Chair of Physical Metallurgy (420)

Organisational unit: Chair

101 - 200 out of 2,174Page size: 100

Research output

  1. 2023
  2. Published

    Impact of d‑states on transition metal impurity diffusion in TiN

    Nayak, G. K., Holec, D. & Zelený, M., 22 May 2023, In: Scientific reports (London : Nature Publishing Group). 2023, 13, 11 p., 8244.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Models of configurationally-complex alloys made simple

    Gehringer, D., Friák, M. & Holec, D., May 2023, In: Computer physics communications. 286.2023, May, 11 p., 108664.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    On correlations between local chemistry, distortions and kinetics in high entropy nitrides: An ab initio study

    Nayak, G. K., Kretschmer, A., Mayrhofer, P. H. & Holec, D., 19 Apr 2023, (E-pub ahead of print) In: Acta materialia. 255.2023, 15 August, 9 p., 118951.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steels

    Zeisl, S., Van Steenberge, N. & Schnitzer, R., 19 Apr 2023, In: Journal of materials science. 58.2023, April, p. 7149–7160 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Glide and mixed climb dislocation velocity in γ-TiAl investigated by in-situ transmission electron microscopy

    Galy, B., Musi, M., Hantcherli, M., Molénat, G., Couret, A., Spörk-Erdely, P., Clemens, H. & Monchoux, J.-P., 15 Apr 2023, In: Scripta materialia. 228.2023, 15 April, 8 p., 115333.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Interstitial segregation has the potential to mitigate liquid metal embrittlement in iron

    Ahmadian, A., Scheiber, D., Zhou, X., Gault, B., Romaner, L., Kamachali, R. D., Ecker, W., Dehm, G. & Liebscher, C., 8 Apr 2023, (E-pub ahead of print) In: Advanced materials. 35.2023, 28, 11 p., 2211796.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Phase stability of TiAl-based BCC high entropy alloys

    Hatzenbichler, L., Zeisl, S., Clemens, H. & Holec, D., 7 Apr 2023, In: Intermetallics. 158.2023, July, 9 p., 107893.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Phosphorus and transition metal co-segregation in ferritic iron grain boundaries and its effects on cohesion

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 20 Mar 2023, (E-pub ahead of print) In: Acta materialia. 250.2023, 15 May, 17 p., 118850.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    A TEM study of a dislocations in the ßo phase of an intermetallic TNM-TiAl alloy

    Molénat, G., Monchoux, J.-P., Musi, M., Spörk-Erdely, P., Clemens, H. & Couret, A., 15 Mar 2023, In: Scripta materialia. 226.2023, 15 March, 6 p., 115247.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Influence of focus offset on the microstructure of an intermetallic γ-TiAl based alloy produced by electron beam powder bed fusion

    Ghibaudo, C., Wartbichler, R., Marchese, G., Clemens, H., Ugues, D. & Biamino, S., 3 Mar 2023, In: Journal of manufacturing processes. 89.2023, 3 March, p. 132-141 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Mar 2023, In: International journal of refractory metals & hard materials. 113.2023, June, 4 p., 106173.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys

    Renk, O., Hohenwarter, A., Maier-Kiener, V. & Pippan, R., 15 Feb 2023, In: Journal of alloys and compounds. 935.2023, Part 1, 15 February, 11 p., 168005.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Probing the composition dependence of residual stress distribution in tungsten-titanium nanocrystalline thin films

    Sinojiya, R. J., Paulachan, P., Falah Chamasemani, F., Bodlos, R., Hammer, R., Zalesak, J., Reisinger, M., Scheiber, D., Keckes, J., Romaner, L. & Brunner, R., 15 Feb 2023, In: Communications materials. 2023, 4, 12 p., 11.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Inverse parameter determination for metal foils in multifunctional composites

    Trost, C. O. W., Krobath, M., Žák, S., Hammer, R., Krivec, T., Gänser, H.-P., Trost, T. W., Hohenwarter, A. & Cordill, M. J., 9 Feb 2023, (E-pub ahead of print) In: Materials and Design. 227.2023, March, 13 p., 111711.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Spontaneous formation of carbon dots helps to distinguish molecular fluorophores species

    Gómez, I. J., Vazquez Sulleiro, M., Pizúrová, N., Bednařík, A., Lepcio, P., Holec, D., Preisler, J. & Zajickkova, L., 1 Feb 2023, In: Applied surface science. 610.2023, 1 February, 9 p., 155536.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au system

