Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

301 - 400 out of 1,066Page size: 100

Research output

  1. 2019
  2. Published

    Thermodynamic Model of Ion-Exchange Process as Exemplified by Cerium Sorption from Multisalt Solutions

    Cheremisina, O. V., Schenk, J., Cheremisina, E. A. & Ponomareva, M. A., 1 Jan 2019, In: Journal of Mining Institute. 237.2019, p. 307-316 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Bedeutung des Reinheitsgrads für die Zerspanungseigenschaften ausgewählter Stahlsorten

    Maunz, M., 2019

    Research output: Thesis › Master's Thesis

  4. Published

    Charakterisierung der Spritzwasserkühlung in der Sekundärkühlzone einer Brammenstranggießanlage

    Preuler, L., 2019

    Research output: Thesis › Doctoral Thesis

  5. Published

    Ein Studium über die Krustenbildung im Meniskus in der Kokille beim Stranggießen

    Li, T., 2019

    Research output: Thesis › Master's Thesis

  6. Published

    Evaluation of AHSS concepts with a focus on the product properties and appropriate casting characteristics of Arvedi ESP thin slab casters

    Bernhard, C., Linzer, B., Presoly, P., Watzinger, I. & Watzinger, J., 2019, In: IOP Conference Series: Materials Science and Engineering. 529.2019, 012071, p. 1-10 10 p., 012071.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Experimental research and mathematical modelling of the melting and dissolution behaviour of scrap in liquid hot metal

    Penz, F., 2019

    Research output: Thesis › Doctoral Thesis

  8. Published

    Investigation of water droplet impingement under conditions of the secondary cooling zone of a continuous slab caster

    Preuler, L., Peyha, M., Weiß, C., Bernhard, C. & Ilie, S., 2019, AISTech - Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 1441-1449 9 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    KIC RawMaterials: Iron Balance—Austria

    Wolfinger, T., Spreitzer, D., Zarl, M., Pichler, A. & Schenk, J., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 183 - 187 5 p.

    Research output: Contribution to journal › Article › Research

  10. Published

    Microstructural Evolution of Blast Furnace Coke During Experimental Heating —The IFORS Approach

    Rantitsch, G., Bhattacharyya, A. & Schenk, J., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 2019, 130, p. 1 - 4 4 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Modeling of the secondary refining process of steel

    You, D., Michelic, S. K. & Bernhard, C., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Thermodynamische Modellierung des Betriebs von Direktreduktionsanlagen mit maximalem Anteil an Wasserstoff

    Baumgartner, H.-J., 2019

    Research output: Thesis › Master's Thesis

  13. Published

    The role of FeTi-addition on micro-inclusions in the production of ULC steel grades via RH-process route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 2019, Proceedings of the 4th European Steel Technology and Application Days (ESTAD). 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Untersuchungen zur Oberflächenrissbildung beim Stranggießen von Stahl

    Krobath, R., 2019

    Research output: Thesis › Doctoral Thesis

  15. Published

    Validation of AlN precipitation modelling results by in-situ austenite grain growth observations

    Schnalzger, M., 2019

    Research output: Thesis › Master's Thesis

  16. 2018
  17. Published

    Dissolution of Scrap in Hot Metal under Linz-Donawitz (LD) Steelmaking Conditions

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., 18 Dec 2018, In: Metals : open access journal . 8.2018, 1078, 9 p., 1078.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Thermodynamic of Liquid Iron Ore Reduction by Hydrogen Thermal Plasma

    Naseri Seftejani, M. & Schenk, J., 11 Dec 2018, In: Metals : open access journal . 8, 12, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Abrasiveness of mining slurries: influence of the morphology, concentration of slurries, mean grain size and nature of the abrasive particles

    Moreira, V. E. S., Silva, F. C., Quintao, V. M., Siqueira, F., Kaelber, F., Meinhold, S., Schenk, J. & Rodrigues da Costa, A., 3 Dec 2018.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    Dissolution behaviour of ULC steel in carbon saturated hot metal

