Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1 - 100 out of 1,629Page size: 100

Research output

  1. 2025
  2. Published

    Exploring Nanoparticle and Thin Film Bonding Characteristics onto Carbon Fibers using Atomic Force Microscopy

    Haiden, L., Feuchter, M., Kratzer, M., Brunner, A. J., Pansare, A. V., Barbezat, M. & Pinter, G., 25 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  3. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    A New Approach Using Multi-Layer Films from Food Waste as a Shrink Film

    Plevová, K., Feuchter, M., Wild, N. & Resch-Fauster, K., 17 Feb 2025, In: Processes. 13.2025, 2, 16 p., 560.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Effect of Encapsulant Degradation on Photovoltaic Modules Performances Installed in Different Climates

    Barretta, C., Macher, A., Köntges, M., Ascencio-Vasquez, J., Topic, M. & Oreski, G., 9 Jan 2025, In: IEEE Journal of Photovoltaics. 15.2025, 2, p. 290-296 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Very high cycle fatigue properties of short glass fiber reinforced polyetheretherketone (PEEK)

    Fitzka, M., Stadler, G., Schönbauer, B. M., Pinter, G. & Mayer, H., Jan 2025, In: International Journal of Fatigue. 190.2025, January, 8 p., 108652.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2024
  9. Published

    Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration

    Waly, C., Schulnig, S. & Arbeiter, F., 18 Dec 2024, In: Theoretical and Applied Fracture Mechanics. 136.2025, April, 15 p., 104834.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Deformation and fracture of lithosphere-inspired polymeric multi-layer composites

    Waly, C., Höller, R., Griesser, T. & Arbeiter, F., Dec 2024, In: Results in Engineering. 24.2024, December, 9 p., 103519.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Data-driven evaluation of the Paris’ law parameters in polyethylene pipe grades — Increasing the precision of fracture mechanical lifetime estimation

    Messiha, M., Wiener, J., Arbeiter, F. & Pinter, G., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 18 p., 110540.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Polyethylene pipes for distribution of gaseous hydrogen

    Arbeiter, F., Bredács, M., Fechtig, D. & Bradler, P., 22 Nov 2024, p. 1. 6 p.

    Research output: Contribution to conference › Paper

  13. Published

    Christian Doppler Laboratory for Impact of Recycled Materials on the mechanical lifetime estimation of polymers

    Maurer, C., Zach, D., Travnicek, L. & Arbeiter, F., 21 Nov 2024, p. 1-1.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Numerical simulation of non-pressure polypropylene pipes in underground operating conditions

    Travnicek, L., Arbeiter, F. & Poduška, J., 21 Nov 2024, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Enhanced hydrogen gas barrier properties in highly filled acrylonitrile butadiene rubber with high aspect ratio filler

    Clute, C., Hafner, T., Balasooriya, W., Kaiser, A., Pinter, G. & Schlögl, S., 19 Nov 2024, In: International Journal of Hydrogen Energy. 91.2024, 19 November, p. 404-411 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Investigating the influence of bending stiffness and processing parameters on single-leg bending geometries of additively manufactured composites

    Stiller, T., Kerschbaumer, R. C., Waly, C., Zink, B., Slapnik, J. & Pinter, G., 30 Oct 2024, In: Results in Engineering. 24.2024, December, 10 p., 103276.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Efficient surface defect detection in industrial screen printing with minimized labeling effort

    Krassnig, P. J., Haselmann, M., Kremnitzer, M. & Gruber, D. P., 18 Oct 2024, In: Integrated computer-aided engineering. 32.2025, 1, p. 1-21 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate’s Properties

    Hinterberger, K., Main, P., Waly, C. & Lucyshyn, T., 4 Oct 2024, In: Journal of polymers and the environment. 33.2025, January, p. 112-124 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation

    Bautista-Anguís, D., Reiner, L., Röper, F., Maar, S., Wolfahrt, M., Wolfberger, A. & Schlögl, S., 3 Oct 2024, In: Polymers. 16.2024, 19, 13 p., 2799.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement

    Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Oct 2024, In: Journal of composites science. 8.2024, 10, 21 p., 396.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 02: Crosslink density via multi-stage swelling analysis

    Gehling, T., Kerschbaumer, R. C., Pinter, G., Fasching, M. A., Schwarz, T. & Schieppati, J., 26 Sept 2024, In: Polymer. 312.2024, 24 October, 12 p., 127661.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Three-dimensional mechanical metamaterial with tunable engineering constants in a broad range

    Fleisch, M., Pinter, G., Schlögl, S. & Berer, M., 5 Sept 2024, In: Results in Engineering. 23.2024, September, 4 p., 102860.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Fatigue investigations of elastomers developed for high-pressure hydrogen gas environments

    Schieppati, J., Balasooriya, W., Huber, P. A. H. & Pinter, G., 19 Aug 2024, In: International Journal of Fatigue. 189.2024, December, 10 p., 108563.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene

    Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Kontinuierliches Trennen eines Kunststoffgemisches

    Franz, G. (Inventor), Michael, F. (Inventor) & Nadine, W. (Inventor), 15 Jun 2024, IPC No. B29B 17/ 02 A N, Patent No. AT526713, Priority date 29 Nov 2022, Priority No. AT20220050907

    Research output: Patent

  27. Published

    Multi-Material 3D Printing of Biobased Epoxy Resins

    Bergoglio, M., Rossegger, E., Schlögl, S., Griesser, T., Waly, C., Arbeiter, F. & Sangermano, M., 27 May 2024, In: Polymers. 16.2024, 11, 18 p., 1510.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene

    Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  29. Published

    Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer waste

    Geier, J., Barretta, C., Hinczica, J., Haar, B., Bredács, M., Witschnigg, A., Mayrbäurl, E. & Oreski, G., 15 May 2024, In: Journal of applied polymer science. 141.2024, 30, 14 p., e55694.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

    Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.

    Research output: Contribution to journal › Conference article › peer-review

  31. E-pub ahead of print

    Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

    Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., 7 May 2024, (E-pub ahead of print) In: Polymer Testing. 134.2024, May, 13 p., 108444.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Laser-induced graphene formation on different wood species: Dependence of electronic performance on intrinsic features of certain types of wood

    Lengger, S. K., Neumaier, L., Haiden, L., Feuchter, M., Griesser, T. & Kosel, J., 4 May 2024, (E-pub ahead of print) In: Sustainable Materials and Technologies. 40.2024, July, 11 p., e00936.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Design of Reversible Adhesives by Using a Triple Function of Ionic Liquids

    Wanghofer, F., Kriehuber, M., Reisinger, D., Floh, F., Wolfahrt, M. & Schlögl, S., 2 May 2024, (E-pub ahead of print) In: Macromolecular materials and engineering. 309.2024, 9, 9 p., 2400011.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Reducing part deformation of isotactic polypropylene specimens fabricated with powder bed fusion technique through controlling crystallization behaviors

    Gao, X., Guo, J., Zhang, D., Li, J., Su, Y., Arbeiter, F. & Li, H., 24 Apr 2024, In: Journal of polymer science. 62.2024, 13, p. 3025-3037 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applications

    Clute, C., Balasooriya, W., Cano Murillo, N., Theiler, G., Kaiser, A., Fasching, M., Schwarz, T., Hausberger, A., Pinter, G. & Schlögl, S., 23 Apr 2024, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 67.2024, 20 May, p. 540-552 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    MetamaterialFinder: A software framework for discovering and analyzing mechanical metamaterials based on simple closed curves

    Fleisch, M., Thalhamer, A., Schlögl, S., Fuchs, P. F., Pinter, G. & Berer, M., 2 Apr 2024, (E-pub ahead of print) In: Advances in Engineering Software. 192.2024, June, 18 p., 103626.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigation into the state of cure of elastomers through nanoindentation

    Schieppati, J., Gehling, T., Azevedo, M., Kerschbaumer, R. C., Christöfl, P., Oreski, G., Fasching, M. A., Schwarz, T. & Pinter, G., 1 Apr 2024, In: Polymer Testing. 133.2024, April, 9 p., 108417.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Dual-Wavelength Vat Photopolymerization 3D Printing with Hybrid Acrylate-Epoxy Resins: Influence of Resin Composition on Microstructure and Mechanical Properties