    Scheiber, D., Svoboda, J., Fischer, F.-D., Böhm, H. J. & Romaner, L., 1 Jan 2023, In: Acta materialia. 244.2023, 1 January, 11 p., 118577.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Temperature dependence of solute segregation energies at W GBs from first principles

    Scheiber, D., Popov, M. N. & Romaner, L., 1 Jan 2023, In: Scripta materialia. 222.2023, 1 January, 5 p., 115059.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Evolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formats

    Jakob, S., Lorich, A., Knabl, W., Stark, A., Staron, P., Clemens, H. & Spörk-Erdely, P., Jan 2023, In: International journal of refractory metals & hard materials. 110.2023, January, 7 p., 106032.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Ab initio discovery of novel hydride phases in NiTi shape memory alloys

    Paulik, A., 2023

    Research output: Thesis › Master's Thesis

  23. Published

    A comprehensive study on the metallographic preparation of W-Re samples for high resolution electron-based microscopy

    Sommerauer, M., Clemens, H., Maier-Kiener, V. & Siller, M., 2023, Pract. Metallograp.. Vol. 60. p. 171-186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    A Multi-method Atomistic Study of Protective Nitride Coatings: from Crystalline to Amorphous Materials

    Nayak, G. K., 2023

    Research output: Thesis › Doctoral Thesis

  25. Published

    Anneal hardening in single phase nanostructured metals

    Renk, O. & Pippan, R., 2023, In: Materials transactions. 64.2023, 7, p. 1464-1473 10 p.

    Research output: Contribution to journal › Review article › peer-review

  26. Published

    Atomistic approaches for investigating planar defects in compositionally complex alloys

    Gehringer, D., 2023

    Research output: Thesis › Doctoral Thesis

  27. Published

    Automatic detection of defects in KOH etch images of SiC single crystals using instance segmentation

    Holub, G., Hofer, S., Obermüller, T. & Romaner, L., 2023.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Ballistic tests on hot-rolled Ti-6Al-4V plates: Experiments and numerical approaches

    Janda, A., Ralph, B., Demarty, Y., Sorger, M., Ebenbauer, S., Prestl, A., Siller, I., Stockinger, M. & Clemens, H., 2023, In: Defence Technology. 26.2023, August, p. 39-53 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    CCT diagrams of high-strength weld metal

    Marin Morales, D., 2023

    Research output: Thesis › Master's Thesis

  30. Published

    Characterization of high alloyed steel composites under ballistic impact

    Job, V., 2023

    Research output: Thesis › Master's Thesis

  31. Published

    Computational analysis of chemical vapor deposition for nitride-based hard coatings

    Wurmitzer, M., 2023

    Research output: Thesis › Master's Thesis

  32. Published

    Deriving a Model for Catalytic Methane Pyrolysis: A DFT Study

    Pototschnig, U., 2023

    Research output: Thesis › Master's Thesis

  33. Published

    DFT modelling of crystallographic defects in SiC polytypes

    Rajabzadeh, Z., Halkali, C., Hammer, R. & Romaner, L., 2023.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Efficient descriptors and active learning for grain boundary segregation

    Dösinger, C. A., Hodapp, M., Peil, O., Reichmann, A., Razumovskiy, V. I., Scheiber, D. & Romaner, L., 2023, In: Physical review materials . 7.2023, 11, 11 p., 113606.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Evaluation of Microstructure and Mechanical Properties of a Precipitation Strengthened Compositionally Complex Alloy

    Biermair, F., 2023

    Research output: Thesis › Doctoral Thesis

  36. Published

    Exploration of phase transformations in lightweight structural materials by means of in situ high-energy X-ray methods

    Graf, G., 2023

    Research output: Thesis › Doctoral Thesis

  37. Published

    Hochfeste metallpulver- und schweißpulvergefüllte Fülldrähte mit einer Streckgrenze über 690 Mpa - Ein Überblick

    Pahr, H. & Schrittwieser, D., 2023, In: Schweiß- & Prüftechnik. 2023, ???

