Chair of Materials Physics (430)

Organisational unit: Chair

701 - 800 out of 1,985Page size: 100

Research output

  1. 2017
  2. Published

    Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation

    Li, F., Yi, J. & Eckert, J., 12 Oct 2017, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 12, p. 6027-6037 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Two-stage cracking of metallic bi-layers on polymer substrates under tension

    Putz, B., May-Miller, C., Matl, V., Völker, B., Többens, D., Semprimoschnig, C. & Cordill, M., 9 Oct 2017, (E-pub ahead of print) In: Scripta Materialia. 145.2018, 1 March, p. 5-8 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques

    Vieweg, A., Povoden-Karadeniz, E., Ressel, G., Prevedel, P., Wojcik, T., Mendez Martin, F., Stark, A., Keckes, J. & Kozeschnik, E., 4 Oct 2017, (E-pub ahead of print) In: Materials and Design. 136.2017, 15 December, p. 214-222 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Simultaneous enhancement of strength and fatigue crack growth behavior of nanocrystalline steels by annealing

    Leitner, T., Pillmeier, S., Kormout, K. S., Pippan, R. & Hohenwarter, A., 1 Oct 2017, In: Scripta Materialia. 139.2017, October, p. 39-43 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Atomic origin for rejuvenation of a Zr-based metallic glass at cryogenic temperature

    Bian, X. L., Wang, G., Yi, J., Jia, Y. D., Bednarčík, J., Zhai, Q. J., Kaban, I., Sarac, B., Mühlbacher, M., Spieckermann, F., Keckes, J. & Eckert, J., 25 Sept 2017, In: Journal of alloys and compounds. 718.2017, 25 September, p. 254-259 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Laser Ultrasonic Thin Film Characterization of Si-Cu-Al-Cu Multi-Layered Stacks

    Grünwald, E., Nuster, R., Paltauf, G., Maier, T., Wimmer-Teubenbacher, R., Konetschnik, R., Kiener, D., Leitgeb, V., Köck, A. & Brunner, R., 19 Sept 2017, (E-pub ahead of print) In: Materials Today: Proceedings. 4.2017, 7, Part 2, p. 7122-7127 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers

    Kleinbichler, A., Todt, J., Zechner, J., Wöhlert, S., Többens, D. & Cordill, M., 18 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 332.2017, 25 December, p. 376-381 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Combined TEM and XPS studies of metal - polymer interfaces for space applications

    Putz, B., Milassin, G., Butenko, Y., Völker, B., Gammer, C., Semprimoschnig, C. & Cordill, M., 18 Sept 2017, In: Surface & coatings technology. 332.2017, 25 December, p. 368-375 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Microstructural influence on the cyclic electro-mechanical behaviour of ductile films on polymer substrates

    Cordill, M., Glushko, O., Kleinbichler, A., Putz, B., Többens, D. & Kirchlechner, C., 17 Sept 2017, (E-pub ahead of print) In: Thin solid films. 644.2017, 31. December, p. 166-172 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Structural modifications in sub-Tg annealed CuZr-based metallic glass

    Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 14 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 245-252 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Electro-mechanical behavior of sputter-deposited molybdenum-aluminum multilayers

    Kreiml, P., Rausch, M. (Co-editor), Franz, R. (Co-editor), Winkler, J. (Co-editor), Mitterer, C. (Co-editor) & Cordill, M. J., 11 Sept 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi

    Thurston, K. V. S., Gludovatz, B., Hohenwarter, A., Laplanche, G., George, E. P. & Ritchie, R. O., 1 Sept 2017, In: Intermetallics. 88.2017, September, p. 65-72 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating

    Schwab, H., Bönisch, M., Giebeler, L., Gustmann, T., Eckert, J. & Kühn, U., Sept 2017, In: Materials and Design. 130.2017, 15 September, p. 83-89 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Micropatterning kinetics of different glass-forming systems investigated by thermoplastic net-shaping

    Sarac, B., Bera, S., Spieckermann, F., Balakin, S., Stoica, M., Calin, M. & Eckert, J., 31 Aug 2017, In: Scripta materialia. 137.2017, August, p. 127-131 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Crack path identification in a nanostructured pearlitic steel using atom probe tomography