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., Dec 2018, In: Metallurgia Italiana. 110.2018, 11-12, p. 36-45 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Influence of Iron Minerals on the Volume, Strength, and CO2 Gasification of Ferro-coke

    Xu, R., Zheng, H., Wang, W., Schenk, J. & Xue, Z., Dec 2018, In: Energy and Fuels. 32, 12, p. 12118-12127

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Slag characterisation of 308L-type stainless steel rutile flux-cored wires

    Holly, S., Mayer, P. M., Bernhard, C. & Posch, G., 30 Nov 2018, In: Welding in the world. 63, p. 293-311

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Experimental determination of the strength and reactivity of lumpy and briquetted chars from non-coking coals under melter-gasifier conditions

    Bhattacharyya, A., Schenk, J. & Heckmann, H., 26 Nov 2018, In: Ironmaking and steelmaking. 45, 10, p. 907-912

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Freisetzungsbestimmende Mechanismen von Schwermetallen in Stahlwerksschlacken - Analyse, Modellierung, Synthesen

    Neuhold, S. F., Vollprecht, D., Presoly, P., Schenk, J. & Adamczyk, B., 7 Nov 2018, Recy & DepoTech 2018: Vorträge-Konferenzband. Leoben, p. 135-140 122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Neuartige Zweistoffdüsen steigern die Energieeffizienz der Sekundärkühlung

    Wolff, R., Frick, J., Bernhard, C. & Taferner, M., 7 Nov 2018, In: Stahl und Eisen. 2018, 138, p. 111-114

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Transport Properties of HPSR Gases

    Naseri Seftejani, M. & Schenk, J., 24 Oct 2018, The Chinese Society for Metals.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Influence of casting temperature on the microstructure of AISI M42 high speed steel

    Baumgartner, K., Bernhard, C., Pfeiffer, A., Wieser, G. & Hafok, M., 18 Oct 2018, Ingot rolling, casting, forging 2018. p. 321 - 329 ICRF-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Experimental Investigation of the System Nonmetallic Inclusion-Molten Steel-Refractory System at High Temperatures

    Diéguez Salgado, U., Dorrer, P., Michelic, S. K. & Bernhard, C., Oct 2018, In: Journal of Materials Engineering and Performance. 27, 10, p. 4983-4988 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Guest Editorial - EUROMAT 2017 Symposia on Processing

    Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., Oct 2018, In: Journal of Materials Engineering and Performance. 27.2018, 10, p. 4981-4982

    Research output: Contribution to journal › Editorial › peer-review

  30. Published

    Effect of the Particle Size of Iron Ore on the Pyrolysis Kinetic Behaviour of Coal-Iron Ore Briquettes

    Zheng, H., Wang, W., Xu, R., Zan, R., Schenk, J. & Xue, Z., 29 Sept 2018, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 11, 10, 16 p., 2595.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    THERMODYNAMIC ASPECTS OF HYDROGEN PLASMA SMELTING REDUCTION OF IRON OXIDES

    Naseri Seftejani, M. & Schenk, J., 20 Sept 2018, Austrian Society for Metallurgy and Materials: ASMET. ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    An alternative approach for the experimental verification of microsegregation models using an in-situ hot tensile test during solidification of steel

    Bernhard, M. C., Presoly, P., Bernhard, C. & You, D., 3 Sept 2018, Proceedings of the 7th International Conference on Solidification and Gravity 2018. Miskolc-Lillafüred, Hungary

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    High concentrations at the final solidification of advanced steels: Thermodynamic evaluation of replicated “segregation-samples” by means of DTA/DSC-measurements

    Presoly, P., Bernhard, M. C., You, D. & Bernhard, C., 3 Sept 2018, Solidification and Gravity VII. p. 138-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    MICROSTRUCTURAL EVOLUTION OF BLAST FURNACE COKE DURING EXPERIMENTAL HEATING – THE IFORS APPROACH

