Velislava Terziyska

1 - 30 out of 30Page size: 50

Research output

  1. 2025
  2. Published

    Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatings

    Burtscher, M., Kainz, C., Dorner, P., Fellner, S., Terziyska, V., Alfreider, M. & Kiener, D., 8 Jan 2025, In: Journal of Materials Research and Technology. 35.2025, March-April, p. 369-378 10 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. E-pub ahead of print

    A new approach for in situ electrochemical nanoindentation: Side charging as a promising alternative

    Zeiler, S., Jelinek, A., Terziyska, V., Schwaiger, R., Mitterer, C., Brinckmann, S. & Maier-Kiener, V., 14 Jun 2024, (E-pub ahead of print) In: Acta materialia. 276.2024, 1 September, 9 p., 120113.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Short-Time Magnetron Sputtering for the Development of Carbon–Palladium Nanocomposites

    Knabl, F., Kostoglou, N., Terziyska, V., Hinder, S. J., Baker, M., Bousser, E., Rebholz, C. & Mitterer, C., 12 Jan 2024, In: Nanomaterials. 14.2024, 2, 10 p., 164.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2023
  7. Published

    Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

    Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2021
  9. E-pub ahead of print

    Evolution of the microstructure of sputter deposited TaAlON thin films with increasing oxygen partial pressure

    Schalk, N., Saringer, C., Fian, A., Terziyska, V., Julin, J. & Tkadletz, M., 29 Apr 2021, (E-pub ahead of print) In: Surface & coatings technology. 418.2021, 25. July, 7 p., 127237.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Improved electro-mechanical reliability of flexible systems with alloyed Mo-Ta adhesion layers

    Kreiml, P., Rausch, M., Terziyska, V., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M. J., 9 Jan 2021, (E-pub ahead of print) In: Thin solid films. 720.2021, 28 February, 9 p., 138533.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2020
  12. Published

    Microstructural Effects on the Interfacial Adhesion of Nanometer-Thick Cu Films on Glass Substrates: Implications for Microelectronic Devices

    Lassnig, A., Terziyska, V. L., Zalesak, J., Jörg, T., Toebbens, D. M., Griesser, T., Mitterer, C., Pippan, R. & Cordill, M. J., 28 Dec 2020, In: ACS Applied Nano Materials. 4.2021, 1, p. 61-70 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Molecular Coverage Determines Sliding Wear Behavior of n-Octadecylphosphonic Acid Functionalized Cu–O Coated Steel Disks against Aluminum

    Prünte, S., Music, D., Terziyska, V., Mitterer, C. & Schneider, J. M., 1 Jan 2020, In: Materials. 13.2020, 2, 10 p., 280.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Balancing the electro-mechanical and interfacial performance of Mo-based alloy films

    Kreiml, P., Rausch, M., Terziyska, V., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M., 2020, In: Materialia. 12.2020, August, 7 p., 100774.

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2019
  16. Published

    Correlation of mechanical damage and electrical behavior of Al/Mo bilayers subjected to bending

    Kreiml, P., Rausch, M., Terziyska, V. L., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M. J., 1 Oct 2019, In: Thin solid films. 687.2019, 1 October, 9 p., 137480.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Thermal stability of immiscible sputter-deposited Cu-Mo thin films

    Souli, I., Gruber, G., Terziyska, V., Zechner, J. & Mitterer, C., 30 Apr 2019, In: Journal of alloys and compounds. 793.2019, April, p. 208-218 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Compressive and tensile bending of sputter deposited Al/Mo bilayers

    Kreiml, P., Rausch, M., Terziyska, V., Winkler, J., Mitterer, C. & Cordill, M., 15 Mar 2019, In: Scripta materialia. 162.2019, March, p. 367-371 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2018
  20. E-pub ahead of print

    Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques

    Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dec 2018, (E-pub ahead of print) In: Surface & coatings technology. 315.2019, February, p. 155-161 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Electro-mechanical behavior of Al/Mo bilayers studied with in situ straining methods

    Kreiml, P., Rausch, M., Terziyska, V., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M., 2018, In: Thin solid films. p. 131-136

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Microstructure and physical properties of sputter-deposited Cu-Mo thin films

    Souli, I., Terziyska, V., Zechner, J. & Mitterer, C., 2018, In: Thin solid films. p. 301-308

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Microstructure, mechanical properties and cutting performance of Cr1-yTayN single layer and Ti1-xAlxN/Cr1-yTayN multilayer coatings

    Schalk, N., Pohler, M., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2018, In: International journal of refractory metals & hard materials. p. 211-216

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2017
  25. Published

    Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Robl, W., Zechner, J. & Mitterer, C., 9 Feb 2017, In: Journal of vacuum science & technology / B (JVST). 35.2017, 2, 11 p., 022201.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Microstructure, mechanical properties and application behavior of Cr1-xTaxN hard coatings

    Pohler, M., Schalk, N., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2017, 19th Plansee Seminar. p. 53/1-53/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage

    Kostoglou, N., Koczwara, C., Prehal, C., Terziyska, V., Babic, B., Matovic, B., Constantinides, G., Tampaxis, C., Charakambopoulou, G., Steriotis, T., Hinder, S., Baker, M., Polychronopoulou, K., Doumanidis, C. C., Paris, O., Mitterer, C. & Rebholz, C., 2017, In: Nano Energy. 40.2017, October, p. 49-64 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2016
  29. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 27 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Combinatorial synthesis of Cr1−xAlxN and Ta1−xAlxN coatings using industrial scale co-sputtering

    Schalk, N., Weirather, T., Sabitzer, C., Hirn, S., Terziyska, V., Gangopadhyay, S., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2016, In: Surface engineering. 32, 4, p. 252-257 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Design of multilayer metallization to reduce mechanical loading: Effect of growth conditions on interface stability and thermo-mechanical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Zechner, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Jakopic, G., Fian, A., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Acta materialia. 119, p. 26-34 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter-deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Journal of physics / D, Applied physics. 49, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2015
  35. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter-deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J. F. T., Holec, D., Fian, A., Jakopic, G., Terziyska, V. L., Daniel, R. & Mitterer, C., 2015, In: Journal of physics / D, Applied physics.

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2014
  38. Published

    Funktionale Schichten für das Automobil

    Mitterer, C., Saringer, C., Franz, R., Jantschner, O., Terziyska, V. & Daniel, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Hartstoffschichten

    Mitterer, C., Terziyska, V., Großmann, B., Zeilinger, A., Hirn, S., Tkadletz, M., Gassner, M. & Schalk, N., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Sputtered Si-containing low-friction carbon coatings for elevated temperatures

    Jantschner, O., Field, S. K., Music, D., Terziyska, V., Schneider, J. M., Munnik, F., Zorn, K. & Mitterer, C., 2014, In: Tribology International. 77, p. 15-23

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Zr-, Hf-, W- and Mo-alloyed Ti-Al hard coatings for high temperature cutting

    Kaindl, R., Waldhauser, W., Terziyska, V., Mitterer, C., Neubauer, E., Kitzmantel, M. & Köpf, A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

View graph of relations

Contact

Phone: 4232

Latest Research Output

View more (30)