Chair of Mechanics (400)

Organisational unit: Chair

1 - 50 out of 809Page size: 50

Research output

  1. 2025
  2. Published

    Damping of vibrations of a rod by dissipation due to diffusion

    Svoboda, J., Hackl, K. & Fischer, F.-D., 1 Mar 2025, In: Scripta Materialia. 257.2025, 1 March, 5 p., 116461.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Characterization of High-Speed Steels—Experimental Data and Their Evaluation Supported by Machine Learning Algorithms

    Wießner, M. & Gamsjäger, E., 12 Feb 2025, In: Metals : open access journal . 15.2025, 2, 28 p., 194.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing

    Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    On the Road Towards Understanding Squats - Metallographic Investigations of Rails

    Gschwandl, T., Spalek, A., Antretter, T. & Daves, W., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 314-323 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. 2024
  8. Published

    Revisiting the Extension of SGTE Heat Capacity Data to Zero Kelvin: Combining Classical Fit Polynomials with Debye–Einstein Functions

    Gamsjäger, E. & Wießner, M., 4 Nov 2024, In: Journal of phase equilibria and diffusion. 45.2024, 6, p. 1194-1205 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A variational framework for Cahn–Hilliard-type diffusion coupled with Allen–Cahn-type multi-phase transformations in elastic and dissipative solids

    Gaddikere Nagaraja, S. & Antretter, T., 24 Sept 2024, In: International journal of plasticity. 182.2024, November, 20 p., 104131.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Dissolution of Oxide Particles in Multi-component Slags Governed by Diffusive and Convective Fluxes

    Ogris, D. M., Michelic, S. K. & Gamsjäger, E., 8 Jul 2024, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, 5, p. 3451-3463 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Materials science-based guidelines to develop robust hard thin film materials

    Mayrhofer, P. H., Clemens, H. & Fischer, F.-D., 3 Jun 2024, In: Progress in materials science. 146.2024, December, 57 p., 101323.

    Research output: Contribution to journal › Review article › peer-review

  12. Published

    Extended Regression Analysis for Debye–Einstein Models Describing Low Temperature Heat Capacity Data of Solids

    Gamsjäger, E. & Wiessner, M., 26 May 2024, In: Entropy. 26.2024, 6, 16 p., 452.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Modeling solute drag during austenite–ferrite transformation with ab initio binding energies

    Bloder, B. F., Scheiber, D., Raninger, P., Ecker, W. & Antretter, T., 17 May 2024, In: Materialia. 36.2024, August, 9 p., 102128.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Investigation of probable squat growth from initial surface cracks in rails using a three-dimensional rollover simulation

    Gschwandl, T. J., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., 29 Apr 2024, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 238.2024, 4, p. 406-413 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Multi-physical simulation of an inductive heat treatment process on 50CrMo4 steel rods and validation by HEXRD cross-sectional measurements

    Mevec, D. G., Raninger, P., Jászfi, V., Prevedel, P. & Antretter, T., 15 Apr 2024, In: Materialia. 34.2024, May, 102094.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    On the coupling of Hamilton's principle and thermodynamic extremal principles

    Hackl, K., Svoboda, J. & Fischer, F.-D., 30 Mar 2024, In: Journal of the mechanics and physics of solids. 187.2024, June, 8 p., 105633.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A note concerning some aspects for application of a thermodynamic extremal principle (TEP) for continua

    Fischer, F.-D., Zickler, G., Hackl, K. & Svoboda, J., 9 Mar 2024, In: Acta mechanica. 235.2024, 5, p. 3309-3312 4 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  18. Published

    Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization

    Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds

    Prabitz, K. M., Antretter, T., Rethmeier, M., El-Sari, B., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 30 Jan 2024, (E-pub ahead of print) In: Welding in the world. 68.2024, 10, p. 2713-2722 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    A Chemo-Mechanically Coupled Model for the Prediction of Phase Segregation and Pore Formation in Microelectronic Solders

    Antretter, T., 7 Jan 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    A comprehensive methodology for criticality assessment of microvias in printed circuit board assemblies

    Kamble, V. G., Patel, D. R., Schipfer, C., Thalhamer, A., Zuendel, J., Krivec, T., Antretter, T. & Fuchs, P. F., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Creating a Multiphase Production Model Tailored to Deviated Oil-Producing Wells for Integration as Input into a Machine Learning Model for ESP Survival Analysis

    Sindi, W., Fruhwirth, R., Gamsjäger, E. & Hofstätter, H., 2024, Society of Petroleum Engineers - SPE Canadian Energy Technology Conference and Exhibition, CET 2024. Society of Petroleum Engineers , (Society of Petroleum Engineers - SPE Canadian Energy Technology Conference and Exhibition, CET 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Exploring the Impact of Laser Drilling on Material Thermal Decomposition: A Computational Study Using KratosMultiphysics

    Peng, C., Tao, Q., Krivec, T., Casas, G., Latorre, S., Antretter, T., Macher, J. & Fuchs, P., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Finite element analysis of heat transfer in ski presses

    Hösele, L., 2024

    Research output: Thesis › Master's Thesis

  25. Published

    Mean-Field-Model Development for Void Formation in SAC305-Solder Bumps

    Huber, A., 2024

    Research output: Thesis › Master's Thesis

  26. Published

    Parametrization of a numerical model for rolling contact calculations

    Otipka, D., 2024

    Research output: Thesis › Master's Thesis

  27. Published

    Untersuchung des Rissverhaltens von Squats unterhalb der Schienenoberfläche

    Avgustinovic, D., 2024

    Research output: Thesis › Master's Thesis

  28. 2023
  29. Published

    Impact crusher kinematics: The dynamics of an impact swing mechanism as an analytical-mathematical model