    Leitner, T., Sackl, S., Völker, B., Riedl, H., Clemens, H., Pippan, R. & Hohenwarter, A., 24 Aug 2017, In: Scripta Materialia. 142.2018, 1 January, p. 66-69 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Femtosecond laser machining for characterization of local mechanical properties of biomaterials: a case study on wood

    Jakob, S., Pfeifenberger, M. J., Hohenwarter, A. & Pippan, R., 22 Aug 2017, (E-pub ahead of print) In: Science and Technology of Advanced Materials. 18.2017, 1, p. 574-583 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Dislocation Movement Induced by Molecular Relaxations in Isotactic Polypropylene

    Spieckermann, F., Polt, G., Wilhelm, H., Kerber, M. B., Schafler, E., Reinecker, M., Soprunyuk, V., Bernstorff, S. & Zehetbauer, M., 21 Aug 2017, (E-pub ahead of print) In: Macromolecules. 50.2017, 17, p. 6362-6368 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    New Insights into Nanoindentation-Based Adhesion Testing

    Kleinbichler, A., Pfeifenberger, M. J., Zechner, J., Moody, N. R., Bahr, D. F. & Cordill, M., 21 Aug 2017, In: JOM. 69.2017, 11, p. 2237-2245 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Deformation behavior of Re alloyed Mo thin films on flexible substrates: In situ fragmentation analysis supported by first-principles calculations

    Jörg, T., Music, D., Hauser, F., Cordill, M., Franz, R., Köstenbauer, H., Winkler, J., Schneider, J. M. & Mitterer, C., 7 Aug 2017, In: Scientific reports (London : Nature Publishing Group). 2017, 7, 10 p., 7374.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Impact of severe plastic deformation on microstructure and fracture toughness evolution of a duplex-steel

    Schwarz, K. T., Kormout, K., Pippan, R. & Hohenwarter, A., 4 Aug 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 703.2017, 4 August, p. 173-179 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Friction welding of selective laser melted Ti6Al4V parts

    Prashanth, K. G., Damodaram, R., Maity, T., Wang, P. & Eckert, J., 3 Aug 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 704.2017, September, p. 66-71 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Hardening of shear band in metallic glass

    Wang, J. G., Hu, Y. C., Guan, P. F., Song, K. K., Wang, L., Wang, G., Pan, Y., Sarac, B. & Eckert, J., 1 Aug 2017, In: Scientific reports (London : Nature Publishing Group). 2017, 7, 10 p., 7076.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Strength and ductility of heavily deformed pearlitic microstructures

    Hohenwarter, A., Kapp, M., Völker, B., Renk, O. & Pippan, R., 1 Aug 2017, In: IOP Conference Series: Materials Science and Engineering. 219.2017, 1, 10 p., 012003.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    Tailoring the Bain strain of martensitic transformations in Ti-Nb alloys by controlling the Nb content

    Bönisch, M., Waitz, T., Calin, M., Skrotzki, W. & Eckert, J., 16 Jul 2017, (E-pub ahead of print) In: International journal of plasticity. 85.2016, October, p. 190-202 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Phase Identification and Size Evaluation of Mechanically Alloyed Cu-Mg-Ni Powders

    Kursun, C., Gogebakan, M., Khoshkhoo, M. S. & Eckert, J., 12 Jul 2017, Nanostructured Materials - Fabrication to Applications: Intech.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Effect of Co additions on the phase formation, thermal stability, and mechanical properties of rapidly solidified Ti-Cu-based alloys

    Gargarella, P., Pauly, S., Kiminami, C. S. & Eckert, J., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, July, p. 2578-2584 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, 14, p. 2658-2667 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Stability of shear banding process in bulk metallic glasses and composites

    Qin, Y., Han, X., Song, K., Wang, L., Cheng, Y., Zhang, Z., Xue, Q., Sun, N., Wang, J., Sun, B., Sarac, B., Spieckermann, F., Wang, G., Kaban, I. & Eckert, J., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, July, p. 2560-2569 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys

    Wang, Z., Georgarakis, K., Zhang, W. W., Prashanth, K. G., Eckert, J. & Scudino, S., Jul 2017, In: Wear. 382, p. 78-84

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines

    Prashanth, K. G., Kolla, S. & Eckert, J., 19 Jun 2017, In: Materials. 10.2017, 6, 12 p., 672.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Dynamic nanoindentation testing: is there an influence on a material’s hardness?

    Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Jun 2017, In: Materials Research Letters [Elektronische Ressource]. 5.2017, 7, p. 486-493 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Film thickness dependent microstructural changes of thick copper metallizations upon thermal fatigue

    Bigl, S., Trost, C. O. W., Wurster, S., Cordill, M. J. & Kiener, D., 1 Jun 2017, In: Journal of materials research (JMR). 32.2017, 11, p. 2022-2034 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass

    Wang, Z., Scudino, S., Prashanth, K. G. & Eckert, J., Jun 2017, In: Journal of alloys and compounds. 707.2017, 15 June, p. 63-67 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Formation of metastable cellular microstructures in selective laser melted alloys

    Prashanth, K. G. & Eckert, J., Jun 2017, In: Journal of alloys and compounds. 707.2017, 15 June, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Probing the dynamics of complexed local anesthetics via neutron scattering spectroscopy and DFT calculations

    Martins, M. L., Eckert, J., Jacobsen, H., dos Santos, É. C., Ignazzi, R., de Araujo, D. R., Bellissent-Funel, M.-C., Natali, F., Koza, M. M., Matic, A., de Paula, E. & Bordallo, H. N., 30 May 2017, In: International Journal of Pharmaceutics. 524.2017, 1-2, p. 397-406 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Compressed Bi-crystal micropillars showing a sigmoidal deformation state – A computational study

    Toth, F., Kirchlechner, C., Fischer, F.-D., Dehm, G. & Rammerstorfer, F. G., 26 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 168-174 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    750 Schüler durften selbst forschen

    Kiener, D., 18 May 2017

    Research output: Non-textual form › Web publication/site › Transfer

  39. E-pub ahead of print

    A versatile atomic force microscope integrated with a scanning electron microscope

    Kreith, J., Strunz, T., Fantner, E. J., Fantner, G. E. & Cordill, M., 17 May 2017, (E-pub ahead of print) In: Review of scientific instruments. 88.2017, 5, 053704.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Electrochemical and biocompatibility examinations of high-pressure torsion processed titanium and Ti-13Nb-13Zr alloy

    Dimić, I., Cvijović-Alagić, I., Hohenwarter, A., Pippan, R., Kojić, V., Bajat, J. & Rakin, M., 15 May 2017, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 106.2018, 3, p. 1097-1107 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Glass-forming ability and microstructural evolution of [(Fe0.6Co0.4)(0.75)Si0.05B0.20](96-x)Nb4Mx metallic glasses studied by Mössbauer spectroscopy

    Torrens-Serra, J., Bruna, P., Stoica, M. & Eckert, J., 15 May 2017, In: Journal of alloys and compounds. 704.2017, 15 May, p. 748-759 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Explicit relationship between electrical and topological degradation of polymer-supported metal films subjected to mechanical loading

    Glushko, O., Kraker, P. & Cordill, M., 11 May 2017, In: Applied physics letters. 110.2017, 19, 191904.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy

    Skrotzki, W., Pukenas, A., Joni, B., Odor, E., Ungar, T., Hohenwarter, A., Pippan, R. & George, E. P., 8 May 2017, In: IOP Conference Series: Materials Science and Engineering. 2017, 194, 012028.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation

    Pfeifenberger, M. J., Mangang, M., Wurster, S., Reiser, J., Hohenwarter, A., Pfleging, W., Kiener, D. & Pippan, R., 5 May 2017, In: Materials and Design. 121.2017, 5 May, p. 109-118 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Monotonic and cyclic mechanical reliability of metallization lines on polymer substrates

    Glushko, O., Klug, A., List-Kratochvil, E. J. W. & Cordill, M., 1 May 2017, In: Journal of Materials Research. 32.2017, 9, p. 1760-1769 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Dichlorosilane-derived nano-silicon inside hollow carbon spheres as a high-performance anode for Li-ion batteries