    Cazin, I., Plevová, K., Alabiso, W., Vidović, E. & Schlögl, S., Apr 2024, In: Advanced Engineering Materials. 26.2024, 8, 12 p., 2301699.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis

    Ravindran, B., Agathocleous, T., Oswald-Tranta, B., Fauster, E. & Feuchter, M., 29 Mar 2024, In: Journal of composites science. 8.2024, 4, 20 p., 126.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Shape or size matters? Towards standard reporting of tensile testing parameters for human soft tissues: systematic review and finite element analysis

    Lin, A. C., Pirrung, F., Niestrawska, J. A., Ondruschka, B., Pinter, G., Henyš, P. & Hammer, N., 26 Mar 2024, In: Frontiers in Bioengineering and Biotechnology. 12.2024, 1368383.

    Research output: Contribution to journal › Review article › peer-review

  41. Published

    Prospects in the application of a frontally curable epoxy resin for cured-in-place-pipe rehabilitation

    Malik, M. S., Wolfahrt, M., Domínguez Pardo, J. J., Bublitz, D. & Schlögl, S., 5 Mar 2024, In: Journal of applied polymer science. 141.2024, 9, 13 p., e55024.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effect of different weft-knitted structures on the mechanical performance of bio-based flexible composites

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Feuchter, M. & Resch-Fauster, K., Mar 2024, In: Composites Part C: Open Access. 13.2024, March, 11 p., 100436.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    UV lamp spectral effects on the aging behavior of encapsulants for photovoltaic modules

    Heidrich, R., Barretta, C., Mordvinkin, A., Pinter, G. G., Oreski, G. & Gottschalg, R., Mar 2024, In: Solar energy materials and solar cells. 266.2024, March, 17 p., 112674.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Thermally-activated locomotion of a bilayer polymer actuator

    Fedoryak, A. N., Doroshenko, T. P., Golenkov, O. G., Kratzer, M., Huszar, M., Plevová, K., Haiden, L., Teichert, K. C. & Dimitriev, O. P., 24 Feb 2024, In: Smart Materials in Manufacturing. 2.2024, 12 p., 100047.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Redox cationic frontal polymerization: a rapid curing approach for carbon fiber-reinforced composites with high fiber content

    Malik, M. S., Wolfahrt, M., Pinter, G. & Schlögl, S., 22 Feb 2024, In: Monatshefte fur Chemie. 155.2024, 2, p. 205-217 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Tensile properties of flexible composites with knitted reinforcements from various yarn materials

    Schwaiger, M., Röper, F., Wolfahrt, M., Taesler, J., Schirmer, H., Salzmann, M., Feuchter, M. & Resch-Fauster, K., 20 Feb 2024, In: Polymer Composites. 45.2024, 3, p. 2602-2614 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Rapid tooling for rubber extrusion molding by digital light processing 3D printing with dual curable vitrimers

    Höller, R., Hrbinič, K., Reisinger, D., Alabiso, W., Schuschnigg, S., Fleisch, M., Waly, C., Rossegger, E. & Schlögl, S., 19 Feb 2024, In: Applied research. 3.2024, 4, 10 p., e202300133.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Characterization of fracture behavior under impact-like loading conditions of elastomeric grades for high-pressure gas applications

    Balasooriya, W., Kaiser, A., Fasching, M., Hausberger, A., Schwarz, T. & Pinter, G. G., 16 Feb 2024, In: Polymer. 294.2024, 16 February, 12 p., 126718.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Analysis of different polypropylene waste bales: Evaluation of the source material for PP recycling

    Geier, J., Bredács, M., Witschnigg, A., Vollprecht, D. & Oreski, G., 6 Feb 2024, In: Waste Management and Research. 42.2024, 9, p. 767-775 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    A characterization program for cell spacer materials: unveiling key performance parameters for advanced battery stack assemblies