    Rantitsch, G., Bhattacharyya, A. & Schenk, J., Sept 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    STRUCTURAL CHARACTERIZATION OF COKE FROM THE TUYERE REGION OF THE BLAST FURNACE

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Janhsen, U. & Guenbati, A., Sept 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Fluid Force-Induced Detachment Criteria for Nonmetallic Inclusions Adhered to a Refractory/Molten Steel Interface

    Dieguez Salgado, U., Weiß, C., Michelic, S. K. & Bernhard, C., 1 Aug 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 49, 4, p. 1632-1643 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Kinetics of molten iron oxides reduction using hydrogen

    Naseri Seftejani, M. & Schenk, J., Jul 2018, In: Metallurgia Italiana. n. 7/8 2018, 0026-0843, p. 5-14 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    DISSOLUTION BEHAVIOUR OF ULC STEEL IN CARBON SATURATED HOT METAL

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., 13 Jun 2018, p. ICS070. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    Formation of multi-type inclusions during the cooling and solidification of steel: A trend model

    You, D., Michelic, S. K. & Bernhard, C., 13 Jun 2018, In: Metals : open access journal . 8, 6, 452.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    The way to a carbon free steelmaking

    Sormann, A., Schenk, J., Naseri Seftejani, M., Zarl, M. A. & Spreitzer, D., 10 Jun 2018.

    Research output: Contribution to conference › Paper › peer-review

  41. Published

    Modelling the dependence of sinter bed permeability on sinter porosity and structure

    Höftberger, A., Bhattacharyya, A., Schenk, J., Weiß, C., Schaffer, C. & Schuster, E., Jun 2018, Proceedings of ADMET 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Investigation of the Fe-C-Si-Mn system with special focus on the Fe – 3 wt.-% Si – high Mn section

    Presoly, P., Bernhard, M. C. & Bernhard, C., 30 May 2018, CALPHAD XLVII - Conference Program. p. 50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Characterization of Ironmaking Raw Materials Using Computed Tomography

    Bhattacharyya, A., Schenk, J., Habe, D. & Oberdorfer, B., May 2018, AISTECH 2018 Proceedings. p. 211 216 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Evolution of Metallurgical Properties and Microstructures of Lump Coal During the Descending Process in COREX Gasifier

    Xu, R., Zheng, H., Wang, W., Schenk, J., Bhattacharyya, A., Xue, Z. & Song, M., 18 Apr 2018, In: International journal of coal preparation and utilization. p. 1-17 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Investigation of the content hexavalent chromium occurred in slags during steel making process

    Cheremisina, E. & Schenk, J., 1 Apr 2018, In: Ćernye metally : dvuchnedel'nyj proizvodstvenno-techničeskij žurnal po problemam černoj metallurgii . 4, p. 11-12 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Gasification Reactivity and Structure Evolution of Metallurgical Coke under H2O/CO2 Atmosphere

    Xu, R., Dai, B., Wang, W., Schenk, J., Bhattacharyya, A. & Xue, Z., 15 Feb 2018, In: Energy and Fuels. 32, 2, p. 1188-1195 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Fundamentals of hydrogen plasma smelting reduction (HPSR) of iron oxides, a new generation of steelmaking processes

    Naseri Seftejani, M. & Schenk, J., 6 Feb 2018.

    Research output: Contribution to conference › Paper › peer-review

  48. Published

    Analysis of the Alkali Flow in Ironmaking Reactors by a Thermochemical Approach: Blast Furnace

    Pichler, A., Hauzenberger, F., Schenk, J., Stocker, H. & Thaler, C., 1 Feb 2018, In: Steel research international. 89, 2, 1700303.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Effect of iron ore type on the thermal behaviour and kinetics of coal-iron ore briquettes during coking

    Xu, R., Dai, B., Wang, W., Schenk, J. & Xue, Z., 12 Jan 2018, In: Fuel Processing Technology. 173.2018, May, p. 11-20 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Dissolution rate of various MgO materials in steel and secondary metallurgy slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., 1 Jan 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Association for Iron and Steel Technology, AISTECH, Vol. 2018-May. p. 1103-1115 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Kinetics of hydrogen plasma smelting reduction of iron oxides