    Jaumann, T., Gerwig, M., Balach, J., Oswald, S., Brendler, E., Hauser, R., Kieback, B., Eckert, J., Giebeler, L. & Kroke, E., May 2017, In: Journal of Materials Chemistry A. 5.2017, 19, p. 9262-9271 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Structural, elastic and electronic properties of CoZr in B2 and B33 structures under high pressure

    Lu, W. F., Li, C. J., Sarac, B., Şopu, D., Yi, J. H., Tan, J., Stoica, M. & Eckert, J., May 2017, In: Journal of alloys and compounds. 705.2017, 25 May, p. 445-455 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Microstructure and abrasive wear behavior of a novel FeCrMoVC laser cladding alloy for high-performance tool steels

    Zeisig, J., Schädlich, N., Giebeler, L., Sander, J., Eckert, J., Kühn, U. & Hufenbach, J., 26 Apr 2017, (E-pub ahead of print) In: Wear. 382-383.2017, 15 July, p. 107-112 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Mechanochemical synthesis of nanostructured metal nitrides, carbonitrides and carbon nitride: a combined theoretical and experimental study

    Rounaghi, S. A., Vanpoucke, D. E. P., Eshghi, H., Scudino, S., Esmaeili, E., Oswald, S. & Eckert, J., 19 Apr 2017, In: Physical chemistry, chemical physics : PCCP. 2017, 19, p. 12414-12424 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Effect of replacing Nb with (Mo and Zr) on glass forming ability, magnetic and mechanical properties of FeCoBSiNb bulk metallic glass

    Ramasamy, P., Stoica, M., Bera, S., Calin, M. & Eckert, J., 14 Apr 2017, In: Journal of alloys and compounds. 707.2017, 15 June, p. 78-81 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess

    Zalesak, J., Holec, D., Matko, I., Petrenec, M., Sartory, B., Koutna, N., Daniel, R., Pitonak, R. & Keckes, J., 5 Apr 2017, (E-pub ahead of print) In: Acta materialia. 131.2017, 1 June, p. 391-399 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Fatigue crack closure: a review of the physical phenomena

    Pippan, R. & Hohenwarter, A., 1 Apr 2017, In: Fatigue and Fracture of Engineering Materials and Structures. 40.2017, 4, p. 471-495 25 p.

    Research output: Contribution to journal › Review article › peer-review

  53. Published

    Fracture of severely plastically deformed Ta and Nb

    Hohenwarter, A., Wurster, S. & Völker, B., 1 Apr 2017, In: International Journal of Refractory Metals and Hard Materials. 64.2017, April, p. 143-150 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Hierarchical surface patterning of Ni- and Be-free Ti- and Zr-based bulk metallic glasses by thermoplastic net-shaping

    Sarac, B., Bera, S., Balakin, S., Stoica, M., Calin, M. & Eckert, J., 1 Apr 2017, In: Materials science and engineering C (Biomimetic and supramolecular systems). 73.2017, 1 April, p. 398-405 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses

    Bera, S., Sarac, B., Balakin, S., Ramasamy, P., Stoica, M., Calin, M. & Eckert, J., Apr 2017, In: Materials and Design. 120.2017, 15 April, p. 204-211 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Transient nucleation and microstructural design in flash-annealed bulk metallic glasses

    Kosiba, K., Scudino, S., Kobold, R., Kühn, U., Greer, A. L., Eckert, J. & Pauly, S., Apr 2017, In: Acta Materialia. 127.2017, 1 April, p. 416-425 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. E-pub ahead of print

    Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation

    Li, F., Yi, J. & Eckert, J., 28 Mar 2017, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 6, p. 2971-2978 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Influence of the Ag concentration on the medium-range order in a CuZrAlAg bulk metallic glass

    Gammer, C., Escher, B., Ebner, C., Minor, A. M., Karnthaler, H.-P., Eckert, J., Pauly, S. & Rentenberger, C., 21 Mar 2017, In: Scientific reports (London : Nature Publishing Group). 7.2017, 7 p., 44903.