    Liu, D. T., 2024

    Research output: Thesis › Master's Thesis

  51. Published

    Acoustic Emission based determination of delamination initiation in GFRP laminates

    Brunner, A. J., Koss, V., Gfrerrer, M. & Pinter, G., 2024, Proceedings of the 36th Conference of the European Working Group on Acoustic Emission.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    AE based crack size estimates from delamination propagation in fiber reinforced thermoset composites

    Gfrerrer, M., Koss, V., Pinter, G. & Brunner, A. J., 2024, Proceedings of the 36th Conference of the European Working Group on Acoustic Emission.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Characterization of short fiber reinforced polymers in the very high cycle fatigue regime

    Puregger, F., 2024

    Research output: Thesis › Master's Thesis

  54. Published

    Characterization of the in-situ effect in cross-ply laminates using acoustic emission analysis and optical crack detection

    Paulczinsky, L., 2024

    Research output: Thesis › Master's Thesis

  55. Published

    Characterization of the viscoelastic material properties of FR-4 materials

    Zach, D., 2024

    Research output: Thesis › Master's Thesis

  56. Published

    Effects of Printing Direction and Multi-material on Hardness of Additively Manufactured Thermoplastic Elastomers for Comfortable Orthoses and Prostheses

    Michalec, P., Varsavas, S. D., Arbeiter, F., Weidner, R. & Faller, L.-M., 2024, Additive Manufacturing in Multidisciplinary Cooperation and Production. Drstvensek, I., Pal, S. & Ihan Hren, N. (eds.). Cham: Springer International Publishing, p. 33-41 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    Einfluss des Rezyklat-Anteils und des Spannungsverhältnisses auf das Risswachstumsverhalten eines HDPE Blasform Typs

    Schulhofer, B., 2024

    Research output: Thesis › Master's Thesis

  58. Published

    Einfluss von Farb-Masterbatches auf adhäsive, elektrische sowie flammhemmende Eigenschaften ausgewählter technischer Thermoplaste

    Wehinger, P., 2024

    Research output: Thesis › Master's Thesis

  59. Published

    Estimating Microscopic Defect Size from Mode I, Mode II, and Mixed Mode I/II Interlaminar Delamination Propagation in GFRP and CFRP Laminates under Quasi-static Loads

    Brunner, A. J., Gfrerrer, M., Koss, V. & Pinter, G., 2024, Proceedings of the 24th European Conference on Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Flexible und biobasierte Epoxidharzsysteme: Entwicklung, Optimierung und Anwendung in hybriden Werkstoffen

    Schwaiger, M., 2024

    Research output: Thesis › Doctoral Thesis

  61. Published

    Influence of Different Manufacturing Methods and Conditions on the Fatigue Behavior of Nitrile Butadiene Rubber

    Gehling, T., 2024

    Research output: Thesis › Doctoral Thesis

  62. Published

    Influence of Process Parameters on Interfacial Adhesion, Mechanical and Thermomechanical Properties of Glass Fiber Reinforced Epoxy Resin in Printed Circuit Boards

    Obwaller, R., 2024

    Research output: Thesis › Master's Thesis

  63. Published

    Nanoindentation of polymers

    Christöfl, P., 2024

    Research output: Thesis › Doctoral Thesis

  64. Published

    Spherulite Growth and Crystallization Kinetics of Polypropylene and its blends

    Jacobs, A., 2024

    Research output: Thesis › Master's Thesis

  65. Published

    Umgebungsbedingte Spannungsrissbildung in Polyethylen: Analyse verschiedener Testmethoden

    Ladinig, A., 2024

    Research output: Thesis › Master's Thesis

  66. 2023
  67. Published

    Maßgeschneiderte Sanierungsverfahren für die Tunnelentwässerung - "DrainRepair": Teil 2: Ergebnisbericht

    Arbeiter, F., Schachinger, T., Wenighofer, R., Rieß, G., Steiner, M., Micic Batka, V., Griebaum, M., Laufer, V. & Galler, R., 7 Dec 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 12, p. 566-571 5 p.

