Robert Danzer

1 - 100 out of 224Page size: 100

Research output

  1. 2024
  2. Published

    Biaxial bending strength testing of uniaxially curved thin plates using a modified ball on three balls test

    Supancic, P., Maurer, F. & Danzer, R., 1 Sept 2024, In: Journal of non-crystalline solids. 639, 123067.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2023
  4. Published

    A brief guide to conducting failure analysis on ceramic components

    Harrer, W., Morrell, R. & Danzer, R., 2023, In: Practical metallography = Praktische Metallographie. 60, p. 580-593

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2022
  6. Published

    Development of Ceramic Electrodes for Spark Plugs: Materials Selection

    Harrer, W., Tilz, A., Engelmayer, M., Gruber, M., Danzer, R. & Fimml, W., 2022, In: Ceramic forum international (CFI). 99, 6, p. E1-E6

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2020
  8. Published

    A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

    Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Strength of additive manufactured alumina

    Schlacher, J., Lube, T., Harrer, W., Mitteramskogler, G., Schwentenwein, M., Danzer, R. & Bermejo, R., 21 Apr 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 14, p. 4737-4745 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Montanuniversität Leoben: Der Lehrstuhl für Struktur- und Funktionskeramik

    Danzer, R. & Bermejo, R., 2020, In: Ceramic forum international (CFI). 97, 5-6, p. D1-D3

    Research output: Contribution to journal › Letter

  11. 2019
  12. Published

    Strength of Lithography-Based Alumina

    Schlacher, J. C., Lube, T., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 9 Sept 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Schadensanalyse an einer Kompaktierwalze aus Siliziumnitrid

    Harrer, W., Morrell, R. & Danzer, R., 1 Apr 2019, In: Praktische Metallographie/Practical Metallography. 56.2019, 4, p. 262-275 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Biaxiale Festigkeitsprüfung von Keramiken

    Supancic, P. H., Lube, T. & Danzer, R., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Festigkeit von additiv gefertigtem Aluminiumoxid

    Lube, T., Schlacher, J. C., Harrer, W. S., Danzer, R., Mitteramslkogler, G. & Schwentenwein, M., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Das Institut für Struktur- und Funktionskeramik

    Danzer, R., 2019, 3 p. Leoben

    Research output: Other contribution › Transfer

  17. Published

    Franz Jeglitsch: Leoben, Politik und Gefüge

    Danzer, R., 2019, 3 p. Leoben

    Research output: Other contribution › Transfer

  18. 2018
  19. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. & Danzer, R., 1 Apr 2018, In: Praktische Metallographie/Practical Metallography. 55, 4, p. 192-202 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Corrigendum to "Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials" [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2018, In: Journal of the European Ceramic Society. p. 355-358 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Failure of Varistor Ceramics

    Danzer, R. & Supancic, P. H., 2018.

    Research output: Contribution to conference › Paper

  23. Published

    Fracture toughness of silicon nitride balls via thermal shock

    Strobl, S., Adlmann, F. A., Supancic, P., Lube, T., Danzer, R. & Schöppl, O., 2018, In: Journal of the European Ceramic Society. p. 1278–1287

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Franz Jeglitsch: Leoben, Politik und Gefüge

    Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 57-62

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Mechanische Eigenschaften von gedruckten Keramiken

    Lube, T., Schlacher, J., Harrer, W., Danzer, R., Mitteramskogler, G. & Schwentenwein, M., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 229-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Schadensanalyse an einer Kompaktierwalze aus Siliziumnitrid

    Harrer, W., Danzer, R. & Morrell, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 267-272

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2017
  28. Published

    Influence of machining and crack healing on the strength of a commercial SiC-ceramic

    Harrer, W. S., Danzer, R. & Prackwieser, R., 12 Jul 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Strength of Al2O3-Ceramic Produced by the LCM Additive Manufacturing Technology

    Lube, T., Schlacher, J. C., Harrer, W. S., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 12 Jul 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Chairside CAD/CAM materials. Part 2: flexural strength testing

    Belli, R., Wendler, M., Petschelt, A., Mevec, D., Lube, T., Harrer, W., Danzer, R. & Lohbauer, U., 2017, In: Dental Materials. 33, 1, p. 99-109 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fractography of zirconia-specimens made using additive manufacturing (LCM) technology

