Peter Hans Supancic

51 - 100 out of 178Page size: 50

Research output

  1. 2015
  2. Published

    Lock-In Infrared Microscopy on ZnO Ceramics - A Complementary Investigation Technique for the Analysis of Functional Electroceramic Components

    Hofstätter, M., Raidl, N., Sartory, B. & Supancic, P., 2015, In: Microscopy and microanalysis. 21, p. 1145-1152 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Modelling The Piezotronically Modified I-V Characteristics of ZnO Varistor Ceramics

    Raidl, N., Hofstätter, M. & Supancic, P., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Piezotronically Modified Double Schottky Barriers in ZnO Varistors

    Raidl, N., Supancic, P., Danzer, R. & Hofstätter, M., 2015, In: Advanced materials. 27, p. 2031-2035 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling

    Röhrig, S., Krautgasser, C., Bermejo, R., Jones, J. L., Supancic, P. & Deluca, M., 2015, In: Journal of the European Ceramic Society. 35, p. 4321-4325 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Thermography and Complemetary Measurements as Tool to Detect Micro-Irregularities in Electronic Components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 2015, In: Journal of ceramic science and technology. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Varistor piezotronics: Mechanically tuned conductivity in varistors

    Baraki, R., Novak, N., Hofstätter, M., Supancic, P., Rödel, J. & Frömling, T., 2015, In: Journal of applied physics. 118, 8, p. 085703 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2014
  9. Published

    Piezotronic Modification of Double-Schottky-Barriers in ZnO Varistor Ceramics

    Hofstätter, M., Raidl, N., Nevosad, A., Teichert, C. & Supancic, P., 16 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Evaluation of subcritical crack growth in low temperature co-fired ceramics

    Bermejo, R., Supancic, P., Krautgasser, C. & Danzer, R., 10 Jan 2014, Mechanical Properties and Performance of Engineering Ceramics and Composites VIII - A Collection of Papers Presented at the 37th International Conf. on Advanced Ceramics and Composites, ICACC 2013. 2 ed. Vol. 34. p. 161-172 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    A new strength test for ceramic cylinders-The Notched Roller Test

    Strobl, S., Supancic, P., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 2575-2584

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Current-voltage characteristics of zinc oxide varistors with respect to mechanical load

    Raidl, N., Hofstätter, M. & Supancic, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Effect of residuel stresses on the strength of glass-ceramic multilayer composites different microstructures

    Bermejo Moratinos, R., Krautgasser, C., Deluca, M., Strobl, S., Kraleva, I., Petschenig, I., Aldrian, F., Supancic, P. & Danzer, R., 2014, Praktische Metallographie Sonderband. p. 169-174

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Load Characteristics of Lead-Free Ceramic Multilayer Actuators Based on Bismuth–Sodium–Titanate

    Reichmann, K., Schütz, D., Deluca, M. & Supancic, P., 2014, In: International journal of applied ceramic technology. 11, p. 431-435

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Microanalysis on Functional Ceramics: Complementary Investigation Techniques on ZnO-based Varistor Ceramics

    Supancic, P., Raidl, N. & Hofstätter, M., 2014, Proc. of 11th EMAS Regional Workshop on Electron Probe Microanalysis of Materials Today. p. 313-325

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Micro four-point probe investigation of individual ZnO grain boundaries in avaristor ceramic

    Nevosad, A., Hofstätter, M., Supancic, P., Danzer, R. & Teichert, C., 2014, In: Journal of the European Ceramic Society. 34, p. 1963-1970

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    On Bürmann's theorem and its application to problems of linear and nonlinear heat transfer and diffusion - Expanding functions in powers of their derivative

    Schöpf, H. & Supancic, P., 2014, In: The mathematica journal. 16, p. 1-44

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Precise determination of phonon constants in lead-free monoclinic (K 0.5Na0.5)NbO3 single crystals

    Rafiq, M. A., Supancic, P., Costa, E. E., Vilarinho, P. M. & Deluca, M., 2014, In: Applied physics letters. 104, p. 011902-011902

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2013
  23. Published

    3D Netzwerksimulationen von Varistoren mit verschiedenen Korngrößenverteilungen

    Hofstätter, M. & Supancic, P., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 206-2010

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    C-AFM and KPFM approach to inverstigate the electrical properties of single grain boundaries in ZnO varistor devices