    Research output: Contribution to journal › Article › Research

  68. Published

    Determination of creep crack growth kinetics of ABS via the C* approach at different temperatures

    Wainstein, J., Wiener, J., Arbeiter, F. & Frontini, P. M., Dec 2023, In: Results in Engineering. 20.2023, December, 9 p., 101481.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., 18 Oct 2023, In: Polymers. 15.2023, 20, 24 p., 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Tension-after-impact (TAI) performance and 3D damage visualization of carbon-fiber epoxy composites with adhesively bonded patch repairs

    Röper, F., Sommacal, S., Compston, P., Tauchner, J., Wolfahrt, M. & Pinter, G. G., 15 Oct 2023, In: Composite structures. 322.2023, 15 October, 11 p., 117338.

    Research output: Contribution to journal › Article › Research › peer-review

  71. E-pub ahead of print

    Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 01

    Gehling, T., Kerschbaumer, R. C., Pinter, G. G., Fasching, M. A., Schwarz, T. & Schieppati, J., 7 Oct 2023, (E-pub ahead of print) In: Results in Engineering. 20.2023, December, 8 p., 101484.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Redox cationic frontal polymerization: a new strategy towards fast and efficient curing of defect-free fiber reinforced polymer composites

    Malik, M. S., Wolfahrt, M. & Schlögl, S., 4 Oct 2023, In: RSC Advances. 13.2023, 41, p. 28993-29003 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Crack penetration versus deflection in extrusion-based additive manufacturing – Impact of nozzle temperature and morphology

    Waly, C., Petersmann, S. & Arbeiter, F., Oct 2023, In: Theoretical and Applied Fracture Mechanics. 127.2023, October, 13 p., 104032.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions

    de Carvalho, W. S., Marzemin, F., Belei, C., Petersmann, S., Arbeiter, F. & de Traglia Amancio-Filho, S., 15 Sept 2023, In: Polymer Testing. 128.2023, November, 13 p., 108207.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    UV-stabilization of linseed oil-based epoxy resin

    Schwaiger, M., Schedler, M. & Resch-Fauster, K., 4 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  76. Published

    Degradation of PET – Quantitative estimation of changes in molar mass using mechanical and thermal characterization methods

    Oreski, G., Ottersböck, B., Barretta, C., Christöfl, P., Radl, S. & Pinter, G. G., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108130.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Optimization and manufacture of polyetheretherketone patient specific cranial implants by material extrusion: A clinical perspective

    Smith, J. A., Petersmann, S., Arbeiter, F. & Schäfer, U., Aug 2023, In: Journal of the Mechanical Behavior of Biomedical Materials. 144.2023, August, 25 p., 105965.

    Research output: Contribution to journal › Review article › peer-review

  78. E-pub ahead of print

    Concepts towards bio-inspired multilayered polymer-composites

    Wiener, J., Arbeiter, F. & Pinter, G. G., 21 Jul 2023, (E-pub ahead of print) In: Procedia Structural Integrity. 2023, 47, p. 253-260 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. E-pub ahead of print

    Investigation of expandable fillers for reversible adhesive bonding in photovoltaic modules

    Wanghofer, F., Wolfberger, A., Oreski, G., Neumaier, L. & Schlögl, S., 20 Jul 2023, (E-pub ahead of print) In: International Journal of Adhesion and Adhesives. 126.2023, August, 10 p., 103454.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Computational modelling of the separation of molten polymer blends by a centrifugal technique

    Medvid, V., Steiner, H., Irrenfried, C., Feuchter, M. & Brenn, G., 17 Jul 2023, In: Journal of polymer research. 30.2023, 8, 308.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing

    Eder, S., Kuchler, L., Katschnig, M., Brandl, B., Wolfgang, M., Koutsamanis, I., Hentschel, L., Arbeiter, F., Roblegg, E. & Spoerk, M., 13 Jul 2023, In: Advanced Materials Technologies. 8.2023, 17, 15 p., 2300237.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Fatigue Behavior of Elastomeric Components: A Review of the Key Factors of Rubber Formulation, Manufacturing, and Service Conditions

    Gehling, T., Schieppati, J., Balasooriya, W., Kerschbaumer, R. C. & Pinter, G. G., 3 Jul 2023, In: Polymer reviews. 63.2023, 3, p. 763-804 42 p.