    Harrer, W. S., Schwentenwein, M., Lube, T. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 4331-4338

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses

    Krautgasser, C., Bermejo, R., Supancic, P. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 1873-1878 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. H. & Danzer, R., 2017, Praktische Metallographie Sonderband. Vol. 51. p. 85-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Strength Optimisation of a Zirconia-Ceramic Made Using Additive Manufacturing (LCM)-Technology

    Harrer, W., Schwentenwein, M. & Danzer, R., 2017, In: Ceramic forum international (CFI). 94, 10, p. E49-E54

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

    Strobl, S., Lube, T., Supancic, P., Schöppl, O. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5065-5070 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. 2016
  37. Published

    Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

    Bermejo, R., Daniel, R., Schuecker, C., Paris, O., Danzer, R. & Mitterer, C., 26 Dec 2016, In: Advanced engineering materials. 19, 4, 15 p., 1600683.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Mechanical properties of ceramics

    Danzer, R., 7 Dec 2016.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    What is tensile strength and how can it be determined

    Danzer, R., 12 Oct 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    Fracture toughness testing of ceramics - state of the art and new methods

    Danzer, R., 4 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    On the fracture toughness testing of ceramics

    Danzer, R., 21 Aug 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    On the tensile strength of ceramic materials/On the strength of ceramics, ceramic specimens and ceramic components

    Danzer, R., 13 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  43. Published

    Messung der Bruchzähigkeit von Keramiken: state of the Art und neue Methoden

    Danzer, R., 11 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    Die Messung der Bruchzähigkeit von Keramiken - State of the Art und neue Methoden

    Danzer, R., 7 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Zinc Oxide Varistors: Mechanical Failure and New Physical Effects

    Danzer, R., 24 Jan 2016.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    Biaxial strength testing of dental CAD/CAM block materials

    Wendler, M., Belli, R., Petschelt, A., Mevec, D., Harrer, W., Lube, T., Danzer, R. & Lohbauer, U., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Die Messung der Bruchzähigkeit von Keramiken: State of the Art und neue Methoden

    Danzer, R. & Lube, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  48. Published

    Effects of subcritical crack growth on the determination of fracture toughness in brittle materials

    Krautgasser, C., Chlup, Z., Supancic, P., Danzer, R. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 1307-1312 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of the surface condition on the biaxial strength of a commercial silicon carbide

    Harrer, W., Danzer, R. & Rendtel, A., 2016, In: Journal of the European Ceramic Society. 36, p. 3895-3900 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Mechanical properties of carbon brushes for electric engines

    Harrer, W., Reynvaan, S., Krautgasser, C. & Danzer, R., 2016, In: Ceramic forum international (CFI). 93, 4-5, p. E55-E60

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses

    Krautgasser, C., Danzer, R., Deluca, M., Supancic, P., Aldrian, F. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 4095-4105 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. 2015
  54. Published

    Thermography and complementary measurements as tools to detect micro-irregularities in electronic components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., Dec 2015, In: Journal of ceramic science and technology. 6, 4, p. 255-260 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  56. Published

    Festigkeits- und Zähigkeitsprüfung an keramischen Bauteilen: Prüfung von Kugellagerkugeln

    Danzer, R., 1 Aug 2015.

    Research output: Contribution to conference › Paper › peer-review

  57. Published

    Heat development at the microscale in ceramic components - thermography and complementary tools

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 1 Apr 2015

    Research output: Other contribution › Research

  58. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  59. Published

    Doktoratsstudium der montanistischen Wissenschaften

    Danzer, R., 2015, Wo aus Forschung Zukunft wird Festschrift zum Jubiläum "175 Jahre Montanuniversität Leoben". Leoben, M. (ed.). Leoben, Vol. 2, Lehre und Forschung. p. 62-65 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  60. Published

    Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Mark, T., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 275, p. 217-226

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Heat Treatment-Induced Improvement of the Thermal Shock Resistance of Si3N4 Tools for Metallurgical Applications

    Harrer, W., Danzer, R. & Berroth, K., 2015, In: Practical metallography = Praktische Metallographie. 52, 4, p. 191-204 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    High temperature mechanical properties of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 273, p. 237-243

