluminid Basis-Legierungen
Chladil, H. & Clemens, H., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung von Lagerrollen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung von Laserpunktschweissungen an Solaranlagen
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Charakterisierung von Rückständen in einer Wasserturbine
Panzenböck, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