    Research output: Contribution to journal › Article › Research

  38. Published

    Hyperbaric Welding and Wire Arc Additive Manufacturing for Downhole Applications in the Oil and Gas Industry

    Escobar, S. M. L., Walzl, A., Ravi, K., Prohaska, M., Stockinger, M., Richardson, I. M., Fateh, N. & Hönig, S., 2023, Society of Petroleum Engineers - SPE/IATMI Asia Pacific Oil and Gas Conference and Exhibition, APOG 2023. Society of Petroleum Engineers , (Society of Petroleum Engineers - SPE/IATMI Asia Pacific Oil and Gas Conference and Exhibition, APOG 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Influence of Temperature and Microstructure on the Magnetic Properties of Induction Heat Treated Steels

    Jaszfi, V., 2023

    Research output: Thesis › Doctoral Thesis

  40. Published

    Influence of vacancies on the N K-edge ELNES response of fcc Tantalum nitrides: Ab initio study

    Vukusic, A., 2023

    Research output: Thesis › Master's Thesis

  41. Published

    In-Situ HT-EBSD Measurements and Calibration of Multi-class Model for Grain Growth and δ-phase Dissolution Kinetics of Alloy 718

    Raninger, P., Gruber, C., Costin, W., Stanojevic, A., Kozeschnik, E. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 93-106 14 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Interatomic potentials with ab-initio accuracy for defect and growth simulations in SiC

    Halkali, C., Rajabzadeh, Z. & Romaner, L., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Intercritical annealing of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Stadler, M., Stockinger, M. & Schnitzer, R., 2023, 28th IFHTSE 2023 Congress. (28th IFHTSE 2023 Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Interkritisches Glühen eines PH 13-8 Mo Maraging-Stahles

    Teusl, S., 2023

    Research output: Thesis › Master's Thesis

  45. Published

    Interplay between carbon structures and their surface functionalization for improved hydrogen storage

    Leiner, T., 2023.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Local Assessment of Mechanical Properties in Forged Alloy 718 Components Based on the Simulation of the Microstructure Evolution During Production

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Gänser, H. P., Marsoner, S. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 49-63 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Mikrostrukturelle Charakterisierung und Untersuchung des Hochtemperatur-Umformverhaltens einer mit Bor modifizierten (α+β)-Titanlegierung

    Taucher, L., 2023

    Research output: Thesis › Master's Thesis

  48. Published

    Modification of the Cu/W interface cohesion by segregation

    Bodlos, R., Scheiber, D., Spitaler, J. & Romaner, L., 2023, In: Metals : open access journal . 13.2023, 2, 16 p., 346.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Physics-informed neural network for predicting Gibbs free energy

    Vincely, C., Sakic, A., Dave, V., Povoden-Karadeniz, E., Rückert, E. & Holec, D., 2023.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Polycrystal diffraction elastic constants of advanced γ-TiAl based materials

    Obersteiner, D. & Spörk-Erdely, P., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Precipitate evolution in an iron-based superalloy

    Jelinek, A., Renk, O., Juarez Perez, L., Platl, J. & Schnitzer, R., 2023.

    Research output: Contribution to conference › Poster › Research

  52. Published

    Precipitation evolution of γ´ hardened fcc Fe-Ni based alloys

    Juarez Perez, L., 2023

    Research output: Thesis › Master's Thesis

  53. Published

    Prediction of fracture toughness and DBTT of a 15-5 PH steel

    Widowitsch, N., 2023

    Research output: Thesis › Master's Thesis

  54. Published

    Process-structure-property relationships of β-NiAl and η-Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., 2023

    Research output: Thesis › Doctoral Thesis

  55. Published

    Realistic structural properties of amorphous SiNx from machine-learning-assisted molecular dynamics

    Nayak, G. K., Prashanth, S., Todt, J., Daniel, R. & Holec, D., 2023.

    Research output: Contribution to conference › Poster › Research

  56. Published

    Simulation of the mechanical response of the individual intermetallic phases in multi-phase γ titanium aluminides

    Seligmann, B., Spörk-Erdely, P. & Antretter, T., 2023.

    Research output: Contribution to conference › Poster › Research

  57. Published

    Structure and migration mechanisms of small vacancy clusters in Cu: A combined EAM and DFT study

    Fotopoulos, V., Mora-Fonz, D., Kleinbichler, M., Bodlos, R., Kozeschnik, E., Romaner, L. & Shluger, A. L., 2023, In: Nanomaterials. 13.2023, 9, 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Tailoring α2/γ and γ/γ interfaces in TiAl alloys via segregation: A multi-method study

    Gehringer, D., Holec, D., Huber, L. & Neugebauer, J., 2023.