    Kemper, D., Fimbinger, E., Antretter, T., Egger, M. & Flachberger, H., 20 Dec 2023, In: Results in Engineering. 21.2024, March, p. 101694 13 p., 101694.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    Numerical treatment of reactive diffusion using the discontinuous Galerkin method

    Flachberger, W., Svoboda, J., Antretter, T., Petersmann, M. & Leitner, S., 13 Oct 2023, (E-pub ahead of print) In: Continuum Mechanics and Thermodynamics. 36.2024, January, p. 61-74 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, (E-pub ahead of print) In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    A note on maxima and minima of dissipation in context of treatment of irreversible thermodynamic systems by application of Extremal Principles

    Svoboda, J., Hackl, K. & Fischer, F.-D., Aug 2023, In: Scripta Materialia. 233.2023, August, 5 p., 115519.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Variational formulation of Cahn–Hilliard-type diffusion coupled with crystal plasticity

    Gaddikere Nagaraja, S., Flachberger, W. & Antretter, T., Aug 2023, In: International journal of plasticity. 167.2023, August, 22 p., 103652.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Experimental and Numerical Visualisation of Subsurface Rail Deformation in a Full-Scale Wheel–Rail Test Rig

    Gschwandl, T. J., Weniger, T. M., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., Jun 2023, In: Metals. 13.2023, 6, 18 p., 1089.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Cyclic Solid-Liquid Phase Transformations in the CaO – SiO 2 System—Experiments and Modelling

    Ogris, D., Kircher, V. & Gamsjäger, E., 19 Apr 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, June, p. 1555-1564 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Residual Stress Evolution in Low-Alloyed Steel at Three Different Length Scales

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 23 Mar 2023, In: Materials. 16.2023, 7, 17 p., 2568.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au system

    Scheiber, D., Svoboda, J., Fischer, F.-D., Böhm, H. J. & Romaner, L., 1 Jan 2023, In: Acta materialia. 244.2023, 1 January, 11 p., 118577.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    A method to reduce computation time in finite element simulations of deep rolling

    Bialowas, J., Pletz, M., Gapp, S. & Maierhofer, J., 2023, In: Procedia Structural Integrity. 46, p. 49-55 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  40. Published

    Experimental and numerical investigation of the phenomenon squats in rails

    Gschwandl, T. J., 2023

    Research output: Thesis › Doctoral Thesis

  41. Published

    Finite element investigation of packing rings

    Ruetz, M., 2023

    Research output: Thesis › Master's Thesis

  42. Published

    Implementation of the Heterosegmental PC-SAFT Approach

    Gessl, C., 2023

    Research output: Thesis › Master's Thesis

  43. Published

    Investigation of plastic deformation in wheel-rail contact in differently heat-treated rail materials

    Samardzic, D., 2023

    Research output: Thesis › Master's Thesis

  44. Published

    On the road towards understanding squats: residual stress state of rails

    Gschwandl, T. J., Daves, W., Antretter, T., Bucher, C. & Künstner, D., 2023, In: Procedia Structural Integrity. 46, p. 17-23 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  45. Published

    Oxide particle dissolution in oxide melts during steel production: In-situ experiments and models

    Eru, O., 2023

    Research output: Thesis › Master's Thesis

  46. Published

    Process Models for the Manufacturing of Railway Components

    Bialowas, J., 2023

    Research output: Thesis › Doctoral Thesis

  47. Published

    Production Optimization Using Integrated Modelling and ESP Survival Analysis Based on Historical Data

    Sindi, W., Fruhwirth, R., Gamsjäger, E. & Hofstätter, H., 2023, Society of Petroleum Engineers - ADIPEC, ADIP 2023. Society of Petroleum Engineers , (Society of Petroleum Engineers - ADIPEC, ADIP 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Prozessoptimierung mittels multiphysikalischer Modellierung des Widerstandspunktschweißens

    Prabitz, K., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R., Polcik, P. & Ecker, W., 2023, XLI. Verformungskundliches Kolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Simulation of the mechanical response of the individual intermetallic phases in multi-phase γ titanium aluminides

    Seligmann, B., Spörk-Erdely, P. & Antretter, T., 2023.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Solid/liquid phase transformations in multi-component slags

    Ogris, D. M. & Gamsjäger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Thermodynamic and kinetic modelling of solid-liquid phase transformations in multi-component slag systems

    Ogris, D., 2023

    Research output: Thesis › Doctoral Thesis

  52. 2022
  53. Published

    On shape forming by contractile filaments in the surface of growing tissues

    Fratzl, P., Fischer, F.-D., Zickler, G. & Dunlop, J. W. C., 12 Dec 2022, In: PNAS Nexus. 2.2023, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    A Technology-Enhanced ‘Assessment System for Teaching and Assessment using a Computer Algebra Kernel’ (STACK): The Best Contributions of 2022’s STACK Community Meeting at the Montanuniversitaet Leoben, Austria

    Orthaber, M. & Antretter, T., 8 Dec 2022, In: International journal emerging technologies in learning : iJET. 17.2022, 23, p. 4-6 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001