Chair of Designing Plastics and Composite Materials (250)

Organisational unit: Chair

101 - 131 out of 131Page size: 100

Research output

  1. 2016
  2. Published

    Dynamic Finite Element Model- Impact Force and Contact Pressure for Measured Geometries of Fixed Crossings

    Pletz, M., Ossberger, U., Ossberger, H. & Daves, W., 3 May 2016, The Dynamics of Vehicles on Roads and Tracks - Proceedings of the 24th Symposium of the International Association for Vehicle System Dynamics, IAVSD 2015. p. 1337-1346 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    FE Modelle zur indirekten Bestimmung des Reibkoeffizienten im Stauchversuch

    Brunbauer, S., Kaufmann, A. & Pletz, M., 14 Apr 2016, p. 63-69.

    Research output: Contribution to conference › Paper

  4. Published

    Bottom-up parametric hybrid cost estimation for composite aerospace production

    Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Residual lifetime determination of low temperature co-fired ceramics

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications, Vol. 713. p. 266-269 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. 2015
  8. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  9. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  10. 2014
  11. Published

    Multi-scale finite element modeling to describe rolling contact fatigue in a wheel-rail test rig

    Pletz, M., Daves, W., Yao, W., Kubin, W. & Scheriau, S., Dec 2014, In: Tribology International. 80, p. 147-155

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. 2013
  14. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. 2012
  16. Published

    A Wheel Passing a Crossing Nose- Dynamic Analysis under High Axle Loads using Finite Element Modelling

    Pletz, M., Daves, W. & Ossberger, H., 10 Oct 2012, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 226, 6, p. 603-611 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Auslegung alternativer Schnapphaken-Geometrien am Beispiel eines Babyschnullers

    Krems, L., 2012

    Research output: Thesis › Master's Thesis

  18. Published

    A wheel set/crossing model regarding impact, sliding and deformation-Explicit finite element approach: Wear

    Pletz, M., Daves, W. & Ossberger, H., 2012, In: Wear. 294-295, p. 446-456 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Gestaltoptimierung und Auslegung einer Winkelführungsplatte mittels der Methode der Finiten Elemente mit integrierter Bauteilverifikation

    Juster, H. R., 2012, 100 p.

    Research output: Thesis › Master's Thesis

  20. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2011
  22. Published

    Berechnung und Prüfung von Klebeverbindungen unter besonderer Berücksichtigung der Schälspannungen

    Zaucher, P., 2011, 20. Leobener Kunststoff-Kolloquium: „Polymerer Leichtbau“. p. 113-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2010
  25. Published

    Finite Elemente Analyse einer unter Einfluss von heißer Schwefelsäure stehenden Zentrifuge aus Kunststoff

    Hörbinger, H., 2010

    Research output: Thesis › Master's Thesis

  26. Published

    Für immer und ewig. Gestaltung und Auslegung von dauerhaften Klebenverbindungen

    Zaucher, P., 2010, In: KEM (Informationsvorsprung für Konstrukteure). p. 74-75

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Substitution konventioneller Werkstoffe in handgeführten Elektrowerkzeugen

    Stock, A., 2010

    Research output: Thesis › Master's Thesis

  28. 2009
  29. Published

    Nachwachsende Rohstoffe im Rohbau

    Gössl, J. C., 2009

    Research output: Thesis › Master's Thesis

  30. 2008
  31. Published

    Oberflächenkonzepte für großflächige Strukturbauteile mit Class-A-Anforderungen aus duroplastischen Werkstoffen

    Horejsi, K., 2008

    Research output: Thesis › Master's Thesis

  32. 2007
  33. Published

    Machbarkeitsstudie eines geklebten Kunststoff-Metall-Hybridquerträgers für die Instrumententafel

    Thaler, S., 2007, 117 p.

    Research output: Thesis › Diploma Thesis

  34. 2006
  35. Published

    Advanced Finite Element Analysis for High Power Wind Energy Systems

    Wörndle, R. & Karall, T., 2006, 2006 8th International Conference on Actual Problems of Electronic Instrument Engineering Proceedings Vol. 1 (APEIE-2006 in 7 volumes ; Novosibirsk, September 26 - 28, 2006). State Technical University, p. 234-239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Grundlegende prozesstechnische Untersuchungen zur Optimierung des RFI-Prozesses für den industriellen Einsatz

    Weinberger, T., 2006, 103 p.

    Research output: Thesis › Diploma Thesis

  37. 2005
  38. Published

    Rechnerische Ermittlung der Querschnittskennwerte inhomogener, anisotroper, dünnwandiger Balken

    Karall, T. & Wörndle, R., 2005, In: VLK-News. p. 4-8

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Zur rechnerischen Ermittlung der Schubspannungsverteilungen infolge Querkraft und Torsion von homogenen oder inhomogenen, isotropen oder anisotropen dünnwandigen Balken beliebiger Querschnittsform

    Karall, T., 2005, 224 p.

    Research output: Thesis › Doctoral Thesis

  40. 2003
  41. Published

    Ein Kunststofffenster zeigt Profil. Thermische und mechanische Optimierung eines Fensterrahmens

    Wörndle, R., Fritz, M., Neumeyer, [. V. & Kitzmüller, [. V., 2003, In: Kunststoffe. p. 4-8

    Research output: Contribution to journal › Article › Research › peer-review

  42. 2002
  43. Published

    Mehr Sein mit Schein. Analyse des Verzugsverhaltens eines Scheinwerferreflektors

    Wörndle, R. & Fritz, M., 2002, In: VLK-News. p. 11-13

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2001
  45. Published

    Thermoplastische Träume durch Schäume. Wirtschaftliches Schaumspritzgießen für individuelle Bauteileigenschaften

    Wörndle, R., Steinbichler, G., Egger, P., Spiegl, B. & Wurnitsch, C., 2001, In: Kunststoffe. 91, p. 64-67

    Research output: Contribution to journal › Article › Research › peer-review

  46. 2000
  47. Published

    Lange Faser spritzgießen. Faserschädigung und Faserlängeneinfluss auf die Materialeigenschaften bei LFT

    Wörndle, R., Hafellner, R., Pichler, M., Steinbichler, G. & Egger, P., 2000, In: Kunststoffe. 90, p. 44-48

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2501