    Research output: Contribution to journal › Article › Research › peer-review

  59. E-pub ahead of print

    Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiCp/Al-20Si composites solidified under high pressure

    Ma, P., Wei, Z. J., Jia, Y., Yu, Z. S., Prashanth, K. G., Yang, S. L., Li, C. G., Huang, L. X. & Eckert, J., 16 Mar 2017, (E-pub ahead of print) In: Journal of alloys and compounds. 709.2017, 30 June, p. 329-336 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Thermal stability and latent heat of Nb–rich martensitic Ti-Nb alloys

    Bönisch, M., Panigrahi, A., Calin, M., Waitz, T., Zehetbauer, M., Skrotzki, W. & Eckert, J., 15 Mar 2017, In: Journal of alloys and compounds. 697.2017, 15 March, p. 300-309 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Is the energy density a reliable parameter for materials synthesis by selective laser melting?

    Prashanth, K. G., Scudino, S., Maity, T., Das, J. & Eckert, J., 9 Mar 2017, In: Materials Research Letters [Elektronische Ressource]. 5.2017, 6, p. 386-390 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Selective interface toughness measurements of layered thin films

    Konetschnik, R., Daniel, R., Brunner, R. & Kiener, D., 9 Mar 2017, In: AIP Advances. 7.2017, 3, 5 p., 035307.

    Research output: Contribution to journal › Article › Research › peer-review

  63. E-pub ahead of print

    β-type Ti-based bulk metallic glass composites with tailored structural metastability

    Zhang, L., Zhang, H., Li, W., Gemming, T., Wang, P., Bönisch, M., Şopu, D., Eckert, J. & Pauly, S., 9 Mar 2017, (E-pub ahead of print) In: Journal of alloys and compounds. 708.2017, June, p. 972-981 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Ab-initio and experimental study of phase stability of Ti-Nb alloys

    Gutiérrez Moreno, J. J., Bönisch, M., Panagiotopoulos, N. T., Calin, M., Papageorgiou, D. G., Gebert, A., Eckert, J., Evangelakis, G. A. & Lekka, C. E., 5 Mar 2017, In: Journal of alloys and compounds. 696.2017, 5 March, p. 481-489 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Fatigue crack growth anisotropy in ultrafine-grained iron

    Leitner, T., Hohenwarter, A., Ochensberger, W. & Pippan, R., 1 Mar 2017, In: Acta materialia. 126.2017, March, p. 154-165 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Phase stability of a TaTifHrZrNb high-entropy alloy

    Schuh, B., Hohenwarter, A., Völker, B., Todt, J. & Couzinié, J.-P., 1 Mar 2017.

    Research output: Contribution to conference › Poster › Research

  67. Published

    Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity

    Zhang, L., He, Z., Tan, J., Zhang, Y., Stoica, M., Prashanth, K. G., Cordill, M., Jiang, Y. H., Zhou, R. & Eckert, J., 1 Mar 2017, In: Intermetallics. 82.2017, March, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Structure of glassy Cu47.5Zr47.5Ag5 investigated with neutron diffraction with isotopic substitution, X-ray diffraction, EXAFS and reverse Monte Carlo simulation

    Jóvári, P., Kaban, I., Escher, B., Song, K. K., Eckert, J., Beuneu, B., Webb, M. A. & Chen, N., 1 Mar 2017, In: Journal of non-crystalline solids. 459.2017, 1 March, p. 99-102 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Deformation Mechanisms in Magnetron Sputtered Thin Film Metallic Glasses

    Mühlbacher, M., Gammer, C., Konetschnik, R., Schöberl, T., Mitterer, C. & Eckert, J., Mar 2017.