    Research output: Contribution to conference › Poster › Research

  59. Published

    Temperature effect during mechanical alloying on the yttria evolution in the processing of an ODS FeCrMnNiCo alloy

    Mayer, M., 2023

    Research output: Thesis › Doctoral Thesis

  60. Published

    The effects of grain size on the elastic response of FeCrMnNiCo high entropy alloy: a molecular dynamics study

    Zetterberg, K., 2023

    Research output: Thesis › Master's Thesis

  61. Published

    Variation der Lösungsglühtemperatur und Festigkeitsmodellierung von Fe-12Ni Maraging-Stählen

    Karner, M., 2023

    Research output: Thesis › Master's Thesis

  62. 2022
  63. Published

    Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloys

    LI, J., Zhou, X., Breen, A., Peng, Z., Su, J., Kürnsteiner, P., Correa, M. J. D., Chwałek, M. L., Wang, H., Holec, D., Mayer, J. & Dehm, G., 20 Dec 2022, In: Journal of alloys and compounds. 928.2022, 20 December, p. 1-12 12 p., 167177.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Long-Range Magnetic Order in Nickel Hydroxide-Functionalized Graphene Quantum Dots

    Michal, L., Roy, R., Holec, D., Perez, J. G., Pizurová, N., Necas, D., Doleckova, A., Medalova, J., Lepcio, P. & Zajickkova, L., 7 Dec 2022, In: Journal of physical chemistry letters. 13.2022, 49, p. 11536-11542 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Laser powder bed fusion of intermetallic titanium aluminide alloys using a novel process chamber heating system: A study on feasibility and microstructural optimization for creep performance

    Wartbichler, R., Maiwald-Immer, T., Pürstl, F. & Clemens, H., 5 Dec 2022, In: Metals : open access journal . 12.2022, 12, 23 p., 2087.

    Research output: Contribution to journal › Article › Research › peer-review

  66. E-pub ahead of print

    On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder

    Musi, M., Clemens, H., Stark, A. & Spörk-Erdely, P., 26 Nov 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 6, 6 p., 2201242.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges Recycling

    Dworak, S., Fellner, J., Beermann, M., Häuselmann, M., Schenk, J., Michelic, S. K., Cejka, J., Sakic, A., Mayer, J. & Steininger, K., 25 Nov 2022, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 75.2023, Februar, p. 97-107 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Critical Aspects Concerning Large-scale Production of a Batch-annealed Medium-Mn 780 MPa Grade for Automotive Applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 18 Nov 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 11, p. 513-516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Publisher Correction: In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Journal of Materials Research, (2021), 36, 12, (2465-2478), 10.1557/s43578-020-00088-z)

    Burtscher, M., Alfreider, M., Schmuck, K. S., Clemens, H., Mayer, S. & Kiener, D., 14 Nov 2022, In: Journal of Materials Research. 37.2021, p. 3855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  71. Published

    The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., Landefeld, A., Van Steenberge, N., Chang, Y. & Schnitzer, R., 9 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 861.2022, 19 December, 9 p., 144313.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Microstructure, Plasticity and Ductility of a TNM+ Alloy Densified by Spark Plasma Sintering

    Musi, M., Deshayes, C., Molénat, G., Toualbi, L., Galy, B., Spörk-Erdely, P., Hantcherli, M., Monchoux, J.-P., Thomas, M., Clemens, H. & Couret, A., 8 Nov 2022, In: Metals : open access journal . 12.2022, 11, 22 p., 1915.

    Research output: Contribution to journal › Article › Research › peer-review

  73. E-pub ahead of print

    Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel

    Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Accurate ab initio modeling of solid solution strengthening in high entropy alloys

    Moitzi, F., Romaner, L., Ruban, A. V. & Peil, O., 24 Oct 2022, In: Physical review materials . 6.2022, 10, 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. E-pub ahead of print

    The effect of zirconium on the Ti-(42-46 at.%)Al system

    Musi, M., Kardos, S., Hatzenbichler, L., Holec, D., Stark, A., Allen, M., Güther, V., Clemens, H. & Spörk-Erdely, P., 2 Oct 2022, (E-pub ahead of print) In: Acta materialia. 241.2022, December, 13 p., 118414.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Ab initio study of alloying Impact on the stability of cementite in transformation-Induced plasticity-assisted advanced steels

    Sakic, A., Hofer, C., Schnitzer, R. & Holec, D., 18 Sept 2022, In: Advanced engineering materials. 24.2022, 11, 10 p., 2200532.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films

    Meindlhumer, M., Ziegelwanger, T., Zalesak, J., Hans, M., Löfler, L., Spor, S., Jäger, N., Stark, A., Hruby, H., Daniel, R., Holec, D., Schneider, J. M., Mitterer, C. & Keckes, J., 15 Sept 2022, In: Acta materialia. 237.2022, 15 September, 18 p., 118156.