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Influence of temperature and humidity on the strength of Low Temperature Co-fired Ceramics

    Krautgasser, C., Danzer, R., Supancic, P. & Bermejo, R., 2015, In: Journal of the European Ceramic Society. 35, p. 1823–1830

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Institut für Struktur- und Funktionskeramik

    Danzer, R., 2015, Wo aus Forschung Zukunft wird Festschrift zum Jubiläum "175 Jahre Montanuniversität Leoben". Leoben, M. (ed.). Leoben, Vol. 1, Die Entwicklung der Montanuniversität seit 1990. p. 232-235 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  65. Published

    On the Development of Experimental Methods for the Determination of Fracture Toughness Parameters of Ceramics

    Danzer, R., Lube, T. & Rasche, S., 2015, Recent Trends in Fracture and Damage Mechanics. Hütter, G. & Zybell, L. (eds.). Heidelberg: Springer, p. 197-214 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  66. Published

    Piezotronically Modified Double Schottky Barriers in ZnO Varistors

    Raidl, N., Supancic, P., Danzer, R. & Hofstätter, M., 2015, In: Advanced materials. 27, p. 2031-2035 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Strength of an Electrolyte Supported Solid Oxide Fuel Cell

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kuebler, J., 2015, In: Journal of power sources. 297, p. 158-167 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Thermography and Complemetary Measurements as Tool to Detect Micro-Irregularities in Electronic Components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 2015, In: Journal of ceramic science and technology. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  69. 2014
  70. Published

    Evaluation of subcritical crack growth in low temperature co-fired ceramics

    Bermejo, R., Supancic, P., Krautgasser, C. & Danzer, R., 10 Jan 2014, Mechanical Properties and Performance of Engineering Ceramics and Composites VIII - A Collection of Papers Presented at the 37th International Conf. on Advanced Ceramics and Composites, ICACC 2013. 2 ed. Vol. 34. p. 161-172 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    A new strength test for ceramic cylinders-The Notched Roller Test

    Strobl, S., Supancic, P., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 2575-2584

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Effect of residuel stresses on the strength of glass-ceramic multilayer composites different microstructures

    Bermejo Moratinos, R., Krautgasser, C., Deluca, M., Strobl, S., Kraleva, I., Petschenig, I., Aldrian, F., Supancic, P. & Danzer, R., 2014, Praktische Metallographie Sonderband. p. 169-174

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  73. Published

    Expertenstudie Zukunftspotentiale von Hochleistungskeramiken

    Danzer, R., 2014

    Research output: Book/Report › Commissioned report › Transfer

  74. Published

    Failure analysis of Electrolyte-Supported Solid Oxide Fuel Cells

    Fleischhauer, F., Tiefenauer, A., Mai, A., Danzer, R., Graule, T. & Kübler, J., 2014, In: Journal of power sources. p. 382-390

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Fractography of biaxial tested Si3N4-specimens

    Harrer, W., Morrell, R. & Danzer, R., 2014, In: Journal of the European Ceramic Society. 34, p. 3283-3289

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Mechanical Characterization of Ceramics: Designing with Brittle Materials

    Bermejo Moratinos, R. & Danzer, R., 2014, Comprehensive Hard Materials. p. 285-298

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  77. Published

    Mechanical Properties and Reliability of Advanced Ceramics

    Lube, T. & Danzer, R., 2014, Advanced Ceramics for Dentristry. p. 173-199

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  78. Published

    Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Micro four-point probe investigation of individual ZnO grain boundaries in avaristor ceramic

    Nevosad, A., Hofstätter, M., Supancic, P., Danzer, R. & Teichert, C., 2014, In: Journal of the European Ceramic Society. 34, p. 1963-1970

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    On the relationship between ceramic strength and tehe requirements for mechanical design

    Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 3435-3460

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Verbesserung der Thermoschockbeständigkeit von Si3N4-Werkzeugen für metallurgische Anwendungen durch eine Wärmebehandlung

    Danzer, R., Harrer, W. & Berroth, K., 2014, Praktische Metallographie Sonderband. p. 175-180

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  82. 2013
  83. Published

    Einfluss der Messunsicherheit auf die Ermittlung der Weibull-Verteilung

    Danzer, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Handbook of Advanced Ceramics - Materials, Applications, Processing, and Properties: 2nd Edition; Review

    Danzer, R. (Co-editor), 2013, Amsterdam: Elsevier.

    Research output: Book/Report › Book › Research

  85. Published

    Mechanical Properties of Ceramics

    Danzer, R., Lube, T., Morrell, R. & Supancic, P., 2013, Handbook of Advanced Ceramics. Amsterdam: Elsevier, p. 609-632

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  86. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2013, Mechanical properties and performance of engineering ceramics and composites. Vol. VII. p. 163-174 (Ceramic engineering and science proceedings ; vol. 33, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

    Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, In: Engineering Fracture Mechanics. 100, p. 108-121

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Voltage polarity dependent current paths through polycrystalline ZnO varistors

    Hofstätter, M., Nevosad, A., Teichert, C., Supancic, P. & Danzer, R., 2013, In: Journal of the European Ceramic Society. 33, p. 3473-3476

    Research output: Contribution to journal › Article › Research › peer-review

  89. 2012
  90. Published

    An assessment of in vivo failures of alumnia ceramic total hip joint replacements

    Morrell, R., Danzer, R., Milosev, I. & Trebse, R., 2012, In: Journal of the European Ceramic Society. 32, p. 3073-3084

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Effect of Crack Healing on the Strength of a Si3N4-Material used for Applications in the Metallurgical Industry

    Harrer, W., Danzer, R. & Berroth, K., 2012, In: Ceramic forum international (CFI). 89, p. E29-E33

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Experimental approach to assess the effect of metallization on the strength of functional ceramic components

    Bermejo Moratinos, R., Supancic, P., Aldrian, F. & Danzer, R., 2012, In: Scripta materialia. 66, p. 546-549

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Influence of measurement uncertainties on the determination of the Weibull modulus

    Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 251-255

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Influence of surface defects on the biaxial strength of a silicon nitride ceramic - increase of strength by crack healing

    Harrer, W., Danzer, R. & Morrell, R., 2012, In: Journal of the European Ceramic Society. 32, p. 27-35

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Layered ceramics with internal compressive stresses to improve strength and toughness

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Seveck, O. & Danzer, R., 2012, International Conference on Advanced Ceramics and Composites. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength

    Lube, T., Witschnig, S., Supancic, P., Danzer, R. & Schöppl, O., 2012, Fractography of Glasses and Ceramics VI. p. 225-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  100. Published

    Thermal Shock Behaviour of Si3N4-Specimens - Influence of Annealing and Edges

    Harrer, W., Danzer, R. & Berroth, K., 2012, Fractography of Glasses and Ceramics VI. p. 245-254

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  101. Published

    Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2011
  103. Published

    10. Tagung Gefüge und Bruch

    Panzenböck, M. (Co-editor), Danzer, R. (Co-editor) & Pohl, M. (Co-editor), 2011, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  104. Published

    Bruch von Keramiken aufgrund von Kontaktschädigung am Beispiel von Hüftgelenksimplantaten

    Danzer, R., Harrer, W. & Lube, T., 2011, Tagungsskript 10. Tagung Gefüge und Bruch. p. 127-133

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die Festigkeit

    Bermejo Moratinos, R., Sestakova, L., Kraleva, I., Supancic, P. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  106. Published

    Einfluss von Oberflächendefekten auf die biaxiale Festigkeit von Hochleistungskeramiken-Festigkeitssteigerung durch Rissheilen

    Harrer, W. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  107. Published

    Evaluation of the Strength of Low Temperature Co-fired Ceramics under Biaxial Stress

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Krautgasser, C., Aldrian, F., Morrell, R. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  108. Published

    Failure analysis of silicon nitride rings for hot rolling of highly alloyed steel and superalloys

    Harrer, W., Morrell, R., Lengauer, M., Danzer, R., Berroth, K. & Zleppnig, W., 2011, In: Engineering Failure Analysis. p. 138-147

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, Key engineering materials. Vol. 465. p. 41-46 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  110. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Keramik im Walzwerk

    Danzer, R., Harrer, W. & Lengauer, M., 2011, XXX. Verformungskundliches Kolloquium. p. 51-56

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  113. Published

    Neue Methodik zur Prüfung der Bruchzähigkeit keramischer Kugeln

    Danzer, R. & Strobl, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (224)