    Nevosad, A., Hofstätter, M., Wiessner, M., Supancic, P. & Teichert, C., 2013, Proc. of SPIE, Oxide-based Materials and Devices IV. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Effect of the electric conductivity on the modeling of the poling process of ferroelectric components

    Schwaab, H., Deluca, M., Supancic, P. & Kamlah, M., 2013, In: Journal of the mechanics and physics of solids. 61, p. 504-516

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Mechanical Properties of Ceramics

    Danzer, R., Lube, T., Morrell, R. & Supancic, P., 2013, Handbook of Advanced Ceramics. Amsterdam: Elsevier, p. 609-632

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

    Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, In: Engineering Fracture Mechanics. 100, p. 108-121

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Voltage polarity dependent current paths through polycrystalline ZnO varistors

    Hofstätter, M., Nevosad, A., Teichert, C., Supancic, P. & Danzer, R., 2013, In: Journal of the European Ceramic Society. 33, p. 3473-3476

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2012
  30. Published

    Effect of combined thermo-mechanical loading on the domain texture and the fracture resistance of lead zirconate titanate (PZT) ceramics

    Deluca, M., Krautgasser, C., Bermejo Moratinos, R., Foronda, H., Jones, J. & Supancic, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Exact implementation of subcritical crack growth into a Weibullian strength distribution under constant stress rate conditions

    Supancic, P. & Schöpf, H. M., 2012, In: Journal of the European Ceramic Society. 32, p. 4031-4040

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Experimental approach to assess the effect of metallization on the strength of functional ceramic components

    Bermejo Moratinos, R., Supancic, P., Aldrian, F. & Danzer, R., 2012, In: Scripta materialia. 66, p. 546-549

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Influence of measurement uncertainties on the determination of the Weibull modulus

    Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 251-255

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Macroscopical non-linear material model for ferroelectric materials inside a hybrid finite element formulation

    Schwaab, H., Grünbichler, H., Supancic, P. & Kamlah, M., 2012, In: International journal of solids and structures. 49, p. 457-469

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Microscopical investigation of grain boundaries in ZnO varistor ceramics

    Nevosad, A., Hofstätter, M., Supancic, P. & Teichert, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    New Self-regulating Ceramic PTC Thermistor Heating Elements with Strongly Improved Performance

    Röhrig, S. & Supancic, P., 2012, In: Ceramic forum international (CFI). 89, p. E25-E29

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Polarity-dependent electrical characteristics of ZnO varistor ceramics

    Hofstätter, M., Nevosad, A., Auer, C., Piber, M. & Supancic, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength

    Lube, T., Witschnig, S., Supancic, P., Danzer, R. & Schöppl, O., 2012, Fractography of Glasses and Ceramics VI. p. 225-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

    Research output: Contribution to journal › Article › Research › peer-review

  42. 2011
  43. Published

    AFM Based Investigations of ZnO Varistor Ceramics

    Pavitschitz, A., Hofstätter, M., Supancic, P., Athenstaedt, W., Auer, C. & Teichert, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die Festigkeit

    Bermejo Moratinos, R., Sestakova, L., Kraleva, I., Supancic, P. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Effect of specimen size on the tensile strength of WC–Co hard metal

    Klünsner, T., Wurster, S., Supancic, P., Ebner, R., Jenko, M., Glätzle, J., Püschel, A. & Pippan, R., 2011, In: Acta materialia. 59, p. 4244-4252

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Evaluation of the Strength of Low Temperature Co-fired Ceramics under Biaxial Stress

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Krautgasser, C., Aldrian, F., Morrell, R. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, Key engineering materials. Vol. 465. p. 41-46 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of the Load Dependent Material Properties on the Performance of Multilayer Piezoelectric Actuators

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Krautgasser, C. & Supancic, P., 2011, IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials. p. 243-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Numerical investigation of the process of embedding components into printed circuit boards

    Pletz, M., Bermejo, R., Supancic, P., Stahr, J. & Morianz, M., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765814

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Morrell, R. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 745-753

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2010
  55. Published

    Fracture behaviour of low temperature cofired ceramics under biaxial loading: Influence of metal-ceramic internal architecture

    Bermejo, R., Kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 1 Dec 2010.

    Research output: Contribution to conference › Paper › peer-review

  56. Published

    Characterisation and modelling of the mechanical reliability of semiconductor components for Printed Circuit Boards

    Bermejo Moratinos, R., Deluca, M., pletz, M., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 4109

Latest Research Output

View more (178)