    Research output: Contribution to journal › Article › Research › peer-review

  79. E-pub ahead of print

    Plasticity and brittleness of the ordered βo phase in a TNM-TiAl alloy

    Molénat, G., Galy, B., Musi, M., Toualbi, L., Thomas, M., Clemens, H., Monchoux, J.-P. & Couret, A., 6 Sept 2022, (E-pub ahead of print) In: Intermetallics. 151.2022, December, 11 p., 107653.

    Research output: Contribution to journal › Article › Research › peer-review

  80. E-pub ahead of print

    On the energetics of the cubic-to-hexagonal transformations in TiAl+Mo alloys

    Abdoshahi, N., Dehghani, M., Ruban, A. V., Friák, M., Šob, M., Spitaler, J. & Holec, D., 24 Aug 2022, (E-pub ahead of print) In: Acta materialia. 240.2022, November, p. 118268 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Experimental Investigation of Phase Equilibria in the Ti—Al—Zr System at 1000–1300 °C

    Kahrobaee, Z., Rashkova, B., Hauschildt, K. & Palm, M., 23 Aug 2022, In: Crystals. 12.2022, 9, 17 p., 1184.

    Research output: Contribution to journal › Article › Research › peer-review

  82. E-pub ahead of print

    In-situ high-temperature EBSD characterization during a solution heat treatment of hot-rolled Ti-6Al-4V

    Janda, A., Ebenbauer, S., Prestl, A., Siller, I., Clemens, H. & Spörk-Erdely, P., 8 Aug 2022, (E-pub ahead of print) In: Materials characterization. 192.2022, October, 12 p., 112207.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel

    Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.-A., Keckes, J. & Eckert, J., 2 Aug 2022, In: Advanced engineering materials. 2022, 25 p., 2200524.

    Research output: Contribution to journal › Article › Research › peer-review

  84. E-pub ahead of print

    Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniques

    Jászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E. & Ebner, R., 16 Jul 2022, (E-pub ahead of print) In: Materials & design. 221.2022, September, 9 p., 110936.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metal

    Fleißner-Rieger, H., Musi, M., Albu, M., Krein, R. & Schnitzer, R., 5 Jul 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 850.2022, 11 August, 11 p., 143550.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Phase equilibria in the Ti-rich part of the Ti-Al-Nb system: Part I: Low-Temperature Phase Equilibria Between 700 and 900 °C

    Distl, B., Hauschildt, K., Rashkova, B., Pyczak, F. & Stein, F., 1 Jul 2022, In: Journal of phase equilibria and diffusion. 43.2022, June, p. 355-381 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    How Si affects the microstructural evolution and phase transformations of intermetallic 𝛾-TiAl based alloys

    Musi, M., Galy, B., Stark, A., Schell, N., Hantcherli, M., Monchoux, J.-P., Couret, A., Clemens, H. & Spörk-Erdely, P., 12 Jun 2022, In: Materialia. 24.2022, August, 11 p., 101475.

    Research output: Contribution to journal › Article › Research › peer-review

  88. E-pub ahead of print

    Revealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA III

    Krohmer, E., Schmeiser, F., Wahlmann, B., Rosigkeit, J., Graf, G., Spörk-Erdely, P., Clemens, H., Staron, P., Körner, C., Reimers, W. & Uhlmann, E., 10 Jun 2022, (E-pub ahead of print) In: Review of scientific instruments. 93.2022, 6, 14 p., 065104.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    W 4f electron binding energies in amorphous W-B-C systems

    Ženíšek, J., Ondračka, P., Čechal, J., Souček, P., Holec, D. & Vašina, P., 1 Jun 2022, In: Applied surface science. 586.2022, 1 June, 9 p., 152824.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    30 years of Oliver–Pharr: Then, now and the future of nanoindentation

    Maier-Kiener, V., Lawrence, S. K. & Merle, B., Jun 2022, In: JOM. 74.2022, 6, p. 2177-2178 2 p.