    Research output: Contribution to conference › Poster › Research

  70. Published

    Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

    Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bönisch, M., Volegov, A. S., Calin, M., Eckert, J. & Dargusch, M. S., Mar 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 688, p. 20-26 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Source rock assessment from basin- to nano-scale: A case study from the Ukrainian Dniepr-Donets Basin

    Misch, D., Groß, D., Klaver, J., Schmatz, J., Sachsenhofer, R., Bechtel, A., Maier-Kiener, V., Kiener, D. & Mendez Martin, F., Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  72. Published

    Additive Manufacturing: Reproducibility of Metallic Parts

    Prashanth, K. G., Scudino, S., Chatterjee, R. P., Salman, O. & Eckert, J., 18 Feb 2017, In: Technologies. 5.2017, 1, 7 p., 8.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Local melting to design strong and plastically deformable bulk metallic glass composites

    Qin, Y., Han, X., Song, K. K., Tian, Y. H., Peng, C. X., Wang, L., Sun, B., Wang, G., Kaban, I. & Eckert, J., 13 Feb 2017, In: Scientific reports (London : Nature Publishing Group). 7.2017, 10 p., 42518.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Robl, W., Zechner, J. & Mitterer, C., 9 Feb 2017, In: Journal of vacuum science & technology / B (JVST). 35.2017, 2, 11 p., 022201.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Structural anisotropy in equal-channel angular extruded nickel revealed by dilatometric study of excess volume

    Kotzurek, J. A., Sprengel, W., Krystian, M., Simic, S., Pölt, P., Hohenwarter, A., Pippan, R. & Würschum, R., 31 Jan 2017, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 108.2017, 2, p. 81-88 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. E-pub ahead of print

    The influence of microstructure on the cyclic deformation and damage of copper and an oxide dispersion strengthened steel studied via in-situ micro-beam bending

    Howard, C. B., Fritz, R., Alfreider, M., Kiener, D. & Hosemann, P. M., 22 Jan 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 687.2017, 27 February, p. 313-322 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion

    Völker, B., Jäger, N., Calin, M., Zehetbauer, M. J., Eckert, J. & Hohenwarter, A., 15 Jan 2017, In: Materials & design. 114.2017, 15 January, p. 40-46 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Micro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductility

    Okulov, I. V., Bönisch, M., Volegov, A. S., Shahabi, H. S., Wendrock, H., Gemming, T. & Eckert, J., 13 Jan 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, p. 673-678 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Introduction

    Messing, G. L., Eckert, J. & Schadler, L. S., 12 Jan 2017, In: Journal of materials research (JMR). 32.2017, 1, p. 1 1 p.

    Research output: Contribution to journal › Letter › peer-review

  80. E-pub ahead of print

    Effect of annealing on the size dependent deformation behavior of thin cobalt films on flexible substrates

    Marx, V. M., Cordill, M., Többens, D., Kirchlechner, C. & Dehm, G., 10 Jan 2017, (E-pub ahead of print) In: Thin solid films. 624.2017, 28 February, p. 34-40 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys

    Kim, J. T., Hong, S. H., Park, H. J., Kim, Y. S., Suh, J. Y., Lee, J. K., Park, J. M., Maity, T., Eckert, J. & Kim, K. B., 9 Jan 2017, In: Scientific reports (London : Nature Publishing Group). 7.2017, 13 p., 39959.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Accelerated thermo-mechanical fatigue of copper metallizations studied by pulsed laser heating

    Wurster, S., Bigl, S., Cordill, M. & Kiener, D., 5 Jan 2017, In: Microelectronic engineering. 167.2017, 5 January, p. 110-118 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. E-pub ahead of print

    Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity

    Zhang, L., He, Z. Y., Tan, J., Zhang, Y. Q., Stoica, M., Calin, M., Prashanth, K. G., Cordill, M., Jiang, Y. H., Zhou, R. & Eckert, J., 5 Jan 2017, (E-pub ahead of print) In: Intermetallics. 84.2017, May, p. 35-41 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Influence of extreme thermal cycling on metal-polymer interfaces

    Putz, B., Völker, B., Semprimoschnig, C. & Cordill, M. J., 5 Jan 2017, In: Microelectronic engineering. 167.2017, 5 January, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Phase decomposition of a single-phase AlTiVNb high-entropy alloy after severe plastic deformation and annealing

    Schuh, B., Völker, B., Maier-Kiener, V., Todt, J., LI, J. & Hohenwarter, A., 3 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 10 p., 1600674.

    Research output: Contribution to journal › Article › Research › peer-review

  86. E-pub ahead of print

    Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting

    Jia, Y., Ma, P., Prashanth, K. G., Wang, G., Yi, J., Scudino, S., Cao, F., Sun, J. & Eckert, J., 2 Jan 2017, (E-pub ahead of print) In: Journal of alloys and compounds. 699.2017, 30 March, p. 548-553 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes

    Jaumann, T., Balach, J., Langklotz, U., Sauchuk, V., Fritsch, M., Michaelis, A., Teltevskij, V., Mikhailova, D., Oswald, S., Klose, M., Stephani, G., Hauser, R., Eckert, J. & Giebeler, L., 1 Jan 2017, In: Energy Storage Materials. 6.2017, January, p. 26-35 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Microstructure, mechanical behavior, and wear properties of FeCrMoVC steel prepared by selective laser melting and casting

    Sander, J., Hufenbach, J., Giebeler, L., Bleckmann, M., Eckert, J. & Kühn, U., 1 Jan 2017, In: Scripta materialia. 126.2017, 1 January, p. 41-44 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Nanostructured coatings for tooling applications

    Köpf, A., Keckes, J., Todt, J., Pitonak, R. & Weissenbacher, R., 1 Jan 2017, In: International Journal of Refractory Metals and Hard Materials. 62.2017, January, Part B, p. 219-224 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Self-Terminating Confinement Approach for Large-Area Uniform Monolayer Graphene Directly over Si/SiOX by Chemical Vapor Deposition

    Pang, J., Mendes, R. G., Wrobel, P. S., Wlodarski, M. D., Ta, H. Q., Zhao, L., Giebeler, L., Trzebicka, B., Gemming, T., Fu, L., Liu, Z., Eckert, J., Bachmatiuk, A. & Ruemmeli, M. H., Jan 2017, In: ACS nano. 11.2017, 2, p. 1946-1956 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Application of the configurational forces concept for the design of tough, strong and damage-tolerant composites

    Sistaninia, M., 2017

    Research output: Thesis › Doctoral Thesis

  92. Published

    Characterisation of novel metallic films on silicon using nanoindentation

    Kampichler, J., 2017

    Research output: Thesis › Diploma Thesis

  93. Published

    Crack Driving Force in Twisted Plywood Structures

    Fischer, F.-D., Kolednik, O., Predan, J., Razi, H. & Fratzl, P., 2017, In: Acta biomaterialia. 55.2017, June, p. 349-359 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Hofer, C., Keckes, J., Deluca, M., Pohler, M. & Czettl, C., 2017.

    Research output: Contribution to conference › Poster › Research

  95. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2017, 19th Plansee Seminar. p. 88/1-88/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Damage Tolerant Design Concepts for the Application of High strength Materials in Railway Switch Components

    Kolitsch, S., 2017

    Research output: Thesis › Doctoral Thesis

  97. Published

    Depth resolved stress gradient and dislocation analyses in III-N multilayer structures

    Reisinger, M., 2017

    Research output: Thesis › Doctoral Thesis

  98. Published

    Dislocation slip transfer mechanisms: quantitative insights from in situ micromechanical testing

    Kirchlechner, C., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  99. Published

    Granulation of bulk metallic glass forming alloys as a feedstock for thermoplastic forming and their compaction into bulk samples

    Geissler, D., Grosse, J., Donath, S., Ehinger, D., Stoica, M., Eckert, J. & Kühn, U., 2017, THERMEC 2016. Trans Tech Publications, Vol. 879. p. 589-594 6 p. (Materials Science Forum; vol. 879).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    In Situ X-Ray Synchrotron Profile Analysis During High Pressure Torsion of Ti

    Schafler, E., Kerber, M. B., Spieckermann, F., Fischer, T., Schuster, R. & Baeckmann, C. V., 2017, Magnesium Technology 2017. Springer Nature, p. 645-651 7 p. ( The Minerals, Metals & Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  101. Published

    Locally resolved fracture mechanisms by using in-situ microscopic testing

    Alfreider, M., Kozic, D., Kolednik, O. & Kiener, D., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...20 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112