Werner Ecker

(Former)

1 - 50 out of 52Page size: 50

Research output

  1. 2020
  2. Published

    Elasto-Viscoplastic Material Model of a Directly-Cast Low-Carbon Steel at High Temperatures

    Krobath, M., Krobath, R., Bernhard, C. & Ecker, W., 15 May 2020, In: Materials. 13.2020, 10, 13 p., 2281.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    An SEM compatible plasma cell for in situ studies of hydrogen-material interaction

    Massone, A., Manhard, A., Jacob, W., Drexler, A., Ecker, W., Hohenwarter, A., Wurster, S. & Kiener, D., 10 Apr 2020, (E-pub ahead of print) In: Review of scientific instruments. 91.2020, 4, 043705.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2018
  5. Published

    Deep drawing of press hardening steels

    Tomasch, M., Ecker, W., Kaiser, R. & Antretter, T., 2018, Journal of Physics: Conference Series. IOP Publishing Ltd., Vol. 1063. 012038

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. 2017
  7. E-pub ahead of print

    Resolving alternating stress gradients and dislocation densities across AlxGa1-xN multilayer structures on Si(111)

    Reisinger, M., Tomberger, M., Zechner, J., Daumiller, I., Sartory, B., Ecker, W., Keckes, J. & Lechner, R. T., 16 Oct 2017, (E-pub ahead of print) In: Applied physics letters. 111.2017, 16, p. 162103 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Prediction and Characterization of Residual Stresses after Heat Treatment of Massive Hot Work Tool Steel Components

    Schemmel, M., Antretter, T., Ecker, W. & Prevedel, P., 19 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates

    Kaltenbrunner, T., Ecker, W., Antretter, T., Kaiser, R., Parteder, E. & Egger, R., 2017, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Numerical analysis of the rock cutting process based on a two-parameter description of tensile strength

    Pittino, G., Galler, R., Antretter, T., Mikl-Resch, M. J., Tichy, R., Ecker, W., Gimpel, M. & Kargl, H., 2017, Proceedings of 13th ISRM International Congress of Rock Mechanics 2015. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. 2016
  12. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction

    Reisinger, M., Zalesak, J., Daniel, R., Tomberger, M., Weiss, J. K., Darbal, A. D., Petrenec, M., Zechner, J., Daumiller, I., Ecker, W., Sartory, B. & Keckes, J., 2016, In: Materials and Design. 106, p. 476-481 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of the levelling process on the mechanical properties of heavy steel plates

    Kaltenbrunner, T., Antretter, T., Ecker, W., Kaiser, R., Gänser, H.-P. & Parteder, E., 2016, Proceedings of Rolling '16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. 2015
  16. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Tichy, R., Antretter, T., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 13 May 2015. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  17. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015, ISRM 2015_PROCEEDINGS. 5 p. 724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015. 5 p.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Numerical calibration of a yield limit function for rock materials by means of the Brazilian test and the uniaxial compression test

    Mikl-Resch, M. J., Antretter, T., Gimpel, M., Kargl, H., Pittino, G., Tichy, R., Ecker, W. & Galler, R., 2015, In: International Journal of Rock Mechanics and Mining Sciences. 74, p. 24-29

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Size effects in residual stress formation during quenching of cylinders made of hot-work tool steel

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2015, In: Advances in Materials Science and Engineering. 7 p., 678056.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The rock cutting process of road headers - Overview of laboratory tests and numerical simulation

    Pittino, G., Galler, R., Mikl-Resch, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M. & Kargl, H., 2015, Future Development of Rock Mechanics: Proceedings of the ISRM Regional Symposium Eurock 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Eigenverlag, p. 243-248 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film

    Steffenelli, M., Daniel, R., Ecker, W., Kiener, D., Todt, J., Zeilinger, A., Mitterer, C., Burghammer, M. & Keckes, J., 2015, In: Acta materialia. 85, p. 24-31

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Yield stress evolution in Inconel 718 samples under standard heat treatment process conditions of turbine disks

    Drexler, A., Maderbacher, H., Povodon-Karadeniz, E., Gänser, H. P., Ecker, W., Oberwinkler, B. & Fischersworring-Bunk, A., 2015, European Conference on Heat Treatment 2015 and 22nd IFHTSE Congress - Heat Treatment and Surface Engineering from Tradition to Innovation. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2014
  25. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Festigkeitsskalierung nach Weibull

    Pittino, G., Tichy, R., Galler, R., Antretter, T., Ecker, W., Gimpel, M. & Kargl, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Modelling of phase transformations and residual stress formation in hot-work tool steel components

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2014, European Conference of Heat Treatment and 21st IFHTSE Congress. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. 2013
  29. Published

    Development and testing of a technique for the simulation of the rock cutting process

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Proceedings of Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Development and testing of a technique fort he simulation oft he rock cutting process

    Mikl, M., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Different microstructures in the HAZ of double submerged arc welded pipelines and how they influence the fatigue crack growth

    Maier, B., Guster, C., Tichy, R. & Ecker, W., 2013,

    Proceedings of the ASME 2013 Pressure Vessels & Piping Conference (PVP2013)

    .     p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Entwicklung und Test einer Methode zur Simulation des Gesteinsschneidens mit der Finiten Elemente Methode

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M., Kargl, H., Pittino, G. & Galler, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 507-513

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of different microstructures of the welding zone on the fatigue crack growth behaviour of HSLA steels

    Maier, B., Guster, C., Tichy, R. & Ecker, W., 2013, 13th International Conference on Fracture - Abstract Book. p. 211-211

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Numerical Simulations in the field of Geotechnics and Underground Engineering - Examples of Research and Development Projects

    Galler, R., Volderauer, C., Marcher, T., Kargl, H., Gimpel, M., Mikl, M., Ecker, W., Tichy, R., Antretter, T., Gschwandtner, G., Pittino, G., Entacher, M., Lorenz, S., Schuller, E. & Mödlhammer, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 189-197

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Some Examples for Advanced Numerical Solutions Pushing the Limits of Commercial Software

    Antretter, T., Hasenhütl, E., Eßl, W., Hofmann, A., Ecker, W., Heiss, C., Galler, R. & Parteder, E., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 211-214

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: a critical comparison

    Steffenelli, M., Todt, J., Riedl, A., Ecker, W., Müller, T., Daniel, R., Burghammer, M. & Keckes, J., 2013, In: Journal of applied crystallography. 46, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2012
  38. Published

    Active slip systems in crystal plasticity and the principle of maximum dissipation

    Orthaber, M., Antretter, T., Gänser, H.-P. & Ecker, W., 2012, Proceeding of the 5th International Conference from Scientific Computing to Computational Engineering. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    CRYSTAL PLASTICITY AND THE MAXIMUM RATE OF DISSIPATION

    Gänser, H.-P., Antretter, T., Ecker, W. & Orthaber, M., 2012, Book of Abstracts of 10th World Congress on Computational Mechanics. p. 100-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Crystal Plasticity using the Principle of Maximum Dissipation

    Orthaber, M., Antretter, T. & Ecker, W., 2012, Book of Abstracts of ESMC-2012 - 8th European Solid Mechanics Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Development of a FE-based fracture mechanical method for fatigue life assessment of double-submerged welded pipelines considering residual stresses and local microstructures

    Maier, B., Oberwinkler, B., Tichy, R. & Ecker, W., 2012, 19th European Conference on Fracture - Book of Abstracts. p. 114-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Experimental and numerical investigation of damage due to thermo mechanical fatigue of brake disks for railway applications

    Raninger, P., Ecker, W. & Antretter, T., 2012, Proceedings of 3rd Fatigue Symposium. p. 236-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Interaction of heat checks in aluminum pressure casting dies and their effect on fatigue life

    Raninger, P., Ecker, W., Antretter, T., Leindl, M. & Ebner, R., 2012, Key engineering materials. Vol. 488-489. p. 626-629 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  44. Published

    Numerical simulation of crack growth in polyethylene composites by means of the cohesive zone model

    Janko, M., Ecker, W., Pinter, G. & Kolednik, O., 2012, In: Macromolecular Symposia. 311, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G. A., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S. & Burghammer, M., 2012, In: Scripta materialia. 67, p. 748-751

    Research output: Contribution to journal › Article › Research › peer-review

  46. 2011
  47. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulation

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulations

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  49. 2010
  50. Published

    Fatigue damage mechanisms and damage evolution near cyclically loaded edges

    Ebner, R., Gruber, P., Ecker, W., Kolednik, O., Krobath, M. & Jesner, G., 2010, In: Bulletin of the Polish Academy of Sciences / Technical sciences. 58, 2, p. 267-279

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2009
  52. Published

    Effect of Material Properties on the Thermo-Mechanical Loading and Damage of Pressure Casting Dies – A Numerical Study

    Ecker, W., Leindl, M., Antretter, T., Ebner, R., Siller, I. & Nisslé, S., 2009, Proceedings of the 8th International Tooling Conference. p. 927-939

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Entwicklung eines Testverfahrens zur Untersuchung der Schädigungsentwicklung in einem Stanzwerkzeug

    Gruber, P. J., Hatzenbichler, T., Ecker, W., Jesner, G., Ebner, R. & Kolednik, O., 2009, Entwicklung eines Testverfahrens zur Untersuchung der Schädigungsentwicklung in einem Stanzwerkzeug. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 99-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Loading conditions and damage evolution near the edge of a stamping tool - new experiments and numerical simulations

    Gruber, P. J., Ecker, W., Krobath, M., Marsoner, S., Jesner, G., Ebner, R. & Kolednik, O., 2009, Loading conditions and damage evolution near the edge of a stamping tool - new experiments and numerical simulations. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. 2008
  56. Published

    Modeling of the thermo-mechanical behavior of pressure casting dies

    Ecker, W., 2008

    Research output: Thesis › Doctoral Thesis

  57. Published

    Numerical Investigation of Thermal Cracks in Pressure Die Casting Tools

    Leindl, M., Ecker, W., Antretter, T. & Ebner, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken

    Leindl, M., Ecker, W., Ebner, R. & Antretter, T., 2008, Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken. p. 157-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. 2007
  60. Published

    Calibration and validation of an elasto-viscoplastic material model for a hot work tool steel used in pressure casting dies

    Ecker, W., Antretter, T. & Ebner, R., 2007, Key engineering materials. Vol. 345-346. p. 685-688 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  61. Published

    Simulation des Wärmeübergangs beim Sprühen im Druckgießprozess

    Hofer, P., Kaschnitz, E., Ecker, W. & Leindl, M., 2007, In: Gießerei-Rundschau. p. 166-168

    Research output: Contribution to journal › Article › Research › peer-review

  62. 2006
  63. Published

    Bestimmung von Materialparametern für poröse Werkstoffe

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, XXV. Verformungskundliches Kolloquium. p. 239-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Determination of Material Parameters for porous Materials

    Hatzenbichler, T., Planitzer, F., Buchmayr, B., Köppl, R. & Ecker, W., 2006, ESAFORM 2006. p. 155-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (52)