    Research output: Contribution to journal › Review article › peer-review

  83. Published

    Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

    Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F. & Resch-Fauster, K., Jul 2023, In: Polymer Testing. 124.2023, July, 10 p., 108098.

    Research output: Contribution to journal › Article › Research › peer-review

  84. E-pub ahead of print

    Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes

    Trávníček, L., Poduška, J., Messiha, M., Arbeiter, F., Pinter, G. G., Náhlík, L. & Hutař, P., 14 Jun 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 289.2023, 1 September, 18 p., 109423.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Identifying active and degraded phenolic antioxidants in aged PE with IR-microscopy

    Bredács, M., Kanatschnig, E. E., Frank, A., Oreski, G., Pinter, G. G. & Gergely, S., Jun 2023, In: Polymer Degradation and Stability. 212.2023, June, 13 p., 110345.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

    Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

    Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected results

    Haiden, L., Brunner, A. J., Pansare, A. V., Feuchter, M. & Pinter, G. G., 20 Mar 2023, In: Science and Engineering of Composite Materials. 30.2023, 1, 12 p., 20220175.

    Research output: Contribution to journal › Article › Research › peer-review

  89. E-pub ahead of print

    Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effect

    Fleisch, M., Thalhamer, A., Meier, G., Huber, P., Fuchs, P., Pinter, G. G., Schlögl, S. & Berer, M., 15 Mar 2023, (E-pub ahead of print) In: Engineering Structures. 284.2023, 1 June, 15 p., 115952.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

    Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Corrigendum to “Personalised urethra pessaries prepared by material extrusion-based additive manufacturing” [Int. J. Pharm. 608 (2021) 121112] (International Journal of Pharmaceutics (2021) 608, (S0378517321009182), (10.1016/j.ijpharm.2021.121112))

    Spörk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Jan 2023, In: International Journal of Pharmaceutics. 631.2023, 25 January, 1 p., 122548.

    Research output: Contribution to journal › Comment/debate › peer-review

  93. Published

    Material extrusion-based additive manufacturing of polyetheretherketone cranial implants: Mechanical performance and print quality

    Petersmann, S., Smith, J. A., Schäfer, U. & Arbeiter, F., Jan 2023, In: Journal of Materials Research and Technology. 22.2023, January-February, p. 642-657 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Batch variations of post-consumer recyclates and their influence on material properties

    Schatz, L. M., 2023

    Research output: Thesis › Master's Thesis

  95. Published

    Bio-based soft composites with knitted reinforcements

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023.

    Research output: Contribution to conference › Poster › Research

  96. Published

    Bio-based soft composites with knitted reinforcements

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023, 31st Leoben Conference on Polymer Engineering & Science. Leoben

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    BIOBASED STRETCH FILMS – THE FUTURE OF PACKAGING?

    Feuchter, M., 2023, Polymer Meeting 15 - Book of Abstacts. p. 93 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Biomimetic concepts for the optimization of mechanical properties in layered polymeric materials

    Wiener, J., 2023

    Research output: Thesis › Doctoral Thesis

  99. Published

    Characterization of material interactions of polymers in PV modules

    Barretta, C., 2023

    Research output: Thesis › Doctoral Thesis

  100. Published

    Comparison of different measuring methods for thermo-mechanical characterization of polymer powders

    Tröscher, T., 2023

    Research output: Thesis › Master's Thesis

  101. Published

    Correlating crack density, stiffness degradation and dissipated energy during fatigue loading of ±45° GFRP laminates

    Gfrerrer, M., Wiener, J., Drvoderic, M., Brunner, A. J. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  102. Published

    Delamination resistance testing of fiber reinforced polymer laminates combined with acoustic emission analysis

    Koss, V., 2023

    Research output: Thesis › Master's Thesis

  103. Published

    Development and characterisation of vitrimer-like elastomers and elastomeric composites from HXNBR rubber

    Grabmayer, T., Kaiser, S., Pilz, G., Kern, W. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 5 6 7 8 ...17 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101