    Research output: Contribution to journal › Editorial › peer-review

  91. Published

    Microstructure Evolution of a New Precipitation-Strengthened Fe–Al–Ni–Ti Alloy down to Atomic Scale

    Godor, F. R., Palm, M., Liebscher, C., Stein, F., Turk, C., Leitner, K., Rashkova, B. & Clemens, H., 26 May 2022, In: Metals : open access journal . 12.2022, 6, 16 p., 906.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Probing the charge transfer and electron–hole asymmetry in graphene–graphene quantum dot heterostructure

    Roy, R., Holec, D., Kratzer, M., Münzer, P., Kaushik, P., Michal, L., Kumar, G. S., Zajíčková, L. & Teichert, C., 20 May 2022, In: Nanotechnology. 33.2022, 32, 9 p., 325704.

    Research output: Contribution to journal › Article › Research › peer-review

  93. E-pub ahead of print

    Influence of matrix composition and MC carbide content on damage behaviour of TiN-coated high speed steel due to cyclic shear and compression load

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Leitner, H., Boumpakis, A., Skordaris, G., Maier-Kiener, V. & Ressel, G., 16 May 2022, (E-pub ahead of print) In: Surface & coatings technology. 442.2022, 25 July, 8 p., 128546.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    The influence of chemistry on the interface toughness in a WTi-Cu system

    Alfreider, M., Bodlos, R., Romaner, L. & Kiener, D., 15 May 2022, In: Acta Materialia. 230.2022, 15 May, 13 p., 117813.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Ca solubility in a BiFeO3‑based system with a secondary Bi2O3 phase on a nanoscale

    Haselmann, U., Radlinger, T., Pei, W., Popov, M. N., Spitaler, T., Romaner, L., Ivanov, Y. P., Chen, J., He, Y., Kothleitner, G. & Zhang, Z., 21 Apr 2022, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 126.2022, 17, p. 7696-7703 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. E-pub ahead of print

    Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry

    Wurmshuber, M., Jakob, S., Doppermann, S., Wurster, S., Bodlos, R., Romaner, L., Maier-Kiener, V. & Kiener, D., 19 Apr 2022, (E-pub ahead of print) In: Acta materialia. 232.2022, 15 June, 13 p., 117939.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    The Phase Transformation of Silicon Assessed by an Unloading Contact Pressure Approach

    Schaffar, G. J. K., Kappacher, J., Tscharnuter, D. & Maier-Kiener, V., 18 Apr 2022, In: JOM. 74.2022, 6, p. 2220-2230 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Graphene on silicon: Effects of the silicon surface orientation on the work function and carrier density of graphene

    Sun, Y., Holec, D., Gehringer, D., Li, L., Fenwick, O., Dunstan, D. J. & Humphreys, C. J., 13 Apr 2022, In: Physical review : B, Condensed matter and materials physics. 105.2022, 16, 8 p., 165416.

    Research output: Contribution to journal › Article › Research › peer-review

  99. E-pub ahead of print

    Heavy-element-alloying for toughness enhancement of hard nitrides on the example Ti-W-N

    Buchinger, J., Koutná, N., Kirnbauer, A., Holec, D. & Mayrhofer, P. H., 2 Apr 2022, (E-pub ahead of print) In: Acta materialia. 231.2022, 1 June, 12 p., 117897.

    Research output: Contribution to journal › Article › Research › peer-review

  100. E-pub ahead of print

    The segregation of transition metals to iron grain boundaries and their effects on cohesion

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 2 Apr 2022, (E-pub ahead of print) In: Acta materialia. 231.2022, 1 June, 18 p., 117902.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Erratum to “Energetic balance and kinetics for the decomposition of supersaturated Ti1-xAlxN” [Acta Materialia 55 (2007) 1441–1446]

    Mayrhofer, P. H., Fischer, F.-D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 1 Apr 2022, In: Acta Materialia. 227.2022, 1 April, 1 p., 117741.

    Research output: Contribution to journal › Letter › peer-review

  102. Published

    Quench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: An in situ SAXS and HEXRD study

    Graf, G., Spörk-Erdely, P., Staron, P., Stark, A., Mendez Martin, F., Clemens, H. & Klein, T., 1 Apr 2022, In: Acta materialia. 227.2022, 1 April, 12 p., 117727.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben