Chair of Designing Plastics and Composite Materials (250)

Organisational unit: Chair

1 - 50 out of 131Page size: 50

Research output

  1. 2025
  2. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 27. März 2025, ??? Stand: 27. März 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Enhancement of copper nanoparticle yield in magnetron sputter inert gas condensation by applying substrate bias voltage and its influence on thin film morphology

    Knabl, F., Gutnik, D., Patil, P., Bandl, C., Vermeij, T., Pichler, C. M., Putz, B. & Mitterer, C., Dec 2024, In: Vacuum. 230, 113724.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    An optimization strategy for customizable global elastic deformation of unit cell-based metamaterials with variable material section discretization

    Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs, P. F., Schlögl, S. & Berer, M., 12 Nov 2024, In: Advances in Engineering Software. 199.2025, January, 17 p., 103817.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Magnetospheric Venus Space Explorers (MVSE) mission: A proposal for understanding the dynamics of induced magnetospheres

    Albers, R., Andrews, H., Boccacci, G., Castro Pires, V. D., Laddha, S., Lundén, V., Maraqten, N., Matias, J., Krämer, E., Schulz, L., Palanca, I. T., Teubenbacher, D., Baskevitch, C., Covella, F., Cressa, L., Moreno, J. G., Gillmayr, J., Hollowood, J., Huber, K. & Kutnohorsky, V. & 10 others, Lennerstrand, S., Malatinszky, A., Manzini, D., Maurer, M., Nidelea, D. M. A., Rigon, L., Sinjan, J., Suarez, C., Viviano, M. & Knutsen, E. W., 19 May 2024, (E-pub ahead of print) In: Acta astronautica. 221.2024, August, p. 194-205 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Evaluation of existing and introduction of new incremental crack propagation approaches in FEM

    Pletz, M., Frankl, S. M. & Schuecker, C., 3 May 2024, In: Theoretical and Applied Fracture Mechanics. 131.2024, June, 11 p., 104452.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    ConForce: Computation of configurational forces for FEM results

    Rettl, M., Frankl, S. M., Pletz, M., Tauscher, M. & Schuecker, C., 1 Apr 2024, In: SoftwareX. 26.2024, May, 6 p., 101718.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    M5 — Mars Magnetospheric Multipoint Measurement Mission: A multi-spacecraft plasma physics mission to Mars

    Larkin, C. J. K., Lundén, V., Schulz, L., Baumgartner-Steinleitner, M., Brekkum, M., Cegla, A., Dazzi, P., Iuliis, A. D., Gesch, J., Lennerstrand, S., Nesbit-Östman, S., Castro Pires, V. D., Palanca, I. T., Teubenbacher, D., Enengl, F. & Hallmann, M., 15 Mar 2024, In: Advances in Space Research. 73.2024, 6, p. 3235-3255 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Delamination prevention of composite joints with asymmetric carbon-fiber reinforced plastic adherends

    Castro Pires, V. D., Carbas, R. J., Marques, E. A. & Silva, L. F. D., 9 Feb 2024, (E-pub ahead of print) In: Journal of composite materials. 58.2024, 8, p. 1015-1029 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    The reduction of stress concentrations in adhesive joints with the use of curved aluminum adherends

    Castro Pires, V. D., Ribeiro, F. C. C., Carbas, R., Marques, E. A. S. & Silva, L. F. M. D., 12 Jan 2024, In: Mechanics of advanced materials and structures. 31.2024, 28, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    A comprehensive methodology for criticality assessment of microvias in printed circuit board assemblies

    Kamble, V. G., Patel, D. R., Schipfer, C., Thalhamer, A., Zuendel, J., Krivec, T., Antretter, T. & Fuchs, P. F., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Failure of orthogonal woven composites

    Pettinger, M., 2024

    Research output: Thesis › Master's Thesis

  14. Published

    Optimization of toughness in materials with propagating and reinitiating cracks

    Rettl, M., 2024

    Research output: Thesis › Doctoral Thesis

  15. Published

    Single and Multi-material Topology Optimization of Continuum Structures: ABAQUS Plugin

    Patel, D., Rockenbauer, T., Schlögl, S. & Lang, M., 2024, Mathematical Modeling in Physical Sciences - 12th IC-MSQUARE, 2023. Vlachos, D. (ed.). Springer, p. 3-17 15 p. (Springer Proceedings in Mathematics and Statistics; vol. 446).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Understanding high-temperature plasticity in silicon

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Virtual Optimization of 3D Printed Structures with Tailored Mechanical and Functional Properties

    Thalhamer, A., 2024

    Research output: Thesis › Doctoral Thesis

  18. 2023
  19. Published

    A black-box optimization strategy for customizable global elastic deformation behavior of unit cell-based tri-anti-chiral metamaterials

    Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs, P. F., Schlögl, S. & Berer, M., Dec 2023, In: Advances in Engineering Software. 186.2023, December, 19 p., 103553.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Study of a novel curved single lap joint concept with non-uniform adhesive thickness: Master thesis in Mechanical Engineering

    Pires, V. D. C., 5 Jul 2023

    Research output: Thesis › Doctoral Thesis

  21. E-pub ahead of print

    Evaluation of combinatorial algorithms for optimizing highly nonlinear structural problems

    Rettl, M., Pletz, M. & Schuecker, C., 28 Apr 2023, (E-pub ahead of print) In: Materials and Design. 230.2023, June, 15 p., 111958.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Parameter Study on Force Curves of Assembled Electronic Components on Foils during Injection Overmolding Using Simulation

    Hubmann, M., Bakr, M., Groten, J., Pletz, M., Vanfleteren, J., Bossuyt, F., Madadnia, B. & Stadlober, B., 19 Apr 2023, In: Micromachines. 14.2023, 4, 15 p., 876.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

    Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

    Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    3D Printed Device for Avoiding Hand Contact with Shared Surfaces: The Handgenic

    Pais, A. I., Ferreira, C., Pires, V., Silva, V., Alves, J. L., Bastos, J. A. & Belinha, J., 2023, Proceedings of the 10th Congress of the Portuguese Society of Biomechanics, CNB 2023. Martins Amaro, A., Roseiro, L., Messias, A. L., Gomes, B., Almeida, H., António Castro, M., António Castro, M., Neto, M. A., de Fátima Paulino, M. & Maranha, V. (eds.). p. 3-15 13 p. (Lecture Notes in Bioengineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    A method to reduce computation time in finite element simulations of deep rolling

    Bialowas, J., Pletz, M., Gapp, S. & Maierhofer, J., 2023, In: Procedia Structural Integrity. 46, p. 49-55 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  27. Published

    Correlating crack density, stiffness degradation and dissipated energy during fatigue loading of ±45° GFRP laminates

    Gfrerrer, M., Wiener, J., Drvoderic, M., Brunner, A. J. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    Modeling fatigue damage in composite laminates

    Drvoderic, M., 2023

    Research output: Thesis › Doctoral Thesis

  29. 2022
  30. Published

    Simplified Damage Assessment Tool for Rails and Crossings Based on Standard Wear and RCF Models

    Schnalzger, G., Daves, W., Maierhofer, J., Ossberger, U., Ossberger, H., Bucher, C. & Pletz, M., 16 Dec 2022, In: Metals. 12.2022, 12, 20 p., 2169.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Process Optimization of Injection Overmolding Structural Electronics with Regard to Film Distortion

    Hubmann, M., Madadnia, B., Groten, J., Pletz, M., Vanfleteren, J., Stadlober, B., Bossuyt, F., Kaur, J. & Lucyshyn, T., 22 Nov 2022, In: Polymers. 14.2022, 23, 20 p., 5060.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Ingested microplastics: Do humans eat one credit card per week?

    Pletz, M., 19 Nov 2022, (E-pub ahead of print) In: Journal of hazardous materials letters. 3.2022, November, 5 p., 100071.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Version 0.2 - CrackDect: Detecting crack densities in images of fiber-reinforced polymers

    Drvoderic, M., Bender, J. J., Pletz, M. & Schuecker, C., 9 Sept 2022, (E-pub ahead of print) In: SoftwareX. 19.2022, July, 2 p., 101198.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Efficient prediction of crack initiation from arbitrary 2D notches

    Rettl, M., Pletz, M. & Schuecker, C., Jun 2022, In: Theoretical and Applied Fracture Mechanics. 119.2022, June, 16 p., 103376.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Efficient Finite Element Modeling of Steel Cables in Reinforced Rubber

    Pletz, M., Frankl, S. M. & Schuecker, C., 24 May 2022, (E-pub ahead of print) In: Journal of composites science. 6.2022, 6, 20 p., 152.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Matrix–fiber interfacial debonding in soft composite materials: Cyclically behavior modeling and microstructural evolution

    Mansouri, M. R., Fuchs, P. F., Baghani, M. & Schuecker, C., 15 May 2022, In: Composites Part B: Engineering. 237.2022, 15 May, 12 p., 109853.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials

    Pletz, M. & Arbeiter, F. J., 3 May 2022, In: Materials. 15.2022, 9, 13 p., 3273.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Improved concept for iterative crack propagation using configurational forces for targeted angle correction

    Frankl, S. M., Pletz, M. & Schuecker, C., 1 May 2022, In: Engineering Fracture Mechanics. 266.2022, 1 May, 15 p., 108403.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Assessing Failure in Steel Cable-Reinforced Rubber Belts Using Multi-Scale FEM Modelling

    Frankl, S. M., Pletz, M., Wondracek, A. & Schuecker, C., 20 Jan 2022, (E-pub ahead of print) In: Journal of composites science. 6.2022, 2, 13 p., 34.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Modeling Stiffness Degradation of Fiber-Reinforced Polymers Based on Crack Densities Observed in Off-Axis Plies

    Drvoderic, M., Pletz, M. & Schuecker, C., Jan 2022, In: Journal of composites science. 6.2022, 1, 15 p., 6010010.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Dynamic Mechanical Response in Epoxy Nanocomposites Incorporating Various Nano-Silica Architectures

    Chaudhary, S., Vryonis, O., Vaughan, A. S., Andritsch, T. & Feuchter, M., 2022, ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings. Institute of Electrical and Electronics Engineers, p. 86-89 4 p. (ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Prediction of the failure behaviour in steel cable reinforced rubber components using the Finite Element Method

    Frankl, S. M., 2022

    Research output: Thesis › Doctoral Thesis

  43. Published

    Tactile friction of UV-curable coatings and its relation to surface hardness

    Ules, T., Grießer, M., Schlögl, S. & Gruber, D. P., 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. 2021
  45. Published

    Development of 3D-printed (FFF) devices to fight COVID-19 transmission

    Pais, A. I., Castro Pires, V., Ferreira, C., Silva, V., Alves, J. L., Bastos, J. A. & Belinha, J., 19 Oct 2021, CRC Press.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    CrackDect: Detecting crack densities in images of fiber-reinforced polymers

    Drvoderic, M., Rettl, M., Pletz, M. & Schuecker, C., 13 Oct 2021, In: SoftwareX. 16.2021, December, 6 p., 100832.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Efficient 3d finite element modeling of cyclic elasto-plastic rolling contact

    Meyer, K. A., Skrypnyk, R. & Pletz, M., Sept 2021, In: Tribology International. 161.2021, September, 12 p., 107053.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance

    Wang, P., Yu, S., Shergill, J., Chaubey, A., Eckert, J., Prashanth, K. G. & Scudino, S., 15 Jul 2021, In: Acta metallurgica Sinica (English letters).

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Investigating the influence of surface hardness and energy on the perceived stickiness of polymer coatings.

    Griesser, M., Ules, T., Schlogl, S. & Gruber, D. P., 6 Jul 2021, 2021 IEEE World Haptics Conference, WHC 2021. Institute of Electrical and Electronics Engineers, p. 1148 1 p. (2021 IEEE World Haptics Conference, WHC 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Self-Reducing Silver Ink on Polyurethane Elastomers for the Manufacture of Thin and Highly Stretchable Electrical Circuits

    Krawczyk, K. K., Groten, J., Glushko, O., Krivec, M., Frühwirth, M., Schulz, G., Wolf, C., Hartmann, D., Moser, M., Cordill, M. J., Stadlober, B. & Griesser, T., 22 Mar 2021, In: Chemistry of materials. 33.2021, 8, p. 2742-2755 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks

    Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Mechanical Behavior of Hyperelastic Fiber-Reinforced Composites

    Mansouri, M. R., 2021

    Research output: Thesis › Doctoral Thesis

  53. Published

    Quantification of tactile surface perception with a focus on contact area analysis via neural networks

    Ules, T., Haselmann, M., Grießer, M., Hausberger, A., Schlögl, S. & Gruber, D. P., 2021.

    Research output: Contribution to conference › Poster › Research

  54. Published

    Simultaneous Structural and Material Optimization

    Lang, M. C., 2021

    Research output: Thesis › Doctoral Thesis

  55. 2020
  56. Published

    A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting

    WANG, P., ECKERT, J., PRASHANTH, K. G., WU, M. W., KABAN, I., XI, L. X. & SCUDINO, S., Aug 2020, In: Transactions of Nonferrous Metals Society of China (English Edition). 30, 8, p. 2001-2034 34 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2501