    Seftejani, M. N. & Schenk, J., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Bestimmung der Korrelation zwischen Oxidation und Reduktion von magnetitischem Eisenerzkonzentrat

    Wolfinger, T., 2018

    Research output: Thesis › Master's Thesis

  53. Published

    Beurteilung der Einflussgrößen auf die Verdüsbarkeit von Metallschmelzen

    Hirtler, M., 2018

    Research output: Thesis › Master's Thesis

  54. Published

    Correlation of evaluation methods of iron ore pellets with their performance in a direct reduction plant

    Schwarz, G., 2018

    Research output: Thesis › Master's Thesis

  55. Published

    Einschlusscharakterisierung über die Prozessstufen des Additive Manufacturing eines PH - Stahls

    Auer, M., 2018

    Research output: Thesis › Master's Thesis

  56. Published

    Energy efficiency in secondary cooling - New generation of air-mist nozzles with reduced air consumption and high cooling efficiency

    Wolff, R., Frick, J., Bernhard, C. & Taferner, M., 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Association for Iron and Steel Technology, AISTECH, Vol. 2018-May. p. 145-152 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  58. Published

    Investigation of particle attraction by steel/refractory and steel/gas interfaces and the associated relevance for clogging in casting processes

    Dieguez Salgado, U., 2018

    Research output: Thesis › Doctoral Thesis

  59. Published

    Investigation of the Precipitation Behavior of H-Carbides in a TiAl Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Statistische Auswertung heißriss-relevanter Prozessparameter im schweren Stahlguss

    Berger, M., 2018

    Research output: Thesis › Master's Thesis

  62. Published

    Untersuchung der Beeinflussung des Erstarrungsgefüges von HSS-Werkstoffen

    Stöckl, M., 2018

    Research output: Thesis › Master's Thesis

  63. 2017
  64. Published

    Experimental Investigations on Spray Characteristics of Water-Air Nozzles

    Preuler, L., Bernhard, C., Ilie, S. & Six, J., 21 Dec 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 163.2018, 1, p. 29-36 8 p.

    Research output: Contribution to journal › Article › Research

  65. Published

    TOWARDS CO2 LEAN IRONMAKING – A REASONABLE WAY FOR INDIA´S STEEL INDUSTRY

    Schenk, J., 11 Dec 2017, 3rd nternational Conference on Science and Technology of Ironmaking & Steelmaking. Kanpur, India

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Calculation Model to Quantify the Amount of Carry-Over Slag From Primary Metallurgical Plants

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., Dec 2017, In: Bulletin. The Journal of Refractory Innovations. 1, Autumn, p. 76 - 81 6 p.

    Research output: Contribution to journal › Article › Research

  67. Published

    On the Formation Potential of Acicular Ferrite Microstructure in Different Steel Grades Focusing on the Influence of Carbon Content

    Loder, D., Mayerhofer, A. & Michelic, S. K., 1 Nov 2017, In: Iron and Steel Technology. 2017, 11, p. 78-85 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Chromium Stability in Steel Slags

    Cheremisina, E. & Schenk, J., Nov 2017, In: Steel research international. 88.2017, 11, 7 p., 1700206.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Modeling Inclusion Formation during Solidification of Steel: A Review

    You, D., Michelic, S. K., Presoly, P., Liu, J. & Bernhard, C., 17 Oct 2017, In: Metals : open access journal . 7.2017, 11, 1 p., 460.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Charakterisierung von azikularferritischen Phasenanteilen in HSLA- Stählen und deren Auswirkung auf die mechanischen Kennwerte bei Kleinstproben

    Mayerhofer, A., Bernhard, C. & Michelic, S. K., 13 Sept 2017, p. 125. 130 p.

    Research output: Contribution to conference › Paper › peer-review

  71. Published

    Experimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO-Al2O3-SiO2-MgO Slags

    Michelic, S. K. & Bernhard, C., 8 Aug 2017, In: Scanning. 2017, 15 p., 2326750.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Kein sechswertiges Chrom in Stahlwerksschlacken

    Cheremisina, E. & Schenk, J., Aug 2017, In: Stahl und Eisen. 137, 8, p. 33-34 2 p.

    Research output: Contribution to journal › Letter

  73. Published

    BOCAL PARA A INJEÇÃO DE GÁS CONTENDO OXIGÊNIO EM UM DISPOSITIVO DE FERRO GUSA DOTADO DE UM TUBO DE INSERÇÃO INJETOR

    Stefan, L. (Inventor), Marinko, L.-N. (Inventor), Georg, A. (Inventor), Franz, B. (Inventor), Johannes, L. S. (Inventor), Martin, S. (Inventor), Thomas, S. (Inventor), Bogdan, V. (Inventor), Wieder, K. (Inventor) & Wurm, J. (Inventor), 11 Jul 2017, IPC No. F27D 3/ 16 A I, Patent No. BRPI0922727, Priority date 5 Nov 2009, Priority No. WO2009EP64685

    Research output: Patent

  74. Published

    Further development and validation of IDS by means of selected experiments

    Presoly, P., Bernhard, C., Fuchs, N., Miettinen, J., Louhenkilpi, S. & Laine, J., 27 Jun 2017, Proceedings of 9th ECCC European Continuous Casting Conference - ECCC2017. Vienna: ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Effect of Scrap Composition on the Thermodynamics and Kinetic Modelling of BOF Converter

    Penz, F. M., Bundschuh, P., Schenk, J., Pastucha, K., Panhofer, H. & Paul, A., 11 Jun 2017, p. 1-10. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  76. Published

    INVESTIGATION OF THE SPECIFIC SURFACE AREA AND PORE STRUCTURE OF BLAST FURNACE SINTERS

    Bhattacharyya, A., Schenk, J., Schaffer, C., Schadler, S. & Schuster, E., Jun 2017, European Steel Technology and Application Days ESTAD 2017: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    The potential for grain refinement of a super austenitic stainless steel with a cerium grain refiner

    Baumgartner, K., Bernhard, C., Presoly, P., Hafok, M. & Leitner, H., 25 May 2017, ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition. Associazione Italiana di Metallurgia, Vol. 2017-May.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    The Effect of H2O on the Reactivity and Microstructure of Metallurgical Coke

    Wang, W., Bowen, D., Xu, R., Schenk, J., Wang, J. & Xu, Z., 24 May 2017, In: Steel research international. 88.2017, 8, p. 1-9 9 p., 1700063.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Calculation model to quantify the amount of carry-over slag from primary metallurgical aggregates

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., 11 May 2017, Proceedings of ISDM Conference 2017. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    A New Experimental Setup for the Simulation of Surface Crack Formation in the Continuous Casting Process

    Krobath, R. & Bernhard, C., 8 May 2017, p. 1827 - 1837. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  81. Published

    On the Capability of Nonmetallic Inclusions to Act as Nuclei for Acicular Ferrite in Different Steel Grades

    Loder, D., Michelic, S. K., Mayerhofer, A. & Bernhard, C., 4 May 2017, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 48.2017, 4, p. 1992-2006 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., Apr 2017, In: Metallurgia Italiana. 109.2017, 4, p. 5-13 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., Apr 2017, In: Iron and Steel Technology. 14.2017, 4, p. 100-108 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Metallurgical approach for the development of a hot crack-resistant metal-cored wire

    Holly, S., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., 2 Mar 2017, In: Welding in the world. 61.2017, May, p. 423-434 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Modeling of manganese sulfide formation during the solidification of steel

    You, D., Michelic, S. K., Wieser, G. & Bernhard, C., Feb 2017, In: Journal of materials science. 52.2017, 3, p. 1797-1812 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Influence of Magnesium Oxide content on kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Ludwig, N., Paul, A. & Wimmer, G., 17 Jan 2017, In: ISIJ international. 57.2017, 2, p. 304-313 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Influence of operation parameters on the cooling performance of water-air nozzles

    Preuler, L., Bernhard, C., Ilie, S. & Six, J., 1 Jan 2017, METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings. Vol. 2017-January. p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Acicular Ferrite Formation and Its Influencing Factors - A Review

    Loder, D., Michelic, S. K. & Bernhard, C., Jan 2017, In: Journal of Materials Science Research. 6.2017, 1, p. 24-43 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    A holistic approach for the characterization of coke for optimized usage in the blast furnace ironmaking process

    Bhattacharyya, A. & Schenk, J., 2017.

    Research output: Contribution to conference › Paper › peer-review

  90. Published

    Characterization of Coke and Char for Optimized Use in Ironmaking Processes

    Bhattacharyya, A., 2017

    Research output: Thesis › Doctoral Thesis

  91. Published

    Charakterisierung von nichtmetallischen Einschlüssen im System Fe-Ce-Al-O

    Schmid, F., 2017

    Research output: Thesis › Master's Thesis

  92. Published

    Einfluss der Schlackenführung in der Sekundärmetallurgie auf den Reinheitsgrad und das Clogging-Verhalten von ULC-Stählen

    Penz, A., 2017

    Research output: Thesis › Master's Thesis

  93. Published

    Einstellung des Phosphorgehaltes durch gezielte Nachbehandlung am Konverter

    Mairhofer, S. M., 2017

    Research output: Thesis › Master's Thesis

  94. Published

    Entwicklung und Evaluierung eines Pre-Prozessor Modells für LD-Konverter

    Zarl, M. A., 2017

    Research output: Thesis › Master's Thesis

  95. Published

    Kinetic model on manganese sulfide formation during solidification of steel

    You, D., Michelic, S. K., Presoly, P. & Bernhard, C., 2017, 6th Decennial International Conference on Solidification Processing (SP17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Modeling microsegregation and nonmetallic inclusion formation based on thermodynamic databases

    You, D., 2017

    Research output: Thesis › Doctoral Thesis

  97. Published

    Möglichkeiten und Grenzen von Modellen zur Vorhersage der Auslaugbarkeit von Stahlwerksschlacken

    Höllen, D., Neuhold, S., Mudersbach, D., Schüler, S., Sommerauer, H., Griessacher, T., Dijkstra, J., van Zomeren, A., Presoly, P., Schenk, J. & Pomberger, R., 2017, Mineralische Nebenprodukte und Abfälle: Aschen, Schlacken, Stäube und Baurestmassen. Vol. 4. p. 205-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    On the Relevance of Microsegregation Models for Process Control in Continuous Casting of Steel

    Bernhard, M. C., Presoly, P., Bernhard, C., Six, J. & Ilie, S., 2017, Conference Proceedings of the 26th Anniversary International Conference on Metallurgy and Materials - Metal 2017. Brno, Czech Republic

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Optimization of Coal Briquettes for Lower Reactivity and Higher Strength under Melter-gasifier Conditions

    Bhattacharyya, A., Heckmann, H., Schenk, J. & Wurm, J., 2017.

    Research output: Contribution to conference › Paper › peer-review

  100. Published

    Selected aspects of inclusion metallurgy in steelmaking

    Michelic, S. K., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  101. Published

    Study of Clogging Deposit Buildup in Al-killed and Ca-Treated High-Sulfur Steels With Focus on the Steel/Refractory Interface

    Dorrer, P., Michelic, S., Klösch, G., Reiter, J., Paul, A. & Bernhard, C., 2017, AISTech 2017 Proceedings. p. 1555 - 1565

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Thermochemical modelling of the FINEX® process to determine the material flow of alkalis, halides and zinc

    Leitner, T., 2017

    Research output: Thesis › Master's Thesis

  103. Published

    Thermodynamische und kinetische Modellierung von LD-Konvertern

    Bundschuh, P., 2017

    Research output: Thesis › Doctoral Thesis

Previous 1 2 3 4 5 6 7 8 ...11 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201